Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “UV”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Temporal laser pulse shaping for RF photocathode guns : the cheap and easy way using UV birefringent crystals.

We report experimental investigations into a new technique for achieving temporal laser pulse shaping for RF photocathode gun applications using inexpensive UV birefringent crystals. Exploiting the group velocity mismatch between the two different polarizations of a birefringent crystal, a stack of UV pulses can be assembled into the desired temporal pulse shape. The scheme is capable of generating a variety of temporal pulse shapes including: (i) flat-top pulses with fast rise-time and variable pulse duration. (ii) microbunch trains, and (iii) ramped pulse generation. We will consider two applications for beam generation at the Argonne Wakefield Accelerator (AWA) including a flat-top laser pulse for low emittance production and matched bunch length for enhanced transformer ratio production. Streak camera measurements of the temporal profiles generated with a 2-crystal set and a 4-crystal set are presented.

43 PARTICLE ACCELERATORS↗

Metal-semiconductor-metal structured p-i-n GaN/AlGaN ultrafast detectors for deep-UV photodetection

We report the productive outcome of the design, fabrication, and testing of a new class of GaN/AlGaN-based ultrafast, sensitive photodiodes for deep-UV solar blind photodetection. Pt was employed as the interdigitated metal electrode to establish that while a Schottky contact was formed at the metal/semiconductor heterojunction, it was the quantum wells in the p-i-n vertical structure that produced the diode characteristics of the detectors. The metal–semiconductor–metal design retained its ultrafast property as expected in the p-i-n structure because the spacing between the interdigitated fingers was asymmetrically implemented to optimize the photogenerated carriers’ transit time from the quantum well to the external circuitry. Also, the vertical p-i-n structure provided its renowned efficient photocarrier generation, which was significantly enhanced by the delta quantum well architecture of the vertical epitaxial structure. The active area of the device was 300 μm × 300 μm with 5-μm finger width, and asymmetric electrode spacing of 2 μm, 3 μm, and 5 μm. Here, the best device had peak responsivity of 3.5 A/W under 262-nm illumination with full width half maximum of 337.2-ps and 37.5-ps rise times when biased with 20 V.

efficient↗

Self-diagnosis of model suitability for continuous measurements of stream-dissolved organic carbon derived from in situ UV–visible spectroscopy

Application of high-frequency monitoring of dissolved organic carbon (DOC) is difficult in instances where training datasets are challenging to develop (e.g., remote locations) and the relationship between optical features and DOC concentration changes due to environmental or landscape shifts (e.g., climate or land-use change). We developed and compared three partial least squares (PLS) models using in situ water level measurements, conductivity, and UV–Vis spectral attenuation to predict DOC. Two site-specific models were developed using data from a hillslope-dominated forest or a low-relief wetland-pond-dominated stream catchment. The third model, using data from both sites, exhibited the best performance (DOC range = 4–15.5 mg C L −1 , mean = 8.38 mg C L −1 , training RMSE = 0.34 mg C L −1 , internal validation RMSE = 0.50 mg C L −1 , external validation RMSE = 2.43 mg C L −1 ). We further demonstrate using PLS model statistics to monitor performance and elucidate when and how models should be updated. These statistics, Hotelling's T 2 and squared prediction errors, are useful consistency checks for the predictions made and detect underlying inconsistencies that, if undetected, can reduce the robustness of DOC prediction. For example, via the T 2 statistic, we identified the summer–autumn transition as a period when DOC composition differed from what was represented in the training dataset. We also determined that elevated SUVA 254 values contributed to the overall bias observed in predictions made during the subsequent year as part of the external validation. This enabled the application of a bias correction that reduced the RMSE from 2.43 to 0.89 mg C L −1 . The method presented here could be applied to future monitoring programs enabling model updates to monitor DOC fluxes accurately from optical datasets (e.g., attenuance or fluorescence) in the face of developing datasets in remote locations or environmental change. In conclusion, implementation of this approach may also identify possible regime shifts or landscape and hydrologic change associated with climate and other environmental changes relevant to terrestrial to aquatic fluxes.

UV-VIS spectroscopy↗

Investigation on the AgPt and AgPd hybrid alloy nanoparticles (HANPs) for the hybrid MoS 2 /ZnO/HANP UV photodetector application

We report hybrid photodetectors made of two or more nanomaterial components can offer the high potential for advanced photodetection applications with enhanced light absorption, improved efficiency and structural tunability. A hybrid UV photodetector (PD) configuration incorporating the plasmonic hybrid alloy nanoparticles (HANP), ZnO quantum dots (QDs) and MoS 2 nanoflakes, namely MoS2/ZnO/HANP PD, is demonstrated. The optimized MoS 2 /ZnO/HANP PD exhibits a high photocurrent of 5.66 mA at 0.34 mW/mm 2 under 385 nm illumination with two orders of improvement from the bare ZnO, which is one of the highest photocurrents by the ZnO-based PDs. It also demonstrates high figure-of-merits with the responsivity of 14,523 mA/W, detectivity of 8.13 x 10 11 jones, and external quantum efficiency (EQE) of 4,680 %, outperforming most of the ZnO-based hybrid architectures. The enhanced photoresponse is primarily attributed to the significantly enhanced hot electron generation by the AgPd HANPs and photocarrier collection through the ZnO QD layer. MoS 2 nanoflakes also provide additional photon absorption sites and boost the photo-carrier transfer process. HANPs are grown by adapting a dual-step solid-state dewetting process (SSD) approach and the superiority of AgPd HANPs is confirmed by systematic investigation, FDTD simulation and comparison of AgPt and AgPd HANPs.

MoS2↗

Structural Dynamics in UV Curable Resins Resolved by In Situ 3D Printing X-ray Photon Correlation Spectroscopy

Additive manufacturing (AM) is a promising technique to rapidly produce polymeric materials into complex 3-dimensional (3D) geometries. While AM is widespread and relevant for a range of applications, implementation in industry has outpaced our fundamental understanding of polymer dynamics and structure development during the printing process. Characterization and quantification of such dynamics is necessary to optimize final material properties and design future materials and processes for 3D printing. Here, we utilize X-ray photon correlation spectroscopy (XPCS) to measure spatial and time-resolved, out-of-equilibrium dynamics during direct ink write (DIW) 3D printing. Specifically, we investigate the progression of structural dynamics in a dual cure (UV/thermal) nanocomposite during and directly after printing. As the filament is printed and cured in situ, the relaxation processes of the cross-linking network are measured through the dynamics of inorganic filler particles. The characteristic relaxation time of the dynamics is calculated through the intensity–intensity autocorrelation function g 2 and directly correlated to the printing process parameters, such as printhead velocity and UV light intensity. The time-resolved evolution of nanoscale dynamics follows a power-law dependence as the filament is cured. Additionally, bulk rheological characterizations reveal the macroscopic solidification of the resin, providing correlation of material properties across a wide range of length and time scales. Overall, the measurement of multiscale, out-of-equilibrium dynamics provides insight into the development of structure in polymer nanocomposite filaments during 3D printing and is used to further understand the influence of such parameters on the AM process.

36 MATERIALS SCIENCE↗

UV-Vis spectrophotometric determination of rare earth elements (REE) speciation at near-neutral to alkaline pH. Part I: m-cresol purple properties from 25-75 °C and Er hydrolysis

The speciation and mobility of rare earth elements (REE) strongly depends on pH which controls the formation of charged aqueous hydroxyl species. The latter potentially play an important role in controlling heavy REE adsorption on clay minerals in near-neutral to alkaline waters such as in regolith-hosted REE mineral deposits. However, accurate REE hydrolysis constants are needed for developing geochemical models that can predict the role of these charged species in natural systems. Here, we develop a robust experimental UV-Vis spectrophotometric method using m-cresol purple to determine in situ pH from 25 to 75 °C. This method is used to derive the average ligand number and hydrolysis constants of erbium (Er) at 25 °C in aqueous solutions with low ionic strength (≤ 0.001 mol/L) at pH from ~7 to 9.5 and in the presence of Er concentrations from 0 to 0.057 mM. The average ligand number ranges between 1 and 3 indicating that Er(OH) 2+ , Er(OH) 2 + and Er(OH) 3 0 control speciation in the experiments. The logarithm of the Er hydrolysis constants (log*β n ° , n= 1 to 3) derived at infinite dilution for the reaction Er 3+ + nH 2 O = Er(OH) n 3-n + nH + are: *β 1 ° = –7.22 ± 0.10, *β 2 ° = –14.52 ± 0.08, *β 3 ° = –23.24 ± 0.04. Implementation of these experimental data into a geochemical model indicates that the Er(OH) 2 + and Er(OH) 3 0 species are both stable in a much wider pH range than previously predicted. Consequently, the positively charged REE hydroxyl complexes can potentially control the fractionation of light vs. heavy REE via adsorption as observed in the formation of certain regolith-hosted REE deposits.

58 GEOSCIENCES↗

Ultrafast UV AlGaN Metal–Semiconductor–Metal Photodetector With a Response Time Below 25 ps

Here, aluminum-gallium-nitride photodetectors were successfully fabricated with micrometer-scale metal–semiconductor–metal structures and tested with ultrafast, UV laser pulses. The measurements were performed with single-shot oscilloscopes. Pulse-broadening effects caused by the measurement system were systematically evaluated and reduced to resolve the intrinsic response time of the detector. The best-performing devices showed a response time of below 25 ps and dark currents below 20 pA. The devices showed linear response with the bias voltage and the laser energy

42 ENGINEERING↗

Interdigitated electrode geometry variation and external quantum efficiency of GaN/AlGaN-based metal-semiconductor-metal UV photodetectors

Aluminum gallium-nitride (Al x Ga 1–x N)-based metal–semiconductor–metal (MSM) ultraviolet photodetectors photodetectors (PD’s) have been successfully designed and fabricated using conventional photolithography techniques and tested experimentally to study their spectral sensitivity across different Al content, x, with x varying from 0 to 0.3. (Al)GaN-based UV PD’s have wide and tunable direct band gaps. The ability to easily select the photodetected wavelength by simply varying the aluminum content of GaN thin film (Al x Ga 1–x N) is a significant advantage of these group III–V compounds. Typically, MSM PD’s grown on (Al)GaN thin films result in ultrafast photodetection because of their highly mobile carriers. These devices are limited by the carrier transit time due to the negligible capacitance presented by the interdigitated fingers. Various electrode geometries were fabricated to investigate the influence of metal contact shapes on the devices’ performance indices with emphasis on the response speed and bias-voltage–independent efficiency. Here, coupled with the independently measured Hall mobility and electric field, we computed the carrier transit time of the devices to be as short as 1.31 ps and the bias-voltage–independent external quantum efficiencies were as high as 70% at 60 V for n-doped and intrinsic devices when operated in the reverse bias regime. Here, (Al x )Ga 1–x N photodetectors were designed to explore spectral sensitivity by altering x from 0 to 0.3.

42 ENGINEERING↗

Ultraviolet (UV) Raman Spectroscopy Study of the Soret Effect in High-Pressure CO2-Water Solutions

Spatially resolved deep-UV Raman spectroscopy was applied to solutions of CO2 and H2O or D2O subject to a temperature gradient in a thermally regulated high-pressure concentric-tube Raman cell in an attempt to measure a Soret effect in the vicinity of the critical point of CO2. Although Raman spectra of solutions of CO2 dissolved in D2O, at 10 MPa and temperatures near the critical point of CO2, had adequate signal-to-noise and spatial resolution to observe a Soret effect with a Soret coefficient with magnitude |ST| > 0.03, no evidence for an effect of this size was obtained for applied temperature gradients up to 19 C. In contrast, the concentration of CO2 dissolved in H2O was shown to vary significantly across the temperature gradient when excess CO2 was present, but the results could be explained simply by the variation in CO2 solubility over the temperature range and not to kinetic factors. For mixtures of D2O dissolved in scCO2 at 10 MPa and temperatures close to the critical point of CO2, the Raman peaks for D2O were too weak to measure with confidence even at the limit of D2O solubility.

61 RADIATION PROTECTION AND DOSIMETRY↗

Conformational Control of DNA Origami by DNA Oligomers, Intercalators and UV Light

DNA origami has garnered great attention due to its excellent programmability and precision. It offers a powerful means to create complex nanostructures which may not be possible by other methods. The macromolecular structures may be used as static templates for arranging proteins and other molecules. They are also capable of undergoing structural transformation in response to external signals, which may be exploited for sensing and actuation at the nanoscale. Such on-demand reconfigurations are executed mostly by DNA oligomers through base-pairing and/or strand displacement, demonstrating drastic shape changes between two different states, for example, open and close. Recent studies have developed new mechanisms to modulate the origami conformation in a controllable, progressive manner. Here we present several methods for conformational control of DNA origami nanostructures including chemical adducts and UV light as well as widely applied DNA oligomers. The detailed methods should be useful for beginners in the field of DNA nanotechnology.

59 BASIC BIOLOGICAL SCIENCES↗

Delta-doped imagers for UV and EUV applications

In this paper we will discuss performance of delta-doped CCDs in UV and EUV, our in-house thinning capability, bonding approaches for producing flat focal plane arrays, and in-house capabilities of directly applied antireflection coatings.

UV EUV delta-doped imagers↗

Formation of Nucleobases from the UV Irradiation of Pyrimidine in Astrophysical Ice Analogs

Nucleobases are the informational subunits of DNA and RNA. They consist of Nheterocycles that belong to either the pyrimidine-base group (uracil, cytosine, and thymine) or the purinebase group (adenine and guanine). Several nucleobases, mostly purine bases, have been detected in meteorites [1-3], with isotopic signatures consistent with an extraterrestrial origin [4]. Uracil is the only pyrimidine-base compound formally reported in meteorites [2], though the presence of cytosine cannot be ruled out [5,6]. However, the actual process by which the uracil was made and the reasons for the non-detection of thymine in meteorites have yet to be fully explained. Although no N-heterocycles have ever been observed in the ISM [7,8], the positions of the 6.2-μm interstellar emission features suggest a population of such molecules is likely to be present [9]. In this work we study the formation of pyrimidine-based molecules, including the three nucleobases uracil, cytosine, and thymine from the ultraviolet (UV) irradiation of pyrimidine in ices consisting of several combinations of H(sub2)O, NH(sub3), CH(sub3)OH, and CH(sub4) at low temperature, in order to simulate the astrophysical conditions under which prebiotic species may be formed in the interstellar medium, in the protosolar nebula, and on icy bodies of the Solar System.

UV Irradiation↗

Near UV Aerosol Group Report

2012-13 Report of research on aerosol and cloud remote sensing using UV observations. The document was presented at the 2013 AEROCENTER Annual Meeting held at the GSFC Visitors Center, May 31, 2013. The Organizers of the meeting are posting the talks to the public Aerocentr website, after the meeting.

VIS MFSR Measurements↗

Sugar and Sugar Derivatives in Residues Produced from the UV Irradiation of Astrophysical Ice Analogs

A large variety and number of organic compounds of prebiotic interest are known to be present in carbonaceous chondrites. Among them, one sugar (dihydroxyacetone) as well as several sugar acids, sugar alcohols, and other sugar derivatives have been reported in the Murchison and Murray meteorites. Their presence, along with amino acids, amphiphiles, and nucleobases strongly suggests that molecules essential to life can form abiotically under astrophysical conditions. This hypothesis is supported by laboratory studies on the formation of complex organic molecules from the ultraviolet (UV) irradiation of simulated astrophysical ice mixtures consisting of H2O, CO, CO2, CH3OH, CH4, NH3, etc., at low temperature. In the past 15 years, these studies have shown that the organic residues recovered at room temperature contain amino acids, amphiphiles, nucleobases, as well as other complex organics. However, no systematic search for the presence of sugars and sugar derivatives in laboratory residues have been reported to date, despite the fact that those compounds are of primary prebiotic significance. Indeed, only small (up to 3 carbon atoms) sugar derivatives including glycerol and glyceric acid have been detected in residues so far.

Ice Irradiation↗

Search for Sugars and Related Compounds in Residues Produced from the UV Irradiation of Astrophysical Ice Analogs

A large variety of organics of biological and prebiotic interests have been detected in meteorites, including one sugar and several sugar acids and sugar alcohols [1]. The presence of these compounds in meteorites, along with amino acids, amphiphiles, and nucleobases [2-4], indicates that molecules essential to life can be formed abiotically under astrophysical conditions. This hypothesis is supported by extensive laboratory studies involving the formation of complex organic molecules from the ultraviolet (UV) irradiation of astrophysical ice analogs (H2O, CO, CO2, CH3OH, CH4, NH3, etc.). These studies show that the organic residues recovered at room temperature contain many of the same compounds as those found in meteorites[3,58]. However, to the best of our knowledge, no systematic search for the presence of sugars and sugar derivatives in such laboratory residues have been reported to date. Only a limited number of small (greater than 4 C atoms) sugar-related compounds such as glycerol and glyceric acid [9], and more recently small (2-4 C atoms) aldehydes [10] have been detected in residues.

Astrophysics↗