Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “advanced process control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Future Automotive Aftertreatment Solutions: The 150°C Challenge Workshop Report

With future fuel economy standards enacted, the U.S. automotive manufacturers (OEMs) are committed to pursuing a variety of high risk/highly efficient stoichiometric and lean combustion strategies to achieve superior performance. In recognition of this need, the U.S. Department of Energy (DOE) has partnered with domestic automotive manufacturers through U.S. DRIVE to develop these advanced technologies. However, before these advancements can be introduced into the U.S. market, they must also be able to meet increasingly stringent emissions requirements. A significant roadblock to this implementation is the inability of current catalyst and aftertreatment technologies to provide the required activity at the much lower exhaust temperatures that will accompany highly efficient combustion processes and powertrain strategies. Therefore, the goal of this workshop and report is to create a U.S. DRIVE emission control roadmap that will identify new materials and aftertreatment approaches that offer the potential for 90% conversion of emissions at low temperature (150°C) and are consistent with highly efficient combustion technologies currently under investigation within U.S. DRIVE Advanced Combustion and Emission Control (ACEC) programs.

Zammit, Michael↗

Osmotic control of the spacing of parallel shear cracks in shale growing subcritically in geologic past

The geological genesis of natural cracks in sedimentary rocks such as shale is a problem that needs to be understood to improve the technology of hydraulic fracturing as well as deep sequestration of harmful fluids. Why are the vertical natural cracks roughly parallel and equidistant, and why is the spacing roughly 10 cm rather than 1 cm or 100 cm? Fracture mechanics of critical cracks cannot answer this question. Neither can the material heterogeneity. The growth of critical parallel cracks is impossible because the relative crack face displacements would immediately localize into one crack, leading to an earthquake. The cracks must have formed, on the tectonic time scale, by a slow growth of subcritical shear cracks governed by the Charles-Evans law. The idea advanced here is that what controls the crack spacing is the balance between the reduction, due to shear dilatancy, of the concentration of ions such as Na + and Cl - in each fracture process zone (PFZ), which decelerates the cracks, and the restoration of ion concentration by diffusion of ions from the space between the cracks into the FPZ. This diffusion of water is driven mainly by the osmotic pressure gradient, which offsets the deceleration and depends strongly on the crack spacing. A simple analytical solution of the steady state is rendered possible by approximating the ion concentration profiles between adjacent cracks by parabolic arcs. Applying this theory to Woodford shale yields the approximate crack spacing of 10 cm, which is realistic. Furthermore, the stability of unlimited parallel mode II frictional crack growth is proven by examining the second variation of the free energy. Water concentration drop in the FPZ due to shear dilatancy and its restoration by water diffusion from the inter-crack space have similar effect, although probably much weaker.

42 ENGINEERING↗

Minimax approach problem with incomplete information for the two-level hierarchical discrete-time dynamical system

We consider a discrete-time dynamical system consisting of three controllable objects. The motions of all objects are given by the corresponding vector linear or convex discrete-time recurrent vector relations, and control system for its has two levels: basic (first or I level) that is dominating and subordinate level (second or II level) and both have different criterions of functioning and united a priori by determined informational and control connections defined in advance. For the dynamical system in question, we propose a mathematical formalization in the form of solving a multistep problem of two-level hierarchical minimax program control over the terminal approach process with incomplete information and give a general scheme for its solution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Minimax terminal approach problem in two-level hierarchical nonlinear discrete-time dynamical system

We consider a discrete–time dynamical system consisting of three controllable objects. The motions of all objects are given by the corresponding vector nonlinear or linear discrete–time recurrent vector relations, and control system for its has two levels: basic (first or I level) that is dominating and subordinate level (second or II level) and both have different criterions of functioning and united a priori by determined informational and control connections defined in advance. For the dynamical system in question, we propose a mathematical formalization in the form of solving a multistep problem of two-level hierarchical minimax program control over the terminal approach process with incomplete information and give a general scheme for its solving.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computer-automated tuning procedures for semiconductor quantum dot arrays

As with any quantum computing platform, semiconductor quantum dot devices require sophisticated hardware and controls for operation. The increasing complexity of quantum dot devices necessitates the advancement of automated control software and image recognition techniques for rapidly evaluating charge stability diagrams. We use an image analysis toolbox developed in Python to automate the calibration of virtual gates, a process that previously involved a large amount of user intervention. Moreover, we show that straightforward feedback protocols can be used to simultaneously tune multiple tunnel couplings in a triple quantum dot in a computer automated fashion. Finally, we adopt the use of a “tunnel coupling lever arm” to model the interdot barrier gate response and discuss how it can be used to more rapidly tune interdot tunnel couplings to the gigahertz values that are compatible with exchange gates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Earth's water reservoirs in a changing climate

Progress towards achieving a quantitative understanding of the exchanges of water between Earth's main water reservoirs is reviewed with emphasis on advances accrued from the latest advances in Earth Observation from space. These exchanges of water between the reservoirs are a result of processes that are at the core of important physical Earth-system feedbacks, which fundamentally control the response of Earth's climate to the greenhouse gas forcing it is now experiencing, and are therefore vital to understanding the future evolution of Earth's climate. The changing nature of global mean sea level (GMSL) is the context for discussion of these exchanges. Different sources of satellite observations that are used to quantify ice mass loss and water storage over continents, how water can be tracked to its source using water isotope information and how the waters in different reservoirs influence the fluxes of water between reservoirs are described. The profound influence of Earth's hydrological cycle, including human influences on it, on the rate of GMSL rise is emphasized. The many intricate ways water cycle processes influence water exchanges between reservoirs and thus sea-level rise, including disproportionate influences by the tiniest water reservoirs, are emphasized.

54 ENVIRONMENTAL SCIENCES↗

New Photolithography Stepping Machine Close Out Report CRADA No. TSB-842-94

The semiconductor industry, due to performance driven competition, continues to achieve unprecedented technological advancements. For example, the memory density of DRAM chips increases four fold every three years or so. Advances in integrated circuit technology drive the producers of processing equipment to achieve commensurate advances, or conversely, advances in manufacturing technology allow advances in integrated circuits. A vital U.S. technology addressed by this project is step-and-repeat photolithography. It demands motion control to tens of nanometers, nearly perfect optical systems and competitive throughput of product. The failure to keep this domestic technology competitive and profitable places the whole U.S. semiconductor industry at risk to foreign interests.

47 OTHER INSTRUMENTATION↗

Characterization of Build Parameters and Microstructure in Low Heat Input WAAM of Ni-Based Superalloy Haynes 282

Ni-based superalloy Haynes® 282® is being targeted for various applications in advanced power generation systems for its superior fabricability, weldability, and excellent high temperature creep and corrosion performance. This process optimization study aims to use a low heat-input, high deposition rate, controlled Gas Metal Arc Welding (GMAW) process, Cold Metal Transfer (CMT) by Fronius, attempting to achieve fully dense fabrication and possibly avoid the need for HIP. Twenty-one multilayer blocks (~25x100x40 mm3) were deposited to explore a large set of build parameters variations that focused on varying the travel speed from 14 to 42 inches per minute (ipm) and wire feed speed from 150 to 450 ipm. A strong correlation has been observed between arc energy – controlled primarily by travel and wire feed speed. Initial visual inspection, internal microstructural examination, and computed tomography (CT) have been used to determine the effects of built parameters on evolution of internal porosity and defects. Scanning electron microscopy techniques enabled structural and compositional imaging of heterogeneity and changes in microstructural properties.

additive manufacturing↗

Characterization of Build Parameters and Microstructure in Low Heat Input WAAM of Ni-Based Superalloy Haynes 282

Ni-based superalloy Haynes® 282® is being targeted for various applications in advanced power generation systems for its superior fabricability, weldability, and excellent high temperature creep and corrosion performance. This process optimization study aims to use a low heat-input, high deposition rate, controlled Gas Metal Arc Welding (GMAW) process, Cold Metal Transfer (CMT) by Fronius, attempting to achieve fully dense fabrication and possibly avoid the need for HIP. Twenty-one multilayer blocks (~25x100x40 mm3) were deposited to explore a large set of build parameters variations that focused on varying the travel speed from 14 to 42 inches per minute (ipm) and wire feed speed from 150 to 450 ipm. A strong correlation has been observed between arc energy – controlled primarily by travel and wire feed speed. Initial visual inspection, internal microstructural examination, and computed tomography (CT) have been used to determine the effects of built parameters on evolution of internal porosity and defects. Scanning electron microscopy techniques enabled structural and compositional imaging of heterogeneity and changes in microstructural properties.

additive manufacturing↗

Benchmarking soil moisture and its relationship to ecohydrologic variables in Earth System Models

Soil moisture (SM) is a key regulator of ecosystem biogeophysics, influencing plant water relations and land-atmosphere energy exchanges. We evaluate the representation of SM in 16 Earth System Models from the Coupled Model Intercomparison Project Phase 6 (CMIP6) using the International Land Model Benchmarking (ILAMB) framework, focusing on surface (0–5, 0–10 cm) and rootzone (0–100 cm) depths, as well as key ecohydrological variables like gross primary productivity (GPP), leaf area index (LAI), and evapotranspiration (ET), and their coupling. Models are benchmarked against multiple observational and assimilated datasets to assess both state variables and cross-variable relationships. Surface SM is generally well represented (r > 0.87), while rootzone SM variability is systematically overestimated (normalized standard deviation > 1). ET shows strong agreement with observations (r > 0.9), whereas GPP and LAI exhibit larger inter-model spread. Skill in individual variables does not guarantee realistic SM–ecohydrology coupling, which varies strongly across models and depends on the reference dataset. Köppen-based regional analyses reveal strong regime dependence, with several models performing well in Tropical and Temperate regions but degrading in Continental (high-latitude) zones. Across both global and regional benchmarks, models cluster by land surface framework, indicating that structural choices in soil hydrology and soil–plant coupling exert a first-order control on performance. These results provide process-relevant benchmarks and suggest that improving the representation of vertical soil structure, rooting depth distributions, and soil–plant hydraulic coupling will be central to advancing soil moisture realism in next-generation Earth system models.

CMIP6↗

Using field observations to inform thermal hydrology models of permafrost dynamics with ATS (v0.83)

Climate change is profoundly transforming the carbon-rich Arctic tundra landscape, potentially moving it from a carbon sink to a carbon source by increasing the thickness of soil that thaws on a seasonal basis. Thus, the modeling capability and precise parameterizations of the physical characteristics needed to estimate projected active layer thickness (ALT) are limited in Earth system models (ESMs). In particular, discrepancies in spatial scale between field measurements and Earth system models challenge validation and parameterization of hydrothermal models. A recently developed surface–subsurface model for permafrost thermal hydrology, the Advanced Terrestrial Simulator (ATS), is used in combination with field measurements to achieve the goals of constructing a process-rich model based on plausible parameters and to identify fine-scale controls of ALT in ice-wedge polygon tundra in Barrow, Alaska. An iterative model refinement procedure that cycles between borehole temperature and snow cover measurements and simulations functions to evaluate and parameterize different model processes necessary to simulate freeze–thaw processes and ALT formation. After model refinement and calibration, reasonable matches between simulated and measured soil temperatures are obtained, with the largest errors occurring during early summer above ice wedges (e.g., troughs). The results suggest that properly constructed and calibrated one-dimensional thermal hydrology models have the potential to provide reasonable representation of the subsurface thermal response and can be used to infer model input parameters and process representations. The models for soil thermal conductivity and snow distribution were found to be the most sensitive process representations. However, information on lateral flow and snowpack evolution might be needed to constrain model representations of surface hydrology and snow depth.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Etching and Growth of GaAs

In-place process for etching and growth of gallium arsenide calls for presaturation of etch and growth melts by arsenic source crystal. Procedure allows precise control of thickness of etch and newly grown layer on substrate. Etching and deposition setup is expected to simplify processing and improve characteristics of gallium arsenide lasers, high-frequency amplifiers, and advanced integrated circuits.

Seabaugh, A. C.↗

Sophisticated software systems for small self-contained space shuttle payload G285

The increasing development of small microprocessor systems has allowed the use of more advanced software in the area of control systems. This paper discusses the development of software for small Space Shuttle Getaway Special Project payloads using payload G285 as a case example. The development process behind a space related software package (as in any software package) is a major factor. The design process for G285 is discussed in some detail along with the general scheme behind data acquisition and thermal environmental control for a space related payload. Additionally, key concepts in a software system concern the implementation of redundant systems, error detection, and error response. All of these factors are discussed.

Burkhardt, Robert↗

Intelligent manipulation technique for multi-branch robotic systems

New analytical development in kinematics planning is reported. The INtelligent KInematics Planner (INKIP) consists of the kinematics spline theory and the adaptive logic annealing process. Also, a novel framework of robot learning mechanism is introduced. The FUzzy LOgic Self Organized Neural Networks (FULOSONN) integrates fuzzy logic in commands, control, searching, and reasoning, the embedded expert system for nominal robotics knowledge implementation, and the self organized neural networks for the dynamic knowledge evolutionary process. Progress on the mechanical construction of SRA Advanced Robotic System (SRAARS) and the real time robot vision system is also reported. A decision was made to incorporate the Local Area Network (LAN) technology in the overall communication system.

Chen, Alexander Y. K.↗

Controlled decomposition and oxidation: A treatment method for gaseous process effluents

The safe disposal of effluent gases produced by the electronics industry deserves special attention. Due to the hazardous nature of many of the materials used, it is essential to control and treat the reactants and reactant by-products as they are exhausted from the process tool and prior to their release into the manufacturing facility's exhaust system and the atmosphere. Controlled decomposition and oxidation (CDO) is one method of treating effluent gases from thin film deposition processes. CDO equipment applications, field experience, and results of the use of CDO equipment and technological advances gained from the field experiences are discussed.

Mckinley, Roger J. B., Sr.↗

ACTS T1-VSAT - The intelligent earth station

The functional design of the software for NASA's Advanced Communication Technology Satellite (ACTS) T1-VSAT (Very Small Aperture Terminal) is described. The design provides a flexible interface to allow customized control of a satellite network and to provide external processes with access to network capabilities without requiring modification to the network hardware or software. Some of the envisioned features are: automatic number location; dynamic reconfiguration of the number plan tables; security features of call priority, call preemption, and remote verification; automatic reconfiguration of least cost routing tables; circuit availability verification prior to call setup; audio and video conferencing; on demand broadband dial-up service; on demand dial-up broadband broadcast service; and ISDN. A brief review is also given of the ACTS satellite and network, the network management, and the ACTS T1-VSAT earth station.

Manning, John R.↗

Sensor Validation Software

Under a Small Business Innovation Research contract from Lewis Research Center, Expert Microsystems, Inc. developed SureSense, real-time sensor data validation software. This ultra-reliable control and sensing system product was produced through a partnership in 1994 between Expert Microsystems and Intelligent Software Associates, Inc. SureSense was created in response to a NASA need for verifying the reliability of sensor input that operated advanced automation and control systems. The immediate applications included improving the safety and reliability of Space Shuttle Main Engine operations. The company has structured the software to enable application to virtually any process control environment, such as computer integrated manufacturing, power plants, and hazardous gas sensing and control systems.

Source record↗

Feature Visibility Limits in the Non-Linear Enhancement of Turbid Images

The advancement of non-linear processing methods for generic automatic clarification of turbid imagery has led us from extensions of entirely passive multiscale Retinex processing to a new framework of active measurement and control of the enhancement process called the Visual Servo. In the process of testing this new non-linear computational scheme, we have identified that feature visibility limits in the post-enhancement image now simplify to a single signal-to-noise figure of merit: a feature is visible if the feature-background signal difference is greater than the RMS noise level. In other words, a signal-to-noise limit of approximately unity constitutes a lower limit on feature visibility.

Jobson, Daniel J.↗