Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “chip”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Harvesting Losses for a Cut-and-Chip Harvesting System Operating in Willow Short-Rotation Coppice

In any short-rotation coppice (SRC) operation, a certain percentage of harvestable material is unrecovered, which contributes to harvesting system losses. This material may be in the form of merchantable and non-merchantable components. These losses affect economics but also influence yield, nutrient cycling, and carbon sequestration. There are very few estimates for harvesting losses available in the literature, and they are limited by small sample sizes. The objective of this work was to provide a broad overview of harvesting losses in willow SRC over a wide range of standing biomass and harvesting conditions. The average total harvesting losses were between 3 and 4 Mg ha−1, which is between 6 and 7 percent of the standing biomass. Losses can spike to nearly 40% on less than 3% of the area. Harvesting losses are significantly, but weakly, correlated with increased standing biomass. These results highlight the complexity and variability in harvesting losses as well as which aspects of harvesting systems might be targeted to reduce or partition material losses. These results have implications for designing machinery and economic modeling of these systems.

Eisenbies, Mark H.↗

Cleaner Chips: Decarbonization in Semiconductor Manufacturing

The growth of the information and communication technology sector has vastly accelerated in recent decades because of advancements in digitalization and Artificial Intelligence (AI). Scope 1, 2, and 3 greenhouse gas emissions data of the top six semiconductor manufacturing companies (Samsung Electronics, Taiwan Semiconductor Manufacturing Corporation, Micron, SK Hynix, Kioxia, and Intel) were gathered from the publicly accessible Carbon Disclosure Project’s (CDP) website for 2020. Scope 3 emissions had the largest share in total annual emissions with an average share of 52%, followed by Scope 2 (32%) and Scope 1 (16%). Because of the absence of a standardized methodology for Scope 3 emissions estimation, each company used different methodologies that resulted in differences in emissions values. An analysis of the CDP reporting data did not reveal information on strategies implemented by companies to reduce Scope 3 emissions. The use of renewable energy certificates had the largest effect on decarbonization centered on reducing Scope 2 emissions, followed by the deployment of perfluorocarbon reduction technologies to help reduce Scope 1 fugitive emissions. Technology-specific marginal abatement costs of CO2 were also estimated and varied between −416 and 12,215 USD/t CO2 eq., which primarily varied depending on the technology deployed.

42 ENGINEERING↗

A High Gain Lens-Coupled On-Chip Antenna Module for Miniature-Sized Millimeter-Wave Wireless Transceivers

This paper presents high gain and compact Transmit/Receive (TX/RX) integrated antennas in a standard BiCMOS 130nm technology for millimeter-scale millimeter-wave (mm-wave) applications, including high data rate radios and high resolution radars. The proposed TX/RX antenna module utilizes an integrated dipole antenna for the receiver and a slot antenna for the transmitter, placed orthogonally. The achieved gain and radiation efficiency are 5.7dBi and 41.3% for the slot antenna, respectively, and 6dBi and 39% for the dipole antenna. The link budget is improved by 16dB by optimization on the geometry aswell as application of a high resistivity hemispheric silicon dielectric lens.

Engineering↗

Computer circuit will fit on single silicon chip

A simplified computer logic circuit of two NAND/NOR gates and three additional inputs to accomplish the count and shift function is described. The circuit has capacity for parallel read-in, counting, serial shiftout, complement input and set and reset.

Smith, C.↗

Magnetic and Moessbauer studies of Apollo 16 rock chips 60315,51 and 62295,27

Analysis of the Moessbauer spectra of two Apollo 16 rocks showed that 60315,51 is much richer in iron metal and troilite, but poorer in olivine, than 62295,27. The values of magnetic parameters, derived from hysteresis loops at 175 and 300 K, indicate the high metal contents and the predominance of coarse multidomain grains in both rocks. These coexist with a superparamagnetic grain fraction in 60315 and with a small single-domain grain fraction in 62295. The high Fe(0)/Fe(2+) ratios, the nonlinear acquisition of laboratory thermoremanence, and the drastic changes in magnetic parameters upon heating support the proposed formation of both rocks from the lunar regolith, with incorporation of shocked meteoritic metal grains during high-temperature impact events and simultaneous acquisition of magnetic remanence. Values estimated for ancient lunar magnetic fields by comparing the natural remanence with laboratory thermoremanence acquired in fields of 0.05 and 0.5 Oe, range from 0.01 to more than 1 Oe.

Brecher, A.↗

Investigation of discrete component chip mounting technology for hybrid microelectronic circuits

The use of polymer adhesives for high reliability microcircuit applications is a radical deviation from past practices in electronic packaging. Bonding studies were performed using two gold-filled conductive adhesives, 10/90 tin/lead solder and Indalloy no. 7 solder. Various types of discrete components were mounted on ceramic substrates using both thick-film and thin-film metallization. Electrical and mechanical testing were performed on the samples before and after environmental exposure to MIL-STD-883 screening tests.

Caruso, S. V.↗

Ultrasonic scanning of multilayer ceramic chip capacitors

Ultrasonic scanning is compared to neutron radiography and scanning laser acoustic microscopy (SLAM). Data show that SLAM and ultrasonic scanning evaluations are in good agreement. There is poor agreement between N-ray and both ultrasonic techniques because N-ray is insensitive to all but the grossest delaminations. Statistical analysis show a good correlation between ultrasonic scanning and destructive physical analysis.

Bradley, F. N.↗

Low-Contamination Vibrating Feeder for Silicon Chips

Vibratory feeding is method of controlling flow of small oddly shaped particles. Technique applied to other materials that require contamination control by feeding material through vibrating troughs topped by particular material.

Mackintosh, B. H.↗

Single-Chip VLSI Reed-Solomon Encoder

Reed-Solomon (RS) encoder based on Berlekamp bit-serial multiplier algorithm. RS code standard, based on code words of 255 8-bit symbols, of which 223 symbols convey information and remaining 32 are check symbols. This code enables correction of up to 16 erroneous information symbols per word. Berlekamp algorithm based on code-generating polynomial with 32 roots that occur in reciprocal pairs. Choice of algorithm permits compact design.

Truong, T. K.↗

Detection of Machining Chips by Pressure Reversal

Inaccessible interior spaces inspected acoustically. In acoustic inspection, inlet and outlet ports of component connected to pneumatic hoses of apparatus that rapidly reverses induced pressure differential. If loose particles inside this component, they will generate noise detected by series of contact microphones attached to component. Noise indicates general location of contaminants, and its characteristic helps in identifying particles from their acoustic signatures.

Wyett, L. M.↗