Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEMPERATURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Thermal expansion and phonon anharmonicity of cuprite studied by inelastic neutron scattering and ab initio calculations

Inelastic neutron scattering measurements were performed with a time-of-flight chopper spectrometer to observe phonons in all parts of the Brillouin zone of a single crystal of cuprite Cu 2 O. We reduced the experimental data to phonon dispersions in the high-symmetry directions, and changes between 10 and 300 K are reported. In this paper, we show ab initio quasiharmonic (QH) and anharmonic (AH) calculations of phonon dispersions. We performed all AH calculations with a temperature-dependent effective potential method. Both QH and AH calculations account for the small negative thermal expansion of cuprite at low temperatures. However, the measured temperature-dependent phonon behavior was predicted more accurately with the AH calculations than the QH ones. Nevertheless, at 300 K, the cubic AH used in this paper did not entirely account for the experimental phonon dispersions in cuprite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1976

Ferromagnetic-superparamagnetic granulometry of lunar surface materials

A technique of magnetic granulometry is applied to previously reported data for the temperature dependence of isothermal remanent magnetization (IRM) in 13 lunar surface samples, including three soils. Observed increases in IRM with decreasing temperature are attributed to changes from superparamagnetic to single-domain types of behavior for fine metallic-iron particles. Based on this hypothesis, the temperature dependence of IRM in the examined samples is analyzed to obtain particle-size distributions over the range of mean diameters from 30 to 130 A. It is found that the distribution functions for the soils and a low-grade breccia vary as the inverse square of particle volume and that the distributions for recrystallized breccias and igneous rocks apparently peak about mean values.

Schwerer, F. C.↗
NASA NTRS2004

Thermophysical Properties of Selected II-VI Semiconducting Melts

Thermophysical properties are essential for the accurate predication of the crystal growth process by computational modeling. Currently, the temperature dependent thermophysical property data for the II-VI semiconductor melts are scarce. This paper reports the results of the temperature dependence of melt density, viscosity and electrical conductivity of selected II-VI compounds, including HgTe, HgCdTe and HgZnTe. The melt density was measured using a pycnometric method, and the viscosity and electrical conductivity were measured by a transient torque method. The results were compared with and showed good agreement with the existing data in the literature.

Li, C.↗
DOE OSTI2021

Multiphysics and Multiscale Modeling of Coupled Transport of Chloride Ions in Concrete

Chloride ions (Cl−)-induced corrosion is one of the main degradation mechanisms in reinforced concrete (RC) structures. In most situations, the degradation initiates with the transport of Cl− from the surface of the concrete towards the reinforcing steel. The accumulation of Cl− at the steel-concrete interface could initiate reinforcement corrosion once a threshold Cl− concentration is achieved. An accurate numerical model of the Cl− transport in concrete is required to predict the corrosion initiation in RC structures. However, existing numerical models lack a representation of the heterogenous concrete microstructure resulting from the varying environmental conditions and the indirect effect of time dependent temperature and relative humidity (RH) on the water adsorption and Cl− binding isotherms. In this study, a numerical model is developed to study the coupled transport of Cl− with heat, RH and oxygen (O2) into the concrete. The modeling of the concrete microstructure is performed using the Virtual Cement and Concrete Testing Laboratory (VCCTL) code developed by the U.S. National Institute of Standards and Technology (NIST). The concept of equivalent maturation time is utilized to eliminate the limitation of simulating concrete microstructure using VCCTL in specific environmental conditions such as adiabatic. Thus, a time-dependent concrete microstructure, which depends on the hydration reactions coupled with the temperature and RH of the environment, is achieved to study the Cl− transport. Additionally, Cl− binding isotherms, which are a function of the pH of the concrete pore solution, Cl− concentration, and weight fraction of mono-sulfate aluminate (AFm) and calcium-silicate-hydrate (C-S-H), obtained from an experimental study by the same authors are utilized to account for the Cl− binding of cement hydration products. The temperature dependent RH diffusion was considered to account for the transport of Cl− with moisture transport. The temperature and RH diffusion in the concrete domain, composite theory, and Cl− binding and water adsorption isotherms are used in combination, to estimate the ensuing Cl− diffusion field within the concrete. The coupled transport process of heat, RH, Cl−, and O2 is implemented in the Multiphysics Object-Oriented Simulation Environment (MOOSE) developed by the U.S. Idaho National Laboratory (INL). The model was verified and validated using data from multiple experimental studies with different concrete mixture proportions, curing durations, and environmental conditions. Additionally, a sensitivity analysis was performed to identify that the water-to-cement (w/c) ratio, the exposure duration, the boundary conditions: temperature, RH, surface Cl− concentration, Cl− diffusion coefficient in the capillary water, and the critical RH are the important parameters that govern the Cl− transport in RC structures. In a case study, the capabilities of the developed numerical model are demonstrated by studying the complex 2D diffusion of Cl− in a RC beam located in two different climatic regions: warm and humid weather in Galveston, Texas, and cold and dry weather in North Minnesota, Minnesota, subjected to time varying temperature, RH, and surface Cl− concentrations.

composite theory↗
DOE OSTI2023

High temperature elastic properties of sub-stoichiometric yttrium dihydrides

Yttrium hydrides are considered as candidate materials for neutron moderation applied in microreactors (akin transportable tiny nuclear reactors) owing to their superior thermal stability and hydrogen retention. The evolution of elastic properties of these materials at elevated temperatures, needed for predicting the thermomechanical response and performance of the moderator during in-service reactor conditions, however, is lacking. Here, we report the Young’s and shear elastic moduli of three stoichiometries of bulk yttrium hydride (YH x , x = 1.61, 1.82, and 1.84) from room temperature to 1000°C. In situ temperature-dependent measurements of the longitudinal and shear wave velocities were performed using a laser ultrasonic technique while heating the sample in a vacuum-pumped heating stage. The elastic moduli increased linearly with increasing hydrogen content and decreased by ~10% during heating from room temperature to 1000°C in the three YH x compositions. The linear relationship between the elastic moduli and the hydrogen content in yttrium hydride was verified by atomistic calculations based on density functional theory (DFT). The absence of abrupt changes in the temperature-dependent measurements of elastic modulus of the YH x samples suggested negligible loss of hydrogen at elevated temperatures. Excellent agreement was found between the measured and calculated dependence of the elastic moduli on the stoichiometry, thereby providing a new approach for investigating the effects of fabrication-induced parameters (such as porosity) on the elastic moduli. Furthermore, this study demonstrates the utility of the combined approach involving DFT-based atomistic calculations and measurements of the elastic moduli for the informative development of metal hydrides and can be used as a metric for novel moderator materials investigations for emerging microreactors and beyond.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS2004

Microgravity Studies of Liquid-Liquid Phase Transitions in Alumina-Yttria Melts

The scientific objective of this research is to increase the fundamental knowledge base for liquid- phase processing of technologically important oxide materials. The experimental objective is to define conditions and hardware requirements for microgravity flight experiments to test and expand the experimental hypotheses that: 1. Liquid phase transitions can occur in undercooled melts by a diffusionless process. 2. Onset of the liquid phase transition is accompanied by a large change in the temperature dependence of melt viscosity. Experiments on undercooled YAG (Y3A15012)- and rare earth oxide aluminate composition liquids demonstrated a large departure from an Arrhenian temperature dependence of viscosity. Liquid YAG is nearly inviscid at its 2240 K melting point. Glass fibers were pulled from melts undercooled by ca. 600 K indicating that the viscosity is on the order of 100 Pans (1000 Poise) at 1600 K. This value of viscosity is 500 times greater than that obtained by extrapolation of data for temperatures above the melting point of YAG. These results show that the liquids are extremely fragile and that the onset of the highly non-Arrhenian viscosity-temperature relationship occurs at a temperature considerably below the equilibrium melting point of the solid phases. Further results on undercooled alumina-yttria melts containing 23-42 mole % yttrium oxide indicate that a congruent liquid-liquid phase transition occurs in the undercooled liquids. The rates of transition are inconsistent with a diffusion-limited process. This research is directed to investigation of the scientifically interesting phenomena of polyamorphism and fragility in undercooled rare earth oxide aluminum oxide liquids. The results bear on the technologically important problem of producing high value rare earth-based optical materials.

Guynes, Buddy↗
DOE OSTI2025

Detecting Magnon-phonon coupling in yttrium iron garnet with variable temperature STEM-EELS

Magnons, quanta of spin wave excitations in magnetically ordered materials, have been identified as candidates for several potentially transformative technologies in recent years. Macroscopic techniques, such as neutron scattering or Raman spectroscopy, can be used to identify and analyze magnons, but provide relatively delocalized information about the sample. Understanding how the bonding and local structure of a material interacts with, and influences, the magnon population in a material is a crucial step toward the ability to produce any real-world application utilizing magnons. By leveraging the combined spatial resolution of scanning transmission electron microscopy (STEM) and the energy resolution of monochromated electron energy-loss spectroscopy (EELS) nanoscale analysis of magnons can be performed. While the weak interaction of magnons with the electron beam makes magnon EELS challenging on reasonable timescales, magnon-phonon coupling can be leveraged to understand magnons through their effect on the more easily measured phonons. Here, we examine yttrium iron garnet (YIG) flakes, and demonstrate non-linear, temperature-dependent shifts in the phonon frequencies, consistent with previously described magnon-phonon coupling effects. The ability to measure the temperature-dependence of vibrational frequencies with high precision in individual nanoscale flakes, demonstrates the ability to study magnon-phonon coupling in the STEM with unprecedented spatial resolution.

Reifsnyder, Alexander [ORNL]↗
NASA NTRS1976

Lunar sample analysis

Room temperature internal friction (Q sup-1) values of the 0.00002-0.00003 range were achieved with lunar rock 70215,85 by thorough outgassing procedures in ultrahigh vacuum. Results are presented on the temperature dependence of Q sup -1 as measured in the range 25 C to 600 C along with some data on the change in Q sup -1 with pressure in ultrahigh vacuum. The temperature dependence shows the existence of an internal friction peak at around 200 C followed at high temperatures by an extensive region with flat Q sup -1 (approximately 0.001); the work at ultrahigh vacuum shows decreases in the internal friction with decreases in ambient pressure even in the range 10 to the -8 to 10 to the -10 power torr.

Tittmann, B. R.↗
DOE OSTI2024

Unusual dynamics of tetrahedral liquids caused by the competition between dynamic heterogeneity and structural heterogeneity

Tetrahedral liquids exhibit intriguing thermodynamic and transport properties because of the various ways tetrahedra can be packed and connected. Recently, an unusual temperature dependence of the stretching exponent β in a model tetrahedral liquid ZnCl 2 from T m + 85 K to T m + 35 K has been reported using neutron-spin echo spectroscopy. This discovery stands in sharp contrast to other glass-forming liquids. In this study, we conducted neural network force field driven molecular dynamic simulations of ZnCl 2 . We found a non-monotonic temperature dependence of β from liquid to supercooled liquid temperatures. Further structural decomposition and dynamic analysis suggest that this unusual dynamic behavior is a result of the competition between the decrease in the diversity of tetrahedra motifs (structural heterogeneity) and the increase in glassy dynamic heterogeneity. Furthermore, this result may contribute to new understandings of the structural relaxation of other network liquids.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quantifying the anomalous water absorption behavior of cement mortar in view of its physical sensitivity to water

The one-dimensional water absorption into cement-based materials, possibly the simplest case of unsaturated water flow playing a fundamental role in predicting mass transport and durability, is still far from being completely understood due to several puzzling anomalies. Considering the water sensitivity of C-S-H gels (swell upon wetting and contract upon drying), a modified Richards equation (MRE) is proposed to quantify the anomalous water absorption into cement-based materials of changing porosity. Consistent experimental tests on a cement mortar and calculations indicate that the MRE with time-decaying water permeability can quantitatively capture the long-term absorption with two linear stages and a nonlinear transition stage between them. The water sensitivity is validated to be responsible for the anomalous deviation of water absorption from the classical square root of time law. It also partially contributes to the anomalous dependence of sorptivity on the temperature-dependent surface tension and viscosity of water and many organic liquids.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nanoscale Magnetic Ordering Dynamics in a High Curie Temperature Ferromagnet

Thermally driven transitions between ferromagnetic and paramagnetic phases are characterized by critical behavior with divergent susceptibilities, long-range correlations, and spin dynamics that can span kHz to GHz scales as the material approaches the critical temperature T c , but it has proven technically challenging to probe the relevant length and time scales with most conventional measurement techniques. In this study, we employ scanning nitrogen-vacancy center based magnetometry and relaxometry to reveal the critical behavior of a high-T c ferromagnetic oxide near its Curie temperature. Cluster analysis of the measured temperature-dependent nanoscale magnetic textures points to a 3D universality class with a correlation length that diverges near T c . Meanwhile, the temperature-dependent spin dynamics, measured through all optical relaxometry suggest that the phase transition is in the XY universality class. In conclusion, our results capture both static and dynamic aspects of critical behavior, providing insights into universal properties that govern phase transitions in magnetic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hysteretic temperature sensitivity of wetland CH 4 fluxes explained by substrate availability and microbial activity

Methane (CH 4 ) emissions from wetlands are likely increasing and important in global climate change assessments. However, contemporary terrestrial biogeochemical model predictions of CH 4 emissions are very uncertain, at least in part due to prescribed temperature sensitivity of CH 4 production and emission. While statistically consistent apparent CH 4 emission temperature dependencies have been inferred from meta-analyses across microbial to ecosystem scales, year-round ecosystem-scale observations have contradicted that finding. Here, we show that apparent CH 4 emission temperature dependencies inferred from year-round chamber measurements exhibit substantial intra-seasonal variability, suggesting that using static temperature relations to predict CH 4 emissions is mechanistically flawed. Our model results indicate that such intra-seasonal variability is driven by substrate-mediated microbial and abiotic interactions: seasonal cycles in substrate availability favors CH 4 production later in the season, leading to hysteretic temperature sensitivity of CH 4 production and emission. Our findings demonstrate the uncertainty of inferring CH 4 emission or production rates from temperature alone and highlight the need to represent microbial and abiotic interactions in wetland biogeochemical models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Ultrawide bandgap vertical β-(Al x Ga1 −x )2O3 Schottky barrier diodes on free-standing β-Ga2O3 substrates

Ultrawide bandgap β-(AlxGa1−x)2O3 vertical Schottky barrier diodes on (010) β-Ga2O3 substrates are demonstrated. The β-(AlxGa1−x)2O3 epilayer has an Al composition of 21% and a nominal Si doping of 2 × 1017 cm−3 grown by molecular beam epitaxy. Pt/Ti/Au has been employed as the top Schottky contact, whereas Ti/Au has been utilized as the bottom Ohmic contact. The fabricated devices show excellent rectification with a high on/off ratio of ∼109, a turn-on voltage of 1.5 V, and an on-resistance of 3.4 mΩ cm2. Temperature-dependent forward current-voltage characteristics show effective Schottky barrier height varied from 0.91 to 1.18 eV while the ideality factor from 1.8 to 1.1 with increasing temperatures, which is ascribed to the inhomogeneity of the metal/semiconductor interface. The Schottky barrier height was considered a Gaussian distribution of potential, where the extracted mean barrier height and a standard deviation at zero bias were 1.81 and 0.18 eV, respectively. A comprehensive analysis of the device leakage was performed to identify possible leakage mechanisms by studying temperature-dependent reverse current-voltage characteristics. At reverse bias, due to the large Schottky barrier height, the contributions from thermionic emission and thermionic field emission are negligible. By fitting reverse leakage currents at different temperatures, it was identified that Poole–Frenkel emission and trap-assisted tunneling are the main leakage mechanisms at high- and low-temperature regimes, respectively. Electrons can tunnel through the Schottky barrier assisted by traps at low temperatures, while they can escape these traps at high temperatures and be transported under high electric fields. This work can serve as an important reference for the future development of ultrawide bandgap β-(AlxGa1−x)2O3 power electronics, RF electronics, and ultraviolet photonics.

Materials Science↗
NASA NTRS1991

A simple parameterization of ozone infrared absorption for atmospheric heating rate calculations

A simple parameterization of ozone absorption in the 9.6-micron region which is suitable for two- and three-dimensional stratospheric and tropospheric models is presented. The band is divided into two parts, a brand center region and a band wing region, grouping together regions for which the temperature dependence of absorption is similar. Each of the two regions is modeled with a function having the form of the Goody random model, with pressure and temperature dependent band parameters chosen by empirically fitting line-by-line equivalent widths for pressures between 0.25 and 1000 mbar and ozone absorber amounts between 1.0 x 10 to the -7th and 1.0 cm atm. The model has been applied to calculations of atmospheric heating rates using an absorber amount weighted mean pressure and temperature along the inhomogeneous paths necessary for flux computations. In the stratosphere, maximum errors in the heating rates relative to line-by-line calculations are 0.1 K/d, or 5 percent of the peak cooling at the stratopause. In the troposphere the errors are at most 0.005 K/d.

Rosenfield, Joan E.↗
DOE OSTI2022

Thermodynamics of the Nonrelativistic Free-Electron Fermi Gas in One, Two, and Three Dimensions from the Degenerate to the Nondegenerate Temperature Regime

The thermodynamic properties of a nonrelativistic free-electron Fermi gas is of fundamental interest in condensed matter physics. Properties previously studied in three-dimensions (3D) in the lowand high-temperature limits include the internal energy, heat capacity, zero-field magnetic spin susceptibility, and pressure. Here we report solutions for the temperature dependence spanning these two temperature regimes of the chemical potential, internal energy, magnetic susceptibility, and the heat capacity at constant volume in 1D, 2D, and 3D. Also calculated are the pressure, enthalpy, heat capacity at constant pressure, isothermal compressibility, and thermal expansion coefficient versus temperature in 2D and 3D. Of primary interest here are the detailed dimension-dependent crossovers of these properties between the degenerate and nondegenerate temperature regime, which are graphically illustrated for each of the above properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1976

Recombination of electrons with NH4/+/-/NH3/n-series ions

The paper examines the recombination of electrons with ammonium-series cluster ions, NH4(+)-(NH3)n, for two reasons: (1) NH4(+) may be a significant ion in the lower atmospheres of the earth and the outer planets, and (2) to investigate the weak temperature dependence of the cluster ion's recombination coefficient. A microwave afterglow mass spectrometer was used to determine the recombination coefficients for the first five members of the ammonium series, (18+) through (86+), at temperatures between 200 and 410 K. The electron temperature dependence of the recombination coefficient was determined for (35+) and (52+), the n = 1 and 2 cluster ions, over the temperature range 300-3000 K.

Huang, C.-M.↗
DOE OSTI2022

Direct observation of a dynamical glass transition in a nanomagnetic artificial Hopfield network

Spin glasses, generally defined as disordered systems with randomized competing interactions, are a widely investigated complex system. Theoretical models describing spin glasses are broadly used in other complex systems, such as those describing brain function, error-correcting codes5 or stock-market dynamics. This wide interest in spin glasses provides strong motivation to generate an artificial spin glass within the framework of artificial spin ice systems. Here we present the experimental realization of an artificial spin glass consisting of dipolar coupled single-domain Ising-type nanomagnets arranged onto an interaction network that replicates the aspects of a Hopfield neural network. Using cryogenic X-ray photoemission electron microscopy (XPEEM), we performed temperature-dependent imaging of thermally driven moment fluctuations within these networks and observed characteristic features of a two-dimensional Ising spin glass. Specifically, the temperature dependence of the spin glass correlation function follows a power-law trend predicted from theoretical models on two-dimensional spin glasses. As a result, we observe clear signatures of the hard-to-observe rugged spin glass free energy in the form of sub-aging, out-of-equilibrium autocorrelations and a transition from stable to unstable dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Uncovering electron-phonon scattering and phonon dynamics in type-I Weyl semimetals

Studies of topological semimetals have revealed spectacular transport phenomena spanning extreme magnetoresistance effects and ultrahigh mobilities. As phonon dynamics and electron-phonon scattering play a critical role in the electrical and thermal transport, in this work we pursue a fundamental understanding of these effects in type-I Weyl semimetals NbAs and TaAs. In the temperature-dependent Raman spectra of NbAs we reveal a previously unreported Fano line shape, a signature stemming from the electron-phonon interaction. Additionally, the temperature dependence of the A 1 phonon linewidths in both NbAs and TaAs strongly deviate from the standard model of anharmonic decay. To capture the mechanisms responsible for the observed Fano asymmetry and the atypical phonon linewidth, we present first-principles calculations of the phonon self-energy correction due to the electron-phonon interaction. Through this study of the phonon dynamics and electron-phonon interaction in these Weyl semimetals, we consider specific microscopic pathways which could contribute to the nature of their macroscopic transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗