Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data inference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Measurements of low-mode asymmetries in the areal density of laser-direct-drive deuterium–tritium cryogenic implosions on OMEGA using neutron spectroscopy

Areal density is one of the key parameters that determines the confinement time in inertial confinement fusion experiments, and low-mode asymmetries in the compressed fuel are detrimental to the implosion performance. The energy spectra from the scattering of the primary deuterium–tritium (DT) neutrons off the compressed cold fuel assembly are used to investigate low-mode nonuniformities in direct-drive cryogenic DT implosions at the Omega Laser Facility. For spherically symmetric implosions, the shape of the energy spectrum is primarily determined by the elastic and inelastic scattering cross sections for both neutron-deuterium and neutron-tritium kinematic interactions. Two highly collimated lines of sight, which are positioned at nearly orthogonal locations around the OMEGA target chamber, record the neutron time-of-flight signal in the current mode. An evolutionary algorithm is being used to extract a model-independent energy spectrum of the scattered neutrons from the experimental neutron time-of-flight data and is used to infer the modal spatial variations (l = 1) in the areal density. Experimental observations of the low-mode variations of the cold-fuel assembly (ρL 0 + ρL 1 ) show good agreement with a recently developed model, indicating a departure from the spherical symmetry of the compressed DT fuel assembly. As a result, another key signature that has been observed in the presence of a low-mode variation is the broadening of the kinematic end-point due to the anisotropy of the dense fuel conditions.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Probing FeSi, a d -electron topological Kondo insulator candidate, with magnetic field, pressure, and microwaves

Recently, evidence for a conducting surface state (CSS) below 19 K was reported for the correlated d -electron small gap semiconductor FeSi. In the work reported herein, the CSS and the bulk phase of FeSi were probed via electrical resistivity ρ measurements as a function of temperature T , magnetic field B to 60 T, and pressure P to 7.6 GPa, and by means of a magnetic field-modulated microwave spectroscopy (MFMMS) technique. The properties of FeSi were also compared with those of the Kondo insulator SmB 6 to address the question of whether FeSi is a d -electron analogue of an f -electron Kondo insulator and, in addition, a “topological Kondo insulator” (TKI). The overall behavior of the magnetoresistance of FeSi at temperatures above and below the onset temperature T S = 19 K of the CSS is similar to that of SmB 6 . The two energy gaps, inferred from the ρ( T ) data in the semiconducting regime, increase with pressure up to about 7 GPa, followed by a drop which coincides with a sharp suppression of T S . Several studies of ρ( T ) under pressure on SmB 6 reveal behavior similar to that of FeSi in which the two energy gaps vanish at a critical pressure near the pressure at which T S vanishes, although the energy gaps in SmB 6 initially decrease with pressure, whereas in FeSi they increase with pressure. The MFMMS measurements showed a sharp feature at T S ≈ 19 K for FeSi, which could be due to ferromagnetic ordering of the CSS. However, no such feature was observed at T S ≈ 4.5 K for SmB 6 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Single Gaussian process method for arbitrary tokamak regimes with a statistical analysis

Abstract Gaussian process regression is a Bayesian method for inferring profiles based on input data. The technique is increasing in popularity in the fusion community due to its many advantages over traditional fitting techniques including intrinsic uncertainty quantification and robustness to over-fitting. This work investigates the use of a new method, the change-point method, for handling the varying length scales found in different tokamak regimes. The use of the Student’s t-distribution for the Bayesian likelihood probability is also investigated and shown to be advantageous in providing good fits in profiles with many outliers. To compare different methods, synthetic data generated from analytic profiles is used to create a database enabling a quantitative statistical comparison of which methods perform the best. Using a full Bayesian approach with the change-point method, Matérn kernel for the prior probability, and Student’s t-distribution for the likelihood is shown to give the best results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Massive neutrinos and degeneracies in Lyman-alpha forest simulations

Using a suite of hydrodynamical simulations with cold dark matter, baryons, and neutrinos, we present a detailed study of the effect of massive neutrinos on the 1-D and 3-D flux power spectra of the Lyman-α (Lyα) forest. The presence of massive neutrinos in cosmology induces a scale- and time-dependent suppression of structure formation that is strongest on small scales. Measuring this suppression is a key method for inferring neutrino masses from cosmological data, and is one of the main goals of ongoing and future surveys like eBOSS, DES, LSST, Euclid or DESI . The clustering in the Lyα forest traces the quasi-linear power at late times and on small scales. In combination with observations of the cosmic microwave background, the forest therefore provides some of the tightest constraints on the sum of the neutrino masses. However there is a well-known degeneracy between Σmν and the amplitude of perturbations in the linear matter power spectrum. We study the corresponding degeneracy in the 1-D flux power spectrum of the Lyα forest, and for the first time also study this degeneracy in the 3-D flux power spectrum. We show that the non-linear effects of massive neutrinos on the Lyα forest, beyond the effect of linear power amplitude suppression, are negligible, and this degeneracy persists in the Lyα forest observables to a high precision. Here, we discuss the implications of this degeneracy for choosing parametrisations of the Lyα forest for cosmological analysis.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Cosmology with persistent homology: a Fisher forecast

Abstract Persistent homology naturally addresses the multi-scale topological characteristics of the large-scale structure as a distribution of clusters, loops, and voids. We apply this tool to the dark matter halo catalogs from theQuijotesimulations, and build a summary statistic for comparison with the joint power spectrum and bispectrum statistic regarding their information content on cosmological parameters and primordial non-Gaussianity. Through a Fisher analysis, we find that constraints from persistent homology are tighter for 8 out of the 10 parameters by margins of 13–50%. The complementarity of the two statistics breaks parameter degeneracies, allowing for a further gain in constraining power when combined. We run a series of consistency checks to consolidate our results, and conclude that our findings motivate incorporating persistent homology into inference pipelines for cosmological survey data.

Astronomy & Astrophysics↗
DOE OSTI2021

Graph convolutional networks applied to unstructured flow field data

Abstract Many scientific and engineering processes produce spatially unstructured data. However, most data-driven models require a feature matrix that enforces both a set number and order of features for each sample. They thus cannot be easily constructed for an unstructured dataset. Therefore, a graph based data-driven model to perform inference on fields defined on an unstructured mesh, using a graph convolutional neural network (GCNN) is presented. The ability of the method to predict global properties from spatially irregular measurements with high accuracy is demonstrated by predicting the drag force associated with laminar flow around airfoils from scattered velocity measurements. The network can infer from field samples at different resolutions, and is invariant to the order in which the measurements within each sample are presented. The GCNN method, using inductive convolutional layers and adaptive pooling, is able to predict this quantity with a validation R 2 above 0.98, and a Normalized Mean Squared Error below 0.01, without relying on spatial structure.

Ogoke, Francis (ORCID:0000000224327783)↗
DOE OSTI2022

Theoretical uncertainty quantification for heavy-ion fusion

Despite recent advances and focus on rigorous uncertainty quantification for microscopic models of quantum many-body systems, the uncertainty on the dynamics of those systems has been underexplored. To address this, we have used time-dependent Hartree-Fock to examine the model uncertainty for a collection of low-energy, heavy-ion fusion reactions. Fusion reactions at near-barrier energies represent a rich test-bed for the dynamics of quantum many-body systems owing to the complex interplay of collective excitation, transfer, and static effects that determine the fusion probability of a given system. The model uncertainty is sizable for many of the systems studied and the primary contribution arises from static properties that are ill-constrained, such as the neutron radius of neutron-rich nuclei. Furthermore, these large uncertainties motivate the use of information from reactions to better constrain existing models and to infer static properties from reaction data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Converting dark matter to dark radiation does not solve cosmological tensions

Tensions between cosmological parameters (in particular the local expansion rate H 0 and the amplitude of matter clustering S8) inferred from low-redshift data and data from the cosmic microwave background (CMB) and large-scale structure (LSS) experiments have inspired many extensions to the standard cosmological model, LCDM. Models which simultaneously lessen both tensions are of particular interest. We consider one scenario with the potential for such a resolution, in which some fraction of the dark matter has converted into dark radiation since the release of the CMB. Such a scenario encompasses and generalizes the more standard "decaying dark matter" model, allowing additional flexibility in the rate and time at which the dark matter converts into dark radiation. In this paper, we constrain this scenario with a focus on exploring whether it can solve (or reduce) these tensions. We find that such a model is effectively ruled out by CMB data, in particular by the reduced peak-smearing due to CMB lensing on the power spectrum and the excess integrated Sachs--Wolfe (ISW) signal caused by the additional dark energy density required to preserve flatness after dark matter conversion into dark radiation. Thus, such a model does not have the power to reduce these tensions without further modifications. This conclusion extends and generalizes related conclusions derived for the standard decaying dark matter model.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Impact of dark matter on tidal signatures in neutron star mergers with the Einstein Telescope

If dark matter (DM) accumulates inside neutron stars (NS), it changes their internal structure and causes a shift of the tidal deformability from the value predicted by the dense-matter equation of state (EOS). In principle, this shift could be observable in the gravitational-wave (GW) signal of binary neutron star (BNS) mergers. We investigate the effect of fermionic, noninteracting DM when observing a large number of GW events from DM-admixed BNSs with the precision of the proposed Einstein telescope (ET). Specifically, we study the impact on the recovery of the baryonic EOS and whether DM properties can be constrained. For this purpose, we create event catalogs of BNS mock events with DM fraction up to 1%, from which we reconstruct the posterior uncertainties with the Fisher matrix approach. Using this data, we perform joint Bayesian inference on the baryonic EOS, DM particle mass, and DM particle fraction in each event. Here, our results reveal that when falsely ignoring DM effects, the EOS posterior is biased toward softer EOSs, though the offset is rather small. Further, we find that within our assumptions of our DM model and population, ET will likely not be able to test the presence of DM in BNSs, even when combining many events and adding Cosmic Explorer (CE) to the next-generation detector network. Likewise, the potential constraints on the DM particle mass will remain weak because of degeneracies with the fraction and EOS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Method for Assessment of Security-Relevant Settings in Anomaly-Based Intrusion Detection for Industrial Control Systems

Ensuring the integrity of Ethernet-based networks is a challenging and constantly evolving domain. This problem is exacerbated for those operational technology (OT) networks supporting industrial control systems (ICS) since much of that equipment was originally designed to be on a network that was isolated and generally considered free of malefactors. Increasing pressure to bridge these systems with traditional information technology (IT) networks has introduced a bevy of new threats. In response, both academia and industry have responded with security solutions tailored to ICS environments. Deploying these protection systems often involves several configuration choices. While some of these choices are clear (e.g., block/enable protocol X) others are far more subjective (e.g. alert threshold == 3.43). Further complicating the situation, while often similar to IT networks, OT networks have unique challenges and characteristics that make the task of protecting them simultaneously more difficult and straight forward.Extant solutions for quantifying the relative security of intrusion detection systems fail to effectively support the operators of said systems with understanding the impact of various configuration changes. Further, they assume that the attacks are static and not subject to manipulation or alteration in the face of defenses. In this paper, we present a threat-based method for quantifying the relative impact of various security settings for intrusion detection systems (IDSs) within ICS environments. This method provides operational staff with a clear understanding of the relative impact of their settings and assumes that the attacks levied against them are dynamic. The model is described in detail, we apply the model to a synthetic data set, and discuss the inferences that can be made and what types of decisions they could be used to support.

Gillen, Rob↗
DOE OSTI2021

Novel Gloeobacterales spp. from Diverse Environments across the Globe

Photosynthetic Cyanobacteria and their descendants are the only known organisms capable of oxygenic photosynthesis. Their metabolism permanently changed the Earth’s surface and the evolutionary trajectory of life, but little is known about their evolutionary history. Genomes of the Gloeobacterales, an order of deeply divergent photosynthetic Cyanobacteria, may hold clues about the evolutionary process. However, there are only three published genomes within this order, and it is difficult to make broad inferences based on such little data. Here, I describe five species within the Gloeobacterales retrieved from publicly available databases and examine their photosynthetic gene content and the environments in which Gloeobacterales genomes and 16S rRNA gene sequences are found. The Gloeobacterales contain reduced photosystems and inhabit cold, wet-rock, and low-light environments. They are likely present in low abundances due to their low growth rate. Future searches for Gloeobacterales should target these environments, and samples should be deeply sequenced to capture the low-abundance taxa. Publicly available databases contain undescribed taxa within the Gloeobacterales. However, searching through all available data with current methods is computationally expensive. Therefore, new methods must be developed to search for these and other evolutionarily important taxa. Once identified, these novel photosynthetic Cyanobacteria will help illuminate the origin and evolution of oxygenic photosynthesis. Early branching photosynthetic Cyanobacteria such as the Gloeobacterales may provide clues into the evolutionary history of oxygenic photosynthesis, but there are few genomes or cultured taxa from this order. Five new metagenome-assembled genomes suggest that members of the Gloeobacterales all contain reduced photosystems and lack genes associated with thylakoids and circadian rhythms. Their distribution suggests that they may thrive in environments that are marginal for other species, including wet-rock and cold environments. These traits may aid in the discovery and cultivation of novel species in this clade.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Fast and Scalable FFT-Based GPU-Accelerated Algorithms for Block-Triangular Toeplitz Matrices with Application to Linear Inverse Problems Governed by Autonomous Dynamical Systems

In this work, we present an efficient and scalable algorithm for performing matrix-vector multiplications (matvecs) for block Toeplitz matrices. Such matrices, which are shift-invariant with respect to their blocks, arise in the context of solving inverse problems governed by autonomous systems, and time-invariant systems in particular. In this article, we consider inverse problems that infer unknown parameters from observational data of a linear time-invariant dynamical system given in the form of partial differential equations (PDEs). Matrix-free Newton-conjugate-gradient methods are often the gold standard for solving these inverse problems, but they require numerous actions of the Hessian on a vector. Matrix-free adjoint-based Hessian matvecs require solution of a pair of linearized forward/adjoint PDE solves per Hessian action, which may be prohibitive for large-scale inverse problems. Time invariance of the forward PDE problem leads to a block Toeplitz structure of the discretized parameter-to-observable (p2o) map defining the mapping from inputs (parameters) to outputs (observables) of the PDEs. This block Toeplitz structure enables us to exploit two key properties: (1) compact storage of the p2o map and its adjoint, and (2) efficient fast Fourier transform–based Hessian matvecs. The proposed algorithm is mapped onto large multi-GPU clusters and achieves more than 80% of peak bandwidth on NVIDIA A100 GPUs. Excellent weak scaling is shown for up to 48 A100 GPUs. For the targeted problems, the implementation executes Hessian matvecs within fractions of a second, which is orders of magnitude faster than can be achieved by conventional matrix-free Hessian matvecs via forward/adjoint PDE solves.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

A theoretical study on quasifission and fusion–fission processes in heavy-ion collisions

Despite recent advances and focus on rigorous uncertainty quantification for microscopic models of quantum many-body systems, the uncertainty on the dynamics of those systems has been underexplored. To address this, we have used time-dependent Hartree-Fock to examine the model uncertainty for a collection of low-energy, heavy-ion fusion reactions. Fusion reactions at near-barrier energies represent a rich test-bed for the dynamics of quantum many-body systems owing to the complex interplay of collective excitation, transfer, and static effects that determine the fusion probability of a given system. The model uncertainty is sizable for many of the systems studied and the primary contribution arises from static properties that are ill-constrained, such as the neutron radius of neutron-rich nuclei. These large uncertainties motivate the use of information from reactions to better constrain existing models and to infer static properties from reaction data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Investigating effects of soil chemicals on density of small mammal bioindicators using spatial capture-recapture models

Monitoring the ecological impacts of environmental pollution and the effectiveness of remediation efforts requires identifying relationships between contaminants and the disruption of biological processes in populations, communities, or ecosystems. Wildlife are useful bioindicators, but traditional comparative experimental approaches rely on a staunch and typically unverifiable assumption that, in the absence of contaminants, reference and contaminated sites would support the same densities of bioindicators, thereby inferring direct causation from indirect data. We demonstrate the utility of spatial capture-recapture (SCR) models for overcoming these issues, testing if community density of common small mammal bioindicators was directly influenced by soil chemical concentrations. By modeling density as an inhomogeneous Poisson point process, we found evidence for an inverse spatial relationship between Peromyscus density and soil mercury concentrations, but not other chemicals, such as polychlorinated biphenyls, at a site formerly occupied by a nuclear reactor. Although the coefficient point estimate supported Peromyscus density being lower where mercury concentrations were higher (β = –0.44), the 95% confidence interval overlapped zero, suggesting no effect was also compatible with our data. Estimated density from the most parsimonious model (2.88 mice/ha; 95% CI = 1.63–5.08), which did not support a density-chemical relationship, was within the range of reported densities for Peromyscus that did not inhabit contaminated sites elsewhere. Environmental pollution remains a global threat to biodiversity and ecosystem and human health, and our study provides an illustrative example of the utility of SCR models for investigating the effects that chemicals may have on wildlife bioindicator populations and communities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Array-Based Seismic Measurements of OSIRIS-REx’s Re-Entry

The return home of the OSIRIS-REx spacecraft in September 2023 marked only the fifth time that an artificial object entered the Earth’s atmosphere at interplanetary velocities. Although rare, such events serve as valuable analogs for natural meteoroid re-entries; enabling study of hypersonic dynamics, shock wave generation, and acoustic-to-seismic coupling. Here, in this study, we report on the signatures recorded by a dense (100 m scale) 11-station array located almost directly underneath the capsule’s point of peak atmospheric heating in northern Nevada. Seismic data are presented, which allow inferences to be made about the shape of the shock wave’s footprint on the surface, the capsule’s trajectory, and its flight parameters.

58 GEOSCIENCES↗
DOE OSTI2021

Improving Subsurface Stress Characterization for Carbon Dioxide Storage Projects

Researchers at New Mexico Tech, Los Alamos National Laboratory (LANL), Sandia National Laboratory (SNL), and other collaborators are developing a methodology to improve characterization of stress in the subsurface by means of a model-based inversion of reservoir engineering data, time lapse seismic measurements, and microseismicity. Historically, various geophysical techniques have been used in efforts to understand the state of stress in the subsurface through direct and indirect imaging of stress sensitive features (faults and fractures) and observations of transient stress related observations (time variant elastic moduli and microseismicity). Standard direct and indirect techniques for seismic fault and fracture imaging suffer from detectability limits due to reliance on high data quality and multiplicity. Variations in effective elastic properties from inversion of high quality seismic (Vertical Seismic Profile (VSP)) data may be used to infer stress near the wellbore through integration with independent experimental characterization of the stress-velocity relationship. Given a sufficiently robust observation network, microseismic emissions may be inverted to characterize focal mechanisms which, together with supporting assumptions and constraints, inform estimates of in-situ stress. While each of these techniques contributes in part to the characterization of stress within limited spatial and temporal domains, no one method provides an unambiguous stress measurement or a predictive capability over a site scale spatial extent. Challenges associated with solution non-uniqueness, measurement ambiguity, and irregular sampling may be greatly minimized through combination of one or more of independent measurements within a common framework in which realistic geological, hydrodynamic, geomechanical, and seismological constituent process models may act as constraints.

02 PETROLEUM↗
DOE OSTI2020

Weighted greedy-optimal design of computer experiments for kernel-based and Gaussian process model emulation and calibration

This article is concerned with the approximation of high-dimensional functions by kernel-based methods. Motivated by uncertainty quantification, which often necessitates the construction of approximations that are accurate with respect to a probability density function of random variables, we aim at minimizing the approximation error with respect to a weighted $L^p$-norm. We present a greedy procedure for designing computer experiments based upon a weighted modification of the pivoted Cholesky factorization. The method successively generates nested samples with the goal of minimizing error in regions of high probability. Numerical experiments validate that this new importance sampling strategy is superior to other sampling approaches, especially when used with non-product probability density functions. We also show how to use the proposed algorithm to efficiently generate surrogates for inferring unknown model parameters from data.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Absorber Column CFD model validation against PNNL’s device-scale absorber column on the LCFS unit

Absorber column has been widely used for CO 2 capture in the coal-fired power plants. High-fidelity CFD models play an important role in absorber column design and solvents optimization, which help enhance the CO 2 capture efficiency and reduce the operation cost. This report provides a comprehensive description of the development of CFD absorber models at two different levels, the design and implementation of PNNL’s device-scale absorber column experiment, and the methodology to combine the CFD results, experiment data, and Aspen model for a better understanding of the interface area in packed column. A composite model is firstly proposed in the Discrete Element Method (DEM) packing process, which can model the complex geometry of various packing elements. This generates a realistic packing pattern and accurate packing porosity ε and specific area a p compared to the actual values for absorber column used in LCFS. Two level of CFD absorber models were developed, namely the full-size column model (FCM) to simulate the entire packed column with a focus on the wall/entrance effects, and the representative column model (RCM) to simulate a section of column with a focus on the sensitivity study of interface area. A Design of Experiment (DoE) plan was developed to guide the collection of 100 run CFD data and 12 experiment runs. The 100 CFD runs were carried out in the RCM with Pro-Pak packing and cover a wide operation range and solvent properties. Impact of influential factors on the interface area in packed column were investigated in details. The CFD interface area was then combined with the experimental data and Aspen model to infer some information of the effective contact angle in the column. The accuracy and uncertainties in the interface area and contact angle can be quantified.

01 COAL, LIGNITE, AND PEAT↗