Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TOKAMAK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Physics design of a 100 keV acceleration grid system for the diagnostic neutral beam for international tokamak experimental reactor

This paper describes the physics design of a 100 keV, 60 A H{sup -} accelerator for the diagnostic neutral beam (DNB) for international tokamak experimental reactor (ITER). The accelerator is a three grid system comprising of 1280 apertures, grouped in 16 groups with 80 apertures per beam group. Several computer codes have been used to optimize the design which follows the same philosophy as the ITER Design Description Document (DDD) 5.3 and the 1 MeV heating and current drive beam line [R. Hemsworth, H. Decamps, J. Graceffa, B. Schunke, M. Tanaka, M. Dremel, A. Tanga, H. P. L. De Esch, F. Geli, J. Milnes, T. Inoue, D. Marcuzzi, P. Sonato, and P. Zaccaria, Nucl. Fusion 49, 045006 (2009)]. The aperture shapes, intergrid distances, and the extractor voltage have been optimized to minimize the beamlet divergence. To suppress the acceleration of coextracted electrons, permanent magnets have been incorporated in the extraction grid, downstream of the cooling water channels. The electron power loads on the extractor and the grounded grids have been calculated assuming 1 coextracted electron per ion. The beamlet divergence is calculated to be 4 mrad. At present the design for the filter field of the RF based ion sources for ITER is not fixed, therefore a few configurations of the same have been considered. Their effect on the transmission of the electrons and beams through the accelerator has been studied. The OPERA-3D code has been used to estimate the aperture offset steering constant of the grounded grid and the extraction grid, the space charge interaction between the beamlets and the kerb design required to compensate for this interaction. All beamlets in the DNB must be focused to a single point in the duct, 20.665 m from the grounded grid, and the required geometrical aimings and aperture offsets have been calculated.

43 PARTICLE ACCELERATORS↗

Full-Wave Studies of Lower Hybrid Wave Propagation in Tokamaks

A full-wave electromagnetic field solver valid the lower hybrid range of frequencies (LHRF) has been developed that utilizes a semi-spectral representation for the RF electric field. Spurious numerical behavior of the field solver that was found to be related to the inclusion of finite electron Larmor radius terms in the wave equation is discussed. The removal of these terms is shown to eliminate all spurious mode generation, leading to well-behaved electric field solutions for parameters typical of LH current drive experiments in present day sized tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Proposal on LHCD Experiments in Spherical Tokamaks

A new approach for LHCD problem in spherical tokamaks (ST) is investigated, when the LH waves are slowed down in poloidal rather than toroidal direction by a grill antenna oriented vertically. Characteristics of wave propagation are found by ray tracing technique modernized for the case of strongly inhomogeneous plasma in ST. RF field distribution in ST plasma was simulated by 2D full-wave code. The grill operation is analyzed in these conditions using 3D antenna code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On Possibility of Low Threshold Parametric Decay Back Scattering Instabilities in Tokamak ECRH Experiments

The experimental conditions leading to reduction of backscattering decay instability threshold in tokamak ECRH experiments are analyzed. It is shown that substantial reduction of the threshold is provided by localization of lower hybrid or ion Bernstein decay waves possible due to non monotonous profile of plasma density in the central region or in the vicinity of magnetic island. The corresponding pump power threshold and decay wave amplification is calculated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Downstream heat flux profile versus midplane T profile in tokamaks

The relationship between the midplane scrape-off-layer (SOL) electron temperature profile and the parallel heat flux profile at the divertor in tokamaks is investigated. A model is applied that takes into account anisotropic thermal diffusion in rectilinear geometry with constant density. Eigenmode analysis is applied to the simplified problem with rectangular geometry and constant, but highly anisotropic, thermal diffusivities. A nonlinear solution is also found for the more realistic problem with anisotropically temperature-dependent thermal diffusivities. Numerical solutions are developed for both cases, with spatially dependent heat flux emerging from the plasma, and geometry that includes a model for the divertor leg. For both constant and temperature-dependent thermal diffusivities, it is found that, below about one-half of its peak, the heat flux profile shape at the divertor, compared to the midplane temperature profile shape, is robustly described by the scaling of the simplest two-point model. However, the physical processes are not those assumed in the simplest two-point model, nor is the numerical coefficient relating q{sub paralleldiv} to T{sub mp}chi{sub parallelmp}/L{sub parallel} as predicted in that model. For realistic parameters, the peak in the heat flux, moreover, can be reduced by a factor of 2 or more relative to the two-point model scaling that fits the remaining profile. For temperature profiles in the SOL region above the x-point set by marginal stability, the heat flux profile to the divertor can be largely decoupled from the prediction of the two-point model. These results suggest opportunities and caveats for data interpretation and possibly favorable outcomes for divertor configurations with extended field lines.

36 MATERIALS SCIENCE↗

Alfven continuum deformation by kinetic geodesic effect in rotating tokamak plasmas

Using a quasitoroidal set of coordinates with coaxial circular magnetic surfaces, Vlasov equation is solved for collisionless plasmas in drift approach and a perpendicular dielectric tensor is found for large aspect ratio tokamaks in a low frequency band. Taking into account plasma rotation and charge separation parallel electric field, it is found that an ion geodesic effect deform Alfven wave continuum producing continuum minimum at the rational magnetic surfaces, which depends on the plasma rotation and poloidal mode numbers. In kinetic approach, the ion thermal motion defines the geodesic effect but the mode frequency also depends on electron temperature. A geodesic ion Alfven mode predicted below the continuum minimum has a small Landau damping in plasmas with Maxwell distribution but the plasma rotation may drive instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Validation of the linear ideal magnetohydrodynamic model of three-dimensional tokamak equilibria

The first quantitative comparison of linear ideal magnetohydrodynamic (MHD) theory with external magnetic measurements of the nonaxisymmetric plasma perturbation driven by external long-wavelength magnetic fields in high-temperature tokamak plasmas is presented. The comparison yields good (within 20%) agreement for plasma pressures up to approx75% of the ideal stability limit calculated without a conducting wall. For higher plasma pressures, the ideal MHD model tends to overestimate the perturbed field indicating the increasing importance of stabilizing nonideal effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of runaway electron beams by visible color camera in the Experimental Advanced Superconducting Tokamak

The synchrotron radiation originated from the energetic runaway electrons has been measured by a visible complementary metal oxide semiconductor camera working in the wavelength ranges of 380-750 nm in the Experimental Advanced Superconducting Tokamak [H. Q. Liu et al., Plasma Phys. Contr. Fusion 49, 995 (2007)]. With a tangential viewing into the plasma in the direction of electron approach on the equatorial plane, the synchrotron radiation from the energetic runaway electrons was measured in full poloidal cross section. The synchrotron radiation diagnostics provides a direct pattern of the runaway beam inside the plasma. The energy and pitch angle of runaway electrons have been obtained according to the synchrotron radiation pattern. A stable shell shape of synchrotron radiation has been observed in a few runaway discharges.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Impurity transport driven by ion temperature gradient turbulence in tokamak plasmas

Impurity transport driven by electrostatic turbulence is analyzed in weakly collisional tokamak plasmas using a semianalytical model based on a boundary layer solution of the gyrokinetic equation. Analytical expressions for the perturbed density responses are derived and used to determine the stability boundaries and the quasilinear particle fluxes. For moderate impurity charge number Z, the stability boundaries are very weakly affected by the increasing impurity charge for constant effective charge, while for lower impurity charge the influence of impurities is larger, if the amount of impurities is not too small. Scalings of the mode frequencies and quasilinear fluxes with charge number, effective charge, impurity density scale length, and collisionality are determined and compared to quasilinear gyrokinetic simulations with GYRO[J. Candy and R. E. Waltz, J. Comput. Phys. 186, 545 (2003)] resulting in very good agreement. Collisions do not affect the mode frequencies, growth rates, and impurity fluxes significantly. The eigenfrequencies and growth rates depend only weakly on Z and Z{sub eff} but they are sensitive to the impurity density gradient scale length. An analytical approximate expression of the zero-flux impurity density gradient is derived and used to discuss its parametric dependencies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A drift-magnetohydrodynamical fluid model of helical magnetic island equilibria in the pedestals of H-mode tokamak plasmas

A drift-magnetohydrodynamical (MHD) fluid model is developed for an isolated, steady-state, helical magnetic island chain, embedded in the pedestal of a large aspect ratio, low-beta, circular cross section, H-mode tokamak plasma, to which an externally generated, multiharmonic, static magnetic perturbation whose amplitude is sufficiently large to fully relax the pedestal toroidal ion flow is applied. The model is based on a set of single helicity, reduced, drift-MHD fluid equations which take into account neoclassical poloidal and toroidal flow damping, the perturbed bootstrap current, diamagnetic flows, anomalous cross-field diffusion, average magnetic-field line curvature, and coupling to drift-acoustic waves. These equations are solved analytically in a number of different ordering regimes by means of a systematic expansion in small quantities. For the case of a freely rotating island chain, the main aims of the calculation are to determine the chain's phase velocity, and the sign and magnitude of the ion polarization term appearing in its Rutherford radial width evolution equation. For the case of a locked island chain, the main aims of the calculation are to determine the sign and magnitude of the polarization term.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First results obtained from the soft x-ray pulse height analyzer on experimental advanced superconducting tokamak

An assembly of soft x-ray pulse height analyzer system, based on silicon drift detector (SDD), has been successfully established on the experimental advanced superconducting tokamak (EAST) to measure the spectrum of soft x-ray emission (E=1-20 keV). The system, including one 15-channel SDD linear array, is installed on EAST horizontal port C. The time-resolved radial profiles of electron temperature and K{sub {alpha}} intensities of metallic impurities have been obtained with a spatial resolution of around 7 cm during a single discharge. It was found that the electron temperatures derived from the system are in good agreement with the values from Thomson scattering measurements. The system can also be applied to the measurement of the long pulse discharge for EAST. The diagnostic system is introduced and some typical experimental results obtained from the system are also presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Entropy production rate in tokamaks with nonaxisymmetric magnetic fields

A variational principle based on an extremum of entropy production rate is derived for an integrable Hamiltonian system in the presence of two perturbations, which are resonant on neighboring or identical resonant surfaces. This method can be used to calculate the neoclassical transport in a magnetic fusion device with a nonaxisymmetric magnetic field. When applied to a tokamak with ripple, it provides an efficient means to discriminate between various regimes, depending on collisionality and ripple amplitude. This technique provides a means to test simplified collision operators suitable for gyrokinetic codes. It is found that these operators need only satisfy modest requirements in order to recover the correct neoclassical equilibrium, at least in the large aspect ratio limit. Finally, it appears that the toroidal viscous damping rate due to ripple is usually not negligible, thus removing the degeneracy between the radial electric field and the toroidal velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron cyclotron emission reconstruction image and m/n=3/2 mode in HT-7 tokamak

Electron cyclotron emission reconstruction image has been used for flux surface reconstruction. The reconstruction image is based on plasma rigid rotation which is obtained from Mirnov diagnostic. From the reconstructed two-dimensional flux surface, the classical m/n=3/2 mode is visualized, which is of similar spatial structure as neoclassical 3/2 mode observed in some other tokamaks [B. Esposito et al., Phys. Rev. Lett. 100, 045006 (2008)].

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Design of far-infrared three-wave polarimeter-interferometer system for the J-TEXT tokamak

A multichannel three-wave far-infrared polarimeter-interferometer will be constructed on the J-TEXT tokamak (R=1.05 m, a=0.27 m, B{sub T}{<=}3 T, and I{sub P}{<=}350 kA) for current density profile and electron density profile measurements. The system will adopt the three-wave polarimeter configuration which was first introduced on RTP. Three 432.5 {mu}m HCOOH lasers pumped by three CO{sub 2} lasers separately will be adopted, which could generate high output power, nearly 50 mW at each cavity. Two of them will be counter-rotating circularly polarized to probe the Faraday angle, while the third laser will be used as a local oscillator to get the phase shift caused by electron density. Excellent port access (600x76 mm{sup 2}) and high laser power would promise a profile measurement across the whole plasma section with good signal quality. A high-speed digital phase comparator with a few ({approx}2) {mu}s temporal resolution will be developed, so that fast changes of current or density profile could be measured. Six channels will be installed in the first stage.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characteristics of four-channel Cherenkov-type detector for measurements of runaway electrons in the ISTTOK tokamak

A diagnostics capable of characterizing the runaway and superthermal electrons has been developing on the ISTTOK tokamak. In previous paper, a use of single-channel Cherenkov-type detector with titanium filter for runaway electron studies in ISTTOK was reported. To measure fast electron populations with different energies, a prototype of a four-channel detector with molybdenum filters was designed. Test-stand studies of filters with different thicknesses (1, 3, 7, 10, 20, 50, and 100 {mu}m) have shown that they should allow the detection of electrons with energies higher than 69, 75, 87, 95, 120, 181, and 260 keV, respectively. First results of measurements with the four-channel detector revealed the possibility to measure reliably different fast electrons populations simultaneously.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of drift-resistive-inertial ballooning transport model for tokamak edge plasmas

A new model is developed for transport driven by drift-resistive-inertial ballooning modes (DRIBMs) in axisymmetric tokamak plasmas. The model is derived using two-fluid reduced Braginskii equations in a generalized s-{alpha} geometry. The unified theory includes diamagnetic effects, parallel electron and ion dynamics, electron inertia, magnetic perturbations, transverse particle diffusion, gyroviscous stress terms, electron and ion equilibrium temperature gradients, and temperature perturbations. A mixing length approximation is used to compute electron and ion thermal transport as well as particle fluxes from eigenvalues and eigenvectors of the linearized equations. The prediction for the saturation level is obtained by balancing the DRIBM growth rate against the nonlinear ExB convection. The parametric dependence of DRIBMs is investigated in systematic scans over density gradient, electron and ion temperature gradients, magnetic-q, collision frequency, magnetic shear, and Larmor radius. The DRIBM threshold is determined as a function of the collision frequency and the density and temperature gradients. The transition from DRIBM to the toroidal ion temperature gradient (ITG) mode is observed for small density gradients. For steep density gradients, the effect of ITG on DRIBM is found to be stabilizing. The transport seen in the DRIBM is of a scale that is consistent with the observed experimental anomalous transport, suggesting that the DRIBM mode could be the principle agent responsible for edge transport in Ohmic and L-mode discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Data acquisition and processing system of the electron cyclotron emission imaging system of the KSTAR tokamak

A new innovative electron cyclotron emission imaging (ECEI) diagnostic system for the Korean Superconducting Tokamak Advanced Research (KSTAR) produces a large amount of data. The design of the data acquisition and processing system of the ECEI diagnostic system should consider covering the large data production and flow. The system design is based on the layered structure scalable to the future extension to accommodate increasing data demands. Software architecture that allows a web-based monitoring of the operation status, remote experiment, and data analysis is discussed. The operating software will help machine operators and users validate the acquired data promptly, prepare next discharge, and enhance the experiment performance and data analysis in a distributed environment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurements of the fast electron bremsstrahlung emission during electron cyclotron resonance heating in the HL-2A tokamak

A fast electron bremsstrahlung (FEB) diagnostic technique based on cadmium telluride (CdTe) detector has been developed recently in the HL-2A tokamak for measurements of the temporal evolution of FEB emission in the energy range of 10-200 keV. With a perpendicular viewing into the plasma on the equatorial plane, the hard x-ray spectra with eight different energy channels are measured. The discrimination of the spectra is implemented by an accurate spectrometry. The system also makes use of fast digitization and software signal processing technology. An ambient environment of neutrons, gammas, and magnetic disturbance requires careful shielding. During electron cyclotron resonance heating, the generation of fast electrons and the oscillations of electron fishbone (e-fishbone) have been found. Using the FEB measurement system, it has been experimentally identified that the mode strongly correlates with the electron cyclotron resonance heating produced fast electrons with 30-70 keV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗