Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Th”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Long-time stress relaxation of a filled elastomer in vacuum environments

Samples of a filled elastomeric ablative material were stored at 45 C and 10 to the -6th torr for 7 months. Their tensile stress-relaxation modulus at constant strain was measured throughout the 7 months. Results of the testing are discussed primarily by comparisons of the data to atmospheric-pressure moduli (determined in this work for shorter periods of time) and with moduli predicted from short-time testing. Confirmation of the strengthening effects of vacuum on this composite was obtained. The use of time-temperature superposition techniques as an approximate accelerated testing procedure for this material under these conditions was also verified.

Ward, T. C.↗

Kinetics of the gas-phase reaction between hydroxyl and carbonyl sulfide over the temperature range 300-517 K

By use of a discharge-flow resonance-fluorescence method the rate constant for the title reaction has been measured at five temperatures in the range 300-520 K. The Arrhenius expression is k(OH + OCS) = (1.3 + or - 0.3) x 10 to the -12th exp/-(2300 + or - 100)/T/ cu cm/s. Mass spectrometry has been used to detect the product HS and to collect some information about its reactivity. This study has carefully avoided the pitfalls associated with possible photolysis of reactants and complications due to H2S impurity in carbonyl sulfide that may have marred previous studies. This study has confirmed that the rate constant for this reaction is so much lower than the value originally used in computer modeling of the upper and lower atmosphere that conclusions about the relative importance of photolysis of OCS and of the reaction OH + OCS in the stratosphere must now be reassessed. The reaction OH + OCS has little significance for atmospheric chemistry.

Leu, M.-T.↗

Metal-semiconductor interfacial reactions - Ni/Si system

X-ray photoelectron spectroscopy and channeling measurements with MeV He-4(+) ions have been used to probe the structure of the interface in the Ni/Si system. It is found that reactions occur where Ni is deposited on Si at 10 to the -10th torr: Si atoms are displaced from lattice sites, the Ni atoms are in an Si-rich environment, and the Ni/Si interface is graded in composition. Composition gradients are present at both interfaces in the Si/Ni2/Si/Ni system. For the Ni-Si system, cooling the substrate to 100 K slows down the reaction rate. The temperature dependence of the interfacial reactivity indicates the kinetic nature of metal-semiconductor interfaces.

Cheung, N. W.↗

The Einstein Observatory and future X-ray telescopes

A history of the events leading to the development and flight of the Einstein Observatory is given. The advantages of using grazing-incidence telescopes for solar and extrasolar X-ray astronomy is first discussed and followed by a description of the HEAO program. The Einstein Observatory marks a departure from the manner in which X-ray investigations are carried out, from individual experiments to the shared use of large facilities. The Observatory has achieved a sensitivity to point sources of 10 to the -14th erg/sq cm-sec in the 1-3 keV band, a flux 500 times smaller than previously detected and about 10 million times smaller than that of the first extrasolar source detected in 1962. The design philosophy of the Observatory entails three principles: (1) the unified scientific approach, (2) the establishment of spacecraft requirements at lowest acceptable levels that still allow operating flexibility, and (3) the idea of 'soft' rather than 'hard' failure. The mirror design, including the high resolution imager, the imaging proportional counter, and the solid-state and focal plane crystal spectrometers, is also given. An account of the struggle to gain acceptance by the scientific community and the funding agencies of the need for the Einstein Observatory mission is discussed. Finally, results of observations made by the Observatory are presented in detail, along with plans for future observation experiments.

Giacconi, R.↗

Amorphous metallizations for high-temperature semiconductor device applications

The initial results of work on a class of semiconductor metallizations which appear to hold promise as primary metallizations and diffusion barriers for high temperature device applications are presented. These metallizations consist of sputter-deposited films of high T sub g amorphous-metal alloys which (primarily because of the absence of grain boundaries) exhibit exceptionally good corrosion-resistance and low diffusion coefficients. Amorphous films of the alloys Ni-Nb, Ni-Mo, W-Si, and Mo-Si were deposited on Si, GaAs, GaP, and various insulating substrates. The films adhere extremely well to the substrates and remain amorphous during thermal cycling to at least 500 C. Rutherford backscattering and Auger electron spectroscopy measurements indicate atomic diffussivities in the 10 to the -19th power sq cm/S range at 450 C.

Wiley, J. D.↗

Gallium phosphide high temperature diodes

High temperature (300 C) diodes for geothermal and other energy applications were developed. A comparison of reverse leakage currents of Si, GaAs, and GaP was made. Diodes made from GaP should be usable to 500 C. A Liquid Phase Epitaxy (LPE) process for producing high quality, grown junction GaP diodes is described. This process uses low vapor pressure Mg as a dopant which allows multiple boat growth in the same LPE run. These LPE wafers were cut into die and metallized to make the diodes. These diodes produce leakage currents below ten to the -9th power A/sq cm at 400 C while exhibiting good high temperature rectification characteristics. High temperature life test data is presented which shows exceptional stability of the V-I characteristics.

Chaffin, R. J.↗

Development of a simple, self-contained flight test data acquisition system

A low cost flight test data acquisition system, applicable to general aviation airplanes, was developed which meets criteria for doing longitudinal and lateral stability analysis. Th package consists of (1) a microprocessor controller and data acquisition module; (2) a transducer module; and (3) a power supply module. The system is easy to install and occupies space in the cabin or baggage compartment of the airplane. All transducers are contained in these modules except the total pressure tube, static pressure air temperature transducer, and control position transducers. The NASA-developed MMLE program was placed on a microcomputer on which all data reduction is done. The flight testing program undertaken proved both the flight testing hardware and the data reduction method to be applicable to the current field of general aviation airplanes.

Renz, R. R. L.↗

Use of Magsat anomaly data for crustal structure and mineral resources in the US midcontinent

Magnetic profiles on individual satellites tracks were examined to identify bad (nonterrestrially-based) data points r profiles. Anomaly profiles for the same satellite track, but at different passes were compared for parallel tracks and for tracks that cross. The selected and processed data were plotted and contoured to develop a preliminary magnetic anomaly map. The map is similar in general morphology to NASA's Magsat global scalar anomaly map, but has more detail which is related to crustal properties. Efforts have begun to interpret the satellite magnetic anomalies in terms of crustal character. The correlation of magnetics with crustal petrology may have a much larger tectonic implication. Th possibility of there being an ultramafic lower crust along one zone as a consequence of a continental collision/subduction which helped form the midcontinent craton in Precambrian times is being investigated.

Carmichael, R. S.↗

SAM 2 Measurements of the Polar Stratospheric Aerosol, volume 2. April 1979 to October 1979

The Stratospheric Aerosol Measurement (SAM) II sensor is abroad the Earth orbiting Nimbus 7 spacecraft proving extinction measurements of the Antarctic and Arctic stratospheric aerosol with a vertical resolution of 1 km. Representative examples and weekly averages of aerosol data and corresponding temperature profiles for the time and place of each SAM II measurement (April 29, 1979, to October 27, 1979) is presented. Contours of aerosol extinction as a function of altitude and longitude or time were plotted and weekly aerosol optical depths were calculated. Seasonal variations and variations in space (altitude and longitude) for both polar regions are easily seen. Typical values of aerosol extinction at the SAM II wavelength of 1.0 micron for the time priod were 1 to 3 x 10 to the -4th power km -1 in the main stratospheric aerosol layer. Optical depths for the stratosphere were about 0.002. Polar stratospheric clouds at altitudes between the tropopause and 20 km were observed during the Antarctic winter at various times and locations. A ready-to-use format containing a representative sample of the second 6 months of data to be used in atmospheric and climatic studies is presented.

Mccormick, M. P.↗

Clocks for airborne systems

The potential performance of compact oscillators, needed for the development of accurate clocks for future airborne systems (such as Identification Friend or Foe schemes), is addressed. In particular, extensive testing of rubidium oscillators manufactured by Efratom is discussed. The results indicate that an accuracy of better than 10 microseconds should be achievable in tactical aircraft provided that appropriate measures are adopted to counter the many environmental factors. In a favorable environment a stability of better than 5 x 10 to the -13th power for one day is achievable with present commercial units, but improvements are required to suit operation in an aircraft. With further development of rubidium controlled clocks the ultimate limitation on time accuracy in aircraft will probably be associated with time dissemination, maintenance difficulties and doctrinal hurdles.

Houlding, N.↗

Prospects for stored ion frequency standards

Fundamental limitations of possible frequency standards based on stored ions are examined. Practical limitations are also addressed but without regard to size, power consumption, and cost. With these guidelines, one can anticipate that a stored ion frequency standard with accuracy and stability better than 10 to the -15th power is now possible.

Wineland, D. J.↗

Friction wear and auger analysis of iron implanted with 1.5-MeV nitrogen ions

The effect of implantation of 1.5-MeV nitrogen ions on the friction and wear characteristics of pure iron sliding against steel was studied in a pin-on disk apparatus. An implantation dose of 5 x 10 to the 17th power ions/sq cm was used. Small reductions in initial and steady-state wear rates were observed for nitrogen-implanted iron riders as compared with unimplanted controls. Auger electron spectroscopy revealed a subsurface Gaussian nitrogen distribution with a maximum concentration of 15 at. % at a depth of 8 x 10 to the -7th m. A similar analysis within the wear scar of an implanted rider after 20 microns of wear yielded only background nitrogen concentration, thus giving no evidence for diffusion of nitrogen beyond the implanted range.

Ferrante, J.↗

Sunlight reflections from a solar power satellite on solar mirrors should not harm the eyes

The potential hazard imposed by the reflection of the Sun's image by the solar power satellite (SPS) was examined. In the worst case, where the transmitter is assumed to be a perfect mirror reflecting the Sun's image normal to the atmosphere, the total energy received by the eye would be 3.36 x 10 to the -7th power watts. The eye's optics would blur the 5.6 sec of art image of the transmitter over a disk approximately 6 minutes arc in diameter, reducing the maximum intensity at the retina by 99%. A given cone in the retina would receive even less energy due to the constant random microtremors and microsaccadic movements of the eye muscles which move the retina over an area some 8 minutes of arc in radius, even during steady fixation. Therefore, very conservative estimates show that the reflections from the transmitter could be viewed safety for at least 3.2 hours and that the entire SPS structure could be viewed for a minimum of 1 hour. The solares mirror is briefly considered and is shown to be safe to view for at least 2.4 minutes.

Hyson, M. T.↗

Asymptotic Expansions and Estimates for the Capillary Problem

The asymptotic properties for the small Bond number B of the equilibrium capillary interface interior to a circular cylindrical tube vertically dipped in an infinite reservoir of liquid are discussed. (The Bond number B is a dimensionless parameter which is the ratio of gravitational to capillary forces.) The formal expansion in powers of B of the solution to the differential equation describing the equilibrium surface (as can be obtained by standard perturbation methods) is proved to be truly asymptotic -- to all orders and uniformly in the variable and parameter gamma, the contact angle. Sequences of general estimates, in closed form, from above and from below, are also given for the solution and related functions. The M-th term in these sequences are asymptotically exact to order m. An idiosyncrasy of the problem, crucial in obtaining these estimates, is the absolute monotonicity of the structural function of the system in integral form.

Brulois, F. P.↗

Ground- versus spaced-based orbital transfer vehicle

A space based orbital transfer vehicle (SBOTV) and ground based OTV's (GBOTV) are compared for debris protection, space based OTV maintenance provisions, flight performance, onorbit refueling, and launch and return operations. Debris protection has a severe impact on the SBOTV, while the penalty for the GBOTV is much less severe. A key technology issue is the protection capability of composite materials. Onorbit maintenance is critical for SBOTV. Reduction of losses during the various transfers is th maine problem with refueling a SBOTV. Zero-g propellant storage and transfer is an important technology area for SBOTV. A reusable shroud must be developed to return GBOTV's if a Shuttle derivative vehicle is used. The advantage of space basing lies in more efficient use of the launch vehicle. Since most of the mass going to LEO is OTV propellant, and the launches to deliver the SBOTV propellant are generally mass limited, substantially fewer launches are required to support the SBOTV.

Rehder, J.↗

A simple model of proton damage in GaAs solar cells

A simple proton damage model for GaAs solar cells is derived and compared to experimental values of change in short circuit currents. The recombination cross section associated with the defects was determined from the experimental comparison to be approximately 1.2 x 10 to the -13th power sq cm in fair agreement with values determined from the deep level transient spectroscopy technique.

Wilson, J. W.↗

Ultimate intrinsic coercivity samarian-cobalt magnet. An Earth based feasibility study for Space Shuttle missions

Techniques for the electromagnetic containerless reaction of samarium with cobalt for the formation of samarium-cobalt alloys are summarized. The effort expended to reduce and instrument the oxygen partial pressure in the reaction chamber and coolant gas system are described as well as the experiments in which these improvements were shown to be partially effective. A stainless steel glove box capable of being evacuated to low 10 to the -6th torr pressure and refilled with ultra-pure argon was built and installed. Necessary accessories to perform SmCo5 powder preparation, compaction and subsequent encapsulation of the powder inside a hot isostatic pressing cannister were designed, built, and incorporated into the chamber. All accessories were tested for proper functioning inside the chamber. Using the facility, the first batch of densified SmCo5 powder was fabricated to near total density. Analysis of the densified compacts shows that oxygen contamination during fabrication was near zero.

Das, D.↗

The 1979-1980 eclipse of Zeta Aurigae. I - The circumstellar envelope

A model of the K-star wind far from the K star, and its interaction with the B star, has been derived from a study of Mg(+) and C(+++) resonance lines in the spectrum of Zeta Aurigae during 1979 and 1980. A mass loss rate from the K star of 2 x 10 to the -8th solar masses/year is suggested by the data; the rate of accretion of the K supergiant's material by the B star then being such that the matter accreted over a period of ten years is of the order of the total mass of the photosphere of the B star.

Chapman, R. D.↗