Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Secondary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Interpretation of Beta Lyrae. III - A study of the disk around the secondary component

Light curves of Beta Lyrae available in the far-ultraviolet, visual, and infrared regions of the spectrum at numerous phases in eclipse are analyzed in order to investigate the physical and radiative nature of the disk surrounding the secondary component. The results of this analysis together with those of other investigators lead to the proposal that the outer regions of the disk are dominated by free electrons. This electron-scattering envelope is most likely the source of infrared radiation as well as the cause of the observed polarization. However, the radiation in the region from the optical to the far-ultraviolet comes mainly from submerged layers where local thermodynamic equilibrium prevails. These layers represent the photosphere of either the disk or the secondary component itself.

Brown, D. A.↗

Secondary electron emission properties of conducting surfaces for use in multistage depressed collectors

An Auger spectrometer in ultrahigh vacuum was used to measure the secondary emission properties of a number of candidate collector-materials including beryllium, carbon, (soot and pyrolytic graphite), copper, titanium carbide and tantalum. The advantage of the technique used is that the surface chemical constituents could be determined just before the secondary emission characteristics of the surface were measured. Pyrolytic graphite roughened by sputter etching showed the most favorable results for depressed collector use.

Forman, R.↗

Stable dielectric charge distributions from field enhancement of secondary mission

The emission of secondary electrons from dielectrics subject to numerous effects of electric field which are experimentally difficult to control is discussed. Measurements are reported using pulse techniques such that local fields do not build to significant levels, but measurements with fields present are also of interest. A specific series of measurements under controlled conditions are described and their implications in terms of fields, magnitude and angle, near the dielectric surface were examined. The measurements were made for a charged fluorinated-ethylene-propylene surface near a grounded aluminum half-round resting on the surface. The geometry produced a stable surface-charge gradient being controlled by a strongly enhanced secondary emission for which a model is constructed. Observations of surface flashovers under various conditions confirm the predictions of some scaling exercises.

Robinson, J. W.↗

Fluctuations in microwave background radiation due to secondary ionization of the intergalactic gas in the universe

Secondary heating and ionization of the intergalactic gas at redshifts z approximately 10-30 could lead to the large optical depth of the Universe for Thomson scattering and could smooth the primordial fluctuations formed at z approximately 1500. It is shown that the gas motions connected with the large scale density perturbations at z approximately 10-15 must lead to the generation of secondary fluctuations of microwave background. The contribution of the rich clusters of galaxies and young galaxies to the fluctuations of microwave background is also estimated.

Sunyayev, R. A.↗

The role of energetic particle precipitation in Jovian magnetospherics. I - Secondary electrons from the ionosphere of Jupiter

Escape of photoelectrons from the Jovian ionosphere produces only a meager source of thermal plasma for the inflated centrifugally unstable magnetosphere and is unable to account for the 100 eV thermal plasma temperatures of the magnetosphere. Since the Jovian magnetosphere is well populated with highly energetic electrons, the creation of secondaries and the energy degradation of the primaries precipitating into the lower ionosphere provide additional sources of magnetospheric thermal plasma as well as of the energy for further elevating the plasma temperatures in the top side ionosphere. The efficiencies with which escaping electrons are created by precipitating electrons with energies up to several MeV are computed using energetic electron transport and thermalization codes. The more energetic incident fluxes are far less efficient in creating escaping electrons than the lower energy fluxes with only 0.001% of the secondaries escaping for a 1 MeV source versus 3% for a 1 keV source. Incident fluxes of the order of 10 to 100 per sq cm per sec per eV between 100 eV and 100 keV are required to produce 50 eV escape fluxes comparable to those generated by solar EUV.

Swartz, W. E.↗

Effects of secondary electrons from heavy primary cosmic rays in a MWPC hodoscope

A multi-wire proportional counter hodoscope, efficient for both primary track recovery and reading out all wires set by secondary electrons, was flown in a balloon flight experiment covering the range of cosmic ray charge from 4 to 28 and kinetic energy T greater than 0.5 GeV/nucleon. Data on the secondary electron effects in the hodoscope is presented for primary nuclei between C and Fe and kinetic energies between 0.6 and 7.0 GeV/nucleon. The total number of affected anodes in the hodoscope is seen to increase linearly with the cosmic ray change, with a slope that depends strongly on energy over this limited primary energy range.

Derrickson, J. H.↗

Turbojet-exhaust-nozzle secondary-airflow pumping as an exit control of an inlet-stability bypass system for a Mach 2.5 axisymmetric mixed-compression inlet

The throat of a Mach 2.5 inlet that was attached to a turbojet engine was fitted with large, porous bleed areas to provide a stability bypass system that would allow a large, stable airflow range. Exhaust-nozzle, secondary-airflow pumping was used as the exit control for the stability bypass airflow. Propulsion system response and stability bypass performance were obtained for several transient airflow disturbances, both internal and external. Internal airflow disturbances included reductions in overboard bypass airflow, power lever angle, and primary-nozzle area, as well as compressor stall. Nozzle secondary pumping as a stability bypass exit control can provide the inlet with a large stability margin with no adverse effects on propulsion system performance.

Sanders, B. W.↗

Determination of secondary electron emission characteristics of lunar soil samples

A procedure is described for the determination of the 'apparent crossover voltage', i.e. the value of the primary (bombarding) electron energy at which an insulating sample surface changes the average sign of its charge. This apparent crossover point is characteristic of the secondary emission properties of insulating powders such as the lunar soil samples. Lunar core samples from well-defined, distinct soil layers are found to differ significantly in their secondary emission properties. This observation supports the suggestion that soil layers were deposited by an electrostatic transport process.

Gold, T.↗

The secondary circulation associated with a vertically aligned planetary wave critical line

An analytic model of the secondary circulation associated with a vertically aligned, energy absorbing, planetary wave critical line shows that strong zonal mean vertical motions and heating (or cooling) can develop even though no eddy transport of heat occurs. The type of secondary circulation which develops around a vertically aligned critical line may provide a mechanism for stratosphere-troposphere exchange of air. The model predictions are discussed with reference to the 76/77 sudden warming.

Schoeberl, M. R.↗

Secondary electron emission from electrically charged fluorinated-ethylene-propylene Teflon for normal and non-normal electron incidence

The secondary electron emission coefficient was measured for a charged polymer (FEP-Teflon) with normally and obliquely incident primary electrons. Theories of secondary emission are reviewed and the experimental data is compared to these theories. Results were obtained for angles of incidence up to 60 deg in normal electric fields of 1500 V/mm. Additional measurements in the range from 50 to 70 deg were made in regions where the normal and tangential fields were approximately equal. The initial input angles and measured output point of the electron beam could be analyzed with computer simulations in order to determine the field within the chamber. When the field is known, the trajectories can be calculated for impacting electrons having various energies and angles of incidence. There was close agreement between the experimental results and the commonly assumed theoretical model in the presence of normal electric fields for angles of incidence up to 60 deg. High angle results obtained in the presence of tangential electric fields did not agree with the theoretical models.

Budd, P. A.↗

Electron reflection and secondary emission characteristics of sputter-textured pyrolytic graphite surfaces

Low secondary and reflected primary electron emission from the collector electrode surfaces is important for optimum collector efficiency and hence for high overall efficiency of microwave amplifier tubes used in communication satellites and in military systems. Ion sputter texturing of the surface effectively suppresses electron emission from pyrolytic graphite, which is a promising collector electrode material. Secondary and reflected primary electron emission characteristics of sputter textured pyrolytic graphite surfaces with microstructures of various sizes and densities are presented. The microstructure with the lowest electron emission levels, less than those of soot, consists of a dense array of tall, thin spires.

Wintucky, E. G.↗

Secondary Electron Emission Yields

The secondary electron emission (SEE) characteristics for a variety of spacecraft materials were determined under UHV conditions using a commercial double pass CMA which permits sequential Auger electron electron spectroscopic analysis of the surface. The transparent conductive coating indium tin oxide (ITO) was examined on Kapton and borosilicate glass and indium oxide on FED Teflon. The total SEE coefficient ranges from 2.5 to 2.6 on as-received surfaces and from 1.5 to 1.6 on Ar(+) sputtered surfaces with 5 nm removed. A cylindrical sample carousel provides normal incidence of the primary beam as well as a multiple Faraday cup measurement of the approximately nA beam currents. Total and true secondary yields are obtained from target current measurements with biasing of the carousel. A primary beam pulsed mode to reduce electron beam dosage and minimize charging of insulating coatings was applied to Mg/F2 coated solar cell covers. Electron beam effects on ITO were found quite important at the current densities necessary to do Auger studies.

Krainsky, I.↗

Secondary electron emission from a charged dielectric in the presence of normal and oblique electric fields

The secondary electron emission coefficient was obtained for a FEP-Teflon dielectric charged with monoenergetic electrons normally incident upon the surface of the specimen. Measurements of secondary emission coefficient were done for normal and oblique incidence with different primary beam energies in the presence of normal and oblique electric fields. A collimated probing beam was directed to different points on the surface of the specimen and the released or accumulated charge was monitored using an electrometer. The measured data for different probing beam energies, different impact points and different angles of incidence were plotted vs. impact energy and impact point. Data analyzed by computer simulations to find the potential distribution on the surface of the specimen and the electric field around it, is presented and discussed.

Javidi, B.↗

A secondary origin for the central plateau of Hebes Chasma

Hebes Chasma, one of the northern members of the Valles Marineris, can be divided into three physiographic provinces; chasma walls, chasma floor, and central plateau. Theories of origin of the 5-kilometer-high central plateau include (1) the plateau is an eroded remnant of the surrounding plains, and (2) the plateau is a secondary feature deposited after formation of the chasma. A secondary eolian or pyroclastic origin best explains the morphology of the plateau. The chasma probably formed by collapse of a pre-existing graben that was widened by landslides and subsequently filled with eolian or pyroclastic material. Continued mass wasting isolated the plateau from the chasma walls. The enclosed nature of Hebes Chasma may have inhibited eolian erosion and transport within the trough, so that the relatively fresh appearance of the plateau has been preserved.

Peterson, C.↗

Mars weathering analogs - Secondary mineralization in Antarctic basalts

Alkalic basalt samples from Ross Island, Antarctica, are evaluated as terrestrial analogs to weathered surface materials on Mars. Secondary alteration in the rocks is limited to pneumatolytic oxidation of igneous minerals and glass, rare groundmass clay and zeolite mineralization, and hydrothermal minerals coating fractures and vesicle surfaces. Hydrothermal mineral assemblages consist mainly of K-feldspar, zeolites (phillipsite and chabazite), calcite, and anhydrite. Low alteration rates are attributed to cold and dry environmental factors common to both Antarctica and Mars. It is noted that mechanical weathering (aeolian abrasion) of Martian equivalents to present Antarctic basalts would yield minor hydrothermal minerals and local surface fines composed of primary igneous minerals and glass but would produce few hydrous products, such as palagonite, clay or micas. It is thought that leaching of hydrothermal vein minerals by migrating fluids and redeposition in duricrust deposits may represent an alternate process for incorporating secondary minerals of volcanic origin into Martian surface fines.

Berkley, J. L.↗

Experimental study of the effects of secondary air on the emissions and stability of a lean premixed combustor

A study of the effects of secondary air addition on the stability and emissions of a gas turbine combustor has been performed. Tests were conducted with two types of flameholders and varying amounts of dilution air addition. Results indicate that NO(x) decreases with increasing dilution air injection, whereas CO is independent of the amount of dilution air and is related to the gas temperature near the walls. The axial location of the dilution air addition has no effect on the performance or stability. Results also indicate that the amount of secondary air entrained by the flameholder recirculation zone is dependent on the amount of dilution air and flameholder geometry.

Roffe, G.↗

Curved ducts with strong secondary motion - Velocity measurements of developing laminar and turbulent flow

Two orthogonal components of velocity and associated Reynolds stresses are determined in a square-sectioned, 90 degree bend of 2.3 radius ratio by utilizing laser-Doppler velocimetry for Reynolds numbers of 790 and 40,000. Results show that boundary layers at the bend inlet of 0.25 and 0.15 of the hydraulic diameter create secondary velocity maxima of 0.6 and 0.4 of the bulk flow velocity, respectively. It is concluded that the boundary layer thickness is important to the flow development, mainly in the first half of the bend, especially when it is reduced to 0.15 of the hydraulic diameter. Smaller secondary velocities are found for turbulent flow in an identical duct with a radius ratio of 7.0 than in the strongly curved bend, although their effect is more important to the streamwise flow development because of the smaller pressure gradients. In addition, the detail and accuracy of the measurements make them suitable for evaluation of numerical techniques and turbulence models.

Taylor, A. M. K. P.↗