Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMAL PLASMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Spark Plasma Extrusion and the Thermal Barrier Concept

Spark plasma sintering (SPS) is currently a major powder consolidation process with many advantages; however, it is still largely limited to the processing of simple shapes such as discs due to its geometric restrictions. Alternatively, spark plasma extrusion (SPE) is a recently developed process that has superiority over SPS in terms of faster consolidation, generating products of extended geometries and potential grain refinement capabilities under applied current. So far, work on SPE has resulted in large temperature gradients within the extruding material with microstructural and properties in-homogeneities. The present paper reports on a novel approach (thermal barrier concept) that allows the SPE of materials with enhanced uniformity in terms of microstructures and properties. Both aluminum and aluminum-carbon nanotube composites have been successfully processed using this new approach.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Initial growth, refractive index, and crystallinity of thermal and plasma-enhanced atomic layer deposition AlN films

The authors have studied and compared the initial growth and properties of AlN films deposited on Si(111) by thermal and plasma-enhanced atomic layer deposition (ALD) using trimethylaluminum and either ammonia or a N{sub 2}-H{sub 2} mixture as precursors. In-situ spectroscopic ellipsometry was employed to monitor the growth and measure the refractive index of the films during the deposition. The authors found that an incubation stage only occurred for thermal ALD. The linear growth for plasma-enhanced ALD (PEALD) started instantly from the beginning due to the higher nuclei density provided by the presence of plasma. The authors observed the evolution of the refractive index of AlN during the growth, which showed a rapid increase up to a thickness of about 30 nm followed by a saturation. Below this thickness, higher refractive index values were obtained for AlN films grown by PEALD, whereas above that the refractive index was slightly higher for thermal ALD films. X-ray diffraction characterization showed a wurtzite crystalline structure with a (101{sup ¯}0) preferential orientation obtained for all the layers with a slightly better crystallinity for films grown by PEALD.

36 MATERIALS SCIENCE↗

Zero-Dimensional Model to Study the Effectiveness of Plasma Heating and Thermal Energy Confinement in Globus-M Tokamak in Ohmic Heating Modes

Experimental study of thermal energy confinement in magnetic confinement devices is one of the fundamental problems in plasma physics. The data processing technique covering kinetic and magnetic measurements performed for the Globus-M tokamak is described. A zero-dimensional code has been developed on the basis of this approach making it possible to calculate important discharge parameters during the experiment (between discharges): the electron and ion stored thermal energy content, plasma effective charge, and confinement time. Good agreement of the zero-dimensional calculations and ASTRA modeling indicates that this approach can be applied for routine data processing in Globus-M in view of the specifics of the device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of thermalization phenomena in coaxial plasma accelerators

Coaxial plasma accelerators are electromagnetic acceleration devices that employ a self-induced Lorentz force to produce collimated plasma jets with velocities ~50 km s -1 . The accelerator operation is characterized by the formation of an ionization/thermalization zone near gas inlet of the device that continually processes the incoming neutral gas into a highly ionized thermal plasma. In this paper, we present a 1D non-equilibrium plasma model to resolve the plasma formation and the electron-heavy species thermalization phenomena that take place in the thermalization zone. The non-equilibrium model is based on a self-consistent multi-species continuum description of the plasma with finite-rate chemistry. The thermalization zone is modelled by tracking a 1D gas-bit as it convects down the device with an initial gas pressure of 1 atm. The thermalization process occurs in two stages. The first is a plasma production stage, associated with a rapid increase in the charged species number densities facilitated by cathode surface electron emission and volumetric production processes. The production stage results in the formation of a two-temperature plasma with electron energies of ~2.5 eV in a low temperature background gas of ~300 K. The second, a temperature equilibration stage, is characterized by the energy transfer between the electrons and heavy species. In conclusion, the characteristic length scale for thermalization is found to be comparable to axial length of the accelerator thus putting into question the equilibrium magnetohydrodynamics assumption used in modeling coaxial accelerators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron density measurements of atmospheric-pressure non-thermal N{sub 2} plasma jet by Stark broadening and irradiance intensity methods

An atmospheric-pressure non-thermal plasma jet excited by high frequency alternating current using nitrogen is developed and the electron density in the active region of this plasma jet is investigated by two different methods using optical emission spectroscopy, Stark broadening, and irradiance intensity method. The irradiance intensity method shows that the average electron density is about 10{sup 20}/m{sup 3} which is slightly smaller than that by the Stark broadening method. However, the trend of the change in the electron density with input power obtained by these two methods is consistent.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling and Data Needs of Atmospheric Pressure Gas Plasma and Biomaterial Interaction

Non-thermal atmospheric pressure plasmas have received considerable attention recently. One promising application of non-thermal plasma devices appears to be biomaterial and biomedical treatment. Various biological and medical effects of non-thermal plasmas have been observed by a variety of investigators, including bacteria sterilization, cell apoptosis, and blood coagulation, among others. The mechanisms of the plasma-biomaterial interaction are however only poorly understood. A central scientific challenge is therefore how to answer the question: 'What plasma-generated agents are responsible for the observed biological effects?' Our modeling efforts are motivated by this question. In this paper, we review our modeling results of the plasma needle discharge. Then, we address data needs for further modeling and understanding of plasma-biomaterial interaction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sheath structure in plasmas with nonextensively distributed electrons and thermal ions

Sheath region of an electropositive plasma consisting of q-nonextensive electrons and singly charged positive ions with finite temperature is modeled. Using Sagdeev's pseudo potential technique to derive the modified sheath formation criterion, it is shown that the velocity of ions at the sheath edge is directly proportional to the ion temperatures and inversely proportional to the degree of nonextensivity of electrons (q-parameter). Using the modified Bohm criterion, effect of degree of nonextensivity of electrons and temperature of positive ions on the characteristics of the sheath region are investigated numerically. It is shown that an increase in the ion temperature gives rise to an increase in the electrostatic potential and the velocity of ions in the sheath regardless of the value of q. Furthermore, it is seen that the sheath width and the density distribution of the charged particles decrease by increasing the temperature of positive ions. In addition, it is found that the positive ion temperature is less effective on the sheath structure for higher values of the q-parameter. Finally, the results obtained for a thermal plasma with nonextensively distributed electrons are compared with the results of a cold plasma with nonextensive electrons and an extensive (Maxwellian) plasma with thermal ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma sprayed ceramic thermal barrier coatings for turbine vane platforms

The paper describes the results to date of an investigation of advanced plasma sprayed ceramic coatings to demonstrate cooling concepts applicable for turbine vane platforms. It is noted that the increased resistance of plasma sprayed ceramic coatings to cyclic thermal exposure can be achieved by increasing the strain tolerance of the ceramic and by controlling harmful residual stresses. Strain tolerance can be increased by controlling internal structure to minimize harmful flaws and to add favorable discontinuities.

Ruckle, D. L.↗

Electrical and thermal conductivities in dense plasmas

Expressions for the electrical and thermal conductivities in dense plasmas are derived combining the Chester-Thellung-Kubo-Greenwood approach and the Kramers approximation. The infrared divergence is removed assuming a Drude-like behaviour. An analytical expression is obtained for the Lorenz number that interpolates between the cold solid-state and the hot plasma phases. An expression for the electrical resistivity is proposed using the Ziman-Evans formula, from which the thermal conductivity can be deduced using the analytical expression for the Lorenz number. The present method can be used to estimate electrical and thermal conductivities of mixtures. Comparisons with experiment and quantum molecular dynamics simulations are done.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Using L-shell x-ray spectra to determine conditions of non-local thermal dynamic equilibrium plasmas

K-shell x-ray spectra of Li- to H-like ions have long been used to determine plasma conditions. The ratio of integrated line intensities is used to determine the temperature. At the density of non-local thermal dynamic equilibrium (NLTE) plasmas (ne ≈ 10 21 cm -3 ), the K-shell spectrum is not very sensitive to density. We propose using the L-shell emission of open L-shell ions (C- to Li-like) as an alternative to determine both temperature and density of NLTE plasmas. First, the L-shell models of a mid-Z material need to be verified against the temperatures obtained using a K-shell spectrum of a low-Z material. A buried layer platform is being developed at the OMEGA laser to study the open L-shell spectra of NLTE plasmas of mid-Z materials. Studies have been done using a 250 μm diameter dot composed of a layer of 1200 Å thick Zn between two 600 Å thick layers of Ti, in the center of a 1000 μm diameter, 13 μm thick beryllium tamper. Lasers heat the target from both sides for up to 3 ns. The size of the emitting volume vs time was measured with x-ray imaging (face-on and side-on) to determine the density. The temperature was measured from the Ti K-shell spectra. The use of this platform for the verification of atomic L-shell models is discussed.

36 MATERIALS SCIENCE↗

Calculation of thermal fluxes of plasma torch reradiation under the action of laser radiation on a condensed target

The problem of laser deposition with allowance for thermal radiation transport inside and outside the laser torch is considered in a multigroup approximation. The energy fluxes of laser torch thermal radiation onto a target in the far and near zones are calculated as functions of time and the character of the exposure. It is shown that absorption of thermal fluxes in the substrate and target in the course of laser deposition results in their substantial heating. The possibility of diagnosing thermal radiation fluxes from the laser torch by using photodetectors is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Life modeling of atmospheric and low pressure plasma-sprayed thermal-barrier coating

The cycles-to-failure vs cycle duration data for three different thermal barrier coating systems, which consist of atmospheric pressure plasma-sprayed ZrO2-8 percent Y2O3 over similarly deposited or low pressure plasma sprayed Ni-base alloys, are presently analyzed by means of the Miller (1980) oxidation-based life model. Specimens were tested at 1100 C for heating cycle lengths of 1, 6, and 20 h, yielding results supporting the model's value.

Miller, R. A.↗

The Role of Instabilities in Plasmaspheric Heating, Flux Tube Refilling, and the Development of Spatial Structures

Plasma instabilities appear to play an important role in plasmasphere dynamics. Direct interactions between the plasmasphere and other plasma populations lead to energy transfer and heating, to equatorial trapping, and to changes in ionospheric outflow. Super-thermal electron and ring current populations are the dominant sources of energy for these processes. Flute (Interchange), electromagnetic lower-hybrid drift, and E x B drift instabilities can also play important roles in the distribution of thermal, plasmaspheric plasma. As our attention has returned to the remaining plasmaspheric mysteries, it has become clear that the details of plasmaspause formation and erosion and the development of localized, dense thermal plasma structures are almost completely unexplained. Radially sharp density depletions and generalized density loss are seen inside the plasmapause. Narrow and extended regions of enhanced thermal plasma density is found throughout the magnetosphere, even after extended periods of quite geomagnetic conditions. Sharp gradients are often seen on the westward edge of density enhancements, while eastward boundaries are often highly structured.

Gallagher, D. L.↗

Creep of plasma-sprayed-ZrO2 thermal-barrier coatings

Specimens of plasma-sprayed-zirconia thermal-barrier coatings with three different porosities and different initial particle sizes were deformed in compression at initial loads of 6900, 13,800, and 24,100 kPa (1000, 2000, and 3500 psi) and temperatures of 1100, 1250, and 1400 C. The coatings were stabilized with lime, MgO, and two different concentrations of Y2O3. Creep began as soon as the load was applied and continued at a constantly decreasing rate until the load was removed. Temperature and stabilization had a pronounced effect on creep rate while the stress, particle size, and porosity had a lesser effect. Creep deformation was due to cracking and particle sliding.

Firestone, R. F.↗

Plasma model for thermal X-ray sources

Thermal X ray sources associated with rotating collapsed stars with surrounding plasma shells, discussing plasma density profile and electron distribution in stellar magnetosphere

Coppi, B.↗

The thermal X-ray flare plasma

Following a review of current observational and theoretical knowledge of the approximately 10 to the 7th K plasma emitting the thermal soft X-ray bursts accompanying every H alpha solar flare, the fundamental physical problem of the plasma, namely the formation and evolution of the observed X-ray arches, is examined. Extensive Skylab observations of the thermal X-ray plasmas in two large flares, a large subflare and several compact subflares are analyzed to determine plasma physical properties, deduce the dominant physical processes governing the plasma and compare large and small flare characteristics. Results indicate the density of the thermal X-ray plasma to be higher than previously thought (from 10 to the 10th to 10 to the 12th/cu cm for large to small flares), cooling to occur radiatively as much as conductively, heating to continue into the decay phase of large flares, and the mass of the thermal X-ray plasma to be supplied primarily through chromospheric evaporation. Implications of the results for the basic flare mechanism are indicated.

Moore, R.↗

UBIQUITOUS NON-THERMALS IN ASTROPHYSICAL PLASMAS: RESTATING THE DIFFICULTY OF MAINTAINING MAXWELLIANS

This paper outlines the rather narrow conditions on a radiatively decoupled plasma where a Maxwell-Boltzmann (MB) distribution can be assumed with confidence. The complementary non-thermal distribution with non-perturbative kurtosis is argued to have a much broader purview than has previously been accepted. These conditions are expressed in terms of the electron Knudsen number, K{sub e} , the ratio of the electron mean free path to the scale length of electron pressure. Rather generally, f(v < v{sub 2}(K{sub e} )) will be Gaussian, so that MB atomic or wave particle effects controlled by speeds v < v{sub 2} {identical_to} w(15/8K{sub e} ){sup 1/4} will remain defensible, where w is the most probable speed. The sufficient condition for Spitzer-Braginskii plasma fluid closure at the energy equation requires globally K{sub e} (s) {<=} 0.01; this global condition pertains to the maximum value of K{sub e} along the arc length s of the magnetic field (to its extremities) provided that contiguous plasma remains uncoupled from the radiation field. The non-thermal regime K{sub e} > 0.01 is common in all main-sequence stellar atmospheres above approximately 0.05 stellar radii from the surface. The entire solar corona and wind are included in this regime where non-thermal distributions with kurtosis are shown to be ubiquitous, heat flux is not well modeled by Spitzer-Braginskii closure, and fluid modeling is qualitative at best.

79 ASTRONOMY AND ASTROPHYSICS↗

Hollow Cathode Thermal Modelling and Self-Consistent Plasma Solution: Work Function Evaluation for a LaB6 Cathode.

Self-heating hollow cathodes are central components in modern electric thrusters. The plasma discharge inside these devices heats the internal components, thus maintaining the temperatures required for electron emission. Precise knowledge of the physical phenomena governing hollow cathode operation is key to predict their lifetime, specifically, their thermionic emission characteristics. A simulation platform has been built to couple plasma and thermal models of the self-heating hollow cathode to produce a self-consistent solution. A self-consistent solution has been found for a LaB6 hollow cathode operating at 25A and 13 sccm where the work function is assumed to be spatially uniform along the emitter with a value which is allowed to vary as the coupled model iterates to a self-consistent solution. The emitter temperature from the converged solution does not agree with experimental temperature measurements, however. The results of a sensitivity analysis suggest that none of the tolerances in the measurement are responsible for the discrepancy. We hypothesize that either the work function needs to be a function of position along the emitting surfaces or the heat fluxes have been overestimated in the plasma solver.

Meiron, Daniel I.↗