Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar Cells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Summary of solar cell data from the Long Duration Exposure Facility (LDEF)

The Long Duration Exposure Facility (LDEF) was composed of many separate experiments, some of which contained solar cells. These solar cells were distributed at various positions on the LDEF and, therefore, were exposed to the space environment with an orientational dependence. This report will address the space environmental effects on solar cells and solar cell assemblies (SCA's), including electrical interconnects and associated insulation blankets where flown in conjunction with solar cells.

Hill, David C.↗

GaAs Solar Cell Radiation Handbook

The handbook discusses the history of GaAs solar cell development, presents equations useful for working with GaAs solar cells, describes commonly used instrumentation techniques for assessing radiation effects in solar cells and fundamental processes occurring in solar cells exposed to ionizing radiation, and explains why radiation decreases the electrical performance of solar cells. Three basic elements required to perform solar array degradation calculations: degradation data for GaAs solar cells after irradiation with 1 MeV electrons at normal incidence; relative damage coefficients for omnidirectional electron and proton exposure; and the definition of the space radiation environment for the orbit of interest, are developed and used to perform a solar array degradation calculation.

Anspaugh, B. E.↗

ATS-6 solar cell experiment/improvement

ATS 6 solar cell flight experiment data through 2 years of synchronous orbit operation are presented. Comparisons are made of the performances of the 13 different types of solar cell/cover configurations, including new cover processes and materials, and the COMSAT violet cell. These performances are also compared to the performances of the LES 6 solar cell experiment, the ATS 6 main solar arrays, and the Hughes Aircraft Company solar arrays, and to laboratory spectrum electron irradiations. It was found that the cells of the ATS 6 experiment generally performed as expected through 6 to 9 months in orbit, but that at 2 years they were more severely degraded than expected.

Goldhammer, L. J.↗

Development of Thin Solar Cells for Space Applications at NASA Glenn Research Center

NASA GRC Thin Film Solar Cell program is developing solar cell technologies for space applications which address two critical metrics: higher specific power (power per unit mass) and lower launch stowed volume. To be considered for space applications, an array using thin film solar cells must offer significantly higher specific power while reducing stowed volume compared to the present technologies being flown on space missions, namely crystalline solar cells. The NASA GRC program is developing single-source precursors and the requisite deposition hardware to grow high-efficiency, thin-film solar cells on polymer substrates at low deposition temperatures. Using low deposition temperatures enables the thin film solar cells to be grown on a variety of polymer substrates, many of which would not survive the high temperature processing currently used to fabricate thin film solar cells. The talk will present the latest results of this research program.

Dickman, John E.↗

Optical properties of thin gold films applied to Schottky barrier solar cells

The Schottky barrier solar cell is considered a possible candidate for converting solar to electrical energy both for space and terrestrial applications. Knowledge of the optical constants of the ultrathin metal film used in the cell is essential for analyzing and designing higher efficiency Schottky barrier cells. The optical constants of 7.5 -nm (75-A) gold films on gallium arsenide have been obtained. In addition, the absolute collection efficiency of Schottky barrier solar cells has been determined from measured spectral response and optical constants of the gold film.

YEH Y. M.↗

Compensated Contacts for Three-Terminal Transistor Solar Cells

The heterojunction bipolar transistor solar cell (HBTSC) is an alternative to conventional double-junction solar cells that combines the advantages of three-terminal architectures with a compact design. A critical part of the HBTSC fabrication is the implementation of the middle contact, the one associated to the base layer in the transistor structure, because this layer can be damaged by the diffusion of metallic species during contact annealing. As a solution we propose to implement a "compensated contact", that is, to leave a thin (< 200 nm) portion of emitter or collector between the base layer and the contact metals and compensate its doping during contact annealing. Using an Au/Zn/Au metal structure to compensate a 150 nm thick portion of the collector, we obtain a specific contact resistance ~8 10-4 ..omega.. cm2. This value is fairly invariant for annealing temperatures between 400 and 460 degrees C and annealing times between 2 and 5 minutes, and it does not improve by adding Pd to the metallic stack. Optimizing the compensated contact technology opens the path to the realization of III-V-material-based HBTSCs with open-circuit voltages and fill factors comparable to those of conventional multijunction architectures.

contact resistance↗

Results from testing and analysis of solar cells flown on LDEF

A brief discussion of the solar cell experiments flown on the Long Duration Exposure Facility (LDEF) is provided. The information presented is a collation of results published by the various experimenters. This process of collation and documentation is an ongoing Systems Special Investigation Group (SIG) effort. There are four LEO environments, operating individually and/or synergistically, that cause performance loss in solar cells: meteoroid and space debris, atomic oxygen, ultraviolet radiation, and charged particle radiation. In addition, the effects of contamination caused by outgassing of materials used on the specific spacecraft play a role in decreasing the light being transmitted through the coverglass and adhesive to the solar cell. From the results presented on the solar cells aboard LDEF, the most extensive degradation of the solar cells came from impacts and the resulting cratering. The extent of the damage to the solar cells was largely dependent upon the size and energy of the meteoroids or space debris. The other cause of degradation was reduced light reaching the solar cell. This was caused by contamination, UV degradation of coverglass adhesive, and/or atomic oxygen/UV degradation of antireflection coatings.

Dursch, Harry↗

Space solar cells - High efficiency and radiation damage

The proceedings of the Third Solar Cell High Efficiency and Radiation Damage Meeting are outlined. The topics covered included high efficiency silicon solar cells, silicon solar cell radiation damage, GaAs solar cell performance, and 30 percent conversion devices. The study of radiation damage from a fundamental defect-centered basis is discussed and evaluated as a focus of future work. 18% AM0 efficiency and 0.7 V open-circuit voltages are designated as achievable goals for silicon solar cells, and the potential for 30% AM0 efficiencies from monolithic tandem cell designs without sunlight concentration is noted. In addition to its potential for 20% AM0 efficiencies, the GaAs cell offers the possibility of a radiation-insensitive power supply when operated at temperatures near 200 C.

Brandhorst, H. W., Jr.↗

High Efficiency Single Crystal CdTe Solar Cells: November 19, 2009 - January 31, 2011

The goal of the program was to develop single crystal CdTe-based top cells grown on Si solar cells as a platform for the subsequent manufacture of high efficiency tandem cells for CPV applications. The keys to both the single junction and the tandem junction cell architectures are the ability to grow high quality single-crystal CdTe and CdZnTe layers on p-type Si substrates, to dope the CdTe andCdZnTe controllably, both n and p-type, and to make low resistance ohmic front and back contacts. EPIR demonstrated the consistent MBE growth of CdTe/Si and CdZnTe/Si having high crystalline quality despite very large lattice mismatches; epitaxial CdTe/Si and CdZnTe/Si consistently showed state-of-the-art electron mobilities and good hole mobilities; bulk minority carrier recombination lifetimesof unintentionally p-doped CdTe and CdZnTe grown by MBE on Si were demonstrated to be consistently of order 100 ns or longer; desired n- and p-doping levels were achieved; solar cell series specific resistances <10 ?-cm2 were achieved; A single-junction solar cell having a state-of-the-art value of Voc and a unverified 16.4% efficiency was fabricated from CdZnTe having a 1.80 eV bandgap, idealfor the top junction in a tandem cell with a Si bottom junction.

14 SOLAR ENERGY↗

Towards Perovskite Silicon Tandem Solar Cells with Optimized Optical Properties

Perovskite silicon tandem solar cells can overcome the efficiency limit of single junction solar cells. For an optimized optical performance, we propose a 2-terminal device featuring a front-side anti-reflection structure, optimized layer thicknesses, a meso-porous scaffold for the perovskite solar cell and a rear-side light-trapping structure for the silicon solar cell. To maintain the functionality of the underlying layers, we have developed a low-temperature process to realize a meso-porous TiO 2 scaffold via ultra-violet (UV) curing. With perovskite solar cell efficiencies >15%, we achieve results comparable to our conventional high-temperature (> 500 degrees C) route. For the optical optimization of the complex tandem device with elements of different feature sizes, we apply a matrix-based formalism and show how layer thickness optimization and the rear-side light trapping can significantly improve the current of the tandem device.

14 SOLAR ENERGY↗

Metamorphic III–V Solar Cells: Recent Progress and Potential

Inverted metamorphic multijunction solar cells have been demonstrated to be a pathway to achieve the highest photovoltaic (PV) conversion efficiencies. Attaining high-quality lattice-mismatched (metamorphic) semiconductor devices is challenging. However, recent improvements to compositionally graded buffer epitaxy and junction structures have led to the achievement of high-quality metamorphic solar cells exhibiting internal luminescence efficiencies over 90%. For this high material quality, photon recycling is significant, and therefore, the optical environment of the solar cell becomes important. In this paper, we first present recent progress and performance results for 1- and 0.7-eV GaInAs solar cells grown on GaAs substrates. Then, an electrooptical model is used to assess the potential performance improvements in current metamorphic solar cells under different realizable design scenarios. The results show that the quality of 1-eV subcells is such that further improving its electronic quality does not produce significant Voc increases in the four-junction inverted metamorphic subcells, unless a back reflector is used to enhance photon recycling, which would significantly complicate the structure. Conversely, improving the electronic quality of the 0.7-eV subcell would lead to significant Voc boosts, driving the progress of four-junction inverted metamorphic solar cells.

14 SOLAR ENERGY↗

Early results of the ATS-6 solar cell flight experiment

This paper presents preliminary ATS-6 solar-cell flight-experiment data through the first 247 days in synchronous orbit. The experiment is transmitting data on forty 2 x 2-cm solar cells representing 16 solar-cell configurations. The experiment is designed to study the effect of this orbit on select solar cells and cover-glass parameters such as solar-cell thickness and base resistivity, cover-glass thickness variation, new cover processes, and materials such as 7940 and 7070 integral covers as well as the FEP covers, the COMSAT 'violet' cell, and backside irradiation effects. The in-space solar-cell data indicate short-circuit currents are running higher by 1% to 8% than in measurements made with solar simulations; maximum power varied between -1% and +6%. Degradation of short-circuit current due to ultraviolet effects was determined to be about 2% after 50 days in orbit. All cells performed well through 247 days in orbit except the FEP-covered cells, which appear to have increased their rate of degradation during the eclipse season.

Goldhammer, L. J.↗

Solar energy conversion through the interaction of plasmons with tunnel junctions. Part A: Solar cell analysis. Part B: Photoconductor analysis

A solar cell utilizing guided optical waves and tunnel junctions was analyzed to determine its feasibility. From this analysis, it appears that the limits imposed upon conventional multiple cell systems also limit this solar cell. Due to this limitation, it appears that the relative simplicity of the conventional multiple cell systems over the solar cell make the conventional multiple cell systems the more promising candidate for improvement. It was discovered that some superlattice structures studied could be incorporated into an infrared photodetector. This photoconductor appears to be promising as a high speed, sensitive (high D sup star sub BLIP) detector in the wavelength range from 15 to over 100 micrometers.

Welsh, P. E.↗

Results of the 1974 through 1977 NASA/JPL balloon flight solar cell calibration program

From 1974 through 1977, seven solar cell calibration flights and two R&D flights with a spectroradiometer as a payload were attempted. There were two R&D flights, and one calibration flight that failed. Each calibration flight balloon was designed to carry its payload to an altitude of 36.6 km (120 kft). The R&D flight balloons were designed for a payload altitude of 47.5 km (150 kft). At the end of the flight period, the upper (solar cell calibration system) and lower (consolidated instrument package (DIP) payloads were separated from the balloon and descend via parachutes. The calibrated solar cells recovered in this manner were used as primary intensity reference standards during solar simulator testing of solar cells and solar arrays with similar spectral response characteristics. This method of calibration has become the most widely accepted technique for developing space standard solar cells.

Sidwell, L. B.↗

Experimental Determination of Power Losses and Heat Generation in Solar Cells for Photovoltaic-Thermal Applications

Solar cell thermal recovery has recently attracted more and more attention as a viable solution to increase photovoltaic efficiency. However, the convenience of the implementation of such a strategy is bound to the precise evaluation of the recoverable thermal power and to a proper definition of the losses occurring within the solar device. In this work, we establish a framework in which all solar cell losses are defined and described. The aim is to determine the components of the thermal fraction. We therefore describe an experimental method to precisely compute these components from the measurement of the external quantum efficiency, the current–voltage characteristics, and the reflectivity of the solar cell. Applying this method to three different types of devices (bulk, thin film, and multi-junction), we could exploit the relationships among losses for the main three generations of PV cells available nowadays. In addition, since the model is explicitly wavelength dependent, we could show how thermal losses in all cells occur over the whole solar spectrum, and not only in the infrared region. This demonstrates that profitable thermal harvesting technologies should enable heat recovery over the whole solar spectral range.

36 MATERIALS SCIENCE↗

Wire-based metallization for solar cells

Approaches for fabricating wire-based metallization for solar cells, and the resulting solar cells, are described. In an example, a solar cell includes a substrate having a back surface and an opposing light-receiving surface. A plurality of alternating N-type and P-type semiconductor regions is disposed in or above the back surface of the substrate. A conductive contact structure is disposed on the plurality of alternating N-type and P-type semiconductor regions. The conductive contact structure includes a plurality of metal wires. Each metal wire of the plurality of metal wires is parallel along a first direction to form a one-dimensional layout of a metallization layer for the solar cell.

Sewell, Richard Hamilton↗