Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VISIBLE RADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

THE EXTRAGALACTIC BACKGROUND LIGHT, THE HUBBLE CONSTANT, AND ANOMALIES: CONCLUSIONS FROM 20 YEARS OF TeV GAMMA-RAY OBSERVATIONS

Ground-based observatories have been collecting 0.2–20 TeV gamma-rays from blazars for about twenty years. These gamma-rays can experience absorption along the line of sight due to interactions with the extragalactic background light (EBL). In this paper, we show that the gamma-ray optical depth can be reduced to the convolution product of an EBL kernel with the EBL intensity, assuming a particular form for the EBL evolution. We extract the absorption signal from the most extensive set of TeV spectra from blazars collected so far and unveil a broadband EBL spectrum from mid-ultraviolet to far-infrared. This spectrum is in good agreement with the accumulated emission of galaxies, constraining unresolved populations of sources. We propose a data-driven estimate of the Hubble constant based on the comparison of local and gamma-ray measurements of the EBL. After setting stringent upper-limits on the redshift of four TeV blazars, we investigate the 106 gamma-ray spectra in our sample and find no significant evidence for anomalies. The intrinsic TeV spectra are not harder than their GeV counterpart, and no spectral upturn is visible at the highest optical depths. Finally, we investigate a modification of the pair-creation threshold due to Lorentz invariance violation. A mild excess prevents us from ruling out an effect at the Planck energy, and we constrain for the first time the energy scale of the modification to values larger than 60% of the Planck energy.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonlocality from N>2 independent single-photon emitters

We demonstrate that intensity correlations of second order in the fluorescence light of N>2 single-photon emitters may violate locality while the visibility of the signal remains below 1/{radical}(2){approx_equal}71%. For this, we derive a homogeneous Bell-Wigner-type inequality, which can be applied to a broad class of experimental setups. We trace the violation of this inequality back to path entanglement created by the process of detection.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of black TiO2 with efficient visible-light photocatalytic activity by ultraviolet light irradiation and low temperature annealing

Highlights: • In this work, we have prepared black titanium dioxide (B-TiO{sub 2}) nanoparticals in combination with ultraviolet light and low temperature annealing. This method is simple, efficient and environmentally friendly. • The synthesis mechanism of the black B-TiO{sub 2} nanomaterials was analyzed by combining the different characterization data with the first-principles calculation results. • The Ti-O lattice and structure of the B-TiO{sub 2} sample did not change after low-temperature annealing. • The process of H-doping results in a reduction of the localized Ti{sup 3+} states, that are also the recombination centers of excited electrons and holes. • These nanoparticles can absorb a amount of visible light and degrade the organic pollution. - Abstract: Herein, a simple, efficient, and environmentally friendly strategy to prepare black TiO{sub 2} nanoparticles has been reported; the procedure combines the ultraviolet light irradiation and low-temperature annealing (300 °C) with continuous N{sub 2} flow under atmospheric pressure. The samples were characterized by the various techniques, such as X-ray diffraction, high resolution transmission electron microcopy, Raman spectroscopy, X-ray photoelectron spectroscopy. The photocatalytic degradation of the organic contaminant Rhodamine B was investigated when black TiO{sub 2} nanoparticles was irradiaed with ultraviolet light and visible light. The black TiO{sub 2} material possesses an anatase phase and is able to absorb a high amount of photon energy in the visible light region, effectively driving photochemical degradation reactions. The enhancement of the photocatalytic activity can be attributed to the following: first, the hydrogen ions decrease the localized Ti{sup 3+} states (which are also the e{sup −}-h{sup +} recombination centers) leading to a more efficient separation of the electron-hole pairs; secondly, the conduction band electrons in black TiO{sub 2} nanoparticles are responsible for strong absorption of visible light. Consequently, the photocatalytic degradation of Rhodamine B can be significantly enhanced using black TiO{sub 2} nanoparticles. This work proves that hydrogenated black TiO{sub 2} promotes the absorption of the entire electromagnetic spectrum and exhibits high photocatalytic activity under solar light irradiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cathodoluminescence Microscopy and Spectroscopy of Planar Deformation Features of Shocked Zircon from the Vredefort Impact Structure, South Africa

Thorough understanding of the shock metamorphic signatures of zircon will provide a basis for the application of this mineral as a powerful tool for the study of terrestrial impact structures and formations. This paper of the cathodoluminescence (CL) spectroscopic signatures of naturally shocked zircon crystals from the Vredefort Dome, South Africa contributes to the understanding of the formation of microdeformation in zircon under very high pressures. All investigated shocked samples shows an inverse relationship between the brightness of the backscattered electron (BSE) signal and the corresponding cathodoluminescence intensity of the zonation patterns. The CL spectra of samples are characterised by narrow emission lines and broad bands in the region of visible light and in the near-ultraviolet range. The emission lines result from rare earth element activators and the broad bands are associated with lattice defects. The results show a clear relationship between the CL properties of zircon and shock pressure, which confirm the possible use of these methods as shock indicators.

36 MATERIALS SCIENCE↗

Photoresponse mechanisms of a graphene-based quantum-dot monolayer structure

Hybrid structures of graphene sheets based quantum dots (QDs) are produced via Langmuir–Blodgett (LB) technique. Morphology of the structures produced is investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Two types of hybrid structures are prepared from graphene covered by sublayers of CdSe/CdS/ZnS and CdSe/ZnS QDs. Photocurrent properties are studied by current–voltage characteristics (CVCs) in the dark and while exposed to visible light and ultraviolet (UV) light with an excitation wavelength of 365 nm. The rise and decay times of graphene and QDs after UV illumination are estimated. (laser applications and other topics in quantum electronics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancement under UV–visible and visible light of the ZnO photocatalytic activity for the antibiotic removal from aqueous media using Ce-doped Lu3Al5O12 nanoparticles

We report the first synthesis of Ce-doped Lu{sub 3}Al{sub 5}O{sub 12} Nanoparticles/ZnO Nanostructure (LuAG:Ce/ZnO NS) via a rapid hydrolysis/condensation of Zn(OAc){sub 2} on the surface of LuAG:Ce NPs. The structural, morphological and optical properties of LuAG:Ce/ZnO NS have been fully investigated using X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM), High Resolution Transmission Electron Microscopy (HRTEM), Energy Dispersive X-ray Spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR), diffuse reflectance UV–visible spectroscopy and N2 adsorption/desorption measurements. Results showed that ZnO Nanocrystals (ZnO NCs) of about 10 nm diameter are homogeneously grown on the surface of 100 nm LuAG:Ce NPs in a core/shell-like structure. The photocatalytic activity of the as-prepared nanostructure has been evaluated throught the photodegradation of sulfathiazole (STZ), a molecule widely used as antibiotic, under UV–vis and visible light irradiation. Results showed that STZ undergoes much higher photodegradation in the presence of LuAG:Ce/ZnO NS compared to the pure ZnO NCs under both UV–vis and visible light. This enhanced photocatalytic capability was found to result from higher specific surface area and visible light absorption in LuAG:Ce/ZnO NS, which allowed for more surface active sites and enhanced hydroxyl radicals (·OH) production from the nanostructured photocatalyst. The recyclability of LuAG:Ce/ZnO NS was also demonstrated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microwave heating synthesis and formation mechanism of chalcopyrite structured CuInS{sub 2} nanorods in deep eutectic solvent

Graphical abstract: Chalcopyrite structured CuInS{sub 2} nanorods were synthesized by an environmentally friendly microwave heating method in deep eutectic solvent. Results show that microwave heating time plays an important role in the formation of CuInS{sub 2} nanostructure phase. The SEM results indicated that the obtained CuInS{sub 2} nanostructures display rod-like morphology with diameters of about 40 nm and lengths of about 400 nm. The UV–vis spectrum results indicated that the CuInS{sub 2} nanorods exhibit strong absorption from the entire visible light region to the near-infrared region beyond 1100 nm. The possible growth mechanism of CuInS{sub 2} nanorods was discussed. - Abstract: Chalcopyrite structured CuInS{sub 2} nanorods were synthesized by an environmentally friendly microwave heating method in deep eutectic solvent. The as-synthesized CuInS{sub 2} nanorods were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), respectively. The results indicated that the obtained CuInS{sub 2} nanostructures display rod-like morphology with diameters of about 40 nm and lengths of about 400 nm. The influences of microwave heating time on the formation of CuInS{sub 2} phase were discussed. Ultraviolet–visible (UV–vis) and photoluminescence (PL) spectra were utilized to investigate the optical properties of CuInS{sub 2} nanorods. The results showed that the as-synthesized CuInS{sub 2} nanorods exhibit strong absorption from the entire visible light region to the near-infrared region beyond 1100 nm. PL spectrum of the as-synthesized CuInS{sub 2} nanorods displays an emission peak centered at 580 nm under excitation wavelength of 366 nm at room temperature. The possible growth mechanism of CuInS{sub 2} nanorods was discussed.

36 MATERIALS SCIENCE↗

Hybrid Magnetic Core-Shell Nanophotocatalysts for Environmental Applications

This research study describes a facile sol-gel method to creating hybrid iron (III) oxide/silica/titania nanomaterials decorated with gold nanoparticles for use in environmental applications. The multi-functional composition of the nanomaterials allows for photocatalyzed reactions to occur in both the visible and the UV range. The morphologies, elemental composition, and surface charge of the nanoparticles were determined by Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), and Phase Analysis Light Scattering (PALS), respectively. The photocatalytic activity of the synthesized hybrid nanoparticles for breaking down a model analyte, methyl orange (MO), was then evaluated using UV-Vis Spectroscopy. The efficiency of the photocatalyst under UV light irradiation was measured and compared to other well-studied nanophotocatalysts, namely titanium oxide and iron oxide nanoparticles. The concentration dependence of both the photocatalyst and the analyte was also investigated. By utilizing the known UV-active properties of TiO 2 , the magnetic properties of Fe 2 O 3 , the optical properties of gold in the visible range of the spectrum, and the high stability of silica, a novel, highly efficient photocatalyst that is active on a broad range of the spectrum (UV-Vis) can be created to destroy organic pollutants in wastewater streams.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Wafer-scale two-dimensional Au-TiO{sub 2} bilayer films for photocatalytic degradation of Palmitic acid under UV and visible light illumination

Highlights: • Successful wafer-scale atomic layer deposition of 2D Au-TiO{sub 2} bilayer photocatalyst films. • The efficient degradation of fatty acid by tailoring 2D TiO{sub 2} films under UV and visible light illumination. • Improved visible light photocatalytic activity and photocurrent density of 2D Au-TiO{sub 2} bilayer films. • Comparable photocatalytic performance of ultra-thin 2D TiO{sub 2} and thick TiO{sub 2} films under UV light illumination. - Abstract: Bilayer Au-TiO{sub 2} configuration with two-dimensional (2D) TiO{sub 2} films enabled sensible improvement in photocatalytic degradation of Palmitic Acid (PA) and also the enhancement of current density under visible light illumination. The improved visible light photocatalytic and photocurrent properties were attained when 35 nm thick 2D TiO{sub 2} film was developed by atomic layer deposition (ALD) on Si/SiO{sub 2}-Au substrate. The Au-TiO{sub 2} bilayer demonstrated the improved photocatalytic and photovoltaic performances compared with those TiO{sub 2} films developed on Si/SiO{sub 2} bare substrate. These improvements can be attributed to the plasmonic effects of Au film acting as antenna for visible light and also serving as hole acceptor during photocatalysis process. The proposed mechanisms for enhanced visible light performance of bilayer films are hot electron injection and the formation of hot spots at Au-TiO{sub 2} interface which contributed to the electron injection to conduction band of TiO{sub 2} or facilitated the separation of generated electron-hole pairs at Au-TiO{sub 2} Schottky junction.

36 MATERIALS SCIENCE↗

Photo-modulated thin film transistor based on dynamic charge transfer within quantum-dots-InGaZnO interface

The temporal development of next-generation photo-induced transistor across semiconductor quantum dots and Zn-related oxide thin film is reported in this paper. Through the dynamic charge transfer in the interface between these two key components, the responsibility of photocurrent can be amplified for scales of times (∼10{sup 4} A/W 450 nm) by the electron injection from excited quantum dots to InGaZnO thin film. And this photo-transistor has a broader waveband (from ultraviolet to visible light) optical sensitivity compared with other Zn-related oxide photoelectric device. Moreover, persistent photoconductivity effect can be diminished in visible waveband which lead to a significant improvement in the device's relaxation time from visible illuminated to dark state due to the ultrafast quenching of quantum dots. With other inherent properties such as integrated circuit compatible, low off-state current and high external quantum efficiency resolution, it has a great potential in the photoelectric device application, such as photodetector, phototransistor, and sensor array.

36 MATERIALS SCIENCE↗

Facile sonochemical synthesis of Ag modified Bi{sub 4}Ti{sub 3}O{sub 12} nanoparticles with enhanced photocatalytic activity under visible light

Highlights: • Ag doped/dispersed Bi{sub 4}Ti{sub 3}O{sub 12} nanoparticles synthesized sonochemically. • Undoped Bi{sub 4}Ti{sub 3}O{sub 12} exhibited 100% RhB degradation in 45 min under UV light. • Under visible light 100% RhB degradation occured with Bi{sub 4}Ti{sub 3}O{sub 12} in 150 min. • Improved photodegradation of RhB by Ag doped Bi{sub 4}Ti{sub 3}O{sub 12} in visible light. • The Bi{sub 4}Ti{sub 3}O{sub 12}:Ag(5%) sample photodegrades RhB from wastewater under sunlight. - Abstract: Unmodified and Ag modified Bi{sub 4}Ti{sub 3}O{sub 12}:Ag(x%) (x = 2 and 5) nanoparticles have been synthesized sonochemically and characterized using X-ray diffraction, X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area analysis, scanning electron microscopy (SEM), energy dispersion X-ray spectrum (EDS) analysis, transmission electron microscopy (TEM) and UV–vis diffuse reflectance spectroscopy. In the presence of unmodified Bi{sub 4}Ti{sub 3}O{sub 12} nanoparticles, complete photocatalytic degradation of Rhodamine B (RhB) was observed under UV light within 45 min. However, the response of this material for photodegradation of RhB under visible light was poor and could be greatly enhanced with Ag modification. A possible mechanism for this observation has been discussed in detail. The reusability of the material has also been tested and it has been found to have favorable recycling capability. Moreover, the Ag- modified Bi{sub 4}Ti{sub 3}O{sub 12} has been tested for RhB degradation from a wastewater sample under sunlight and promising results have been obtained.

36 MATERIALS SCIENCE↗

Enhanced visible-light photocatalytic activity of Bi2O2CO3 nanoplates by Fe-doping in the degradation of rhodamine B

Highlights: • Fe-doped Bi{sub 2}O{sub 2}CO{sub 3} nanoplates were prepared using a solvothermal method. • Fe doping in Bi{sub 2}O{sub 2}CO{sub 3} was found to greatly decrease the corresponding band gap energy. • The photocatalytic activity of Fe-doped Bi{sub 2}O{sub 2}CO{sub 3} was significantly enhanced in the photocatalytic degradation of RhB. - Abstract: In this study, Fe-doped Bi{sub 2}O{sub 2}CO{sub 3} nanoplates were fabricated using a facile solvothermal approach. The successful substitution of Bi{sup 3+} by Fe{sup 3+} was identified by a shift in the (010) diffraction peak of Bi{sub 2}O{sub 2}CO{sub 3} at 2θ = 30.2°. A controllable amount of Fe doping in Bi{sub 2}O{sub 2}CO{sub 3} was utilized to gradually tailor the band gap energy from 3.39 eV to 2.68 eV, resulting in the absorption edge switched from ultraviolet light to visible-light region. Compared to the pure Bi{sub 2}O{sub 2}CO{sub 3}, Fe-doped Bi{sub 2}O{sub 2}CO{sub 3} nanoplates exhibited an enhanced visible-light photocatalytic activity. With the gradual increase of Fe dopant amount, the photocatlytic activity of Fe-doped Bi{sub 2}O{sub 2}CO{sub 3} increased initially, and then slightly decreased. Further reactive species trapping experiments demonstrated that holes (h{sup +}) and superoxide anion radicals (O{sub 2}{sup −}) played important roles in the photocatalytic oxidation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Double side electroluminescence from p-NiO/n-ZnO nanowire heterojunctions

Double side light emission devices based on p-NiO/n-ZnO nanowire heterojunctions have been fabricated on indium tin oxide substrate by radio frequency magnetron sputtering combined with hydrothermal process. According to the energy band alignment, the detected broad visible and narrow ultraviolet electroluminescence arise from defect and band edge transitions in ZnO nanowires, respectively. The unique property of the double side emission is due to the nature of the large band gap of NiO film. It provides a good opportunity for the emission of a light emitting device with different colors on the top and back sides, simultaneously.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced photocatalytic activity of surface disorder-engineered CaTiO3

Highlights: • Surface disorder of CaTiO{sub 3} nanocuboids was created by NaBH{sub 4} treatment. • Surface disorder-engineered CaTiO{sub 3} exhibits more efficient electron-hole separation. • Surface disorder-engineered CaTiO{sub 3} exhibits enhanced photocatalytic activity. • The photocatalytic mechanism was investigated and discussed. - Abstract: In this work, we attempted to create surface disorder on CaTiO{sub 3} nanocuboids by NaBH{sub 4} treatment with the aim of enhancing the photocatalytic activity. The samples were systematically investigated by XRD, SEM, TEM, BET, XPS, UV–vis DRS, PL, EIS and photocurrent response. The photocatalytic activity of the samples were evaluated by degrading RhB under irradiation of simulated sunlight, UV and visible light. It is demonstrated that NaBH{sub 4}-treated CaTiO{sub 3} samples exhibit an obviously enhanced photocatalytic activity. In particular, the sample treated at 0.1 M NaBH{sub 4} solution has a photocatalytic activity ca. 2.0 times higher than pristine CaTiO{sub 3}. This is ascribed to the fact that the created surface disorder facilitates the separation of photogenerated electron-hole pairs, and thus more photogenerated holes are able to participate in the photocatalytic reactions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fourier Spectroscopy as a Method of Investigation of Photoelectric Properties of Organic Systems

A new method of investigation of photoelectric properties of layered thin-film structures based on broadband Fourier spectroscopy exhibiting a harmonically modulated optical delay is proposed. In contrast to traditional approaches to study photoelectric properties, which are based on application of dispersive spectral devices, the proposed method allows not only simultaneously covering the ultraviolet, visible, and infrared spectral ranges, while demonstrating a wide dynamic range and high spectral resolution, but also easily varying low-frequency modulation of the action of light. The capabilities of the method are demonstrated using a polycrystalline organic heterostructure as an example. Its spectral sensitivity, speed, and specific detectivity are measured. A model and an equivalent electric circuit are proposed for explanation of the results of the measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SURFACE BRIGHTNESS PROFILES OF DWARF GALAXIES. I. PROFILES AND STATISTICS

Radial surface brightness profiles of spiral galaxies are classified into three types: (I) single exponential, or the light falls off with one exponential to a break before falling off (II) more steeply, or (III) less steeply. Profile breaks are also found in dwarf disks, but some dwarf Type IIs are flat or increasing out to a break before falling off. Here we re-examine the stellar disk profiles of 141 dwarfs: 96 dwarf irregulars (dIms), 26 Blue Compact Dwarfs (BCDs), and 19 Magellanic-type spirals (Sms). We fit single, double, or even triple exponential profiles in up to 11 passbands: GALEX FUV and NUV, ground-based UBVJHK and Hα, and Spitzer 3.6 and 4.5 μm. We find that more luminous galaxies have brighter centers, larger inner and outer scale lengths, and breaks at larger radii; dwarf trends with M{sub B} extend to spirals. However, the V-band break surface brightness is independent of break type, M{sub B} , and Hubble type. Dwarf Type II and III profiles fall off similarly beyond the breaks but have different interiors and IIs break ∼twice as far as IIIs. Outer Type II and III scale lengths may have weak trends with wavelength, but pure Type II inner scale lengths clearly decrease from the FUV to visible bands whereas Type III inner scale lengths increase with redder bands. This suggests the influence of different star formation histories on profile type, but nonetheless the break location is approximately the same in all passbands. Dwarfs continue trends between profile and Hubble types such that later-type galaxies have more Type II but fewer Type I and III profiles than early-type spirals. BCDs and Sms are over-represented as Types III and II, respectively, compared to dIms.

79 ASTRONOMY AND ASTROPHYSICS↗

One-dimensional organic photoconductive nanoribbons built on Zn-Schiff base complex

One-dimensional organic nanoribbons built on N-p-nitrophenylsalicylaldimine zinc complex were synthesized via a facile solvothermal route. The scanning electron microscope images revealed that the as-synthesized products were ribbon-like with width mainly of 300-600 nm, thickness of about 50 nm, and length of up to tens of micrometers. Fourier transform infrared spectrum was employed to characterize the structure. Ultraviolet-visible absorption and photoluminescence spectra showed that the products had good photoluminescent property and exhibited blue emission. The conductivity of a bundle of nanoribbons was also measured, which showed that the Schiff base zinc nanoribbons had good photoconductive property. This work might enrich the organic photoconductive materials and be applicable in light-controlled micro-devices or nano-devices in the future. - Graphical abstract: The Schiff base zinc nanoribbons nanowires exhibited good photoresponse under an incandescent lamp, which indicated their potential application as organic semiconductive or photoconductive nanodevices in the future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface plasmon resonances behavior in visible light of non-metal perovskite oxides AgNbO{sub 3}

We investigate the surface plasmon resonances (SPRs) behavior of silver niobate (AgNbO{sub 3}) experimentally and theoretically. Result shows that the localized SPRs (LSPRs) of AgNbO{sub 3} combining with its interband transitions enlarge the absorption band across the whole ultraviolet-visible range. The LSPRs behavior in visible-light is mainly ascribed to the metal-like state of silver ion and self-assembled microstructures of AgNbO{sub 3} microcrystal. The ab initio density functional theory calculations are carried out to obtain the further insight of the SPRs behaviors. Theoretical study indicates that the Ag atoms are weakly bound in the perovskite structure, leading to a metal-like state, which was the key factor to SPRs behavior of AgNbO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗