SEARCH · Engineering Papers

Results for “WALLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Research on non-planar wall geometries for turbulence control and skin-friction reduction

Eight turbulence-control/drag-reduction concepts under study at NASA Langley Research Center are discussed. These concepts include: slot injection, ion wind, large-eddy breakup devices, riblets, relaminarization, convex curvature, passive porous walls, and rigid wavy walls. Of these concepts, passive porous walls and small wavelength wavy walls are found to increase drag. Riblets, slot injection, and large-eddy breakup devices reduce net turbulent drag, at least for some conditions. The ion wind, relaminarization, and convex curvature studies are still in the early stages and require further work to evaluate their applicability for drag reduction.

Hefner, J. N.↗

NASA NTRS1984

Adaptation of two-dimensional transonic analysis code, TSFOIL, for use in modeling adaptive wall test sections

The effects of the elastic deformation of the wind tunnel wall held to a streamline-like shape were simulated numerically. The wall itself is simulated by a finite element model and is allowed to deform under the pressure loading developing in the wind tunnel with an airfoil model present. A modified version of the transonic analysis program, TSFOIL, is then used to determine the resulting flow field with the effects of the deformed wall included, the shape of the wall and the flow field. Once a result from a particular operating condition was obtained, the pressure distribution on the airfoil in the wind tunnel model is compared with solutions generated by TSFOIL in the free air mode.

Webb, J.↗

NASA NTRS1984

A tectonic geomorphological classification of the walls of Valles Marineris

Viking 1 imagery of the Coprates NW quadrangle was used in an attempt to develop a geomorphic classification scheme for the canyon walls of Valles Marineris analogous to that devised to evaluate the relative tectonic activity of terrestrial mountain fronts. The four classes of walls established are described and mapped. Regions where a class cannot be assigned owing to the presence of intra canyon sediments, landslides, or landslide debris; and apparent fault scarps that occur on the canyon floor rather than at the wall base are also shown. The most striking feature is the concentration of active tectonic features within lus Chasma, and to a lesser extent in Tithonium Chasma, as well as along the north walls of Coprates and East Candor.

Spencer, J. R.↗

NASA NTRS1984

Wall pressure measurements for three-dimensional transonic tests

An experiment is described that provides input data for wind-tunnel wall interference assessment methods that are based on test-section wall pressure distributions. Wall pressures have been measured along orifice rows on the test-section walls during longitudinal force tests on two model sizes of the same configuration. These data were acquired at Mach numbers between 0.60 and 0.90 in a small, atmospheric transonic wind tunnel. A sample of the data and a discussion of results are presented.

Sewall, W. G.↗

NASA NTRS1984

Interference from slotted walls

Wall interference is made predominant in tunnel models and by wall geometries to facilitate the study of slot flow. The viscous effects in slots are studied by two dimensional measurements of flow. Wall interference is assessed by measuring pressure distributions at two levels near the walls. Interference on lifting delta wings is calculated. Pressure distributions at inner boundaries show basis axisymetries between the pressure side and the suction side, pointing to the necessity of having wider slots on the pressure side.

Berndt, S. B.↗

NASA NTRS1984

An inerference assessment approach for a three-dimensional slotted tunnel with sparse wall pressure data

The various procedures referred to as wall interference assessment and correction procedures presume the existence of a surface distribution of data (usually static pressure) measured over a surface on or near the tunnel walls for each test point to be assessed. An alternative approach in which a reasonably sophisticated computer model of the test section flow would be fitted parametrically to a sparse set of measured data is presented. The measurements provides line distributions of static pressure near the center lines of the top, side and bottom walls. The development of a test section model incorporating explicit recognition of discrete slots of finite length with controlled flow reentry into the solid wall downstream portion of the tunnel is shown.

Kemp, W. B., Jr.↗

NASA NTRS1985

Analysis of the electromagnetic scattering from an inlet geometry with lossy walls

One of the primary goals is to develop an approximate but sufficiently accurate analysis for the problem of electromagnetic (EM) plane wave scattering by an open ended, perfectly-conducting, semi-infinite hollow circular waveguide (or duct) with a thin, uniform layer of lossy or absorbing material on its inner wall, and with a simple termination inside. The less difficult but useful problem of the EM scattering by a two-dimensional (2-D), semi-infinite parallel plate waveguide with an impedance boundary condition on the inner walls was chosen initially for analysis. The impedance boundary condition in this problem serves to model a thin layer of lossy dielectric/ferrite coating on the otherwise perfectly-conducting interior waveguide walls. An approximate but efficient and accurate ray solution was obtained recently. That solution is presently being extended to the case of a moderately thick dielectric/ferrite coating on the walls so as to be valid for situations where the impedance boundary condition may not remain sufficiently accurate.

Myung, N. H.↗

NASA NTRS1985

Generalized adaptive-wall wind tunnels

Adaptive-wall technology is being seriously considered for many aeronautical wind tunnel applications. A new degree of freedom is introduced into adaptive-wall wind tunnels. It is shown that the adaptive control system used to adjust wall boundary conditions may be used to select a wide variety of flow fields. These flow fields, in turn, maybe directly related to many useful unconfined or semiconfined flows. The generalized adaptive-wall concept is demonstrated for both two- and three-dimensional flows using simple analytical techniques.

Davis, S. S.↗

NASA NTRS1986

Computer simulation of a wind tunnel test section with discrete finite-length wall slots

A computer simulation of a slotted wind tunnel test section which includes a discrete, finite-length wall slot representation with plenum chamber constraints and accounts for the nonlinear effects of the dynamic pressure of the slot outflow jet and of the low energy of slot inflow air was developed. The simulation features were selected to be those appropriate for the intended subsequent use of the simulation in a wall interference assessment procedure using sparsely located wall pressure measurements. It is demonstrated that accounting for slot discreteness is important in interpreting wall pressure measured between slots, and that accounting for nonlinear slot flow effects produces significant changes in tunnel-induced velocity distributions and, in particular, produces a longitudinal component of tunnel-induced velocity due to model lift. A characteristic mode of tunnel flow interaction with constraints imposed by the plenum chamber and diffuser entrance is apparent in simulation results and is derived analytically through a simplified analysis.

Kemp, W. B., Jr.↗

NASA NTRS1986

Wall effects in wind tunnels

A synthesis of current trends in the reduction and computation of wall effects is presented. Some of the points discussed include: (1) for the two-dimensional, transonic tests, various control techniques of boundary conditions are used with adaptive walls offering high precision in determining reference conditions and residual corrections. A reduction in the boundary layer effects of the lateral walls is obtained at T2; (2) for the three-dimensional tests, the methods for the reduction of wall effects are still seldom applied due to a lesser need and to their complexity; (3) the supports holding the model of the probes have to be taken into account in the estimation of perturbatory effects.

Chevallier, J. P.↗

NASA NTRS1986

Response of hot element flush wall gauges in oscillating laminar flow

The time dependent response characteristics of flush-mounted hot element gauges used as instruments to measure wall shear stress in unsteady periodic air flows were investigated. The study was initiated because anomalous results were obtained from the gauges in oscillating turbulent flows for the phase relation of the wall shear stress variation, indicating possible gauge response problems. Flat plate laminar oscillating turbulent flows characterized by a mean free stream velocity with a superposed sinusoidal variation were performed. Laminar rather than turbulent flows were studied, because a numerical solution for the phase angle between the free stream velocity and the wall shear stress variation that is known to be correct can be obtained. The focus is on comparing the phase angle indicated by the hot element gauges with corresponding numerical prediction for the phase angle, since agreement would indicate that the hot element gauges faithfully follow the true wall shear stress variation.

Giddings, T. A.↗

NASA NTRS1986

Wind tunnel wall interference in V/STOL and high lift testing: A selected, annotated bibliography

This bibliography, with abstracts, consists of 260 citations of interest to persons involved in correcting aerodynamic data, from high lift or V/STOL type configurations, for the interference arising from the wind tunnel test section walls. It provides references which may be useful in correcting high lift data from wind tunnel to free air conditions. References are included which deal with the simulation of ground effect, since it could be viewed as having interference from three tunnel walls. The references could be used to design tests from the standpoint of model size and ground effect simulation, or to determine the available testing envelope with consideration of the problem of flow breakdown. The arrangement of the citations is chronological by date of publication in the case of reports or books, and by date of presentation in the case of papers. Included are some documents of historical interest in the development of high lift testing techniques and wall interference correction methods. Subject, corporate source, and author indices, by citation numbers, have been provided to assist the users. The appendix includes citations of some books and documents which may not deal directly with high lift or V/STOL wall interference, but include additional information which may be helpful.

Tuttle, M. H.↗

NASA NTRS1986

Sharply curved turn around duct flow predictions using spectral partitioning of the turbulent kinetic energy and a pressure modified wall law

Computational predictions of turbulent flow in sharply curved 180 degree turn around ducts are presented. The CNS2D computer code is used to solve the equations of motion for two-dimensional incompressible flows transformed to a nonorthogonal body-fitted coordinate system. This procedure incorporates the pressure velocity correction algorithm SIMPLE-C to iteratively solve a discretized form of the transformed equations. A multiple scale turbulence model based on simplified spectral partitioning is employed to obtain closure. Flow field predictions utilizing the multiple scale model are compared to features predicted by the traditional single scale k-epsilon model. Tuning parameter sensitivities of the multiple scale model applied to turn around duct flows are also determined. In addition, a wall function approach based on a wall law suitable for incompressible turbulent boundary layers under strong adverse pressure gradients is tested. Turn around duct flow characteristics utilizing this modified wall law are presented and compared to results based on a standard wall treatment.

Santi, L. Michael↗

NASA NTRS1987

Integral method of wall interference correction in low-speed wind tunnels

The analytical solution of Poisson's equation, derived form the definition of vortex, was applied to the calculation of interference velocities due to the presence of wind tunnel walls. This approach, called the Integral Method, allows an accurate evaluation of wall interference for separated or more complicated flows without the need for considering any features of the model. All the information necessary for obtaining the wall correction is contained in wall pressure measurements. The correction is not sensitive to normal data-scatter, and the computations are fast enough for on-line data processing.

Zhou, Changhai↗

NASA NTRS1987

The hub wall boundary layer development and losses in an axial flow compressor rotor passage

The hub wall boundary layer development in a compressor stage including the rotor passage is experimentally investigated. A miniature five-hole probe was employed to measure the hub wall boundary layer inside the inlet guide vane passage, upstream and far downstream of the rotor. The hub wall boundary layer inside the rotor passage was acquired using a rotating miniature five-hole probe. The boundary layer is well behaved upstream and far downstream of the rotor. The migration of the hub wall boundary layer towards the suction surface corner is observed. The limiting streamline angles and static pressure distribution across the stage were also measured. The mean velocity profiles and the integral properties upstream, inside and downstream of the rotor, and the losses are presented and interpreted.

Murthy, K. N. S.↗

NASA NTRS1986

Wall turbulence control

A variety of wall turbulence control devices which were experimentally investigated are discussed; these include devices for burst control, alteration of outer flow structures, large eddy substitution, increased heat transfer efficiency, and reduction of wall pressure fluctuations. Control of pre-burst flow was demonstrated with a single, traveling surface depression which is phase-locked to elements of the burst production process. Another approach to wall turbulence control is to interfere with the outer layer coherent structures. A device in the outer part of a boundary layer was shown to suppress turbulence and reduce drag by opposing both the mean and unsteady vorticity in the boundary layer. Large eddy substitution is a method in which streamline curvature is introduced into the boundary layer in the form of streamwise vortices. Riblets, which were already shown to reduce turbulent drag, were also shown to exhibit superior heat transfer characteristics. Heat transfer efficiency as measured by the Reynolds Analogy Factor was shown to be as much as 36 percent greater than a smooth flat plate in a turbulent boundary layer. Large Eddy Break-Up (LEBU) which are also known to reduce turbulent drag were shown to reduce turbulent wall pressure fluctuation.

Wilkinson, Stephen P.↗

NASA NTRS1987

A theory for turbulent curved wall jets

An attempt is made to formulate the simplest possible model for the flow of a wall jet emanating from a two dimensional source into quiescent surroundings in the presence of a wall of arbitrary shape. The method used self similar profiles for the mean velocity together with a simple eddy viscosity model. The streamwise and radial momentum equations are integrated across the wall jet flow to give an expression for the momentum balance including the effect of the pressure gradient induced by the rate of change of surface curvature. The streamwise momentum equation is also evaluated at the point of maximum velocity to provide a second equation and thereby permit a solution for the two unknown quantities, the jet half width and the maximum velocity. This approach provides approximate closed form solutions for the flow of the wall jet over surfaces of various shapes, and in particular permits a direct comparison with the available experimental results for plane, cylindrical or logarithmic spiral surfaces.

Roberts, Leonard↗

NASA NTRS1987

Active layer model for wall-bounded turbulence

The active-layer model for wall-bounded turbulence hypothesizes that the nonlinear terms are large only in a thin layer near the wall, and hence the turbulence in the region outside the active inner layer can be modeled as a linear fluctuating flow driven by the active layer. This hypothesis is tested using data obtained from a direct simulation of turbulent channel flow. It is found that the nonlinear effects are the strongest near the wall with a maximum at around y sup + = 20 and, outside the near-wall region, these involve primarily the cascading mechanism leading to dissipation.

Landahl, M. T.↗