Multiple scattering in the Kapitza-Dirac effect.
Multiple scattering in Kapitza-Dirac effect describing electron scattering by standing electromagnetic wave, noting transition probability less than unity
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Multiple scattering in Kapitza-Dirac effect describing electron scattering by standing electromagnetic wave, noting transition probability less than unity
Simultaneous observations of Pc 3, 4, 5 pulsations by five satellites in the pre-noon local time sector at and near synchronous orbit are examined. The periods of these simultaneous pulsations are not the same at the different observation points. This difference is attributed to site dependent resonant conditions. The spatial properties of the temporal phenomenon are demonstrated with observations by ISEE-1 and -2 as they pass through oscillations in a spatially limited region. Fundamental and second harmonic standing Alfven waves are observed simultaneously on the same field line. The periods are consistent with model predictions when the measured plasma composition, which by mass consists mainly of singly ionized oxygen, is taken into account.
The drop dynamics module is a Spacelab-compatible acoustic positioning and control system for conducting drop dynamics experiments in space. It consists basically of a chamber, a drop injector system, an acoustic positioning system, and a data collection system. The principal means of collecting data is by a cinegraphic camera. The drop is positioned in the center of the chamber by forces created by standing acoustic waves generated in the nearly cubical chamber (about 12 cm on a side). The drop can be spun or oscillated up to fission by varying the phse and amplitude of the acoustic waves. The system is designed to perform its experiments unattended, except for start-up and shutdown events and other unique events that require the attention of the Spacelab payload specialist.
Power spectra of magnetic pulsations observed at synchronous orbit by the ATS 6 satellite often show several spectral peaks simultaneously. Such pulsations, called harmonic events because of the nearly constant separation between successive peaks, are continuously observed in the dayside in the Pc 3-4 frequency range (6.6-100 mHz). The harmonic events are seen clearly only in the east-west magnetic field component. The spectral peaks are regularly spaced with a typical minimum separation of 14 mHz in the morning gradually decreasing to 10 mHz in the afternoon. In the dynamic spectra of harmonic events, the fundamental mode is usually absent. In addition, the relative amplitudes of the higher harmonics depend on the magnetic latitude. These observed features can be explained by a standing Alfven wave consisting of many discrete harmonic frequencies. A statistical analysis of power spectra demonstrates that at least 10-30% of Pc 3 pulsations can be classified as harmonic events. For a selected event on August 7, 1975, the plasma mass density at the synchronous orbit is estimated to be 3-8 hydrogen mass/cu cm.
The effect of a standing shock wave on the static and dynamic aeroelastic stability of a flexible panel is investigated using a linear structural and aerodynamic theoretical model. It is found that the shock is generally stabilizing. The lowest critical dynamic pressures are associated with shock positions downstream from the panel, where the panel is uninfluenced by the shock.
Harmonically related Pc 3-4 pulsations (7-100 mHz) are observed simultaneously by the three geosynchronous satellites ATS 6, SMS 1, and SMS 2, which are separated 20 deg from one another. At a given instant the frequency of the same harmonic is different from one spacecraft to another and each spacecraft observes a decrease in the fundamental frequency as it moves from morning (15 mHz) to afternoon (10 mHz). This frequency behavior is explained in terms of standing Alfven waves, for which the frequency is determined by the local magnetic field and plasma density. Occurrence of harmonic Pc 3-4 waves only during daytime hours (0400-2000 LT) and their frequency characteristics suggest a broadband energy source located on the dayside. Possible azimuthal wave number m and azimuthal phase velocity V(phi) of the second through fourth harmonics are determined from an unusual interval during which identical harmonic frequencies were observed at SMS 1 and ATS 6. Under the assumption of tailward propagation of constant-phase fronts at the same velocity for all these harmonics, V(phi) of about 1700 km/s is obtained.
Observations of interplanetary shocks with multiple spacecraft and multiple instruments has permitted the determination of their average shock normals with unprecedented accuracy. Nevertheless, there are still local deviations from the best-fit normal. These deviations in general appear to be less than 5 deg but on occasion can be of the order of 20 deg or more. These fluctuating normals and the fluctuating upstream field can cause variations in the downstream field strength even when the upstream field strength is constant. This behavior has important consequences for the appearance of quasi-parallel shocks. Precursor waves which stand on the shock ramp and do not propagate or are not convected across the shock front do not affect the downstream field.
Amorphous metals are produced by forming a molten unit of metal and deploying the unit into a bidirectional acoustical levitating field or by dropping the unit through a spheroidizing zone, a slow quenching zone, and a fast quenching zone in which the sphere is rapidly cooled by a bidirectional jet stream created in the standing acoustic wave field produced between a half cylindrical acoustic driver and a focal reflector or a curved driver and a reflector. The cooling rate can be further augmented first by a cryogenic liquid collar and secondly by a cryogenic liquid jacket surrounding a drop tower. The molten unit is quenched to an amorphous solid which can survive impact in a unit collector or is retrieved by a vacuum chuck.
A simple, two-dimensional, spectral model of heat transport in the Venus ionosphere has been constructed. Numerical experiments with the model suggest that a nocturnal heat source about an order of magnitude smaller than the daytime source is required to simulate the observed ion and electron temperatures. The solar zenith angle dependence of the high-altitude ion temperature appears to be caused by expansion followed by compression of the plasma as it flows from the dayside to the nightside. Thermal-flux saturation appears to be significant on the nightside, but the formation of a standing shock wave does not seem to be required to explain the broad features of the observed, nocturnal ion temperature.
This paper describes the development of the analysis of the transient dynamic response of a bladed disk on a flexible rotor. The rotating flexible bladed disk is considered as a module in a complete turbine engine structure. The analysis of the flexible bladed disk (FBD) module is developed for the non-equilibrated one-diameter axial mode. The FBD motion is considered as a sum of two standing axial waves constrained to the rotor. The FBD is coupled inertially and gyroscopically to its rotor support, and indirectly through connecting elements, to the adjacent rotor and/or other supporting structures. Incorporated in the basic Turbine Engine Transient Response Analysis program (TETRA), the FBD module is demonstrated with a two-rotor model where the FBD can be excited into resonance by an unbalance in the adjacent rotor and at a frequency equal to the differential rotor speed. The FBD module also allows the analysis of two flexible bladed disks in the same rotor.
In a three-part series of papers, a generalized finite element solution strategy is developed to handle traveling load problems in rolling, moving and rotating structure. The main thrust of this section consists of the development of three-dimensional and shell type moving elements. In conjunction with this work, a compatible three-dimensional contact strategy is also developed. Based on these modeling capabilities, extensive analytical and experimental benchmarking is presented. Such testing includes traveling loads in rotating structure as well as low- and high-speed rolling contact involving standing wave-type response behavior. These point to the excellent modeling capabilities of moving element strategies.
Magnetic field data acquired by the AMPTE CCE satellite from L = 2-6 are analyzed. A procedure was specially developed to reduce the artificial modulation and noise in magnetic field measurements, making it possible to detect Pc 3-4 pulsations with amplitudes only 1 nT or less, even for L values less than 3. A survey of 41 CCE passes in L = 2-6 and in the postnoon sector showed that the most commonly observed pulsations in this region were the east-west oscillations of magnetic field with clearly L-dependent frequencies; these are identified as the toroidal mode standing Alfven waves. A relationship was found between the pulsation frequency and plasma density, showing that the pulsation data can be used to estimate the plasma mass density in the inner magnetosphere.
Significant improvement has been obtained in the numerical performance of a Monte Carlo scheme for the analysis of nonequilibrium gas dynamics through an implementation of the algorithm which takes advantage of vector hardware, as presently demonstrated through application to three different problems. These are (1) a 1D standing-shock wave; (2) the flow of an expanding gas through an axisymmetric nozzle; and (3) the hypersonic flow of Ar gas over a 3D wedge. Problem (3) is illustrative of the greatly increased number of molecules which the simulation may involve, thanks to improved algorithm performance.
Results of a study of satellite and ground-based data acquired near the dayside cusp during a period when the IMF was inferred to have a strong northward component are presented. The presence of Pc 1 bursts, Pc 4-5 pulsations, and a tailward traveling twin vortex pattern of ionospheric convection suggests that the magnetosphere may have been temporarily compressed. Magnetic field data acquired at a synchronous altitude from GOES 5 and on the ground from Huanacayo support this suggestion. Plasma with ion dispersion characteristics associated with a cusp during southward IMF was detected by Viking over a 3.5-deg range of latitude. The presence of standing Alfven waves and ring current ions suggests that this 'cusplike' plasma was observed on closed geomagnetic field lines. It is suggested that the magnetosphere, during a northward IMF, is temporarily compressed by a solar wind pressure enhancement that produces the Pc 1 bursts, Pc 4-5 pulsations, and ionospheric vortices.
Experiments were conducted in air, CO2, and CO2-argon gas mixtures to obtain heating distribution data over a 140 deg blunt cone with various corner radii. The effect of corner radius on the heating distribution over the forebody of the cone was included in the investigation. These experiments provide data for validation of two-dimensional axisymmetric and three-dimensional Navier-Stokes solutions. Heating distribution data and measured bow shock wave stand-off distances for 0 deg angle of attack were compared with predicted values using a two-dimensional axisymmetric Navier-Stokes code.
Supersonic combustion ramjet (scramjet) engines rely on rapid mixing and combustion of fuel for good performance. However, both of these processes are relatively slow compared to the residence times in supersonic combusters. Methods of improving the mixing process include subjecting the fuel streams to shock waves and the generation of vortices by spiriling, bifurcating struts. The combustion process can also be enhanced by shock or detonation waves. An oblique shock wave can act as a flameholder by increasing the pressure and temperature of the air-fuel mixture and thereby decreasing the ignition delay. If the oblique shock is sufficiently strong, then the combustion front and the shock wave can couple into a detonation wave. In this case, combustion occurs almost instantaneously in a thin zone behind the wave front. While the existence of standing oblique detonation waves has been proven in computer simulations, the experimental validation is still in progress. Currently, there is an experimental and analytical program at NASA-Ames Research Center to study detonations and other means of wave enhanced supersonic mixing and combustion.
On January 28, 1990, the Dynamic Explorer 1 (DE-1) and Akebono satellites crossed a magnetic field structure at the equatorward edge of the polar cusp at altitudes od 22,000 and 5000 km, respectively, within 6 min of each other. Locally measured plasma particles and fields and magnetometer data from a ground station near the foot of the magnetic field line are more consistent with an interpretation of the structure as that of a standing Alfven wave than that of a quasi-steady field-aligned current sheet. We discuss the observations supporting this conclusion and other related observations of field-aligned currents, Alfven waves, and ion energization near the equatorward edge of the cusp. These observations suggest that Alfven waves are commonly present near the equatorward edge of the cusp.
An acousto-electric levitator has been developed to study the behavior of liquid drop and solid particle clusters and arrays. Unlike an ordinary acoustic levitator that uses only a standing acoustic wave to levitate a single drop or particle, this device uses an extra electric static field and the acoustic field simultaneously to generate and levitate charged drops in two-dimensional arrays in air without any contact to a solid surface. This cluster and array generation (CAG) instrument enables us to steadily position drops and arrays to study the behavior of multiple drop and particle systems such as spray and aerosol systems relevant to the energy, environmental, and material sciences.