Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SURFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Proton surface exchange kinetics of perovskite triple conducting thin films for protonic ceramic electrolysis cells: BaPr 0.9 Y 0.1 O 3–δ (BPY) vs. Ba 1–x Co 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3–δ (BCFZY)

Protonic ceramic electrolysis cells (PCECs) are an attractive green H 2 production technology, given their intermediate-temperature operating range and ability to produce dry H 2 . However, PCECs will benefit from development of more efficient and durable “triple conducting” anodes where steam is split, H incorporated, and oxygen evolved. In this work, we evaluated the kinetics of the steam-splitting/H incorporation reaction on BaPr 0.9 Y 0.1 O 3–δ (BPY) in comparison to the benchmark Ba 1–x Co 0.4 Fe 0.4 Z r0.1 Y 0.1 O 3–δ (BCFZY) composition, replacing most of the transition metal elements (Co, Fe, Zr) with the lanthanide Pr. We prepared geometrically well-defined perovskite BPY and BCFZY thin films by pulsed laser deposition and performed simultaneous optical transmission relaxation and electrical conductivity relaxation measurements at 400–500 °C in 0.21 atm O 2 during switching of the steam partial pressure to isolate and compare their proton surface exchange coefficients (k). The k values of BPY were comparable to those of BCFZY and more stable over time. According to angle-resolved XPS and STEM-EDS mapping of FIB cross-sections, the surface of BPY exhibited Ba enrichment, Pr deficiency, and Si contamination. In contrast, BCFZY exhibited Ba deficiency throughout, no obvious surface segregation, and less Si contamination. The Ba segregation on the BPY film appears to have promoted steam splitting/H incorporation kinetics even though the more basic surface reacted with the acidic environmental SiO x H y . Faster kinetics observed on stoichiometric BCFZY vs. Ba-deficient BCFZY confirmed the benefit of a high A-site Ba concentration. This result contrasts with most work on perovskites applied in solid oxide electrolysis cell anodes, in which A-site segregation is considered deleterious for surface reaction kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The surface termination of a Fe (III) spin crossover molecular salt

From a comparison of the known molecular stoichiometry and x-ray photoemission spectroscopy, it is evident that the Fe(III) spin crossover salt [Fe(qsal) 2 Ni(dmit) 2 ] has a preferential surface termination with the Ni(dmit) 2 moiety, where qsal = N(8quinolyl)salicylaldimine, and dmit 2- = 1,3-dithiol-2-thione-4,5-dithiolato. This preferential surface termination leads to a significant surface to bulk core level shift for the Ni 2p x-ray photoemission core level, not seen in the corresponding Fe 2p core level spectra. A similar surface to bulk core level shift is seen in Pd 3d in the related [Fe(qsal) 2 ] 2 Pd(dmit) 2 . Inverse photoemission spectroscopy, compared with the x-ray absorption spectra at the Ni-L3,2 edge provides some indication of the density of states resulting from the dmit 2- = 1,3-dithiol-2-thione-4,5-dithiolato ligand unoccupied molecular orbitals and thus supports the evidence regarding surface termination in the Ni(dmit) 2 moiety.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

OH density, flux and loss probability measurements in a room temperature atmospheric pressure surface discharge by microscopic laser induced fluorescence

Many applications involving atmospheric pressure plasma-substrate interactions are enabled by the large fluxes of short-lived reactive species such as OH radicals to the substrate, nonetheless, the accurate measurement of radical densities and fluxes at substrates at atmospheric pressure has received little attention to date, particularly for surface ionization waves. We report the measurement of the OH density distribution in a surface discharge on a fused silica (quartz) substrate generated by an impinging atmospheric pressure plasma jet in dry and humid helium. The OH density is measured by microscopic laser induced fluorescence with a spatial resolution of 10 µm in the direction perpendicular to the quartz substrate. The measured OH diffusive flux varied for the investigated experimental conditions by almost three orders of magnitude and had a maximum value of 1.7 × 10 15 cm -2 s -1 . The corresponding surface loss probability of OH on the quartz surface was determined to be ~0.01. The high spatial resolution was required to accurately resolve the near surface gradient of OH radicals.

plasma-surface interactions↗
DOE OSTI2023

Plasma surface ionization wave interactions with single channels

Abstract The study of plasma surface ionization waves (SIWs) in recent years has primarily focused on planar surfaces and periodic two dimensional structures. In application, substrates are likely to have non-planar morphology such as cracks, pores, and steps. Additionally, targets for the applications of medicine or catalysis may have targets with heterogeneous composition. This classification of targets are brought under the umbrella of complex interfaces. In this work, plasma SIWs were incident on a complex target consisting of a single channel cut into glass slides. The SIW velocities for the in-channel portion of the wave and radially propagating portion of the wave were tracked. It was found that surface wave velocities are not significantly affected by channel geometry, but primarily increase with pulse energy. A third propagation direction for the SIW is characterized in the azimuthal direction relative to the radial portion of the wave. Channel geometry is found to greatly effect the area treated by the plasma but not the propagation velocity of the surface wave. Surface wave morphology and the impact on application is also discussed. A simple model was introduced to understand the mechanisms behind SIW escape from a channel. It was found that the ratio of pulse energy to a geometry dependent minimum energy can predict the escape angle of a SIW from single channels.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Pressure-induced metallization and loss of surface magnetism in FeSi

Single-crystalline FeSi samples with a conducting surface state were studied under high pressure and magnetic field by means of electrical resistance measurements to explore how the bulk semiconducting state and the surface state are tuned by the application of pressure. Here, we found that the energy gap associated with the semiconducting bulk phase begins to close abruptly at a critical pressure of ~10 GPa and the bulk material becomes metallic with no obvious sign of any emergent phases or non-Fermi liquid behavior in temperature dependent electrical resistance in the neighborhood of the critical pressure above 3 K. Moreover, the metallic phase appears to remain at near-ambient pressure upon release of the pressure. Interestingly, the hysteresis in the electrical resistance vs magnetic field curve associated with the magnetically ordered conducting surface state decreases with pressure and vanishes at the critical pressure, while the slope of the electrical resistance vs magnetic field curve, which has a negative value for pressure below the critical pressure, decreases in magnitude with pressure and changes sign at the critical pressure. Thus the conducting surface state and the corresponding two-dimensional magnetic order collapse at the critical pressure where the energy gap of the bulk material starts to close abruptly, revealing the connection between the conducting surface state and the semiconducting bulk state in FeSi.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Reconstructing the reflectivity of liquid surfaces from grazing incidence X-ray off-specular scattering data

The capillary wave model of a liquid surface predicts both the X-ray specular reflection and the diffuse scattering around it. A quantitative method is presented to obtain the X-ray reflectivity (XRR) from a liquid surface through the diffuse scattering data around the specular reflection measured using a grazing incidence X-ray off-specular scattering (GIXOS) geometry at a fixed horizontal offset angle with respect to the plane of incidence. With this approach the entire Q z -dependent reflectivity profile can be obtained at a single, fixed incident angle. This permits a much faster acquisition of the profile than with conventional reflectometry, where the incident angle must be scanned point by point to obtain a Q z -dependent profile. The XRR derived from the GIXOS-measured diffuse scattering, referred to in this paper as pseudo-reflectivity, provides a larger Q z range compared with the reflectivity measured by conventional reflectometry. Transforming the GIXOS-measured diffuse scattering profile to pseudo-XRR opens up the GIXOS method to widely available specular XRR analysis software tools. Here the GIXOS-derived pseudo-XRR is compared with the XRR measured by specular reflectometry from two simple vapor–liquid interfaces at different surface tension, and from a hexadecyltrimethylammonium bromide monolayer on a water surface. For the simple liquids, excellent agreement (beyond 11 orders of magnitude in signal) is found between the two methods, supporting the approach of using GIXOS-measured diffuse scattering to derive reflectivities. Pseudo-XRR obtained at different horizontal offset angles with respect to the plane of incidence yields indistinguishable results, and this supports the robustness of the GIXOS-XRR approach. The pseudo-XRR method can be extended to soft thin films on a liquid surface, and criteria are established for the applicability of the approach.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Surface temperatures reveal the patterns of vegetation water stress and their environmental drivers across the tropical Americas

Vegetation is a key component in the global carbon cycle as it stores ~450 GtC as biomass, and removes about a third of anthropogenic CO2 emissions. However, in some regions, the rate of plant carbon uptake is beginning to slow, largely because of water stress. Here, we develop a new observation-based methodology to diagnose vegetation water stress and link it to environmental drivers. We used the ratio of remotely sensed land surface to near surface atmospheric temperatures (LST/Tair) to represent vegetation water stress, and built regression tree models (random forests) to assess the relationship between LST/Tair and the main environmental drivers of surface energy fluxes in the tropical Americas. We further determined ecosystem traits associated with water stress and surface energy partitioning, pinpointed critical thresholds for water stress, and quantified changes in ecosystem carbon uptake associated with crossing these critical thresholds. Additionally, we found that the top drivers of LST/Tair, explaining over a quarter of its local variability in the study region, are (1) radiation, in 58% of the study region; (2) water supply from precipitation, in 30% of the study region; and (3) atmospheric water demand from vapor pressure deficits (VPD), in 22% of the study region. Regions in which LST/Tair variation is driven by radiation are located in regions of high aboveground biomass or at high elevations, while regions in which LST/Tair is driven by water supply from precipitation or atmospheric demand tend to have low species richness. Carbon uptake by photosynthesis can be reduced by up to 80% in water-limited regions when critical thresholds for precipitation and air dryness are exceeded simultaneously, that is, as compound events. Our results demonstrate that vegetation structure and diversity can be important for regulating surface energy and carbon fluxes over tropical regions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Contributions to the Surface Downwelling Longwave Irradiance during Arctic Winter at Utqiaġvik (Barrow), Alaska

Intrusions of warm, moist air into the Arctic during winter have emerged as important contributors to Arctic surface warming. Previous studies indicate that temperature, moisture, and hydrometeor enhancements during intrusions all make contributions to surface warming via emission of radiation down to the surface. Here, datasets from instrumentation at the Atmospheric Radiation Measurement User Facility in Utqiaġvik (formerly Barrow) for the six months from November through April for the six winter seasons of 2013/14–2018/19 were used to quantify the atmospheric state. These datasets subsequently served as inputs to compute surface downwelling longwave irradiances via radiative transfer computations at 1-min intervals with different combinations of constituents over the six winter seasons. The computed six winter average irradiance with all constituents included was 205.0 W m −2 , close to the average measured irradiance of 206.7 W m −2 , a difference of −0.8%. During this period, water vapor was the most important contributor to the irradiance. The computed average irradiance with dry gas was 71.9 W m −2 . Separately adding water vapor, liquid, or ice to the dry atmosphere led to average increases of 2.4, 1.8, and 1.6 times the dry atmosphere irradiance, respectively. During the analysis period, 15 episodes of warm, moist air intrusions were identified. During the intrusions, individual contributions from elevated temperature, water vapor, liquid water, and ice water were found to be comparable to each other. These findings indicate that all properties of the atmospheric state must be known in order to quantify the radiation coming down to the Arctic surface during winter.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Hyporheic, Floodplain, and Surface Water (on Floodplain and River) Geochemical Datasets, and Shapefiles on Meander C at the East River, Colorado

The purpose of this dataset was to sample surface water and groundwater geochemistry at random locations in the East River, Colorado to provide a broad spatial dataset of geochemistry. The East River is part of the Watershed Function Scientific Focus Area (WFSFA) located in the Upper Colorado River Basin, United States. We conducted this random sampling at multiple time points including during the snowmelt flooding stage, during peak flood, during the falling limb of flood, and during baseflow. This datasets contain many datafiles. We include flat text files of surface water geochemistry including surface water on the floodplain and surface water in the river, geochemistry of floodplain pore-water samples, and geochemistry of hyporheic pore-water samples. All datasets are also included as shapefiles so location geochemistry is co-located with sampling locations and sampling depths. This datasets also has the locations of small channels, and hollows that are on top of floodplain Meander C. These small channels funnel surface water from the hillslope through the floodplain and out to the river. All text datasets can be analyzed with software such as Excel or R. All shapefiles can be viewed with freely available R packages such as Leaflet.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Quantifying the City-Scale Impacts of Impervious Surfaces on Groundwater Recharge Potential: An Urban Application of WRF–Hydro

Decades of urbanization have created sprawling, complex, and vulnerable cities, half of which are located in water-scarce areas. With the looming effects of climate change, including increasing droughts and water shortages, there is an urgent need to better understand how urbanization impacts the water cycle at city scale. Impervious surfaces disrupt the natural flow of water, affecting groundwater recharge in water-scarce cities, such as Los Angeles, looking to harness local water resources. In the face of growing water demand, informing on opportunities to maximize potential groundwater recharge can help increase cities’ resilience. WRF–Hydro, a physics-based hydrological modeling system, capable of resolving atmospheric, land surface, and hydrological processes at city scale, is adapted to represent urban impervious surfaces. The modified model is used to assess the hydrological implications of historical urbanization. Pre- and post-urban scenarios are used to quantify the impacts of impervious surfaces on the local water budget. Our results show that urbanization in LA has vastly decreased the potential for groundwater recharge, with up to half of the water inflow being redirected from infiltration in highly urbanized watersheds, while doubling surface runoff’s share of the city’s water budget, from ~15% to 30%. This study not only sheds light on the role of imperviousness on groundwater recharge in water-scarce cities, but also offers a robust and transferable tool for the management of urban land and water resources.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Surface Atomic Rearrangement with High Cation Ordering for Ultra-Stable Single-Crystal Ni-Rich Co-Less Cathode Materials

It is crucial to minimize cobalt content in Ni-rich layered single-crystal cathodes due to their high price and limited availability, yet it will inevitably lead to cation disordering, capacity degradation, and thermal issues. Herein, to overcome the intrinsic trade-off between performance and composition of Ni-rich Co-less single-crystal cathodes, a precursor engineering strategy with an epitaxially grown cobalt enrichment on the surface is innovatively proposed. In contrast to traditional coating modifications with random orientation and rigid surface-bulk boundary, the epitaxially enriched surface cobalt layer on the precursor undergoes rapid interdiffusion with the internal Ni 3+ during the optimized sintering process. This interdiffusion eliminates the surface-bulk boundary, promoting the uniform distribution of cobalt and synergistically addressing the Li/Ni intermixing. Moreover, an enhanced surface Li + diffusion is obtained, thereby suppressing the Li + concentration gradient and intragranular cracks generation. Consequently, the modified LiNi 0.7 Co 0.07 Mn 0.23 O 2 exhibits impressive cycling stability with increased capacity retention in both coin-type half-cells and pouch-type full-cells (91% after 1000 cycles), even under the harsh condition of high-temperature, surpassing the majority of previously reported Ni-rich cathodes. Finally, this work opens new avenues toward the low cost, high energy density, thermal stability, and long cyclic life for Ni-rich Co-less cathodes and sheds light on large-scale commercial production.

25 ENERGY STORAGE↗
DOE OSTI2022

Regulation of Surface Defect Chemistry toward Stable Ni-Rich Cathodes

Surface reconstruction of Ni-rich layered oxides (NLO) degrades the cycling stability and safety of high-energy-density lithium-ion batteries (LIBs), which challenges typical surface-modification approaches to build a robust interface with electrochemical activity. Here, a strategy of leveraging the low-strain analogues of Li- and Mn-rich layered oxides (LMR) to reconstruct a stable surface on the Ni-rich layered cathodes is proposed. The new surface structure not only consists of a gradient chemical composition but also contains a defect-rich structure regarding the formation of oxygen vacancies and cationic ordering, which can simultaneously facilitate lithium diffusion and stabilize the crystal structure during the (de)lithiation. These features in the NLO lead to a dramatic improvement in electrochemical properties, especially the cyclability under high voltage cycling, exhibiting the 30% increase in capacity retention after 200 cycles at the current density of 1 C (3.0-4.6 V). We report the findings offer a facile and effective way to regulate defect chemistry and surface structure in parallel on Ni-rich layered structure cathodes to achieve high-energy density LIBs.

25 ENERGY STORAGE↗
DOE OSTI2022

How Reproducible are Surface Areas Calculated from the BET Equation?

Abstract Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro‐ and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already‐measured raw adsorption isotherms were provided to sixty‐one labs, who were asked to calculate the corresponding BET areas. This round‐robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well‐known Rouquerol criteria and makes an unambiguous BET area assignment possible.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Resolving the Heat Generated from ZrO 2 Atomic Layer Deposition Surface Reactions

Abstract In situ pyroelectric calorimetry and spectroscopic ellipsometry were used to investigate surface reactions in atomic layer deposition (ALD) of zirconium oxide (ZrO 2 ). Calibrated and time‐resolved in situ ALD calorimetry provides new insights into the thermodynamics and kinetics of saturating surface reactions for tetrakis(dimethylamino)zirconium(IV) (TDMAZr) and water. The net ALD reaction heat ranged from 0.197 mJ cm −2 at 76 °C to 0.155 mJ cm −2 at 158 °C, corresponding to an average of 4.0 eV/Zr at all temperatures. A temperature dependence for reaction kinetics was not resolved over the range investigated. The temperature dependence of net reaction heat and distribution among metalorganic and oxygen source exposure is attributed to factors including growth rate, equilibrium surface hydroxylation, and the extent of the reaction. ZrO 2 ‐forming surface reactions were investigated computationally using DFT methods to better understand the influence of surface hydration on reaction thermodynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The α-WC(0001) Surface as a Hydrogen Sponge: A First Principle Study of H 2 Dissociation and Formation of Low and High Coverages

Tungsten carbide (WC) displays a Pt-like behavior in catalysis, applied in hydrogenation processes. Numerous theoretical studies have modeled the behavior and use of adsorbed hydrogen without obtaining a general picture, missing basic links between H 2 dissociation and generation of high surface coverage (Θ H >0.5 ML). Here, in this study, the capability of C- and W-terminations of the α-WC(0001) surface is analyzed to dissociate several H 2 molecules to produce coverages, Θ H , ranging from low to very high values (0.13<Θ H <2.00 ML). Density functional theory and an ab initio atomistic thermodynamic were used to achieve the conditions for H 2 dissociation. The WC–C surface has higher capacity to dissociate H 2 molecules than WC–W. However, both surfaces can reach full surface coverage, Θ H =1 ML, at mild ambient conditions, T=300 K and P=1 atm, and even up to 500 K at low and high pressures. The H-adatoms on WC–W are more labile than on WC–C. The binding of adsorbates is hindered at high Θ H , implying a need to modulate Θ H according to the application. The results give the basis to understand the capabilities of WC-based catalysts in hydrogenation-related reactions, with the advantage of WC being a hydrogen reservoir at mild practical catalytic conditions.

03 NATURAL GAS↗
DOE OSTI2025

Uncovering the Critical Role of Ni on Surface Lattice Stability in Anionic Redox Active Li 1.2 Ni 0.2 Mn 0.6 O 2

Anionic redox reaction (ARR) can provide extra capacity beyond transition metal (TM) redox in lithium-rich TM oxide cathodes. Practical ARR application is much hindered by the structure instability, particularly at the surface. Oxygen release has been widely accepted as the ringleader of surficial structure instability. However, the role of TM in surface stability has been much overlooked, not to mention its interplay with oxygen release. Herein, TM dissolution and oxygen release are comparatively investigated in Li 1.2 Ni 0.2 Mn 0.6 O 2 . Ni is verified to detach from the lattice counter-intuitively despite the overwhelming stoichiometry of Mn, facilitating subsequent oxygen release of the ARR process. Intriguingly, surface reorganization occurs following regulated Ni dissolution, enabling the stabilization of the surface and elimination of oxygen release in turn. Accordingly, a novel optimization strategy is proposed by adding a relaxation step at 4.50 V within the first cycle procedure. Battery performance can be effectively improved, with voltage decay suppressed from 3.44 mV/cycle to 1.60 mV/cycle, and cycle stability improved from 66.77% to 90.01% after 100 cycles. This work provides new perspectives for clarifying ARR surface instability and guidance for optimizing ARR performance.

25 ENERGY STORAGE↗
DOE OSTI2022

Molecular Functionalization of Semiconductor Surfaces

The presence of molecules on semiconductor surfaces can have a profound impact on their properties and applications in solar energy conversion. In this chapter we discuss the methods used to effect functionalization of semiconductor surfaces with molecular dipoles and catalysts. A major focus is the energetic impacts such molecules have to the fields at the semiconductor|contact interface. These field modulations are strongly dependent on the nature of the surface-bound molecule including its dipole moment and orientation as well as the distance of the dipole from the semiconductor surface. The contacting phase also has a strong impact on the energetics, since ions in the liquid electrolytes relevant to inorganic photochemistry partially screen dipolar effects at the surface. In addition to detailed description of these fundamentals, we present the history of this field as well as state-of-the-art chemistries that leverage the preceding decades of knowledge to impart the molecular interfacial layer with dynamic properties such as light absorption and catalysis. The challenges of establishing stable molecular attachment schemes at semiconductor|electrolyte interfaces are interwoven throughout the chapter. We conclude with a prognosis and future outlook that we hope will be a useful guide to those interested in developing the next generation of molecular chemistries at photoelectrode interfaces.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,I↗
DOE OSTI2020

Surface engineering to enhance heat generation and joint strength in dissimilar materials AZ31 and DP590 ultrasonic welding

A multiscale simulation approach was developed and employed to optimize the sheet surface conditions for higher interfacial temperature and joint strength in ultrasonic welding of magnesium alloy AZ31 and dual-phase steel DP590. First, a mesoscale model was used to study the relationship between friction coefficient and surface roughness, which can be modified by various engineering methods. Then a macroscopic process model was employed to study the effects of surface roughness on heat generation, indicating that a temperature increase can be achieved with rougher surfaces on two sides of both DP590 and AZ31 sheets. Samples prepared by sanding and filing, as well as grinding, were first characterized for surface roughness and then welded under ultrasonic vibration. An infrared camera was used to measure temperatures in situ for model validation. Overall, lap shear test results for the welded joint showed that the joint strength can be improved by 10~25% using filing and round grinding methods as a result of the enhanced heat generation and mechanical interlocking on the interface.

42 ENGINEERING↗