Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPECTRAL REFLECTANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Origin of additional spectral features in modulated reflectance spectra of 2-dimensional semiconductor systems

High resolution photoreflectance (PR) spectroscopy study on a single GaAs/AlGaAs quantum well representing a two-dimensional (2D) system, shows additional distinct spectral features on the high energy side of the first confined heavy-hole and light-hole exciton transitions. The PR experiments involved a special dual detection technique which significantly improved the measurement sensitivity. Photoluminescence excitation spectroscopy data on the sample showed broadened step-like features around these energies. A detailed lineshape analysis, including first principles simulations, was performed to understand the origins of these additional PR spectral features. They are shown to arise primarily from inhomogeneously broadened first excited state transition of the excitons, rather than from a change in the joint density of states at the exciton continuum edge. The analysis suggests that such features are more likely in the case of 2D excitons as compared to 3D excitons in bulk material. Apart from its significance for post-growth characterization, identification of these additional PR features enables direct estimation of the exciton binding energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Satellite Observations of Desert Dust-induced Himalayan Snow Darkening

The optically thick aerosol layer along the southern edge of the Himalaya has been subject of several recent investigations relating to its radiative impacts on the South Asian summer monsoon and regional climate forcing. Prior to the onset of summer monsoon, mineral dust from southwest Asian deserts is transported over the Himalayan foothills on an annual basis. Episodic dust plumes are also advected over the Himalaya, visible as dust-laden snow surface in satellite imagery, particularly in western Himalaya. We examined spectral surface reflectance retrieved from spaceborne MODIS observations that show characteristic reduction in the visible wavelengths (0.47 nm) over western Himalaya, associated with dust-induced solar absorption. Case studies as well as seasonal variations of reflectance indicate a significant gradient across the visible (0.47 nm) to near-infrared (0.86 nm) spectrum (VIS-NIR), during premonsoon period. Enhanced absorption at shorter visible wavelengths and the resulting VIS-NIR gradient is consistent with model calculations of snow reflectance with dust impurity. While the role of black carbon in snow cannot be ruled out, our satellite-based analysis suggests the observed spectral reflectance gradient dominated by dust-induced solar absorption during premonsoon season. From an observational viewpoint, this study underscores the importance of mineral dust deposition toward darkening of the western Himalayan snow cover, with potential implications to accelerated seasonal snowmelt and regional snow albedo feedbacks.

Remote Sensing↗

MODIS On-orbit Spectral Calibration for the Reflective Solar Bands

The Moderate Resolution Imaging Spectroradiometer (MODIS) makes observations in 36 spectral bands with wavelengths from 0.41 to 14.5 microns. The bands with center wavelengths below 2.2 microns are referred as the reflective solar bands (RSB) with their radiometric calibration performed by a solar diffuser (SD) and a solar diffuser stability monitor (SDSM). This paper focuses on the MODIS spectral calibration performed by its unique on-board calibrator (OBC): the Spectro-Radiometric Calibration Assembly (SRCA). When operated in the spectral mode, the SRCA acts as a monochromator with internal spherical integration source (SIS) that measures the spectral responses for all the reflective solar bands. A wavelength calibrator, a didymium filter with known spectral profile, is utilized to calibrate the wavelength scale for the grating positions during each SRCA spectral calibration activity. The capability of self-wavelength calibration allows the SRCA to track the center wavelength shifts and to monitor the spectral response changes throughout the instruments lifetime. The MODIS spectral calibration, same for both Terra and Aqua missions, is performed every three months on-orbit. An overview of MODIS spectral characterization approach and a summary of the on-orbit results will be presented in this paper.

Xiong, X.↗

Quick and Easy Measurements of the Inherent Optical Property of Water by Laser

To generate realistic images of natural waters, one must consider in some detail the interaction of light with the water body. The reflectance and attenuation coefficient of the second harmonic of Nd:YAG laser light through distilled water and a sample of water from the Oman Sea were measured in a solid-state laser laboratory to estimate inherent optical properties of natural waters. These measurements determined the bottom conditions and the impurities of the water. The water's reflectivity varied depending on the angle of incidence, height of the laser from water surface, wavelength of laser light, radiant intensities, and depth of water. In these experiments laser light propagated through the water nonlinearly, and different reflectance showed different bottom slopes. The differences among various water samples were obtained taking into account the exponential equation in attenuation coefficient versus depth graphs.

36 MATERIALS SCIENCE↗

Optical and electronic properties of Ti{sub 1-x}Nb{sub x}N thin films

Ti{sub 1-x}Nb{sub x}N thin films with x=0, 0.26, 0.41, 0.58 and 1 were deposited on silicon (311) substrate by RF magnetron sputtering. The dielectric functions of these films were calculated by fitting measured reflectance spectra to the Drude-Lorentz model. The measured reflectance spectra exhibits a minimum in the visible region and this feature shifts to higher energy (shorter wavelength) with increase in x. The observed behavior can be modeled as the response of four Lorentz oscillators. The real part of the dielectric function is characterized by a screened plasma energy of 2.26 eV for x=0 which increased to 2.80 eV for x=0.58 in the Ti{sub 1-x}Nb{sub x}N film.

36 MATERIALS SCIENCE↗

Thermal diffusion in Ni/Al multilayer

Two Ni/Al multilayers deposited by ion beam sputtering of nominal design [Ni(200A)/Al(100A)] Multiplication-Sign 5 and [Ni(50A)/Al(227A)] Multiplication-Sign 5 on Si substrates were annealed at 200 Degree-Sign C. As-deposited and annealed samples were characterized by x-ray diffraction (XRD) and x-ray reflectometry (XRR). The effort was to study the path of alloying in the above two multilayers of same elements but of opposite stoichiometric ratio. We find distinct differences in alloying of these samples.

36 MATERIALS SCIENCE↗

Diffraction-induced subradiant transverse-magnetic lattice plasmon modes in metal nanoparticle arrays

This Letter reports theoretical and experimental study of transverse-magnetic-like lattice plasmon modes originating from diffraction in periodic two dimensional arrays of metal nanoparticles. These modes lead to the transmission and reflection spectra exhibiting narrow linewidth Fano-like resonances which can appear as maxima, minima, or can have asymmetric peak-and-dip profile. The dependencies of the position and lineshape of the resonance on the lattice periodicity and angle of incidence are investigated. Numerical simulations of electric field distributions for different excitation conditions of lattice plasmon modes are also performed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study on higher harmonic suppression using edge filter and polished Si wafer

Higher harmonics contamination is a severe problem in synchrotron beamlines where grating monochromators are used. In these beamlines, absorption edge filters and critical angle mirrors are used to suppress the harmonic contaminations. In the present study, carried out using Indus-1 reflectivity beamline, a harmonic suppression characteristic of Al edge filter and polished silicon wafer are determined. It is found that the Al filter suppresses higher harmonics in 2–7% range whereas the polished silicon wafer can suppress the higher harmonics below 1%. The results of comparative study are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multicolor generation using silicon nanodisk absorber

A multicolored matrix that spans the visible range was demonstrated by using silicon nanodisk arrays. A nanostructured silicon substrate, which featured periodic silicon nanodisk arrays of various diameters, inter-nanodisk distances, and heights, was fabricated using electron-beam lithography and reactive ion etching. These silicon nanodisks were able to support HE{sub 1m} leaky modes, which depended on the diameter of the nanodisks, resulting in wavelength-dependent reflection spectra. The resonant wavelength redshifted linearly with the increasing nanodisk diameter. The output color lay in the visible range and was observed to be tunable when varying the diameter, interdistance, and height. The results of finite-difference time-domain simulations exhibited close agreement with the observed optical properties of the periodic silicon nanodisk arrays.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interface study and performance of large layer pair ultra-short period W/B{sub 4}C X-ray multilayer

The nature of interfaces in ultra short period W/B{sub 4}C multilayers (MLs) is studied using hard x-ray reflectivity and cross sectional transmission electron microscope. W/B{sub 4}C MLs are fabricated using magnetron sputtering system with systematic varying thickness of both W and B{sub 4}C layers from ∼5 to 30 Å keeping number of layer pairs fixed at 10. It is observed that in low period W/B{sub 4}C ML, as the layer thickness decreases, the interdiffusion plays a significant role because of the discontinuous nature of film. This gives variation of density and roughness of the layer as well as generates thickness errors in the ML structure due to volume changes which is originated by interdifusion process. Finally, W/B{sub 4}C MLs with large number of layer pairs (300) are fabricated with periodicity d= 20 Å which gives ∼54 % of reflectivity at energy 8.047 keV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of First-Order Gratings in Silicon Photonic Waveguides

A simple thin film effective index analysis for first order gratings in Si photonic waveguides is shown to provide highly accurate results for reflected and transmitted power spectrums as long as the waveguide remains single mode and non-radiating. A cover layer can be added to the grating region of a Si photonic waveguide to increase the strength of the grating, modify transition losses from the input waveguide to the grating waveguide region, and/or modify the width of the reflectivity spectrum. For a given grating period, the peak reflection and spectral width of the reflectivity decrease as the duty cycle is decreased or increased from ~50%. For both radiating and multimode structures, the coupling between all modes, power radiated towards the superstrate (upwards), power radiated downwards (substrate) and transmitted power analyzed by Floquet-Bloch, Eigenmode Expansion and Finite Difference Time Domain methods show excellent agreement. Coupling coefficients calculated using analytic formulas are shown to be accurate only for shallow grating depths.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reflectance anisotropy spectroscopy: A probe to explore organic epitaxial growth

Reflectance anisotropy spectroscopy (RAS) is demonstrated to be particularly suitable for studying the deposition of organic epitaxial layers in ultrahigh vacuum by organic molecular beam epitaxy, thanks to its high sensitivity and applicability in situ. In the case of {alpha}-quaterthiophene, both homoepitaxy and heteroepitaxy have been monitored, demonstrating the crystallinity of the films up to tens of monolayers and the epitaxial relation to the substrate. In both cases, optical RAS data are compared to the results of ex situ characterization of the same samples by atomic force microscopy.

36 MATERIALS SCIENCE↗

Study of silicon strip waveguides with diffraction gratings and photonic crystals tuned to a wavelength of 1.5 µm

Single-mode submicrometer-thick strip waveguides on silicon-on-insulator substrates, fabricated by silicon-planar-technology methods are considered. To solve the problem of 1.5-µm wavelength radiation input-output and its frequency filtering, strip diffraction gratings and two-dimensional photonic crystals are integrated into waveguides. The reflection and transmission spectra of gratings and photonic crystals are calculated. The waveguide-mode-attenuation coefficient for a polycrystalline silicon waveguide is experimentally estimated.

36 MATERIALS SCIENCE↗

Observations of the Circinus X-1 region

The X-ray telescope on board the OSO-7 satellite has provided observations of the Cir X-1 region for over 110 days between December 1971 and March 1973. Although statistically significant fluctuations in the 7- to 11-keV flux were measured, no periodicities in the range between 5 hours and 100 days were found to an upper limit of about 40 percent amplitude. Intensities in the 7- to 57-keV range show variability by a factor of approximately 25 and changes in the spectral shape reflected by a number spectral index varying from about 1.1 to about 3.0. There is a positive correlation between intensity and spectral shape, with a steeper spectrum at times of peak intensity. Although power-law, exponential, and blackbody spectral shapes are equally good fits to these data alone, examination of all the available data appears to rule out a simple blackbody spectrum, at least at times of maximum intensity.

Baity, W. A.↗

Using EO-1 Hyperion to Simulate HyspIRI Products for a Coniferous Forest: The Fraction of PAR Absorbed by Chlorophyll (fAPAR(sub chl)) and Leaf Water Content (LWC)

This study presents development of prototype products for terrestrial ecosystems in preparation for the future imaging spectrometer planned for the Hyperspectral Infrared Imager (HyspIRI) mission. We present a successful demonstration example in a coniferous forest of two product prototypes: fraction of photosynthetic active radiation (PAR) absorbed by chlorophyll of a canopy (fAPAR(sub chl)) and leaf water content (LWC), for future HyspIRI implementation at 60 m spatial resolution. For this, we used existing 30 m resolution imaging spectrometer data available from the Earth Observing One (EO-1) Hyperion satellite to simulate and prototype the level one radiometrically corrected radiance (L1R) images expected from the HyspIRI visible through shortwave infrared spectrometer. The HyspIRI-like images were atmospherically corrected to obtain surface reflectance, and spectrally resampled to produce 60 m reflectance images for wavelength regions that were comparable to all seven of the MODerate resolution Imaging Spectroradiometer (MODIS) land bands. Thus, we developed MODIS-like surface reflectance in seven spectral bands at the HyspIRI-like spatial scale, which was utilized to derive fAPARchl and LWC with a coupled canopy-leaf radiative transfer model (PROSAIL2) for the coniferous forest[1]. With this study, we provide additional evidence that the fAPARchl product is more realistic for describing the physiologically active canopy than the traditional fAPAR parameter for the whole canopy (fAPAR(sub canopy)), and thus should replace it in ecosystem process models to reduce uncertainties in terrestrial carbon cycle studies and ecosystem studies.

Zhang, Qingyuan↗

Using EO-1 Hyperion to Simulate HyspIRI Products for a Coniferous Forest: The Fraction of PAR Absorbed by Chlorophyll (fAPAR(sub chl)) and Leaf Water Content(LWC)

This paper presents development of prototype products for terrestrial ecosystems in preparation for the future imaging spectrometer planned for the Hyperspectral Infrared Imager (HyspIRI) mission. We present a successful demonstration example in a coniferous forest of two product prototypes: fraction of photosynthetically active radiation (PAR) absorbed by chlorophyll of a canopy (fAPARchl) and leaf water content (LWC), for future HyspIRI implementation at 60-m spatial resolution. For this, we used existing 30-m resolution imaging spectrometer data available from the Earth Observing One (EO-1) Hyperion satellite to simulate and prototype the level one radiometrically corrected radiance (L1R) images expected from the HyspIRI visible through shortwave infrared spectrometer. The HyspIRIlike images were atmospherically corrected to obtain surface reflectance and spectrally resampled to produce 60-m reflectance images for wavelength regions that were comparable to all seven of the MODerate resolution Imaging Spectroradiometer (MODIS) land bands. Thus, we developed MODIS-like surface reflectance in seven spectral bands at the HyspIRI-like spatial scale, which was utilized to derive fAPARchl and LWC with a coupled canopy-leaf radiative transfer model (PROSAIL2) for the coniferous forest. With this paper, we provide additional evidence that the fAPARchl product is more realistic in describing the physiologically active canopy than the traditional fAPAR parameter for the whole canopy (fAPARcanopy), and thus, it should replace it in ecosystem process models to reduce uncertainties in terrestrial carbon cycle and ecosystem studies.

Earth Observing One↗

Inference of Surface Chemical and Physical Properties Using Mid-Infrared (MIR) Spectral Observations

Reflected or emitted energy from solid surfaces in the solar system can provide insight into thermo-physical and chemical properties of the surface materials. Measurements have been obtained from instruments located on Earth-based telescopes and carried on several space missions. The characteristic spectral features commonly observed in Mid-Infrared (MIR) spectra of minerals will be reviewed, along with methods used for compositional interpretations of MIR emission spectra. The influence of surface grain size, and space weathering processes on MIR emissivity spectra will also be discussed. Methods used for estimating surface temperature, emissivity, and thermal inertias from MIR spectral observations will be reviewed.

Earth-based telescopes↗