SEARCH · Engineering Papers

Results for “Transient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Transient fading X-ray emission detected during the optical rise of a tidal disruption event

ABSTRACT We report on the SRG/eROSITA detection of ultra-soft ($kT=47^{+5}_{-5}$ eV) X-ray emission (LX =$2.5^{+0.6}_{-0.5} \times 10^{43}$ erg s−1) from the tidal disruption event (TDE) candidate AT 2022dsb ∼14 d before peak optical brightness. As the optical luminosity increases after the eROSITA detection, then the 0.2–2 keV observed flux decays, decreasing by a factor of ∼39 over the 19 d after the initial X-ray detection. Multi-epoch optical spectroscopic follow-up observations reveal transient broad Balmer emission lines and a broad He ii 4686 Å emission complex with respect to the pre-outburst spectrum. Despite the early drop in the observed X-ray flux, the He ii 4686 Å complex is still detected for ∼40 d after the optical peak, suggesting the persistence of an obscured hard ionizing source in the system. Three outflow signatures are also detected at early times: (i) blueshifted H α emission lines in a pre-peak optical spectrum, (ii) transient radio emission, and (iii) blueshifted Ly α absorption lines. The joint evolution of this early-time X-ray emission, the He ii 4686 Å complex, and these outflow signatures suggests that the X-ray emitting disc (formed promptly in this TDE) is still present after optical peak, but may have been enshrouded by optically thick debris, leading to the X-ray faintness in the months after the disruption. If the observed early-time properties in this TDE are not unique to this system, then other TDEs may also be X-ray bright at early times and become X-ray faint upon being veiled by debris launched shortly after the onset of circularization.

Malyali, A. (ORCID:0000000288514019)↗

DOE OSTI2025

Optical evolution of AT 2024wpp: the high-velocity outflows in Cow-like transients are consistent with high spherical symmetry

ABSTRACT We present the analysis of optical/near-infrared (NIR) data and host galaxy properties of a bright, extremely rapidly evolving transient, AT 2024wpp, which resembles the enigmatic AT 2018cow. AT 2024wpp rose to a peak brightness of $c=-21.9$ mag in 4.3 d and remained above the half-maximum brightness for only 6.7 d. The blackbody fits to the photometry show that the event remained persistently hot ($T\gtrsim 20\, 000$ K) with a rapidly receding photosphere ($v\sim 11\, 500$ km s$^{-1}$), similarly to AT 2018cow albeit with a several times larger photosphere. $JH$ photometry reveals an NIR excess over the thermal emission at $\sim +20$ d, indicating a presence of an additional component. The spectra are consistent with blackbody emission throughout our spectral sequence ending at $+21.9$ d, showing a tentative, very broad emission feature at $\sim 5500$ Å – implying that the optical photosphere is likely within a near-relativistic outflow. Furthermore, reports of strong X-ray and radio emission cement the nature of AT 2024wpp as a likely Cow-like transient. AT 2024wpp is the second event of the class with optical polarimetry. Our $BVRI$ observations obtained from $+6.1$ to $+14.4$ d show a low polarization of $P\lesssim 0.5$ per cent across all bands, similar to AT 2018cow that was consistent with $P\sim 0$ per cent during the same outflow-driven phase. In the absence of evidence for a preferential viewing angle, it is unlikely that both events would have shown low polarization in the case that their photospheres were aspherical. As such, we conclude that the near-relativistic outflows launched in these events are likely highly spherical, but polarimetric observations of further events are crucial to constrain their ejecta geometry and stratification in detail.

Pursiainen, M.↗

DOE OSTI2020

Photometric classification of Hyper Suprime-Cam transients using machine learning

Abstract The advancement of technology has resulted in a rapid increase in supernova (SN) discoveries. The Subaru/Hyper Suprime-Cam (HSC) transient survey, conducted from fall 2016 through spring 2017, yielded 1824 SN candidates. This gave rise to the need for fast type classification for spectroscopic follow-up and prompted us to develop a machine learning algorithm using a deep neural network with highway layers. This algorithm is trained by actual observed cadence and filter combinations such that we can directly input the observed data array without any interpretation. We tested our model with a dataset from the LSST classification challenge (Deep Drilling Field). Our classifier scores an area under the curve (AUC) of 0.996 for binary classification (SN Ia or non-SN Ia) and 95.3% accuracy for three-class classification (SN Ia, SN Ibc, or SN II). Application of our binary classification to HSC transient data yields an AUC score of 0.925. With two weeks of HSC data since the first detection, this classifier achieves 78.1% accuracy for binary classification, and the accuracy increases to 84.2% with the full dataset. This paper discusses the potential use of machine learning for SN type classification purposes.

Takahashi, Ichiro↗

DOE OSTI2024

On the nature of apparent transient sources on the National Geographic Society–Palomar Observatory Sky Survey glass copy plates

Abstract We examine critically recent claims for the presence of above-atmosphere optical transients in publicly available digitized scans of Schmidt telescope photographic plate material derived from the National Geographic Society–Palomar Observatory Sky Survey. We employ the publicly available SuperCOSMOS Sky Survey catalogues to examine statistically the morphology of the sources. We develop a simple, objective, and automated image classification scheme based on a random forest decision tree classifier. We find that the putative transients are likely to be spurious artefacts of the photographic emulsion. We suggest a possible cause of the appearance of these images as resulting from the copying procedure employed to disseminate glass copy survey atlas sets in the era before large-scale digitization programmes.

Hambly, N. C. (ORCID:0000000299019064)↗

DOE OSTI2020

Simulating transient heat transfer in graphene at finite Knudsen number via the Boltzmann transport equation and molecular dynamics

The phonon Boltzmann transport equation (BTE) with the relaxation time approximation (RTA) scattering model is used to calculate transient temperature profiles in graphene, and the results are compared to analogous molecular dynamics (MD) simulations. For the BTE calculations, the phonon dispersion relation and frequency-dependent scattering rates are obtained from a combination of MD data and semi-empirical power-law expressions for the normal and Umklapp phonon lifetimes. The dimensions and initial temperature conditions of graphene are varied to study the size and temperature dependence of thermal transport physics at the mesoscopic scale. Good quantitative agreement to within 5% is found between the BTE and MD results, over a wide range of temperatures and lengthscales of the temperature variation in the graphene sheet. Small differences are attributed to the inaccuracy of the RTA as applied to graphene, and to neglecting four-phonon scattering in the BTE simulations. The present results may further understanding in applications such as the transient heating of nanoelectronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Transient magnetoelastic coupling in CrSBr

Recent research has revealed remarkable properties of the two-dimensional (2D) van der Waals layered crystal CrSBr, which is both a semiconductor and an A-type antiferromagnet. Here, in this study, we show the role of strong magnetoelastic coupling in the generation and propagation of coherent magnons in CrSBr. Time- and spatially resolved magneto-optical Kerr effect microscopy reveals two time-varying transient strain fields induced by out-of-plane transverse and in-plane longitudinal lattice displacements. These transient strain fields launch coherent wavepackets of magnons, optical and acoustic, at 24.6 ± 0.8 and 33.4 ± 0.5GHz, respectively. These findings suggest mechanisms for controlling and manipulating coherent magnons from distinct magnetoelastic couplings in this 2D van der Waals magnetic semiconductor.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Disentangling transient charge order from structural dynamics contributions during coherent atomic motion studied by ultrafast resonant x-ray diffraction [Disentangling charge and structural contributions during coherent atomic motions studied by ultrafast resonant x-ray diffraction]

We report on the ultrafast dynamics of charge order and structural response during the photoinduced suppression of charge and orbital order in a mixed-valence manganite. Employing femtosecond time-resolved resonant x-ray diffraction below and at the Mn K absorption edge, we present a method to disentangle the transient charge order and structural dynamics in thin films of Pr 0.5 Ca 0.5 MnO 3 . Based on the static resonant scattering spectra, we extract the dispersion correction of charge-ordered Mn 3+ and Mn 4+ ions, allowing us to separate the transient contributions of purely charge order from structural contributions to the scattering amplitude after optical excitation. Furthermore, our finding of a coherent structural mode at around 2.3THz, which primarily modulates the lattice but does not strongly affect the charge order, supports the picture of the charge order being the driving force of the combined charge, orbital, and structural transition.

36 MATERIALS SCIENCE↗

DOE OSTI2017

Cooling of neutron stars in soft x-ray transients

Thermal states of neutron stars in soft x-ray transients (SXRTs) are thought to be determined by “deep crustal heating” in the accreted matter that drives the quiescent luminosity and cooling via emission of photons and neutrinos from the interior. In this work, we assume a global thermal steady state of the transient system and calculate the heating curves (quiescent surface luminosity as a function of mean accretion rate) predicted from theoretical models, taking into account variations in the equations of state, superfluidity gaps, thickness of the light element layer, and a phenomenological description of the direct Urca threshold. We further provide a statistical analysis on the uncertainties in these parameters, and compare the overall results with observations of several SXRTs, in particular the two sources containing the coldest (SAX J1808.4-3658) and the hottest (Aql X-1) neutron stars. Interpretation of the observational data indicates that the direct Urca process is required for the most massive stars and also suggests small superfluid gaps.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Slow dynamics in a single bead with mechanical conditioning and transient heating

The contact stiffness of an aluminum bead confined between two slabs diminishes upon mechanical conditioning, and then recovers like log(t) after the conditioning ceases. Here that structure is evaluated for its response to transient heating and cooling, with and without accompanying conditioning vibrations. It is found that, under heating or cooling alone, stiffness changes are mostly consistent with temperature dependent material moduli; there is little or no slow dynamics. Hybrid tests in which vibration conditioning is followed by heating or cooling lead to recoveries that begin like log(t) and then become more complex. On subtracting the known response to heating or cooling alone we discern the influence of higher or lower temperatures on slow dynamic recovery from vibrations. It is found that heating accelerates the initial log(t) recovery, but by an amount more than predicted by an Arrhenius model of thermally activated barrier penetrations. Furthermore, transient cooling has no discernable effect, in contrast to the Arrhenius prediction that it slows recovery.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Transient dynamics in drop impact on a superheated surface

When a drop impinges on a superheated surface, a Leidenfrost vapor layer forms between the drop and the surface. Transient dynamics of the layer can play a critical role for cooling in power plants but is not fully understood. Here we successfully visualize transient dynamics of the layer using ultrafast X-ray imaging. We reveal that a vapor disk with a homogeneous thickness, developed during drop impact, grows in thickness following the Fourier law. At a certain thickness (12 ± 2 μm in this study) of the vapor disk, ripples generate at its periphery due to capillary waves, resulting in significant enhancement of drop vaporization.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Anisotropic X-Ray Scattering of Transiently Oriented Water

We study the structural dynamics of liquid water by time-resolved anisotropic x-ray scattering under the optical Kerr effect condition. In this way, we can separate the anisotropic scattering decay of 160 fs from the delayed temperature increase of ~ 0.1 K occurring at 1 ps and quantify transient changes in the O-O pair distribution function. Polarizable molecular dynamics simulations reproduce well the experiment, indicating transient alignment of molecules along the electric field, which shortens the nearest-neighbor distances. In addition, analysis of the simulated water local structure provides evidence that two hypothesized fluctuating water configurations exhibit different polarizability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Dual Mechanism for Transient Capacitance Anomaly in Improper Ferroelectrics

Negative capacitance (NC) effects in ferroelectrics can potentially break fundamental limits of power dissipation known as “Boltzmann tyranny.” However, the origin of transient NC of ferroelectrics, which is attributed to two different mechanisms involving free-energy landscape and nucleation, is under intense debate. Here, we report the coexistence of transient NC and an S-shaped anomaly during the switching of ferroelectric hexagonal ferrites capacitor in an RC circuit. The early-stage NC arises from the nucleation process, while the late-stage S-shaped anomaly corresponds to a nascent NC associated with the free-energy landscape. The entire waveform can be reproduced using a hybrid model that simultaneously incorporates these two mechanisms. These results highlight the multivariable free-energy landscape of hexagonal ferrites that enables an abrupt change of the internal field and demonstrate that the two mechanisms are not mutually exclusive, resolving the long-standing debate. In conclusion, the behavior of the S-shaped anomaly also provides a pathway to extract parameters of free-energy landscape and switching dynamics.

Capacitance↗

DOE OSTI2022

Transient electron scavengers modulate carrier density at a polar/nonpolar perovskite oxide heterojunction

Here, we show how transient electron scavengers can be utilized to control the carrier concentration at polar/non-polar perovskite interfaces. By combining quantitative synchrotron x-ray-based interface structure determination with ab initio modeling, we demonstrate that Nd vacancy formation and the resulting formation of Nd adatoms, stabilized by oxygen scavengers at the growth front, can quantitatively account for the decreased carrier concentration at the SrTiO 3 /n NdTiO 3 /SrTiO 3 (001) heterojunction for n = 1 unit cell. This study yields new insights into growth mechanisms and the effect of transient species and defects on the electronic properties of oxide heterojunctions.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Vanishing dynamic strength measured in a transient high-pressure phase of tin

This work reports two independent experimental estimations of the dynamic strength of the body-centered tetragonal (bct) 𝛾 phase of tin, which occurs at pressures above about 9 GPa and transforms promptly back to the ambient 𝛽 phase upon pressure release. Measuring strength in such a transient high-pressure phase is challenging. One measurement used free-surface Richtmyer-Meshkov instabilities generated with gas gun impact. Another set of measurements used ramp-release loading in a pulsed-power facility. Strength estimations came from comparison to simulations using a comprehensive multiphase modeling framework that includes equation of state, shear moduli, and strength separately for each phase, and treats mixed-phase regions. Both experimental methods found the 𝛾-phase strength to be very low, within experimental uncertainty of zero. The existing literature on other materials, by contrast, almost universally reports higher strength in transient high-pressure phases compared with ambient phases. Recent Molecular-Dynamics simulations on tin in the literature showed almost zero deviatoric strength during a deformation-induced bct → bct transformation in which one of the 𝛾-phase 𝑎 axes “flips” to the 𝑐 axis. This reorientation currently provides the most plausible explanation for the low observed strength in 𝛾-phase tin.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Transient thermal stress wave and vibrational analyses of a thin diamond crystal for X-ray free-electron lasers under high-repetition-rate operation

High-brightness X-ray free-electron lasers (FELs) are perceived as fourth-generation light sources providing unprecedented capabilities for frontier scientific researches in many fields. Thin crystals are important to generate coherent seeds in the self-seeding configuration, provide precise spectral measurements, and split X-ray FEL pulses, etc . In all of these applications a high-intensity X-ray FEL pulse impinges on the thin crystal and deposits a certain amount of heat load, potentially impairing the performance. In the present paper, transient thermal stress wave and vibrational analyses as well as transient thermal analysis are carried out to address the thermomechanical issues for thin diamond crystals, especially under high-repetition-rate operation of an X-ray FEL. The material properties at elevated temperatures are considered. It is shown that, for a typical FEL pulse depositing tens of microjoules energy over a spot of tens of micrometers in radius, the stress wave emission is completed on the tens of nanoseconds scale. The amount of kinetic energy converted from a FEL pulse can reach up to ~10 nJ depending on the layer thickness. Natural frequencies of a diamond plate are also computed. The potential vibrational amplitude is estimated as a function of frequency. Here, due to the decreasing heat conductivity with increasing temperature, a runaway temperature rise is predicted for high repetition rates where the temperature rises abruptly after ratcheting up to a point of trivial heat damping rate relative to heat deposition rate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2022

A Universal Controller for Grid-Forming Inverters in Microgrid during Islanding for Low Transient Current

This paper presents a universal controller to reduce the transient current during islanding of microgrid. In the proposed universal controller, two sets of semi-parallel paths are formed, where one set produces voltage and phase-angle references for the grid-following (GFL) mode, and the other set produces the voltage and phase-angle references for the grid-forming (GFM) mode of operation for the inverters. Herein, the controller enables an inverter to universally operate in GFL and GFM mode, whereas, only one set of voltage and phase-angle reference is engaged for PWM signal generation. When the microgrid is disconnected from the grid, the universal controller switches the voltage and phase-angle references from GFL to GFM mode. The proposed controller ensures lower transient current by keeping the two sets of semi-parallel paths synchronized throughout the operation of the inverter and enabling seamless transition between the modes. The proposed controller is verified through hardware experiments under different scenarios in a laboratory scale microgrid for inverters transitioning from GFL to GFM mode after islanding.

Sadeque, Fahmid↗

DOE OSTI2021

Electromagnetic Transient Simulation Algorithms for Evaluation of Large-Scale Extreme Fast Charging Systems (Distribution Grid Models)

The distribution and transmission grids are observing an increased penetration of power electronics in loads and generations. For example, there is increasing interest in integrating in extreme fast charging (XFC) systems for fast charging of electrical vehicles. As these systems are integrated, developing high-fidelity electromagnetic transient model of XFC systems in distribution grids and evaluating their interactions with the power grid would be of significant interest. This model will be utilized for design of XFC systems, to identify upgrades in distribution and/or transmission grids, for planning purposes by transmission planners or operators or owners, among others. It can also be utilized in operations for improved reliable performance of the grid and/or XFC station. The challenge with simulating these models is the high computational complexity introduced by the large number of states present in the system and the time-step needed to simulate the system. In this paper, advanced simulations algorithms are applied to reduce the computational complexity of simulating large-scale XFC systems. The algorithms include numerical stiffness-based segregation, time constant-based segregation, clustering and aggregation on differential algebraic equations (DAEs), and multi-order integration approaches. While the first three algorithms split the matrix that needs to be inverted from a large matrix to much smaller matrices, the final algorithm reduces the computational burden of applying higher-order integration approaches in the complete system. The comparison made in the previous sentence is with respect to use of homogeneous integration approaches used in conventional electromagnetic transient simulators like power systems computer aided design (PSCAD). The approaches mentioned here have resulted in speed-up of 36x in the simulation of a single distribution system with 15 XFCs.

Debnath, Suman↗

DOE OSTI2024

Transient Stability Analysis of Direct Droop-Controlled Grid-Forming Inverter with Current Clipping as Current Limiting Control

This paper investigates the transient stability of the direct droop-controlled grid-forming (GFM) inverter which employs the current clipping-based approach for overcurrent limitation. An equivalent circuit model of the direct-droop GFM inverter with current clipping is developed for this purpose. It is shown that during overcurrent conditions, the GFM inverter with current clipping acts as a voltage source with a virtual resistance behind the inverter filters. To compute the parameters of this virtual resistance an analytical expression is given in the paper. Then utilizing the developed circuit, a criteria to exit current limiting during post-fault conditions is given. The developed analytical approaches are then validated through electromagnetic transient (EMT) simulation results in PSCAD software and finally concluding remarks are drawn.

Mohiuddin, Sheik Mohammad↗