Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data storage data management”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Economic Assessment of Hydrogen Technologies Participating in California Electricity Markets

As the electric sector evolves and increasing amounts of variable renewable generation are installed on the system, there are greater needs for system flexibility and sufficient capacity, and greater concern for overgeneration from renewable sources not well matched in time with electric loads. Hydrogen systems have the potential to support the grid in each of these areas. However, limited information is available about the economic competitiveness of hydrogen system configurations. This paper quantifies the value for hydrogen energy storage and demand response systems to participate in select California wholesale electricity markets using 2012 data. For hydrogen systems and conventional storage systems (e.g., pumped hydro, batteries), the yearly revenues from energy, ancillary service, and capacity markets are compared to the yearly cost to establish economic competitiveness. Hydrogen systems can present a positive value proposition for current markets. Three main findings include: (1) For hydrogen systems participating in California electricity markets, producing and selling hydrogen was found to be much more valuable than producing and storing hydrogen to later produce electricity; therefore systems should focus on producing and selling hydrogen and opportunistically providing ancillary services and arbitrage. (2) Tighter integration with electricity markets generates greater revenues (i.e., systems that participate in multiple markets receive the highest revenue). (3) More storage capacity, in excess of what is required to provide diurnal shifting, does not increase competitiveness in current California wholesale energy markets. As more variable renewable generation is installed, the importance of long duration storage may become apparent in the energy price or through additional markets, but currently, there is not a sufficiently large price differential between days to generate enough revenue to offset the cost of additional storage. Future work will involve expanding to consider later year data and multiple regions to establish more generalized results.

25 ENERGY STORAGE↗

Optimal Sizing of Energy Storage and Photovoltaic Power Systems for Demand Charge Mitigation (Poster)

Commercial facility utility bills are often a strong function of demand charges -- a fee proportional to peak power demand rather than total energy consumed. In some instances, demand charges can constitute more than 50% of a commercial customer's monthly electricity cost. While installation of behind-the-meter solar power generation decreases energy costs, its variability makes it likely to leave the peak load -- and thereby demand charges -- unaffected. This then makes demand charges an even larger fraction of remaining electricity costs. Adding controllable behind-the-meter energy storage can more predictably affect building peak demand, thus reducing electricity costs. Due to the high cost of energy storage technology, the size and operation of an energy storage system providing demand charge management (DCM) service must be optimized to yield a positive return on investment (ROI). The peak demand reduction achievable with an energy storage system depends heavily on a facility's load profile, so the optimal configuration will be specific to both the customer and the amount of installed solar power capacity. We explore the sensitivity of DCM value to the power and energy levels of installed solar power and energy storage systems. An optimal peak load reduction control algorithm for energy storage systems will be introduced and applied to historic solar power data and meter load data from multiple facilities for a broad range of energy storage system configurations. For each scenario, the peak load reduction and electricity cost savings will be computed. From this, we will identify a favorable energy storage system configuration that maximizes ROI.

14 SOLAR ENERGY↗

Assimilation of GRACE Terrestrial Water Storage Data into a Land Surface Model: Results for the Mississippi River Basin

NASA's GRACE mission has the potential to be extremely valuable for water resources applications and global water cycle research. What makes GRACE unique among Earth Science satellite systems is that it is able to monitor variations in water stored in all forms, from snow and surface water to soil moisture to groundwater in the deepest aquifers. However, the space and time resolutions of GRACE observations are coarse. GRACE typically resolves water storage changes over regions the size of Nebraska on a monthly basis, while city-scale, daily observations would be more useful for water management, agriculture, and weather prediction. High resolution numerical (computer) hydrology models have been developed, which predict the fates of water and energy after they strike the land surface as precipitation and sunlight. These are similar to weather and climate forecast models, which simulate atmospheric processes. We integrated the GRACE observations into a hydrology model using an advanced technique called data assimilation. The results were new estimates of groundwater, soil moisture, and snow variations, which combined the veracity of GRACE with the high resolution of the model. We tested the technique over the Mississippi River basin, but it will be even more valuable in parts of the world which lack reliable data on water availability.

Zaitchik, Benjamin F.↗

Using temperature and flow fields to detect gas leakage from canisters containing spent nuclear fuel: Applications to RAMM-TM

The multi-physics STAR-CCM+ code has been used to simulate the temperature and flow fields in canister gas leakage experiments conducted by using a 1/4.5-scale model storage cask. The simulations were conducted at Argonne National Laboratory’s Laboratory Computing Resource Center, utilizing high-performance computing resources. Development of STAR-CCM+ simulation models for the 1/4.5-scale model cask is described herein, followed by validation of the simulation results against experimental data. Canister depressurization and thermal response during gas leakage are discussed, along with analyses of the leakage path and allowable leakage rate. The insights gained from the STAR-CCM+ simulations and leakage analyses will help guide future experiments and actual industry applications of Argonne’s Remote Area Modular Monitoring system for canister surface temperature measurement (RAMM-TM) to enable effective aging management of spent fuel during extended dry storage, as well as help reduce risks to public safety and health and protect the environment.

Canister gas leakage↗

Progress of Atomic and Molecular Physics for Chinese Scientific Data Community

We will report some progress of Atomic and Molecular Physics in China, especially for national needs such as astrophysics, energy, environment and medical physics research programs etc.. Various theoretical activities and experimental activities have been initiated by Chinese Research Association of Atomic and Molecular Data. For example, in order to manage huge sets of energy levels for atoms (atomic ions) required in our national energy and astrophysical research programs, we focus a manageable set of physical parameters in multichannel quantum defect theory (MQDT) based on which the huge atomic energy levels can be reproduced without missing any one. We also elucidate the physical meanings of such MQDT physical parameters which are related to scattering matrices of electron-ion collisions. Huge sets of collision data can also be managed. The scenario can also be extended to molecular data required in our national environmental research programs. In order to provide benchmark examinations of atomic and molecular data, we also report some progresses of atomic and molecular experimental measurements such as electron scattering experiments, storage ring experiments, laser spectroscopy and molecular beam experiments etc.. In order to pursue precise measurements in physics, there are also some attempts to set up atomic experiments by laser cooling techniques. Some atomic interference experiments are also reported.

74 ATOMIC AND MOLECULAR PHYSICS↗

dCache: Big Data storage for HEP communities and beyond

With over ten years in production use dCache data storage system has evolved to match ever changing lansdcape of continually evolving storage technologies with new solutions to both existing problems and new challenges. In this paper, we present three areas of innovation in dCache: providing efficient access to data with NFS v4.1 pNFS, adoption of CDMI and WebDAV as an alternative to SRM for managing data, and integration with alternative authentication mechanisms.

Millar, A. P.↗

FAODEL

FAODEL is a collection of libraries for implementing data management services on high-performance computing (HPC) platforms. It is composed of several components: (1) an RDMA portability library called NNTI for transporting data, (2) an in-application, restful API service, (3) a memory management library for network memory named Lunasa, (4) an asynchronous communication engine, and (5) a distributed key/blob service names Kelpie. Application developers may use these libraries to move data between the distributed nodes of one job to another, as well as to distributed storage resources. FAODEL is different than other communication libraries in that it supports both intra- and inter-job communication, features event-driven mechanisms, and provides high-level primitives for developers to reason about a platform’s distributed resources.

ECP↗

Biological Carbon Sequestration for Climate and Soil Health

The United States recently launched the Net Zero World Initiative on decarbonization. As temperatures and sea levels rise, strong action is needed to mitigate high atmospheric CO 2 levels. In response to this need, a joint workshop between the US Department of Energy’s Oak Ridge National Laboratory (ORNL) and Lawrence Berkeley National Laboratory (LBNL) was convened to assess the challenges and opportunities within biological carbon (C) capture. The virtual workshop on Biological Carbon Sequestration for Climate and Soil Health focused on three aspects of biological C capture research: natural systems, engineered systems, and modeling. For this workshop, the scope of natural systems included unmanaged (e.g., grasslands, wetlands, natural forests) and managed (e.g., agricultural lands, commercial forests, forest biofuels) ecosystems. The engineered systems group covered topics in genetically modified plants and microbes, synthetic microbiomes, and altered plant–microbe interactions for enhancing C capture, storage, and utilization. The modeling group focused on computational tools and data collection to predict and assess the effectiveness of new biocarbon sequestration advances. Participant expertise included plant and microbial systems biology, synthetic biology, soil biogeochemistry, and techno-economic analysis. Together, participants outlined key scientific advances in support of biological C capture and storage. Among the major findings of the meeting were the need to better measure C flux within natural, agricultural, and fabricated ecosystems for experimentation; better understand the role of soil composition, plant roots, and the rhizosphere (i.e., the soil surrounding the plant root) in the underground storage of organic C; and design plant–microbe systems for maximal C storage.

54 ENVIRONMENTAL SCIENCES↗

RESULTS FOR THE FIRST QUARTER 2009 TANK 50 WAC SLURRY SAMPLE: CHEMICAL AND RADIONUCLIDE CONTAMINANT RESULTS

This report details the chemical and radionuclide contaminant results for the characterization of the 2009 First Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Liquid Waste Operations (LWO) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. The following conclusions are drawn from the analytical results provided in this report: (1) The concentrations of the chemical and radioactive contaminants were all less than their respective WAC Targets or Limits except for Am-242m. (2) The radionuclide Am-242m was not detected; however, its detection limit is above the WAC Target given in Attachment 8.4. The higher detection limit was expected based on current analytical capabilities as stated in the Task Technical and Quality Assurance Plan (TTQAP). (3) The reported detection limit of isopropanol was lower than its WAC Limit for accident analysis but higher than its WAC concentration given in Table 4 for vault flammability. The higher detection limit was expected based on current analytical capabilities and is documented in the Task Technical and Quality Assurance Plan (TTQAP). (4) The reported detection limit for Isopar L is lower than its WAC limit for accident analysis in Appendix 8.1 but higher than its WAC concentration given in Table 3 in reference to vault flammability. The higher detection limit was expected based on current analytical capabilities as stated in the Task Technical and Quality Assurance Plan (TTQAP). (5) Isopar L and Norpar 13 have limited solubility in aqueous solutions making it difficult to obtain consistent and reliable sub-samples. The values reported in this memo are the concentrations in the sub-sample as detected by the GC/MS; however, the results may not accurately represent the concentrations of these analytes in Tank 50.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

GROUT TEMPERATURE MEASUREMENTS IN 105-R DISASSEMBLY BASIN D AND E CANAL

The 105-R Reactor Disassembly Basin Grout Placement Strategy Report (SRNL-TR-2009-00157) identifies various portions of the facility that will undergo an in-situ decommissioning process. The estimated residual radioactive contamination in the 105-R facility is shown in Figure 1. Cementitious grout formulations developed by SRNL are being used to immobilize and isolate the radioactive contamination in existing below grade portions of the 105-R building as shown by the gray-hatched area in Figure 2. A Zero Bleed flowable fill was formulated for both dry placement and for underwater placement. The first major area in the 105-R Disassembly Basin to undergo the grouting process was the D&E Canal and an underlying void space known as the Chase. Grout temperature data was needed to ensure that the grout mix design was on the correct grout curing trajectory to meet the material compressive strength requirement of 50 pounds per square inch. Initial grout temperature measurements were needed to confirm and optimize grout mix design fresh property characteristics; i.e. material strength, and set time. Grout curing temperature is an integrating fresh property characteristic that is used to estimate cementitious material strength in accordance with the Standard Practice for Estimating Concrete Strength by the Maturity Method, ASTM C 1074. The Maturity Method is used in the construction industry to estimate in-place strength of concrete to allow the start of critical construction activities; e.g. formwork removal, removal of cold weather protection, opening of roadways to traffic, etc. Applying this methodology provides an expeditious means to estimate in-place grout strength based on compressive strength laboratory results. The Maturity Method results define the relationship between strength-time and age-time that may be utilized in the field for estimating strength after a given time of placement. Maturation curves were developed under the 105-R Reactor Disassembly Basin Cementitious Materials Laboratory Test Plan (SRNL-TR-2009-00175) to establish grout mix maturation indices for this relationship. Temperature data collected from the D&E grout placement will be evaluated against these maturation indices in a subsequent analysis. Grout temperature data outside the maturation indices highlight the opportunity to adjust the grout mix design for future placements. The pre-existing grout placement will not be removed since this material will comply with strength requirements under the normal curing duration. SRNL designed a standalone measurement system to collect grout mass placement temperature data in the D&E Canal. Four vertical poles instrumented with thermocouples were positioned in the canal prior to grout placement. The thermocouples were connected to stand-alone, battery-powered data recorders mounted nearby that were configured to take temperature recordings every 10 minutes for up to 100 days. Unfortunately, after just 2 weeks, data collection was terminated because the thermocouple wires connecting the data loggers to the thermocouple poles were severed during construction activities. This report will highlight the unique challenges in designing a data collection system for the D&E canal, describe the temperature measurement system and its installation, and present calculated as well as measured temperature values.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A microprocessor controlled pressure scanning system

A microprocessor-based controller and data logger for pressure scanning systems is described. The microcomputer positions and manages data from as many as four 48-port electro-mechanical pressure scanners. The maximum scanning rate is 80 pressure measurements per second (20 ports per second on each of four scanners). The system features on-line calibration, position-directed data storage, and once-per-scan display in engineering units of data from a selected port. The system is designed to be interfaced to a facility computer through a shared memory. System hardware and software are described. Factors affecting measurement error in this type of system are also discussed.

Anderson, R. C.↗

A microprocessor controlled pressure scanning system

A microprocessor-based controller and data logger for pressure scanning systems is described. The microcomputer positions and manages data from as many as four 48-port electro-mechanical pressure scanners. The maximum scanning rate is 80 pressure measurements per second (20 ports per second on each of four scanners). The system features on-line calibration, position-directed data storage, and once-per-scan display in engineering units of data from a selected port. The system is designed to be interfaced to a facility computer through a shared memory. System hardware and software are described. Factors affecting measurement error in this type of system are also discussed.

Anderson, R. C.↗

NSSDC: Preserving time with technological advances

The National Space Science Data Center (NSSDC) has always striven to use the best methods and media currently available from data accessibility and archive management. The various advantages and disadvantages of four different media forms that have been used by NSSDC over 12 years of archiving and distributing of International Ultraviolet Explorer (IUE) data are discussed. The four media are nine track magnetic tape, IBM 3850 mass storage, Memorex 3480 18 track tape catridge, and the Sony 6.5 Gbyte Century optical disk. The CD-ROM medium is also discussed.

Perry, Charleen↗

Analysis of the request patterns to the NSSDC on-line archive

NASA missions, both for earth science and for space science, collect huge amounts of data, and the rate at which data is being gathered is increasing. For example, the EOSDIS project is expected to collect petabytes per year. In addition, these archives are being made available to remote users over the Internet. The ability to manage the growth of the size and request activity of scientific archives depends on an understanding of the access patterns of scientific users. The National Space Science Data Center (NSSDC) of NASA Goddard Space Flight Center has run their on-line mass storage archive of space data, the National Data Archive and Distribution Service (NDADS), since November 1991. A large world-wide space research community makes use of NSSDC, requesting more than 20,000 files per month. Since the initiation of their service, they have maintained log files which record all accesses the archive. In this report, we present an analysis of the NDADS log files. We analyze the log files, and discuss several issues, including caching, reference patterns, clustering, and system loading.

Johnson, Theodore↗

Open-Source Science-led Development of the Atmosphere Observing System (AOS) Mission Science Data System (SDS)

The Earth System Observatory (ESO) Atmosphere Observing System (AOS) mission will provide space-based and suborbital observations of collocated cloud, dynamic, precipitation and aerosol processing leading to improved weather, air quality, and climate predictions. The AOS Science Data System (SDS) will be a system of systems developed within the Cloud to manage the research and operational processing of AOS mission orbital and suborbital sensors and curate these data for reprocessing (e.g., in near real-time or by collection) and transfer them to a NASA Distributed Active Archive Center (DAAC) for long-term storage. Further, AOS SDS will follow guidelines provided by NASA Earth Science Data Systems (ESDS) program including standard conventions for data file formats, naming, and metadata to improve data interoperability, interpretability, usability, discovery, provenance, and spatiotemporal representativeness. The AOS mission follows NASA’s lead in making a commitment to Open-Source Science (OSS) including the sharing of data, software, and knowledge in an open and timely manner. Each of the AOS SDS system components will be developed with open-source concepts including components of SDS itself as well as AOS mission algorithms. Further, the AOS SDS assumes the role to lead and facilitate OSS activities for the AOS mission. This presentation describes the framework of the AOS SDS and its integral part in facilitating OSS within the AOS mission.

David Giles↗

Open-Source Science-led Development of the AOS Mission Science Data System (SDS)

The Earth System Observatory (ESO) Atmosphere Observing System (AOS) mission will provide space-based and suborbital observations of collocated cloud, dynamic, precipitation and aerosol processing leading to improved weather, air quality, and climate predictions. The AOS Science Data System (SDS) will be a system of systems developed within the Cloud to manage the research and operational processing of AOS mission orbital and suborbital sensors and curate these data for reprocessing (e.g., in near real-time or by collection) and transfer them to a NASA Distributed Active Archive Center (DAAC) for long-term storage. Further, AOS SDS will follow guidelines provided by NASA Earth Science Data Systems (ESDS) program including standard conventions for data file formats, naming, and metadata to improve data interoperability, interpretability, usability, discovery, provenance, and spatiotemporal representativeness. The AOS mission follows NASA’s lead in making a commitment to Open-Source Science (OSS) including the sharing of data, software, and knowledge in an open and timely manner. Each of the AOS SDS system components will be developed with open-source concepts including components of SDS itself as well as AOS mission algorithms. Further, the AOS SDS assumes the role to lead and facilitate OSS activities for the AOS mission. This presentation describes the framework of the AOS SDS and its integral part in facilitating OSS within the AOS mission.

David M. Giles↗

Detection and Socio-Economic Attribution of Groundwater Depletion in India

Groundwater is a critical resource for both consumption and food security in India, where groundwater management faces significant challenges due to climate change and anthropogenic activities. Although several studies explored groundwater variability in India, few have focused on the socioeconomic attribution of these changes, utilizing data from industries, population and water demand. In this study, trends in groundwater storage were examined by leveraging the largest in situ dataset ever collated in India from ~27,000 groundwater wells, satellite-based terrestrial-water-storage estimates, and hydrological model simulations. Five major hotspots of groundwater depletion across India were identified using in situ measurements and previously untapped socioeconomic datasets to attribute these trends. Approximately 16% of Indian groundwater monitoring stations exhibited systematically decreasing trends in groundwater levels. These hotspots are primarily concentrated in the northern and northwestern parts of India as well as in the states of Chhattisgarh, West Bengal, and Kerala. The north/northwestern hotspots have experienced a staggering loss of ~6.46 × 10^10 m3 of water over the past two decades. The factors contributing to this depletion include population growth, rapid urbanization, proliferation of factories and the expansion of agriculture.

Gautam Kunwar↗

The Geothermal Data Repository: Ten Years of Supporting the Geothermal Industry with Open Access to Geothermal Data

The Department of Energy's (DOE) Geothermal Data Repository (GDR) is celebrating its tenth anniversary! Over the last decade it has grown from the simple idea of storing public data in a centralized location to a valuable tool at the center of the US geothermal scientific community and an integral part of the DOE Geothermal Technologies Office (DOE GTO) project management strategy. Researchers funded by the DOE GTO have contributed over 1,300 data submissions to the GDR. These data have been used to further advancements in geothermal science, economic analysis, exploration, research, development, and operational efficiency. The adoption of open data methodologies and a data management strategy that prioritizes universal open access and standardized, interoperable data have further increased the value of GDR data, making them available across a distributed network of data sharing partners and improving their utility to other industries and related fields, including material science and space exploration. Incorporating feedback from users has been critical to the GDR's success, allowing it to grow over the years to meet the evolving needs of the geothermal community. This paper will explore some of many changes that occurred throughout the GDRs tenure and the lessons learned along the way, as well as highlight some of the new features and recent improvements that been implemented to support innovation, reduce duplication of effort, and advance the geothermal industry as a whole.

access↗