Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TWINS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Insight of BaCe 0.5 Fe 0.5 O 3– δ twin perovskite oxide composite for solid oxide electrochemical cells

One-pot synthesized twin perovskite oxide composite of BaCe 0.5 Fe 0.5 O 3–δ (BCF), comprising cubic and orthorhombic perovskite phases, shows triple-conducting properties for promising solid oxide electrochemical cells. Phase composition evolution of BCF under various conditions was systematically investigated, revealing that the cubic perovskite phase could be fully/partially reduced into the orthorhombic phase under certain conditions. The reduction happened between the two phases at the interface, leading to the microstructure change. As a result, the corresponding apparent conducting properties also changed due to the difference between predominant conduction properties for each phase. Based on the revealed phase composition, microstructure, and electrochemical properties changes, a deep understanding of BCF's application in different conditions (oxidizing atmospheres, reducing/oxidizing gradients, cathodic conditions, and anodic conditions) was achieved. Triple-conducting property (H + /O 2– /e – ), fast open-circuit voltage response (~16–~470 mV) for gradients change, and improved single-cell performance (~31% lower polarization resistance at 600°C) were comprehensively demonstrated. Besides, the performance was analyzed under anodic conditions, which showed that the microstructure and phase change significantly affected the anodic behavior.

08 HYDROGEN↗

In-Situ Calibrated Digital Process Twin Models for Resource Efficient Manufacturing

The chief objective of manufacturing process improvement efforts is to significantly minimize process resources such as time, cost, waste, and consumed energy while improving product quality and process productivity. This paper presents a novel physics-informed optimization approach based on artificial intelligence (AI) to generate digital process twins (DPTs). The utility of the DPT approach is demonstrated in the case of finish machining of aerospace components made from gamma titanium aluminide alloy (γ-TiAl). This particular component has been plagued with persistent quality defects, including surface and sub-surface cracks, which adversely affect resource efficiency. Previous process improvement efforts have been restricted to anecdotal post-mortem investigation and empirical modeling, which fail to address the fundamental issue of how and when cracks occur during cutting. In this work, the integration of in-situ process characterization with modular physics-based models is presented, and machine learning algorithms are used to create a DPT capable of reducing environmental and energy impacts while significantly increasing yield and profitability. Based on the preliminary results presented here, we report an improvement in the overall embodied energy efficiency of over 84%, 93% in process queuing time, 2% in scrap cost, and 93% in queuing cost has been realized for γ-TiAl machining using our novel approach.

42 ENGINEERING↗

A Digital Twin Framework Utilizing Machine Learning for Robust Predictive Maintenance: Enhancing Tire Health Monitoring

We introduce a novel digital twin (DT) framework for the predictive maintenance of long-term physical systems. Using monitoring tire health as an application, we show how the DT framework can be used to enhance automotive safety and efficiency, and how the technical challenges can be overcome using a three-step approach. First, to manage the data complexity over a long operation span, we employ data reduction techniques to concisely represent physical tires using historical performance and usage data. Relying on these data, for fast real-time prediction, we train a transformer-based model offline on our concise dataset to predict future tire health over time, represented as remaining casing potential (RCP). Based on our architecture, our model quantifies both epistemic and aleatoric uncertainties, providing reliable confidence intervals around predicted RCP. Second, to incorporate real-time data, we update the predictive model in the DT framework, ensuring its accuracy throughout its lifespan with the aid of hybrid modeling and the use of the discrepancy function. Third, to assist decision-making in predictive maintenance, we implement a tire state decision algorithm, which strategically determines the optimal timing for tire replacement based on RCP forecasted by our transformer model. This approach ensures that our DT accurately predicts system health, continually refines its digital representation, and supports predictive maintenance decisions. Furthermore, our framework effectively embodies a physical system, leveraging big data and machine learning (ML) for predictive maintenance, model updates, and decision-making.

advanced computing infrastructure↗

Nanoscale ferroelastic twins formed in strained LaCoO 3 films

The coexistence and coupling of ferroelasticity and magnetic ordering in a single material offers a great opportunity to realize novel devices with multiple tuning knobs. Complex oxides are a particularly promising class of materials to find multiferroic interactions due to their rich phase diagrams, and are sensitive to external perturbations. Still, there are very few examples of these systems. Here, we report the observation of twin domains in ferroelastic LaCoO 3 epitaxial films and their geometric control of structural symmetry intimately linked to the material’s electronic and magnetic states. A unidirectional structural modulation is achieved by selective choice of substrates having twofold rotational symmetry. This modulation perturbs the crystal field–splitting energy, leading to unexpected in-plane anisotropy of orbital configuration and magnetization. These findings demonstrate the use of structural modulation to control multiferroic interactions and may enable a great potential for stimulation of exotic phenomena through artificial domain engineering.

36 MATERIALS SCIENCE↗

$\mathscr{PT}$ symmetry enforced twin exchange as the origin of chirality-induced spin selectivity

Chiral molecules, ubiquitous in chemistry and biology, can differentiate electrons by their spin, a phenomenon known as chirality-induced spin selectivity (CISS). Despite its robustness and technological relevance, CISS has resisted conventional explanation: Spin-orbit coupling (SOC) models cannot fully account for the observed magnitude, room-temperature persistence, or equilibrium signatures. Here, we argue that structural chirality enforces a twin-pair exchange mechanism via the indistinguishability principle, which intrinsically couples spin and spatial degrees of freedom such that wave functions cannot be factorized into spin and spatial components. We derive an effective Hamiltonian that describes both transport and equilibrium CISS phenomena and is non-Hermitian. However, the inherent pseudo-Hermiticity, with $\mathscr{PT}$ symmetry as a special case, ensures real eigenvalues and thermodynamic consistency. We demonstrate that our framework is a step toward resolving long-standing anomalies of CISS. It situates CISS alongside equilibrium symmetry-breaking phenomena such as ferromagnetism and superconductivity, with implications for spintronics, catalysis, and the origins of biological homochirality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refinement of the twinned structure of cymrite from the Ruby Creek deposit (Alaska)

The mineral cymrite from the Ruby Creek deposit (Alaska) was reinvestigated by X-ray diffraction in a pseudo-orthorhombic unit cell with a = 5.3350(1) A, b = 36.9258(8) A, c = 7.6934(1) A, {beta} = 90.00(1){sup o}. A twin law corresponding to a sixfold axis was revealed for the first time. The structure was refined in the monoclinic space group P12{sub 1}1 to the R factor of 5.4%. The Al and Si atoms are assumed to be ordered within a double layer. The rotation of the cation sublattice by 60{sup o} around the c axis leads to the disorder of the T sites in the crystal structure (T = Al, Si).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of twin-free b-oriented YBa{sub 2}Cu{sub 3}O{sub 7} {sub −x} films

YBa{sub 2}Cu{sub 3}O{sub 7−x} films of b orientation have been grown on the surface of (100)SrLaGaO{sub 4} crystal. It is demonstrated that the films pass to the superconducting state at a temperature of 89 K. In the nonsuper-conducting region, the film resistance decreases linearly with a decrease in temperature at a rate of 30 Ω per 100°C. According to the X-ray diffraction data on the crystallographic structure of the YBa{sub 2}Cu{sub 3}O{sub 7−x} films, they are single-crystal and b-oriented. It is shown that the films contain no domains of other crystallographic orientations, including a-oriented domains. Therefore, the films are free of structural twins.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of ultrathin twin-free b-oriented YBa{sub 2}Cu{sub 3}O{sub 7} {sub –} {sub x} films

Twin-free b-oriented YBa{sub 2}Cu{sub 3}O{sub 7–x} films with a thickness less than 40 nm have been epitaxially grown on (100)SrLaGaO{sub 4} crystals. Based on the temperature dependence of resistance, the onset temperature of the transition to the superconducting state is found to be 90 K; the transition width is 4 K. The film growth has been performed in two stages. A (100)PrBa{sub 2}Cu{sub 3}O{sub 7–x} buffer layer was previously grown on a (100)SrLaGaO{sub 4} substrate by rf magnetron sputtering in an Ar–O{sub 2} gas mixture at a continuous and monotonic increase in temperature from 660 to 830°C. The main YBa{sub 2}Cu{sub 3}O{sub 7–x} film was grown on the buffer layer surface by pulsed laser deposition in an oxygen medium at a fixed temperature (800°C). The above processes were implemented in different chambers, which were connected by a vacuum channel for transporting samples. Both films were grown in situ, without contacting atmosphere in all growth stages. An X-ray diffraction study has shown that the YBa{sub 2}Cu{sub 3}O{sub 7–x} films are single-crystal and free of precipitates of other phases and domains of other orientations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kinetic characteristics of subterahertz phonons in optically transparent Y{sub 3}Al{sub 5}O{sub 12} ceramics with twinning elements in their structure

The relationship between the kinetic characteristics of subterahertz thermal phonons and the structural features of grains and grain boundaries in optically transparent yttrium aluminum garnet (YAG) ceramics is investigated. The effect of plastic deformation on the formation of the structure of cubic oxide ceramics is analyzed. It is shown that the main mechanism of plastic deformation responsible for the formation of natural crystallographic boundaries in samples is the twinning effect.

36 MATERIALS SCIENCE↗

Development of Emergency Vehicle Preemption Strategies on Smart Corridors in a Digital Twin Environment

Emergency Response Vehicles (ERVs), such as firetrucks, ambulances, etc. operate with the purpose of saving lives and mitigating property damage. As such, ERV travel-time reductions may result in significant benefits to the community. A common strategy to improve travel times is Emergency Vehicle Preemption (EVP). EVP seeks to reduce ERV delays by providing the right-of-way to ERVs as they approach an intersection. This study proposes a new Dynamic Preemption strategy that determines the need for preemption prior to the ERV reaching the vicinity of the intersection, utilizing real-time data streams. This paper evaluates the effectiveness of some existing and proposed preempt control strategies using a digital twin testbed consisting of a series of signalized intersections on an urban arterial in Georgia. The best EVP strategy maximizes the improvement in ERV travel time while minimizing the adverse effect of preemption on the traffic in conflicting directions. Therefore, this study evaluates both the positive impact of EVP on the ERV as well as the adverse impact on the cross-street traffic. The study found that the potential exists for significant improvements in ERV travel time with the proposed Dynamic Preemption strategy, with minimal impact to the conflicting traffic. For the simulation corridor there was a 20% reduction in the ERV travel times with the implementation of the Dynamic Preemption strategy, compared to traditional EVP practices.

Roy, Somdut [Georgia Institute of Technology]↗

TomoTwin: A simple digital twin for synchrotron tomography

A digital twin for synchrotron-based tomography for generating synthetic datasets from ground-truth phantoms. The code outputs greyscale projection images / tomographic volumes with realistic artifacts such as noise and phase-contrast and emulates their dependence on the acquisition parameters defining the beam and detector configuration. Some ground-truth phantoms are included with the code.

TEKAWADE, ANIKET↗

Digital Twin for Chemical Science (DTCS) v0.01

Directly visualizing the trajectories of chemistry can unravel novel insights into the behavior of catalysts, gas phase reactions, photo-induced dynamics, and building blocks for quantum information processing. The ability of explicitly identifying, tracking, and tagging the exchange of matter, hence the annihilation and creation of new chemical species, can be best realized through a close coupling of theory and experiment. While the synchrotron-based characterization facilities propelled rapidly in its hardware, providing higher brightness, better resolution, and more precision, the software infrastructure is lagging. We developed DTCS (Digital Twin for Chemical Science) v.01, a central platform that faithfully mimics advanced instrumentations in Scientific User Facilities, by solving a variety of technical challenges in data acquisition, analysis, and model-driven interpretation. Rooted in physics and accelerated by AI, we validated this concept by direct comparison with precise experimental X-ray Photoelectron Spectroscopy (XPS) observations using a ubiquitous metal-water interfacial scenario, i.e., Ag/H2O as our main narrative. The DTCS v.01 input mirrors how the bench chemists work, with the output directly linked to the end station computer, thereby providing a user-friendly, knowledge-driven, and accessible user experience with mechanistic insights standardized in a way that are ready to be published, versioned, and transferred flexibly.

Qian, Jin↗

Artificial Intelligence–Enabled Digital Twin for U.S. Cities

Over 50 participants—including national laboratory researchers, academic scholars, industry representatives, and stakeholders from the City of Chicago—convened in person and online to assess the readiness and potential of an Artificial Intelligence–Enabled Digital Twin (AIDT) for urban systems, with the Greater Chicago area serving as the benchmark location. The workshop underscored that the Chicago Urban Integrated Field Laboratory provides an unparalleled testbed for developing and validating urban DTs—combining dense, multiscale observations, advanced physics-based and AI modeling capabilities, and strong stakeholder and industry engagement. Discussions highlighted available datasets, AI architectures for high resolution, multipurpose urban DTs, key applications, and near- and long-term priorities for scaling this framework within Chicago and to other U.S. and global cities.

AIDT↗

Defects in MX2 Phases (DMX) Dataset: STEM Digital Twins

DFT is used to optimize defects in monolayer MX2 phases. We calculate ~600 optimized defect structures, then use multislice simulations in abTEM to generate STEM digital twins, which can be used to train experimental ML. The reference paper for procedures and demonstration of their utility is https://arxiv.org/abs/2305.02917, and the images here correspond with the discussed Messy dataset.

36 MATERIALS SCIENCE↗

Defects in MX2 (DMX) 2.0: STEM Digital Twins

DFT is used to optimize defects in monolayer MX2 phases. We calculate ~600 optimized defect structures, then use multislice simulations in abTEM to generate STEM digital twins, which can be used to train experimental ML. The reference paper for procedures and demonstration of their utility is https://arxiv.org/abs/2305.02917, and the images here correspond with the discussed Messy dataset. Version 2 includes an auxiliary dataset matched with experiment.

36 MATERIALS SCIENCE↗

In situ nanomechanical testing of twinned metals in a transmission electron microscope

This paper focuses on in situ transmission electron microscope (TEM) characterization to explore twins in face-centered-cubic and body-centered-cubic monolithic metals, and their impact on the overall mechanical performance. Taking advantage of simultaneous nanomechanical deformation and nanoscale imaging using versatile in situ TEM tools, direct correlation of these unique microscopic defects with macroscopic mechanical performance becomes possible. This article summarizes recent evidence to support the mechanisms related to strengthening and plasticity in metals, including nanotwinned Cu, Ni, Al, Au, and others in bulk, thin film, and nanowire forms.

36 MATERIALS SCIENCE↗