Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thrusters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

A 5000-hour test of a grid-translation beam-deflection system for a 5-cm diameter Kaufman thruster

A grid-translation type beam deflection system was tested on a 5-cm diameter mercury ion thruster for 5000 hours at a thrust level of about 0.36 mlb. During the first 2000 hours the beam was vectored 10 degrees in one direction. No erosion damage attributable to beam deflection was detected. Results indicate a possible lifetime of 15,000 to 20,000 hours. An optimized neutralizer position was used which eliminated the sputter erosion groove observed on the SERT 2 thrusters.

Lathem, W. C.↗
NASA NTRS1973

Magnetic flux density environment of several electron-bombardment ion thrusters

Measurements of the external magnetic field of several electron-bombardment mercury ion thrusters were made using a single axis fluxgate magnetometer. The axial dipole moment accounted for most of the external field. In addition, residual fields from an electromagnet thruster were approximately 20 percent of the initial field. Simple degaussing of the axial magnets reduced the residual fields to 1 to 2 percent of the initial field.

Danilowicz, R. L.↗
NASA NTRS1973

A 9700-hour durability test of a five centimeter diameter ion thruster

A modified Hughes SIT-5 thruster was life-tested at the Lewis Research Center. The final 2700 hours of the test are described with a charted history of thruster operating parameters and off-normal events. Performance and operating characteristics were nearly constant throughout the test except for neutralizer heater power requirements and accelerator drain current. A post-shutdown inspection revealed sputter erosion of ion chamber components and component flaking of sputtered metal. Several flakes caused beamlet divergence and anomalous grid erosion, causing the test to be terminated. All sputter erosion sources were identified.

Nakanishi, S.↗
NASA NTRS1973

Performance of 30-cm ion thrusters with dished accelerator grids

Thirteen sets of dished accelerator grids were treated on five different 30 cm diameter bombardment thrusters to evaluate the effects of grid geometry variations on thruster discharge chamber performance. The dished grid parameters varied were: grid-to-grid spacing, screen and accelerator grid hole diameter, screen and accelerator open area fraction, compensation for beam divergence losses, and accelerator grid thickness. The effects on discharge chamber performance of main magnetic field changes, magnetic baffle current, cathode pole piece length and cathode position were also investigated.

Rawlin, V. K.↗
NASA NTRS1973

Investigation of mercury thruster isolators

Mercury ion thruster isolator lifetime tests were performed using different isolator materials and geometries. Tests were performed with and without the flow of mercury through the isolators in an oil diffusion pumped vacuum facility and cryogenically pumped bell jar. The onset of leakage current in isolators occurred in time intervals ranging from a few hours to many hundreds of hours. In all cases, surface contamination was responsible for the onset of leakage current and subsequent isolator failure. Rate of increase of leakage current and the leakage current level increased approximately exponentially with isolator temperature. Careful attention to shielding techniques and the elimination of sources of metal oxides appear to have eliminated isolator failures as a thruster life limiting mechanism.

Mantenieks, M. A.↗
NASA NTRS1973

Demonstration of a pulsing liquid hydrogen/liquid oxygen thruster

Successful operation of a pulsing liquid hydrogen/liquid oxygen attitude control propulsion system thruster (1250 lb sub f) at cryogenic inlet conditions while maintaining high specific impulse and low impulse bit capability was demonstrated. Significant technical advances and departures from conventional injector design practices were necessary in order to achieve an operable thruster. These advancements were achieved through extensive analyses of heat transfer and injector manifold priming that established the baseline feasibility for an actual hardware design. The primary subject of this paper is the result of experimental evaluation of the 45 R hydrogen inlet temperature injector concept. The test matrix consisted of 66 hot firing tests in a heat sink thrust chamber.

Herr, P. N.↗
NASA NTRS1973

On the Design and Test of a Liquid Injection Electric Thruster

A liquid injection electric thruster (LINJET) was designed and tested. The results of the tests were very encouraging with thruster performance levels well in excess of design goals. Supporting activities to the engine design and test included a five-million pulse life test on the main capacitor, a 46-million pulse test on the trigger electronics, design and fabrication of a zero resistance torque connector for use with the torsional pendulum thrust stand, design and fabrication of a logic box for control of engine firing, and a physical and chemical properties characterization of the perfluorocarbon propellant. While the results were encouraging, testing was limited, as many problems existed with the design. The most significant problem was involved with excessive propellant flow which contributed to false triggering and shorting. Low power active thermal control of the propellant storage cavity, coupled with a re-evaluation of the injection ring pore size and area exposed to the main capacitor discharge are areas that should be investigated should this design be carried forward.

Jones, T. A.↗
NASA NTRS1974

Thermodynamic analysis of an axial-flow laser-powered thruster

A one-dimensional model of a laser-powered thruster is analyzed. The model consists of two flow regions: a laser-heated region and a coaxial region outside the laser region. Different bulk velocities and temperatures are assigned for each region, and a common pressure is assigned for both regions. The one-dimensional inviscid flow equations are solved for each region with the same initial conditions. The results indicate that in order to prevent choked flow while increasing the anthalpy of the inlet gas by a factor of 10, the initial Mach number must be less than 0.14. For hydrogen gas seeded with 10 percent tungsten and entering the thruster tube at 10 atm and 300 K and a laser beam one-half the area of the tube, a tube length between 20 and 50 cm is required to vaporize the particles.

Kascak, A. F.↗
NASA NTRS1974

Study of monopropellants for electrothermal thrusters. Evaluation test program task summary report

An electrothermal thruster designed for operation with MIL-grade hydrazine is suitable for operation with propellants having lower freezing points. These propellants are 76% hydrazine - 24% hydrazine azide, Aerozine-50, 50% hydrazine - 50% monomethylydrazine, and a TRW-formulated mixture of 35% hydrazine - 50% monomethylhydrane - 15% ammonia. A steady-state specific impulse of 200 sec was exceeded by all propellants. A pulse-mode value of 175 sec specific impulse was exceeded by the azide blend for pulse widths greater than 50 ms and was met by the carbonaceous propellants for pulse widths greater than 100 ms. Longer residence times were required for the carbonaceous propellants; the original thruster design was modified by increasing the characteristic chamber length and density of screen packing. A substantial amount of thermal energy must be supplied to initiate decomposition of propellants containing unsymmetrical-dimethylhydrazine and monomethylhydrazine. The rate controlling factor appeared to be the endothermic removal of methyl radicals.

Kuenzly, J. D.↗
NASA NTRS1973

Control of a 30 cm diameter mercury bombardment thruster

Increased thruster performance has made closed-loop automatic control more difficult than previously. Specifically, high perveance optics tend to make reliable recycling more difficult. Control logic functions were established for three automatic modes of operation of a 30-cm thruster using a power conditioner console with flight-like characteristics. The three modes provide (1) automatic startup to reach thermal stability, (2) steady-state closed-loop control, and (3) the reliable recycling of the high voltages following an arc breakdown to reestablish normal operation. Power supply impedance characteristics necessary for stable operation and the effect of the magnetic baffle on the reliable recycling was studied.

Terdan, F. F.↗
NASA NTRS1973

Investigation of mercury thruster isolators

Mercury ion thruster isolator lifetime tests were performed using different isolator materials and geometries. Tests were performed with and without the flow of mercury through the isolators in an oil diffusion pumped vacuum facility and cryogenically pumped bell jar. The onset of leakage current in isolators tested occurred in time intervals ranging from a few hours to many hundreds of hours. In all cases, surface contamination was responsible for the onset of leakage current and subsequent isolator failure. Rate of increase of leakage current and the leakage current level increased approximately exponentially with isolator temperature. Careful attention to shielding techniques and the elimination of sources of metal oxides appear to have eliminated isolator failures as a thruster life limiting mechanism.

Mantenieks, M. A.↗
NASA NTRS1973

Performance of a 15 cm ion thruster with reliable restart capability

Experimental evaluation of a modified SERT II thruster with dished grids capable of producing a 600 ma ion beam at 2690 sec specific impulse and achieving rapid, reliable startup is described. In addition to steady-state performance curves, thruster performance is examined over the duration of rapid startup and one hour operating sequence. Rapid startup utilizing high voltage spark ignition of the main and neutralizer cathodes is described. Minimal deterioration of the cathodes and the ignition system during 1000 neutralizer cathode startups and 2000 main cathode startups is demonstrated. The need for heaters and a vaporizer control system to facilitate more rapid startup is identified.

Wilbur, P. J.↗
NASA NTRS1973

Demonstration of a pulsing liquid hydrogen/liquid oxygen thruster

The development of an injector/thruster concept capable of pulsing a liquid hydrogen/liquid oxygen attitude control propulsion system thruster over thrust and chamber-pressure ranges of 625 to 1250 lbF and 250 to 500 psia, respectively, is discussed. It is shown how continuing search for a simple light-weight, high-performance reaction control system concept led to successful operation tests at cryogenic propellant temperatures (150 and 45 degrees Rankine for oxygen and hydrogen, respectively). The analytical and experimental phases of the liquid/liquid thruster technology efforts are examined.

Herr, P. N.↗
NASA NTRS1973

On the design and test of a liquid injection electric thruster

The design of the thruster described incorporates a coaxial four-segment trigger assembly to discharge a high-energy capacitor. The discharge ablates a waxy perfluorocarbon from the surface of porous annular metal ring, and the resulting plasma is electromagnetically accelerated to ambient producing thrust. Tests revealed a thruster performance well in excess of the major design goals.

Youmans, E. H.↗
NASA NTRS1973

A 30-cm thruster power processor test console

The development of a high performance ion propulsion system composed of an ion thruster and its associated power processing equipment, dictates the establishment of a mutually compatible set of electrical characteristics. A 30-cm thruster power processing console has been developed which utilizes power and control circuitry applicable to flight hardware designs, incorporates interface circuitry for optional direct computer control, and has self-contained instrumentation for assessing steady-state and dynamic system behavior. This paper discusses the console's design, utility, performance, and the potential impact of this development effort on future hardware designs.

Herron, B. G.↗
NASA NTRS1975

Direct thrust measurement of a 30-cm ion thruster

A direct thrust measurement of a 30-cm diameter ion thruster was accomplished by means of a laser interferometer thrust stand. The thruster was supported in a pendulum manner by three 3.65-m long wires. Electrical power was provided by means of 18 mercury filled pots. A movable 23-button planar probe rake was used to determine thrust loss due to ion beam divergence. Values of thrust, thrust loss due to ion beam divergence, and thrust loss due to multiple ionization were measured for ion beam currents ranging from 0.5 A to 2.5 A. Measured thrust values indicate an accuracy of approximately 1% and are in good agreement with thrust values calculated by indirect measurements.

Banks, B.↗
NASA NTRS1975

A structural and thermal packaging approach for power processing units for 30-cm ion thrusters

Solar Electric Propulsion (SEP) is currently being studied for possible use in a number of near earth and planetary missions. The thruster subsystem for these missions would consist of 30 centimeter ion thrusters with Power Processor Units (PPU) clustered in assemblies of from two to ten units. A preliminary design study of the electronic packaging of the PPU has been completed at Lewis Research Center of NASA. This study evaluates designs meeting the competing requirements of low system weight and overall mission flexibility. These requirements are evaluated regarding structural and thermal design, electrical efficiency, and integration of the electrical circuits into a functional PPU layout.

Maloy, J. E.↗
NASA NTRS1975

Accelerated life test of sputtering and anode deposit spalling in a small mercury ion thruster

Tantalum and molybdenum sputtered from discharge chamber components during operation of a 5 centimeter diameter mercury ion thruster adhered much more strongly to coarsely grit blasted anode surfaces than to standard surfaces. Spalling of the sputtered coating did occur from a coarse screen anode surface but only in flakes less than a mesh unit long. The results were obtained in a 200 hour accelerated life test conducted at an elevated discharge potential of 64.6 volts. The test approximately reproduced the major sputter erosion and deposition effects that occur under normal operation but at approximately 75 times the normal rate. No discharge chamber component suffered sufficient erosion in the test to threaten its structural integrity or further serviceability. The test indicated that the use of tantalum-surfaced discharge chamber components in conjunction with a fine wire screen anode surface should cure the problems of sputter erosion and sputtered deposits spalling in long term operation of small mercury ion thrusters.

Power, J. L.↗