SEARCH · Engineering Papers

Results for “active distribution systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Information systems

Space-derived information is the principal product of our civilian space program. Associated data from earth-orbital and planetary spacecraft will exceed the equivalent of some 500 television pictures per second during the 1980's. Cost-effective management of this data flood requires a new look at NASA's overall information systems. Advanced technologies being pursued by industry and NASA could provide order-of-magnitude reductions in data-handling costs and times to permit a massive increase in the use of space-acquired data for both individual and national needs. This paper discusses attendant thrusts in efficient data acquisition, instrument pointing, real-time data management, and low-cost data distribution. Current and planned technology activities in these areas and their anticipated impact on future space missions are described.

Kurzhals, P. R.↗

NASA NTRS1997

Research Related to Multi Degree of Freedom Magnetic Suspensions

This thesis covers the activities associated with (1) recommissioning of the 6-inch Magnetic Suspension and Balance System (MSBS) and (2) enhancing the Annular Suspension and Pointing System (ASPS). These activities continue the program of research in the multi degree of freedom magnetic suspension program at Old Dominion University. The 6-inch MSBS is a large gap magnetic suspension system used as a model support and balance system in wind tunnels. The first stage of recommissioning of the 6-inch MSBS for the 6-inch subsonic wind tunnel is performed. Experimental data and computational results for the magnetic field distribution of the MSBS are given and compared with the estimated magnetic field strength. The comparison indicates that the magnet system is still operating as designed. The Electromagnetic Position Sensor used in the 6-inch MSBS is analyzed before its find reinstatement. The ASPS is a small gap magnetic suspension system providing orientation, mechanical isolation and fine pointing of space payloads. The control system of the ASPS is improved by designing a new code to realize red time control over the system. The original Proportional-Derivative controller is upgraded to a Proportional-Integral-Derivative controller. This progress leads to a system which is more stable and robust with less noise. This new controller is generic and can be adapted to the 6-inch MSBS. Finally, future work on these two systems is proposed.

Britcher, Colin↗

NASA NTRS2005

Adaptive Development

The goal of this research is to develop and demonstrate innovative adaptive seal technologies that can lead to dramatic improvements in engine performance, life, range, and emissions, and enhance operability for next generation gas turbine engines. This work is concentrated on the development of self-adaptive clearance control systems for gas turbine engines. Researchers have targeted the high-pressure turbine (HPT) blade tip seal location for following reasons: Current active clearance control (ACC) systems (e.g., thermal case-cooling schemes) cannot respond to blade tip clearance changes due to mechanical, thermal, and aerodynamic loads. As such they are prone to wear due to the required tight running clearances during operation. Blade tip seal wear (increased clearances) reduces engine efficiency, performance, and service life. Adaptive sealing technology research has inherent impact on all envisioned 21st century propulsion systems (e.g. distributed vectored, hybrid and electric drive propulsion concepts).

Source record↗

NASA NTRS2006

Interactive Visualization of Parking Orbits Around the Moon: An X3D Application for a NASA Lunar Mission Study

The NASA Integrated Modeling and Simulation (IM&S) project aims to develop a collaborative engineering system to include distributed analysis, integrated tools, and web-enabled graphics. Engineers on the IM&S team were tasked with applying IM&S capabilities to an orbital mechanics analysis for a lunar mission study. An interactive lunar globe was created to show 7 landing sites, contour lines depicting the energy required to reach a given site, and the optimal lunar orbit orientation to meet the mission constraints. Activation of the lunar globe rotation shows the change of the angle between the landing site latitude and the orbit plane. A heads-up-display was used to embed straightforward interface elements.

Murphy, Douglas G.↗

NASA NTRS2016

Advancing User Supports with a Structured How-To Knowledge Base for Earth Science Data

It is a challenge to access and process fast growing Earth science data from satellites and numerical models, which may be archived in very different data format and structures. NASA data centers, managed by the Earth Observing System Data and Information System (EOSDIS), have developed a rich and diverse set of data services and tools with features intended to simplify finding, downloading, and working with these data. Although most data services and tools have user guides, many users still experience difficulties with accessing or reading data due to varying levels of familiarity with data services, tools, and/or formats. A type of structured online document, data recipe, were created in beginning 2013 by Goddard Earth Science Data and Information Services Center (GES DISC). A data recipe is the How-To document created by using the fixed template, containing step-by-step instructions with screenshots and examples of accessing and working with real data. The recipes has been found to be very helpful, especially to first-time-users of particular data services, tools, or data products. Online traffic to the data recipe pages is significant to some recipes. In 2014, the NASA Earth Science Data System Working Group (ESDSWG) for data recipes was established, aimed to initiate an EOSDIS-wide campaign for leveraging the distributed knowledge within EOSDIS and its user communities regarding their respective services and tools. The ESDSWG data recipe group started with inventory and analysis of existing EOSDIS-wide online help documents, and provided recommendations and guidelines and for writing and grouping data recipes. This presentation will overview activities of creating How-To documents at GES DISC and ESDSWG. We encourage feedback and contribution from users for improving the data How-To knowledge base.

how-to↗

NASA NTRS2017

On the Execution Control of HLA Federations using the SISO Space Reference FOM

In the Space domain the High Level Architecture (HLA) is one of the reference standard for Distributed Simulation. However, for the different organizations involved in the Space domain (e.g. NASA, ESA, Roscosmos, and JAXA) and their industrial partners, it is difficult to implement HLA simulators (called Federates) able to interact and interoperate in the context of a distributed HLA simulation (called Federation). The lack of a common FOM (Federation Object Model) for the Space domain is one of the main reasons that precludes a-priori interoperability between heterogeneous federates. To fill this lack a Product Development Group (PDG) has been recently activated in the Simulation Interoperability Standards Organization (SISO) with the aim to provide a Space Reference FOM (SRFOM) for international collaboration on Space systems simulations. Members of the PDG come from several countries and contribute experiences from projects within NASA, ESA and other organizations. Participants represent government, academia and industry. The paper presents an overview of the ongoing Space Reference FOM standardization initiative by focusing on the solution provided for managing the execution of an SRFOM-based Federation.

Moller, Bjorn↗

NASA NTRS2021

Demonstrations of System-Level Autonomy for Spacecraft

System-level autonomy refers to autonomously meeting the crosscutting needs of a system through awareness and coordinated control spanning the system's breadth of capabilities. In contrast to function-level autonomy, which focuses on capabilities required to achieve a specific function such as surface navigation or image recognition, system-level autonomy addresses the needs to coordinate and manage activities and resources, and estimate the state, across subsystems. This paper describes demonstrations that were conducted on a spacecraft workstation testbed. The autonomy was provided by system-level planning and execution integrated with system-level estimators of orbit knowledge and spacecraft hardware health. These components are embedded in a system-level framework defining how goals are formed and executed, which elements exist, and how control authority is distributed among components. The planning and execution system at the heart of the framework has the capability to schedule, execute and monitor completion of tasks, as well as plan around unexpected events including new science opportunities and anomalies. The planning and scheduling system is the Multi-mission EXECutive (MEXEC), supported by the system-level health state estimator Model-Based Off-Nominal State Identification and Detection (MONSID), and Autonomous Navigation (AutoNav) algorithms, which determine the orbital system state based on optical observation of other targets. These components are applicable to many kinds of missions on different platforms. These demonstrations were elaborations of earlier experiments conducted on the ASTERIA (Arcsecond Space Telescope Enabling Research In Astrophysics) CubeSat, described in a companion submission [1]. The spacecraft’s extended mission served as an in-flight test platform, during which some individual autonomous capabilities were flown successfully. The autonomy experiments described here were performed on the ASTERIA workstation testbed.

Prather, Maurice↗

NASA NTRS2023

Thermal Desktop Modeling of the RRM3 On-Orbit Cryogenic Methane Storage and Active Cooling Experiment

The storing of cryogenic propellants is an enabling technology for NASA as it moves to expand future missions into low Earth orbit (LEO) and beyond. The Robotic Refueling Mission–3 (RRM3) experiment launched in 2018 and was designed to demonstrate tank self-pressurization during storage and active cooling of liquid methane in microgravity. Creating accurate models using existing datasets from flight experiments such as RRM3 is a vital step toward developing appropriate modeling tools to form pre-test predictions for future flight systems. The goal of this work was to create a working model in Thermal Desktop of the RRM3 source Dewar during the microgravity self-pressurization experiment. The pressure rise, temperature distribution of the fluid inside the tank, and the wall temperatures were all tracked and compared with test data. Initial results show good agreement between each of these metrics and the experimental results. This work is ongoing and will yield further insights into the thermal behavior of cryogens in microgravity.

Tank self-pressurization↗

NASA NTRS1985

The investigation of tethered satellite system dynamics

The tether control law to retrieve the satellite was modified in order to have a smooth retrieval trajectory of the satellite that minimizes the thruster activation. The satellite thrusters were added to the rotational dynamics computer code and a preliminary control logic was implemented to simulate them during the retrieval maneuver. The high resolution computer code for modelling the three dimensional dynamics of untensioned tether, SLACK3, was made fully operative and a set of computer simulations of possible tether breakages was run. The distribution of the electric field around an electrodynamic tether in vacuo severed at some length from the shuttle was computed with a three dimensional electrodynamic computer code.

Lorenzini, E.↗

NASA NTRSDate not supplied

More Data Needed for Failure Rate Estimation, Validation, and Uncertainty Reduction

The currently planned schedule for advanced Environmental Control and Life Support System (ECLSS) development and test activities to support human exploration missions is unlikely to generate sufficient data to enable statistically-supportable, precise Orbital Replacement Unit (ORU) failure rate estimates to meet existing crew safety expectations. Accurate and precise failure rate estimates are critical for missions beyond Low Earth Orbit (LEO) because current risk mitigation approaches –namely regular resupply and rapid abort capabilities –will not be available. Safe operations will depend on mission planners’ ability to accurately forecast spares demand and efficiently provide the necessary resources. However, even after more than a decade of International Space Station (ISS) ECLSS operations, a significant amount of uncertainty remains in failure rate estimates. Uncertain or inaccurate failure rates result in increased risk and spares mass. A Bayesian estimation approach, such as the one currently implemented by the ISS Program, can reduce uncertainty by incorporating engineering judgement into failure rate estimates. However, experience on the ISS and with other complex systems shows that these prior failure rate estimates are often inaccurate. In addition, prior estimates are typically point values; some level of uncertainty must be added to convert these into probability distributions for Bayesian updating, and there are several potential methods for doing so. Due to the low rate of data collection, any inaccuracy in theseprior estimates currently hasa strong influence on the end result. This paper examines the challenges associated with failure rate estimation, validation, and uncertainty reduction in the context of ECLSS development for beyond-LEO missions. A variety of techniques for generating and updating Bayesian priors are discussed and evaluated using both real-world and simulated data. Potential solutions for improving failure rate estimation, including testing additional units, are analyzed and discussed, and a set of recommendations are provided for next-generation system development activities.

Reliability↗

NASA NTRSDate not supplied

More Data Needed for Failure Rate Estimation, Validation, and Uncertainty Reduction

Reliability↗

NASA NTRS1979

Lunar laser ranging data identification and management

Activity under the subject grant during the first half of fiscal year 1979 at the University of Texas at Austin is reported. Raw lunar laser ranging data submitted by McDonald Observatory, Fort Davis, Texas and by the Australian Division of National Mapping at Orroral Valley, Australia were processed. This processing includes the filtering of signal events from noise photons, normal point formation, data archive management, and data distribution. System-wide program maintenance and up-grade carried out wherever and whenever necessary. Lunar laser ranging data is being transmitted from Austin to Paris for the extraction of earth rotation information during the EROLD campaign.

Source record↗

NASA NTRS1983

Data system architecture considerations for a space station

The functions that a space station could serve are outlined and details of the data systems requirements are discussed. The data system design will be guided by an overall space systems plan, and will feature distributed, layered architecture, user friendliness, hierarchical control, technology transparency, standard interfaces, and automated engineering tools. The station would begin with a limited core capability and evolve to serve functions defined thereafter. The automation of the engineering tools will be necessary to permit an optimized, minimized crew to control all functions of the space station, while at the same time freeing the crew from being actively involved in maintaining the nominal life support functions of the equipment. One major criterion is that the software must be error free, while another is adaptibility to changing space station configurations and demands.

Connell, E. B.↗

NASA NTRS1984

Current carriers for the field-aligned current system

The Dynamics Explorer satellites have returned a large body of data containing high resolution magnetometer measurements and distributions of charged particles of all but thermal electrons. From these data the relations of the field aligned currents to particle precipitation structures were investigated and the charge carriers were identified. Results include the following: (1) during very quiet periods, field aligned currents exist primarily as fine structure; (2) during onset of substorms, region 1 and region 2 become clearly evident but contain significant structure; (3) as magnetic activity subsides, current regions become less distinct, and structure becomes more dominant; (4) the distribution of the upward currents derived from magnetometer data and calculated from suprathermal electron data agree remarkably well in shape but not necessarily in magnitude; (5) at all local times, 5 eV electrons seldom carry most of the upward current; (6) except for the accelerated inverted-V electrons, the dominant upward current carriers which are measured are below 500 eV and are distributed in energy; (7) dusk upward currents (region 1) are associated with the boundary plasma sheet; and (8) suprathermal electron bursts are important current carrying structures.

Hoffman, R. A.↗

NASA NTRS1985

Current carriers for the field-aligned current system

The Dynamics Explorer satellites have returned a large body of data containing high resolution magnetometer measurements and distributions of charged particles of all but thermal electrons. From these data the relations of the field aligned currents to particle precipitation structures were investigated and the charge carriers were identified. Results include the following: (1) during very quiet periods, field aligned currents exist primarily as fine structure; (2) during onset of substorms, region 1 and region 2 become clearly evident but contain significant structure; (3) as magnetic activity subsides, current regions become less distinct, and structure becomes more dominant; (4) the distribution of the upward currents derived from magnetometer data and calculated from suprathermal electron data agree remarkably well in shape but not necessarily in magnitude; (5) at all local times, 5 eV electrons seldom carry most of the upward current; (6) except for the accelerated inverted-V electrons, the dominant upward current carriers which are masured are below 500 eV and are distributed in energy; (7) dusk upward currents (region 1) are associated with the boundary plasma sheet; and (8) suprathermal electron bursts are important current carrying structures.

Hoffman, R. A.↗

NASA NTRS1987

NASA's plans to observe the earth's atmosphere with lidar

The development of two active laser remote-sensing systems designed for the Earth Observing System (EOS) as part of the Space Station for the 1990s is discussed. The operational capabilities of lidar in the Lidar Atmospheric Sounder and Altimeter (LASA) are considered, and the synergistic use of LASA and EOS data, as in the combination of LASA-determined vertical profiles of water vapor and two-dimensional EOS depictions of water vapor distribution, is emphasized. The Laser Atmospheric Wind Sounder will measure wind profiles with an accuracy of a few meters per second, and will provide samples at intervals of about 100 km horizontally for layers 1 km thick.

Curran, Robert J.↗

NASA NTRS1990

Electromechanical actuation for thrust vector control applications

The advanced launch system (ALS), is a launch vehicle that is designed to be cost-effective, highly reliable, and operationally efficient with a goal of reducing the cost per pound to orbit. An electromechanical actuation (EMA) system is being developed as an attractive alternative to the hydraulic systems. The controller will integrate 20 kHz resonant link power management and distribution (PMAD) technology and pulse population modulation (PPM) techniques to implement field-oriented vector control (FOVC) of a new advanced induction motor. The driver and the FOVC will be microprocessor controlled. For increased system reliability, a built-in test (BITE) capability will be included. This involves introducing testability into the design of a system such that testing is calibrated and exercised during the design, manufacturing, maintenance, and prelaunch activities. An actuator will be integrated with the motor controller for performance testing of the EMA thrust vector control (TVC) system. The EMA system and work proposed for the future are discussed.

Roth, Mary Ellen↗

NASA NTRS1991

Visual and near-IR spectrophotometry of asteroids

We have been continuing our studies of the spectral properties of dark asteroids in the solar system. From these studies we expect to learn about the distribution of volatile materials, such as water in clay materials (water of hydration) and how the asteroids may relate to the comets. Our most recent work has been concentrating on simultaneous visual and near infrared photometry near Earth, main belt, and trojan asteroids. We have made observations of some unusual asteroids such as Chiron, which has recently shown cometary activity, and 944 Hidalgo, which has a comet-like orbit. We have also begun studies of the small, dark satellites of Mars and Jupiter in order to understand better how they may relate to the steroids. Could they actually be captured asteroids or comets?

Lebofsky, Larry A.↗