Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STREAM FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Development of a Wave Energy-Responsive Self-Actuated Blade Articulation Mechanism for an OWC Turbine- Prototype Fabrication and Wind Tunnel Lab Test

The Phase I SBIR effort completed the feasibility design, fabrication, and wind tunnel testing of a self-actuated blade articulation mechanism that uses a torsion bar and a lightweight airfoil to affect the articulation of the Wells airfoil. The articulation is affected only by the air stream incident on the airfoil. The self-actuating blade eliminates the complex and costly linkage mechanism that is now needed to perform this function on either a variable pitch Wells-type or Dennis-Auld air turbine. Using the results reported by independent researchers, the projected improvement in the Wells-type turbine efficiency is 20-40%, in addition to an increase in the operating air flow range by 50-100%, therefore enabling a smaller or slower single turbine to be used.

16 TIDAL AND WAVE POWER↗

SPECs Early-Stage Decision Model: User Manual

The SPECs Early-Stage Decision (ESD) model is central to the SPECs procurement solutions toolkit. The ESD model is an Excel-based spreadsheet model, which provides information about the economic and strategic value of a proposed battery-storage project or solar-plus-storage (solar-plus) project. The model can be used to explore combinations of storage-related project value streams in order to define a potential project, while educating co-op decision-makers about project benefits and costs. A sensitivity analysis function speeds the development of "what-if" scenarios. A gap analysis function solves for top-priority metrics and supports the inclusion of hard-to-monetize strategic values, such as the value of storage to defer costly system upgrades in light of increasing distributed solar and other distributed energy resources (DERs). Model outputs include the utility data, assumptions, and use-case scenarios that are recommended content for the requests for proposals (RFPs). The model may also provide an initial "sanity check" for RFP responses, supporting further discussions among utility staff, vendors and stakeholders. The ESD is not a "finance-grade" modeling tool, and users are cautioned to be mindful of its limitations, but the model has been reviewed by users, who recommend it as a way to drive faster and better project design and planning, as well as to facilitate better communications with vendors, grid partners, and stakeholders.

14 SOLAR ENERGY↗

A Hybrid Energy System Workflow for Energy Portfolio Optimization

This manuscript develops a workflow, driven by data analytics algorithms, to support the optimization of the economic performance of an Integrated Energy System. The goal is to determine the optimum mix of capacities from a set of different energy producers (e.g., nuclear, gas, wind and solar). A stochastic-based optimizer is employed, based on Gaussian Process Modeling, which requires numerous samples for its training. Each sample represents a time series describing the demand, load, or other operational and economic profiles for various types of energy producers. These samples are synthetically generated using a reduced order modeling algorithm that reads a limited set of historical data, such as demand and load data from past years. Numerous data analysis methods are employed to construct the reduced order models, including, for example, the Auto Regressive Moving Average, Fourier series decomposition, and the peak detection algorithm. All these algorithms are designed to detrend the data and extract features that can be employed to generate synthetic time histories that preserve the statistical properties of the original limited historical data. The optimization cost function is based on an economic model that assesses the effective cost of energy based on two figures of merit: the specific cash flow stream for each energy producer and the total Net Present Value. An initial guess for the optimal capacities is obtained using the screening curve method. The results of the Gaussian Process model-based optimization are assessed using an exhaustive Monte Carlo search, with the results indicating reasonable optimization results. The workflow has been implemented inside the Idaho National Laboratory’s Risk Analysis and Virtual Environment (RAVEN) framework. The main contribution of this study addresses several challenges in the current optimization methods of the energy portfolios in IES: First, the feasibility of generating the synthetic time series of the periodic peak data; Second, the computational burden of the conventional stochastic optimization of the energy portfolio, associated with the need for repeated executions of system models; Third, the inadequacies of previous studies in terms of the comparisons of the impact of the economic parameters. The proposed workflow can provide a scientifically defendable strategy to support decision-making in the electricity market and to help energy distributors develop a better understanding of the performance of integrated energy systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Feautrier solution of the electron transport equation

An efficient, accurate, and stable solution to the electron transport problem is presented. The two-stream approximation is discussed in detail, but the solution is developed for the general multistream case. Applied to the photoelectron problem, it is shown that accurate escape fluxes are obtained using only 10 altitudes distributed over the region 100 - 1000 km. The local equilibrium, two-stream, and multistream solutions to the photoelectron problem are compared. In addition, a recursion relation for the moments of the elastic angular scattering phase function is presented.

Link, R.↗

Mestastable State Population in Laser Induced Plasmas

Laser induced plasma has been used as a source of neutrals and ions in the study of astrophysical plasmas. The purity of state of this source is essential in the determination of collision parameters such as the charge transfer rate coefficients between ions and neutrals. We will show that the temperature of the laser induced plasma is a rapidly decreasing function of time. The temperature is initially high but cools off rapidly through collisions with the expanding plasma electrons as the plasma recombines and streams into the vacuum. This rapid expansion of the plasma, similar to a supersonic jet, drastically lowers the internal energy of the neutrals and ions.

Kwong, V. H. S.↗

A Proton-Cyclotron Wave Storm Generated by Unstable Proton Distribution Functions in the Solar Wind

We use audification of 0.092 seconds cadence magnetometer data from the Wind spacecraft to identify waves with amplitudes greater than 0.1 nanoteslas near the ion gyrofrequency (approximately 0.1 hertz) with duration longer than 1 hour during 2008. We present one of the most common types of event for a case study and find it to be a proton-cyclotron wave storm, coinciding with highly radial magnetic field and a suprathermal proton beam close in density to the core distribution itself. Using linear Vlasov analysis, we conclude that the long-duration, large-amplitude waves are generated by the instability of the proton distribution function. The origin of the beam is unknown, but the radial field period is found in the trailing edge of a fast solar wind stream and resembles other events thought to be caused by magnetic field footpoint motion or interchange reconnection between coronal holes and closed field lines in the corona.

instabilities - plasmas↗

High Energy Cutting and Stripping Utilizing Liquid Nitrogen

The Aerospace Industry has endeavored for decades to develop hybrid materials that withstand the rigors of mechanized flight both within our atmosphere and beyond. The development of these high performance materials has led to the need for environmentally friendly technologies for material re-work and removal. The NitroJet(TM) is a fluid jet technology that represents an evolution of the widely used, large-scale water jet fluid jet technology. It involves the amalgamation of fluid jet technology and cryogenics technology to create a new capability that is applicable where water jet or abrasive jet (water jet plus entrained abrasive) are not suitable or acceptable because of technical constraints such as process or materials compatibility, environmental concerns and aesthetic or legal requirements. The NitroJet(TM) uses ultra high-pressure nitrogen to cut materials, strip numerous types of coatings such as paint or powder coating, clean surfaces and profile metals. Liquid nitrogen (LN2) is used as the feed stream and is pressurized in two stages. The first stage pressurizes sub cooled LN2 to an intermediate pressure of between 15,000 and 20,000 psi at which point the temperature of the LN2 is about -250 F. The discharge from this stage is then introduced as feed to a dual intensifier system, which boosts the pressure from 15,000 - 20,000 psi up to the maximum operating pressure of 55,000 psi. A temperature of about -220 F is achieved at which point the nitrogen is supercritical. In this condition the nitrogen cuts, strips and abrades much like ultra high-pressure water would but without any residual liquid to collect, remove or be contaminated. Once the nitrogen has performed its function it harmlessly flashes back into the atmosphere as pure nitrogen gas. The system uses heat exchangers to control and modify the temperature of the various intake and discharge nitrogen streams. Since the system is hydraulically operated, discharge pressures can be easily varied over a very wide range providing considerable flexibility for various operations. The NitroJet(TM) is an advance on the nitrogen fluid jet technology initially developed at the Idaho National Engineering Laboratory in Idaho Falls, Idaho. NitroCision(R) first introduced the NitroJet(TM) into a commercial setting in 2003 and there has been considerable interest from many diverse sectors of government and industry since then. While the current system is an industrial system with the size and mass normally associated with industrial applications, a smaller system that is much more compact is being contemplated for those applications that do not need the full capabilities of the larger system. The NitroJet(TM) can be deployed as a fixed or mobile system with multiple end effectors capable of cutting, stripping, cleaning, and surface profiling either in robotic or manual applications.

Hume, Howard↗

Aging studies of Dual functional materials for CO 2 direct air capture with in situ methanation under simulated ambient conditions: Ru thrifting for cost reduction

Dual function materials (DFMs) comprised of 0.25 %Ru, 6.1 %Na 2 O/γ-Al 2 O 3 //monolith were evaluated for about 250 hours time-on-stream (TOS) at various simulated ambient climate capture conditions followed by temperature swing methanation to 280 °C. Herein this paper focuses on the impact of thrifting Ru to low levels and the impact on performance. Results showed both stable CO 2 capture capacity and CH 4 production with 0.25 % Ru DFM deposited on a ceramic monolith. The CO 2 conversion to CH 4 production was decreased slightly by the Ru decrease from 1 % to 0.25 %. The capture capacity decreased since a lower Ru content reduces the complete decomposition of the Na 2 CO 3 precursor producing fewer active adsorption sites (“Na 2 O”). The deployment of a low Ru DFM monolith would significantly decrease the overall capital cost and give more potential for a large-scale direct air capture and methanation (DACM) application.

03 NATURAL GAS↗

Fabrics coated with lubricated nanostructures display robust omniphobicity

The development of a stain-resistant and pressure-stable textile is desirable for consumer and industrial applications alike, yet it remains a challenge that current technologies have been unable to fully address. Traditional superhydrophobic surfaces, inspired by the lotus plant, are characterized by two main components: hydrophobic chemical functionalization and surface roughness. While this approach produces water-resistant surfaces, these materials have critical weaknesses that hinder their practical utility, in particular as robust stain-free fabrics. For example, traditional superhydrophobic surfaces fail (i.e., become stained) when exposed to low-surface-tension liquids, under pressure when impacted by a high-velocity stream of water (e. g., rain), and when exposed to physical forces such as abrasion and twisting. We have recently introduced slippery lubricant-infused porous surfaces (SLIPS), a self-healing, pressure-tolerant and omniphobic surface, to address these issues. Herein we present the rational design and optimization of nanostructured lubricant-infused fabrics and demonstrate markedly improved performance over traditional superhydrophobic textile treatments: SLIPS-functionalized cotton and polyester fabrics exhibit decreased contact angle hysteresis and sliding angles, omni-repellent properties against various fluids including polar and nonpolar liquids, pressure tolerance and mechanical robustness, all of which are not readily achievable with the state-of-the-art superhydrophobic coatings.

Shillingford, C↗

Advances in PFAS Monitoring and Remediation Using a Functionalized Material Approach - 20080

The growing global concerns about the effects to public health from human exposure to per- and polyfluoroalkyl substances (PFAS) motivates the development of strategies for reliable monitoring of PFAS in environmental streams, as well as for their rapid, effective removal if detected. For the continuous PFAS monitoring, an inexpensive, field-deployable, in situ sensor is urgently needed; yet the prevalent in situ techniques often struggle to strike a balance between the practical sensitivity and selectivity demands of the real world. Similarly, for effective PFAS removal, strategies for their fast, selective, and quantitative capture are desired, yet the present commercially available sorbents are unable to meet the requirements of rapid, quantitative capture of all PFAS components, and are notably inefficient in removing the more toxic smaller chains. To address these twin challenges, Pacific Northwest National Laboratory is developing strategies for improved detection and remediation of PFAS. For the rapid, selective, quantitative removal of PFAS from environmental streams, the strategy relies on designing capture probes with exclusively tailored electronic and spatial affinities for the PFAS that are able to selectively capture them from environmental streams. For the in situ detection and quantification of PFAS in complex, multicomponent matrices such as groundwater, the approach relies on the targeted capture of specific PFAS by these PFAS-specific capture probes immobilized on a platform. The platform acts as an electrode to directly measure PFAS concentration through a proportional change in electrical response upon their capture. A combination of optimization of platform design and incorporation of additional, sensitive detection modalities have allowed us to achieve detection limits as low as 0.5 ng/L for detection of PFAS compounds (compared to the 70 ng/L Health Advisory Limit of the U.S. Environmental Protection Agency). (authors)

47 OTHER INSTRUMENTATION↗

Orbital transfer vehicle concept definition and system analysis study, 1985. Volume 5: Work breakdown structure and dictionary

To establish consistency and visibility within the Orbital Transfer Vehicle (OTV) program, a preliminary work breakdown structure (WBS) and dictionary were developed. The dictionary contains definitions of terms to be used in conjunction with the WBS so that a clear understanding of the content of the hardware, function, and cost elements may be established. The OTV WBS matrix is a two-dimensional structure which shows the interrelationship of these dimensions: the hardware elements dimension and the phase and function dimension. The dimension of time cannot be shown graphically, but must be considered. Each cost entry varies with time so that it is necessary to know these cost values by year for budget planning and approval as well as for establishing cost streams for discounting purposes in the economic analysis. While a multiple dimensional approach may at first appear complex, it actually provides benefits which outweigh any concern. This structural interrelationship provides the capability to view and analyze the OTV costs from a number of different financial and management aspects. Cost may be summed by hardware groupings, phases, or functions. The WBS may be used in a number of dimensional or single listing format applications.

Nelson, James H.↗

NO2 Aging and Iodine Loading of Silver-Functionalized Aerogels

Off-gas treatment systems in used fuel reprocessing which use fixed-bed adsorbers are typically designed to operate for an extended period of time before replacement or regeneration of the adsorbent. During this time, the sorbent material will be exposed to the off-gas stream. Exposure could last for months, depending on the replacement cycle time. The gas stream will be at elevated temperature and will possibly contain a mixture of water vapor, NOx, nitric acid vapors, and a variety of other constituents in addition to the radionuclides of capture interest. A series of studies were undertaken to evaluate the effects of long-term exposure, or aging, on proposed iodine sorbent materials under increasingly harsh off-gas conditions. Previous studies have evaluated the effects of up to 6 months of aging under dry air and under humid air conditions on the iodine loading behavior of Ag0-functionalized aerogels. This study examines the effects of extended exposure (up to 6 months) to NO2 on the iodine loading capacity of Ag0- functionalized aerogels. Material aged for 1 and 2 months appeared to have a similar total loading capacity to fresh material. Over an aging period of 4 months, a loss of approximately 15% of the total iodine capacity was seen. The iodine capacity loss on silver-functionalized aerogels due to NO2 was smaller than the iodine capacity loss due to humid or dry air aging.

Patton, K K↗

Characterization of Bypass Fluid Flow in an Active Magnetic Regenerative Liqueer

Active magnetic regenerators (AMR) with second order magnetocaloric materials operating below the Curie temperature have a unique property where the magnetized specific heat is lower than the demagnetized specific heat. The associated thermal mass unbalance allows a fraction of heat transfer fluid in the cold heat exchanger to bypass the magnetized regenerator. This cold bypassed fluid can precool a process stream as it returns to the hot side, thereby increasing the efficiency of liquefaction and reducing the cost of liquid cryogens. While researchers have been aware of this phenomenon for decades, experimental performance improvements from bypass fluid flow have yet to be reported in open literature. In the present work, the net cooling power of an active magnetic regenerative liquefier is investigated as a function of the bypass ow fraction. Experiments are performed at a fixed temperature span that yield a 25% improvement in net cooling power, affirming the potential of bypass cooling power.

active magnetic regenerator, hydrogen, liquefacati↗

Long non-coding RNA FLVCR1-AS1 contributes to the proliferation and invasion of lung cancer by sponging miR-573 to upregulate the expression of E2F transcription factor 3

Lung cancer is one of the most common causes of cancer-related death all over the world. In recent years, long non-coding RNAs (lncRNAs) have been reported to play critical roles in the development and progression of human malignancies. In the present study, we aimed to study the role and mechanism of FLVCR1-AS1 in human non-small cell lung cancer (NSCLC). Results revealed that FLVCR1-AS1 was markedly upregulated in NSCLC tissues and cell lines. Knockdown of FLVCR1-AS1 significantly inhibited the proliferation, migration, invasion and promoted apoptosis of NSCLC cells, and suppressed tumor growth of NSCLC in vivo. Moreover, we explored regulatory mechanism, and found that FLVCR1-AS1 functioned as a competing endogenous RNA (ceRNA) by directly binding to miRNA-573, and E2F transcription factor 3 (E2F3) was identified as a down-stream target of miR-573. FLVCR1-AS1 positively regulated E2F3 expression through inhibiting miR-573 in NSCLC cells. Our findings suggested that FLVCR1-AS1/miR-573/E2F3 axis was an important signaling pathway in mediating tumorigenesis and progression of NSCLC, and further indicated that FLVCR1-AS1 could be a novel diagnostic biomarker and therapeutic target for NSCLC.

60 APPLIED LIFE SCIENCES↗

Revised Knudsen-layer reduction of fusion reactivity

Recent work by Molvig et al. [Phys. Rev. Lett. 109, 095001 (2012)] examined how fusion reactivity may be reduced from losses of fast ions in finite assemblies of fuel. In this paper, this problem is revisited with the addition of an asymptotic boundary-layer treatment of ion kinetic losses. This boundary solution, reminiscent of the classical Milne problem from linear transport theory, obtains a free-streaming limit of fast ion losses near the boundary, where the diffusion approximation is invalid. Thermonuclear reaction rates have been obtained for the ion distribution functions predicted by this improved model. It is found that while Molvig's “Knudsen distribution function” bounds from above the magnitude of the reactivity reduction, this more accurate treatment leads to less dramatic losses of tail ions and associated reduction of thermonuclear reaction rates for finite fuel volumes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

TWO-STREAM-LIKE INSTABILITY IN DILUTE HOT RELATIVISTIC BEAMS AND ASTROPHYSICAL RELATIVISTIC SHOCKS

Relativistic collisionless shocks are believed to be efficient particle accelerators. Nonlinear outcome of the interaction of accelerated particles that run ahead of the shock, the so-called precursor, with the unperturbed plasma of the shock upstream, is thought to facilitate additional acceleration of these particles and to possibly modify the hydrodynamic structure of the shock. We explore here the linear growth of kinetic modes appearing in the precursor-upstream interaction in relativistic shocks propagating in non- and weakly magnetized plasmas: electrostatic two-stream parallel mode and electrostatic oblique modes. The physics of the parallel and oblique modes is similar, and thus, we refer to the entire spectrum of electrostatic modes as 'two-stream-like'. These modes are of particular interest because they are the fastest growing modes known in this type of system. Using a simplified distribution function for a dilute ultrarelativistic beam that is relativistically hot in its own rest frame, yet has momenta that are narrowly collimated in the frame of the cold upstream plasma into which it propagates, we identify the fastest growing mode in the full k-space and calculate its growth rate. We consider all types of plasma (pairs and ions-electrons) and beam (charged and charge-neutral). We find that unstable electrostatic modes are present in any type of plasma and for any shock parameters. We further find that two modes, one parallel (k{sub perpendicular} = 0) and the other one oblique (k{sub perpendicular} {approx} k{sub ||}), are competing for dominance and that either one may dominate the growth rate in different regions of the phase space. The dominant mode is determined mostly by the perpendicular spread of the accelerated particle momenta in the upstream frame, which reflects the shock Lorentz factor. The parallel mode becomes more dominant in shocks with lower Lorentz factors (i.e., with larger momentum spreads). We briefly discuss possible implications of our results for external shocks in gamma-ray burst sources.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluating the Long-Term Ecological Responses to Riparian Ecosystem Restoration at the Fort Benning, Georgia Military Installation

Riparian and instream restorations are commonly implemented to improve ecosystem condition. However, very few restoration activities are monitored for multiple years to assess long-term effectiveness. At the Department of Defense’s Fort Benning Military Installation (FBMI) in west-central Georgia, two experimental restoration projects (ephemeral drainage revitalization and instream habitat augmentation [i.e., coarse woody debris (CWD) additions]) were implemented ~14 years ago with the goal of reducing environmental impacts of military training activities. A SERDP project found that instream restoration improved some aspects of ecosystem function and community structure but not others. The objective of the current study was to re-evaluate the effect of these restoration practices on stream ecosystem processes ~14 years after implementation.

54 ENVIRONMENTAL SCIENCES↗

Effect of Feed Solids Content on LAW Melt Processing

The primary objective of this work was to collect data to support processing of Hanford LAW over a range of feed solids contents, extending both higher and lower than the present WTP baseline. Processing LAW at higher solids content has the potential to increase throughput and reduce the time required to process the inventory of LAW waste. Processing some LAW streams at lower than the WTP baseline solids contents may be a required condition for the direct feed approach due to the more limited pretreatment functionality and evaporation capability. A high waste loading glass formulation developed in earlier work for an LAW composition specified by ORP was used for this work. The glass composition selected for testing is ORPLA20, which is based on LAW tank AN-105; the glass has a waste loading of 31.4 wt% and an Na2O content of 24.0 wt%.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗