SEARCH · Engineering Papers

Results for “casting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

All sources NASA NTRS DOE OSTI

NASA NTRS1978

The production of ultrathin polyimide films for the solar sail program and Large Space Structures Technology (LSST): A feasibility study

Polyimide membranes of a thickness range from under 0.01 micron m to greater than 1 micron m can be produced at an estimated cost of 50 cents per sq m (plus the cost of the polymer). The polymer of interest is dissolved in a solvent which is solube in water. The polymer or casting solution is allowed to flow down an inclined ramp onto a water surface where a pool of floating polymer develops. The solvent dissolves into the water lowering the surface tension of the water on equently, the contact angle of the polymer pool is very low and the edge of the pool is very thin. The solvent dissolves from this thin region too rapidly to be replenished from the bulk of the pool and a solid polymer film forms. Firm formation is rapid and spontaneous and the film spreads out unaided, many feet from the leading edge of the pool. The driving force for this process is the exothermic solution of the organic solvent from the polymer solution into the water.

Forester, R. H.↗

NASA NTRS1978

Biochemical adaptations of antigravity muscle fibers to disuse atrophy

Studies are presented in four parts of this report. The four parts include; (1) studies to gain information on the molecular basis of atrophy by antigravity muscle; (2) studies on the work capacity of antigravity muscles during atrophy and during recovery from atrophy; (3) studies on recovery of degenerated antigravity fibers after removal of hind-limb casts; and (4) studies on the atrophy and recovery of bone. The philosophy of these studies was to identify the time sequence of events in the soleus muscle of the rat following immobilization of the hind limbs, so that the length of the soleus muscle within the fixed limb is less than its resting length. In two separate studies, no decline in the weight of the soleus muscle could be detected during the first 72 hours of limb immobilization.

Booth, F. W.↗

NASA NTRS1978

Longitudinal shear behavior of several oxide dispersion strengthened alloys

Two commercial oxide dispersion strengthened (ODS) alloys, MA-753 and MA-754, and three experimental ODS alloys, MA-757E, MA-755E, and MA-6000E, were tested in shear at 760 C. Comparisons were made with other turbine blade and vane alloys. All of the ODS alloys exhibited less shear strength than directionally solidified Mar-M 200 = Hf or then conventionally cast B-1900. The strongest ODS alloy tested, MA-755E, was comparable in both shear and tensile strength to the lamellar directionally solidified eutectic alloy gamma/gamma prime - delta. Substantial improvements in shear resistance were found for all alloys tested when the geometry of the specimen was changed from one generating a transverse tensile stress in the shear area to one generating a transverse compressive stress. Finally, 760 C shear strength as a fraction of tensile strength was found to increase linearly with the log of the transverse tensile ductility.

Glasgow, T. K.↗

NASA NTRS1976

Some observations on the characteristics of low-cost silicon sheets

To meet the need for low cost silicon sheet material in the ERDA/JPL photovoltaics program, JPL has initiated a wide ranging technology development effort in crystal growth that includes several different technology thrusts. They range in scope from innovative ingot growth and multislice wafering, to shaped growth techniques, substrate-related processes and hot forming techniques. In this paper, some salient observations on materials resulting from these processes are reported. Included are multiblade wafering-induced damage studies, interface morphology studies on the heat exchanger cast silicon, some diffusion length measurements in thin silicon layers on ceramic substrates, and results on the equilibrium structure found in laser zone ribbon growth.

Digges, T. G., Jr.↗

NASA NTRS1978

A search for nitric oxide gamma band emission in an aurora

A strong emission feature at 2150 A has been observed by a rocket-borne spectrophotometer in an IBC II(+) aurora. This feature, commonly identified with the NO gamma (1,0) band, is comparable in intensity to the nearby N2 Vegard-Kaplan bands. Comparison of the observed spectra with a theoretically produced synthetic spectrum allows all but this feature to be assigned to N2 transitions. No bands of the v prime = 0 or 2 progressions or any other bands from v prime = 1 appear, casting serious doubt on the identification of this feature as the NO gamma (1,0) band.

Beiting, E. J., III↗

NASA NTRS1978

Analysis of a possible sun-weather correlation

In an attempt to verify the relationship between solar activity and precipitation posited by Xanthakis (1973), annual precipitation records from 2,548 stations in both hemispheres from the period 1850 to 1973 were examined. The strong negative correlation between solar activity and rainfall in the 60 to 70 deg N latitude belt found by Xanthakis appeared much less distinct in the present study. In addition, a spectral analysis indicated no significant spectral peaks having periods between 6 and 20 years, a finding which cast further doubt on the solar cycle-precipitation correlation.

Gerety, E. J.↗

NASA NTRS1978

The effect of microstructure on hydrogen embrittlement of the nickel base superalloy, Udimet 700

Material from a single heat of cast and wrought Udimet 700 was processed and/or heat treated to produce five material conditions with identical chemical compositions but with distinct microstructural variations, and then evaluated for susceptibility to hydrogen embrittlement. Two prealloyed powder conditions exhibited significantly improved resistance to hydrogen embrittlement, as compared to wrought material. No degradation in notch or smooth tensile strengths occurred, and average ductilities of 25 percent reduction of area were determined for 2 hydrogen evaluation procedures. For the most severe hydrogenation procedure, ductility levels were reduced to 15 percent. These improvements were attributed to cleaner grain boundaries and decreased grain size.

Gray, H. R.↗

NASA NTRS1978

Influence of high pressure hydrogen on cyclic load crack growth in metals

The effect of high pressure hydrogen on the crack growth rate of various nickel-base alloys was studied at ambient temperature. Considerable enhancement of the cyclic flaw growth rate was observed for Inconel 718, wrought and cast, and Waspaloy, a nickel-base alloy similar to Inconel 718. Only slight enhancement of the flaw growth rate for Alloy 903 was observed.

Jewett, R. P.↗

NASA NTRS1978

Infrared colors and the diffuse interstellar bands

Broad-band infrared photometric measurements have been gathered for 105 stars which exhibit diffuse interstellar bands in their spectra. All normal stars obey a single reddening law, and a value of R equal to 3.08 + or - 0.15 is derived. This value is consistent with other recent determinations of R. The diffuse band indicators, the central depth of the 4430-A feature and the equivalent widths of the 5780-A and 6284-A features, show as large a scatter with the infrared color excesses as they do with E(B - V). No single-valued relation between the color excesses and the diffuse band strengths appears to exist. This casts doubt on whether dust grains which produce the visual and infrared extinctions are the carriers for the diffuse interstellar features.

Sneden, C.↗

NASA NTRS1978

X-ray fluorescence analysis for prediction of Space Shuttle solid rocket motor performance

Analysis of uncured solid propellant by X-ray fluorescence has been conducted on mixes prepared for four development motors produced for the Space Shuttle SRM Project. X-ray readings for chlorine (ammonium perchlorate) and iron (ferric oxide) were recorded for each mix during processing of the propellant. These values were used to predict burning rates for uncured acceptance, uncured acoustic emission and cured acoustic emission strands. Predicted burning rates all fell within control limits and when compared to actual burning rates, most were within experimental error. The X-ray analysis required one-third the time of current methods and met casting schedules.

Pulsipher, H. G.↗

NASA NTRS1979

A reactor for more efficient solar cells

Reactor produces highly pure silicon at relatively high temperature of 2,000 K. Process separates liquid silicon product from gaseous coproducts more easily than conventional lower-temperature processes. High production rates may be obtained in relatively small reaction chambers which could include means for collecting or casting silicon ingots.

Fey, M. G.↗

NASA NTRS1980

Improved piston rings for a stirling engine

Cast-iron piston rings coated with commercially-available antifriction materials improves cylinder life of high-performance Stirling engine. Ring is efficient heat conductor between piston and cylinder. Device has low thermal expansion which maintains minimum gap in ring, good radial force characteristics, and essentially indefinite life.

Mcdougal, A. R.↗

NASA NTRS1978

Exploratory Thermal-mechanical Fatigue Results for Rene' 80 in Ultrahigh Vacuum

A limited study was conducted of the use of strainage partitioning for predicting the thermalmechanical fatigue life of cast nickel-base superalloy Rene' 80. The fatigue lives obtained by combined inphase thermal and mechanical strain cycling between 400 C (752 F) and 1000 C (1802 F) in an ultrahigh vacuum were considerably shorter than those represented by the four basic partitioned inelastic strainrange fatigue life relationships established previously for this alloy at 871 C (1600 F) and 1000 C (1832 F) in an ultrahigh vacuum. This behavior was attributed to the drastic decrease in ductility with decreasing temperature for this alloy. These results indicated that the prediction of the thermal-mechanical fatigue life of Rene' 80 by the method of strainrange partioning may be improved if based on the four basic fatigue life relationships determined at a lower temperature in the thermal-mechanical strain cycle.

Sheinker, A. A.↗

NASA NTRS1978

Conceptual design of thermal energy storage systems for near term electric utility applications. Volume 1: Screening of concepts

Over forty thermal energy storage (TES) concepts gathered from the literature and personal contacts were studied for their suitability for the electric utility application of storing energy off-peak discharge during peak hours. Twelve selections were derived from the concepts for screening; they used as storage media high temperature water (HTW), hot oil, molten salts, and packed beds of solids such as rock. HTW required pressure containment by prestressed cast-iron or concrete vessels, or lined underground cavities. Both steam generation from storage and feedwater heating from storage were studied. Four choices were made for further study during the project. Economic comparison by electric utility standard cost practices, and near-term availability (low technical risk) were principal criteria but suitability for utility use, conservation potential, and environmental hazards were considered.

Hausz, W.↗

NASA NTRS1978

Analysis and Experimental Tests of a High-Performance Evacuated Tubular Collector

A high-performance collector based on the use of all-glass, evacuated tubular collector elements is described and analyzed, and supporting experimental data presented. The collector operated with excellent efficiency at temperatures high enough to drive existing air conditioning units, and showed good performance under diffuse light and low insolation conditions. Collector efficiency was insensitive to operating temperature, ambient temperature, and wind speed. In addition, air, as well as liquid, can be used as the heat transfer fluid, with no significant performance penalty. While the equations governing the useful energy produced can be cast in a form similar to that for flat plate collectors, several important parameters were unique in a number of respects. The loss coefficient was unusually low, while the flow factor and effective insolation were unusually high.

Beekley, D. C.↗

NASA NTRS1978

Evaluation of ceramics for stator application: Gas turbine engine report

Current ceramic materials, component fabrication processes, and reliability prediction capability for ceramic stators in an automotive gas turbine engine environment are assessed. Simulated engine duty cycle testing of stators conducted at temperatures up to 1093 C is discussed. Materials evaluated are SiC and Si3N4 fabricated from two near-net-shape processes: slip casting and injection molding. Stators for durability cycle evaluation and test specimens for material property characterization, and reliability prediction model prepared to predict stator performance in the simulated engine environment are considered. The status and description of the work performed for the reliability prediction modeling, stator fabrication, material property characterization, and ceramic stator evaluation efforts are reported.

Trela, W.↗

NASA NTRS1979

Development and Evaluation of Elastomeric Materials for Geothermal Applications

A material was formulated having about 250-350 psi tensile strength and 30-80 percent elongation at 260 C for at least 24 hours in simulated brine. The relationship between these laboratory test results and sealing performance in actual or simulated test conditions is not entirely clear; however, it is believed that no conventional formation or casing packer design is likely to perform well using these materials. The synthetic effort focused on high temperature block copolymers and development of curable polystyrene. Procedures were worked out for synthesizing these new materials. Initial results with heat-cured unfilled polystyrene 'gum' at 260 C indicate a tensile strength of about 50 psi. Cast films of the first sample of polyphenyl quinoxaline-polystyrene block copolymer, which has 'graft-block' structure consisting of a polystyrene chain with pendant polyphenyl quinoxaline groups, show elastomeric behavior in the required temperature range. Its tensile strength and elongation at 260 C were 220-350 psi and 18-36 percent, respectively. All of these materials also showed satisfactory hydrolytic stability.

Mueller, W. A.↗

NASA NTRS1979

LaRC fabrication development

The results of in-house efforts in support of the Supersonic Cruise Research (SCR) Program to develop fabrication procedures for the manufacture of GR/PI wing panels for the NASA YF-12 airplane are reported. In addition, manufacturing procedures are outlined for the fabrication of structures in support of the CASTS Project. The results of studies directed toward the development of GR/PI prepreg manufacturing capability, assembly of structural elements from prepreg, final processing of GR/PI structural shapes, and techniques for verification of structural integrity are presented.

Baucom, R. M.↗