Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Mechanical Abuse Simulation and Thermal Runaway Risks of Large-Format Li-ion Batteries

Internal short circuit of large-format Li-ion cells induced by mechanical abuse was simulated using a modified mechanical pinch test. A torsion force was added manually at ~40% maximum compressive loading force during the pinch test. The cell was twisted about 5 degrees to the side by horizontally pulling a wire attached to the anode tab. The combined torsion-compression force created small enough failure at the separator and allowed testing of fully charged large format Li-ion cells without triggering thermal runaway. Two types of commercial cells were tested using 4-6 cells at each state-of-charge (SOC). The 18 Ah LiFePO 4 (LFP) and 25 Ah Li(NiMnCo) 1/3 O 2 (NMC) cells were tested and the thermal runaway risk (TRR) score system was used to evaluate the safety risk of the cells under the same testing conditions. The aim is to provide the cell manufacturers and end users a tool to compare different designs and safety features.

25 ENERGY STORAGE↗
DOE OSTI2017

A phenomenological force model of Li-ion battery packs for enhanced performance and health management

A 1-D phenomenological force model of a Li-ion battery pack is proposed to enhance the control performance of Li-ion battery cells in pack conditions for efficient performance and health management. The force model accounts for multiple swelling sources under the operational environment of electric vehicles to predict swelling-induced forces in pack conditions, i.e. mechanically constrained. The proposed force model not only incorporates structural nonlinearities due to Li-ion intercalation swelling, but also separates the overall range of states of charge into three ranges to account for phase transitions. Additionally an approach to study cell-to-cell variations in pack conditions is proposed with serial and parallel combinations of linear and nonlinear stiffness, which account for battery cells and other components in the battery pack. The model is shown not only to accurately estimate the reaction force caused by swelling as a function of the state of charge, battery temperature and environmental temperature, but also to account for cell-to-cell variations due to temperature variations, SOC differences, and local degradation in a wide range of operational conditions of electric vehicles. Considering that the force model of Li-ion battery packs can account for many possible situations in actual operation, the proposed approach and model offer potential utility for the enhancement of current battery management systems and power management strategies.

25 ENERGY STORAGE↗
DOE OSTI2022

Compressible battery foams to prevent cascading thermal runaway in Li-ion pouch batteries

Lithium-ion battery packs require thermal management to achieve optimum life and safety. This is becoming crucial for battery packs composed of high-energy-density cells. Pouch cells themselves achieve highest packaging efficiency but require additional structural support and thermal management when grouped into modules, especially under abusive conditions such as thermal runaway. Novel foam battery pads have demonstrated to cushion volume changes of pouch cells and are reengineered in this study to mitigate cell-to-cell thermal runaway propagation. The compressible pads are made of polyurethane foams incorporating flame-retardant additives or coatings, including intumescent and fire wall materials. Here their performances were evaluated by conducting nail penetration tests on modules composed of pouch cells at 100% state of charge (SOC), with the foams placed in between the cells. Experimental results show cascading thermal runaway was considerably delayed by polyurethane foams incorporating flame-retardant additives or coatings. Complete prevention of cascading failure was achieved with dense polyurethane foams with multilayered coatings of both fire wall and intumescent materials.

25 ENERGY STORAGE↗
DOE OSTI2022

Enhanced physics-constrained deep neural networks for modeling vanadium redox flow battery

Numerical simulation has become indispensable in advancing cost-effective process optimization and control of flow batteries. We propose an enhanced version of the physics-constrained deep neural network (PCDNN) approach to provide high-accuracy voltage predictions in the vanadium redox flow batteries (VRFBs). The purpose of the PCDNN approach is to enforce the physics-based zero-dimensional (0D) VRFB model in a neural network to assure model generalization for various battery operation conditions. However, limited by the simplifications of the 0D model, the PCDNN cannot capture sharp voltage changes in the extreme SOC regions. To improve the accuracy of voltage prediction at extreme ranges, we introduce a second (enhanced) DNN to mitigate the prediction errors carried from the 0D model itself and call the resulting approach enhanced PCDNN (ePCDNN). By comparing with experimental data, we demonstrate that the ePCDNN approach can accurately capture the voltage response throughout the charge–discharge cycle, including the tail region of the voltage discharge curve. The loss function for training the ePCDNN is designed to be flexible by adjusting the weights of the physics-constrained DNN and the enhanced DNN. In conclusion, this allows the ePCDNN framework to be transferable to battery systems with variable physical model fidelity.

25 ENERGY STORAGE↗
DOE OSTI2025

Infiltrated electrodes for metal supported solid oxide electrolysis cells

Metal-supported solid oxide cells (MSOCs) are an alternative to conventional solid oxide cells (SOCs) based on ceramic cermets, offering lower material costs and higher operational flexibility. In this study symmetric MSOCs with infiltrated electrodes are explored for steam electrolysis operation to understand the underlying operation and degradation principles and suggest a direction for future MSOCs development. Two different fuel electrode backbones are used: an electronically-conductive lanthanum strontium co-doped iron nickel titanate (LSFNT) infiltrated with cerium-gadolinium oxide (CGO), or an ionic conductive zirconia based backbone (10ScYSZ) infiltrated with Ni:CGO. At the oxygen side, the backbone is 10ScYSZ, which is infiltrated with lanthanum-strontium co-doped cobalt oxide (LSC), or praseodymium oxide as cobalt-free alternative for comparison. This study suggests that the backbone electronic conductivity is key for good electrochemical performance as well as for boosting cell durability. Highly electronically conductive nanoparticles, especially nickel, were observed to irreversibly agglomerate driven by thermal conditions, whereas CGO proved to be a very stable electrocatalyst. At the fuel side, CGO (LSFNT) electrode showed lower ASR and degradation rate than Ni:CGO(ScYSZ) configuration with measured values of 0.50 Ω cm2 and 11 %/1000 h (at 0.60 A/cm2), and 0.70 Ω cm2 and 26 %/1000 h (at 0.50 A/cm2) at 1.30 V, respectively (700 °C, 50 % steam in hydrogen at the fuel side and air at the oxygen electrode side, LSC(ScYSZ) oxygen electrode).

25 ENERGY STORAGE↗
DOE OSTI2016

On the possibility of electrochemical unzipping of multiwalled carbon nanotubes to produce graphene nanoribbons

Highlights: • MWCNTs synthesized and electrochemically oxidized to study the formation of GNR • HRTEM, Raman and XPS confirmed no successful unzipping occurred after oxidation • Electrochemical oxidation very unlikely facilitate formation of intercalated MWCNTs - Abstract: Multiwalled carbon nanotubes (MWCNTs) with different geometrical characteristics and chemical doping have been synthesized and electrochemically oxidized to study the possibility of unzipping, and creating graphene nanoribbon (GNR) nanostructures. Modified glassy carbon electrodes of the MWCNTs have been tested in an aqueous electrolyte via anodic scans in a wide range of potentials, followed by keeping at the maximum potential for different times. The microstructural features, structural defects, and functional groups and their elements have been then studied using high resolution transmission electron microscopy (HRTEM), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS), respectively. All results have confirmed that no successful unzipping occurs in the MWCNTs after electrochemical oxidation, even for the nitrogen-doped MWCNTs (CN{sub x}-MWCNTs) with reactive nitrogen groups and defective bamboo structures. In contrast to the report by Shinde et al. (J. Am. Chem. Soc. 2011, 133, 4168–4171), it has been concluded that the electrochemical oxidation in aqueous electrolytes is very unlikely to facilitate sufficient incorporation of the intercalated molecules among the walls of the MWCNTs. These molecules are, however, responsible for unzipping of MWCNTs.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Advancing Inverse Sensitivity/Uncertainty Methods for Nuclear Fuel Cycle Applications

The inverse sensitivity/uncertainty quantification (IS/UQ) method has recently been implemented in the Inverse Sensitivity/UnceRtainty Estimator (INSURE) module of the AMPX cross section processing system [M.E. Dunn and N.M. Greene, “AMPX-2000: A Cross-Section Processing System for Generating Nuclear Data for Criticality Safety Applications,” Trans. Am. Nucl. Soc. 86, 118–119 (2002)]. The IS/UQ method aims to quantify and prioritize the cross section measurements along with uncertainties needed to yield a given nuclear application(s) target response uncertainty, and doing this at a minimum cost. Since in some cases the extant uncertainties of the differential cross section data are already near the limits of the present-day state-of-the-art measurements, requiring significantly smaller uncertainties may be unrealistic. Therefore, we have incorporated integral benchmark experiments (IBEs) data into the IS/UQ method using the generalized linear least-squares method, and have implemented it in the INSURE module. We show how the IS/UQ method could be applied to systematic and statistical uncertainties in a self-consistent way and how it could be used to optimize uncertainties of IBEs and differential cross section data simultaneously. We itemize contributions to the cost of differential data measurements needed to define a realistic cost function.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

A class of solutions of the two-dimensional Toda lattice equation

In this study, a method is proposed to systematically generate solutions of the two-dimensional Toda lattice equation in terms of previously known solutions ϕ(x,y) of the two-dimensional Laplace's equation. The solitonic solution of Nakamura's [J. Phys. Soc. Jpn. 52 (1983) 380] is shown to correspond to one particular choice of ϕ(x,y).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Controls and variability of soil respiration temperature sensitivity across China

Understanding the temperature sensitivity (Q 10 ) of soil respiration is critical for benchmarking the potential intensity of regional and global terrestrial soil carbon fluxes-climate feedbacks. Although field observations have demonstrated the strong spatial heterogeneity of Q 10 , a significant knowledge gap still exists regarding to the factors driving spatial and temporal variabilities of Q 10 at regional scales. Here, therefore, we used a machine learning approach to predict Q 10 from 1994 to 2016 with a spatial resolution of 1 km across China from 515 field observations at 5 cm soil depth using climate, soil and vegetation variables. Predicted Q 10 varied from 1.54 to 4.17, with an area-weighted average of 2.52. There was no significant temporal trend for Q 10 (p = 0.32), but annual vegetation production (indicated by normalized difference vegetation index, NDVI) was positively correlated to it (p < 0.01). Spatially, soil organic carbon (SOC) was the most important driving factor in 62 % of the land area across China, and varied greatly, demonstrating soil controls on the spatial pattern of Q 10 . These findings highlighted different environmental controls on the spatial and temporal pattern of soil respiration Q 10 , which should be considered to improve global biogeochemical models used to predict the spatial and temporal patterns of soil carbon fluxes to ongoing climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Responses of particulate and mineral-associated organic carbon to temperature changes and their mineral protection mechanisms: A soil translocation experiment

Mineral protection mechanisms are important in determining the response of particulate organic carbon (POC) and mineral-associated organic carbon (MAOC) to temperature changes. However, the underlying mechanisms for how POC and MAOC respond to temperature changes are remain unclear. Here, by translocating soils across 1304 m, 1425 m and 2202 m elevation gradient in a temperate forest, simulate nine months of warming (with soil temperature change of +1.41 °C and +3.91 °C) and cooling (with soil temperature change of −1.86 °C and −4.20 °C), we found that warming translocation significantly decreased POC by an average of 10.84 %, but increased MAOC by an average of 4.25 %. Conversely, cooling translocation led to an average increase of 8.64 % in POC and 13.48 % in MAOC. Exchangeable calcium (Ca exe ) had a significant positive correlation with POC and MAOC during temperature changes, and Fe/Al-(hydr)oxides had no significant correlation or a significant negative correlation with POC and MAOC. Our results showed that POC was more sensitive than MAOC to temperature changes. Ca exe mediated the stability of POC and MAOC under temperature changes, and Fe/Al-(hydr)oxides had no obvious protective effect on POC and MAOC. Our results support the role of mineral protection in the stabilization mechanism of POC and MAOC in response to climate change and are critical for understanding the consequences of global change on soil organic carbon (SOC) dynamics.

Mineral protection↗
DOE OSTI2021

Belowground allocation and dynamics of recently fixed plant carbon in a California annual grassland

Plant roots and the organisms that surround them are a primary source for stabilized soil organic carbon (SOC). While grassland soils have a large capacity to store organic carbon (C), few field-based studies have quantified the amount of plant-fixed C that moves into soil and persists belowground over multiple years. Yet this characteristic of the soil C cycle is critical to C storage, soil water holding capacity, nutrient provisions, and the management of soil health. Here, we tracked the fate of plant-fixed C following a five-day 13 CO 2 labeling of a Northern California annual grassland, measuring C pools starting at the end of the labeling period, at three days, four weeks, six months, one year, and two years. Soil organic carbon was fractionated using a density-based approach to separate the free-light fraction (FLF), occluded-light fraction (OLF), and heavy fraction (HF). Using isotope ratio mass spectrometry, we measured 13 C enrichment and total C content for plant shoots, roots, soil, soil dissolved organic carbon (DOC), and the FLF, OLF, and HF. The chemical nature of C in the HF was further analyzed by solid state 13 C nuclear magnetic resonance (NMR) spectroscopy.

13C-NMR↗
DOE OSTI2024

Getting to the root of the problem: Soil carbon and microbial responses to root inputs within a buried paleosol along an eroding hillslope in southwestern Nebraska, USA

Large quantities of soil carbon (C) can persist within paleosols for millennia due to burial and subsequent isolation from plant-derived inputs, atmospheric conditions, and microbial activity at the modern surface. Erosion exposes buried soils to modern root-derived C influx via root exudation and root turnover, thus stimulating microbial activity leading to SOC decomposition and accumulation through organo-mineral stabilization of modern C. With this study we aim to quantify how modern root-derived C inputs impact paleosol C decomposition and stabilization across varying degrees of isolation from modern surface conditions in southwestern Nebraska, USA, where hillslope erosion is bringing a buried Late-Pleistocene-early Holocene paleosol (the “Brady Soil”) closer to the modern surface. We collected Brady Soil samples from 0.2m, 0.4m, and 1.2m below the modern surface and conducted two lab-based incubations. Soils were amended with either (1) a lab-synthesized mixture of low molecular weight compounds (12 atom% 13 C), or (2) 13 C enriched root residues (92 atom% 13 C), in 30-day and 240-day incubation experiments, respectively. Here we determined microbial responses to synthetic root exudates and residues by partitioning the 13 C label from Brady Soil C, including measurements of total, root, and primed C respiration, microbial biomass C (MBC), microbial C use efficiency (CUE). To assess the capacity of isolated paleosols to accrue modern plant C, we used Nano-scale Secondary Ion Mass Spectrometry imaging. We found that: (1) adding root-derived C inputs primed Brady Soil C across all depths, and was mediated by depth and composition of root additions; (2) root-derived C inputs stimulated microbial biomass C (MBC) growth similarly across depths, but the magnitude of CUE and MBC varied by chemistry of root-derived additions; (3) new particulate organic matter was incorporated into mineral-associated pools over time; (4) material from the added root residues was found in association with bacterial cells and fungal hyphae as well as with soil aggregate and mineral surfaces. Our study shows that paleosols defy expectations of C content and reactivity with depth, and changes in land cover and climate will expose buried paleosols to modern surface conditions, increasing respired C. This work highlights the importance of evaluating the role resurfacing buried soils through landscape change plays in C cycle feedbacks to the climate system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Lipids represent a dynamic, yet stable pool of microbially-derived soil carbon

There is an emerging consensus that microorganisms are a primary source of persistent, slow-cycling soil organic matter (SOM), however which microbial residues contribute to SOM and what controls their accumulation remains unresolved. Lipids are a commonly overlooked biomolecular pool that could contribute significantly to stable SOM. While current estimates for phospholipid degradation in soils are rapid, lipids are structurally heterogeneous molecules that could turnover at different rates. Through a year-long soil incubation and compound-specific, stable isotope probing (SIP)-lipidomics, we were able to rigorously track the persistence of lipid compounds in silty and sandy switchgrass bioenergy crop soils. Here, we assessed the influence of lipid structure on soil lipid accrual and degradation as moderated by soil texture, since mineral association is presumed to be the primary mechanism for lipid persistence. After rapid incorporation of 13 C glucose into microbial biomass, we found 13 C label was retained broadly across chemically diverse lipid classes, even after one year. 13 C-labeled lipid profiles varied significantly with soil texture; however, we found no difference between sandy and silty soils in lipid retention, suggesting soil texture may only play a minor role in modulating lipid persistence. Only two lipid subclasses were found to be persistent (i.e., retention of 13 C label without significant degradation or production): phosphatidylinositol lipids and hydroxyceramide lipids, both of which are negatively charged, possibly facilitating stabilization by mineral complexation. However, several other subclasses displayed substantial ongoing production. In particular, the accumulation of triacylglycerol lipids across soil textures suggests that storage lipids may be an important component of SOC, highlighting a potential target for management strategies to promote C retention by lipid accrual. Overall, the retention for over a year of 13 C label in microbial intact lipid biomarkers reveals the importance of efficient biomass production and turnover when considering microbial C contributions to SOM.

compound-specific↗
DOE OSTI2016

The effect of cobalt doping on the morphology and electrochemical performance of high-voltage spinel LiNi 0.5 Mn 1.5 O 4 cathode material

In this paper, to reveal the effects of Co-doping on the electrochemical performance of micro-sized LiNi 0.5 Mn 1.5 O 4 (LNMO), undoped LNMO and Co-doped LiCo 0.1 Ni 0.45 Mn 1.45 O 4 (LCoNMO) are synthesized via a PVP-combustion method and calcined at 1000 °C for 6 h. SEM and XRD analyses suggest that Co-doping decreases the particle size and the Li z Ni 1-z O 2 impurity at the calcination temperature of 1000 °C. LCoNMO has much better rate capability while its specific capacity at C/5 is 10% lower than that of LNMO. At 15 C rate, their specific capacities are closed, and the LCoNMO delivers 86.2% capacity relative to C/5, and this value for LNMO is only 77.0%. The D Li + values determined by potential intermittent titration technique (PITT) test of LCoNMO are 1–2 times higher than that of LNMO in most SOC region. The LCoNMO shows very excellent cycling performance, which is the best value compared with literatures. After 1000 cycles, the LCoNMO still delivers 94.1% capacity. Finally, moreover, its coulombic efficiency and energy efficiency keep at 99.84% and over 97.3% during 1 C cycling, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Blockade of store-operated calcium entry alleviates ethanol-induced hepatotoxicity via inhibiting apoptosis

Extracellular Ca{sup 2+} influx has been suggested to play a role in ethanol-induced hepatocyte apoptosis and necrosis. Previous studies indicated that store-operated Ca{sup 2+} entry (SOCE) was involved in liver injury induced by ethanol in HepG2 cells. However, the mechanisms underlying liver injury caused by SOCE remain unclear. We aimed to investigate the effects and mechanism of SOCE inhibition on liver injury induced by ethanol in BRL cells and Sprague–Dawley rats. Our data demonstrated that ethanol (0–400 mM) dose-dependently increased hepatocyte injury and 100 mM ethanol significantly upregulated the mRNA and protein expression of SOC for at least 72 h in BRL cells. Blockade of SOCE by pharmacological inhibitors and sh-RNA knockdown of STIM1 and Orai1 attenuated intracellular Ca{sup 2+} overload, restored the mitochondrial membrane potential (MMP), decreased cytochrome C release and inhibited ethanol-induced apoptosis. STIM1 and Orai1 expression was greater in ethanol-treated than control rats, and the SOCE inhibitor corosolic acid ameliorated the histopathological findings and alanine transaminase and aspartate transaminase activity as well as decreased cytochrome C release and inhibited alcohol-induced cell apoptosis. These findings suggest that SOCE blockade could alleviate alcohol-induced hepatotoxicity via inhibiting apoptosis. SOCE might be a useful therapeutic target in alcoholic liver diseases. - Highlights: • Blockade of SOCE alleviated overload of Ca{sup 2+} and hepatotoxicity after ethanol application. • Blockade of SOCE inhibited mitochondrial apoptosis after ethanol application. • SOCE might be a useful therapeutic target in alcoholic liver diseases.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Optimal charging management and infrastructure planning for free-floating shared electric vehicles

Recently, major car-sharing service providers have begun to include electric vehicles (EVs) in free-floating car-sharing fleets. For these EVs, downtime due to charging, including time spent traveling to and waiting in queues at charging stations in a sparse charging infrastructure network, is a major barrier to sustainable operation. An intuitive solution to overcome this barrier is to increase the number of fast-charging stations in the fleet service area. This paper studies the relationship between fleet vehicle downtime and the number of charging stations by modeling the fleet operations of a major car-sharing service provider. An integer programming model is developed that jointly optimizes charging station allocation, in terms of the number and location of charging stations, and the assignment of EVs to charging stations. Case study results showed that fleet vehicle charging time comprises 72-75% of the total downtime spent on charging trips. This indicates that charging time, as opposed to travel time or waiting time, is the dominant component of total fleet downtime for charging. The study also shows that by adding 5 to 20 new charging stations reduces total fleet downtime and travel time during charging trips by 2-4% and 26-49%, respectively. Although adding new charging stations to the fleet service area reduces total charging trip travel time significantly, it does not reduce total downtime significantly. Results also show that if the EV battery state of the charge (SOC) threshold—below which a charging trip is initiated—is less than 18%, not all EVs in the car-sharing fleet can be charged using the existing direct current fast chargers (DCFCs) in the fleet’s service area. Furthermore, this implies that adequate charging infrastructure coverage is required to ensure that EVs of a given range can operate in the car-sharing fleet.

25 ENERGY STORAGE↗
DOE OSTI2022

Interplay of electronic structure, magnetism, strain, and defects in carbide $\mathrm{MX}$enes

We report the two-dimensional (2D) magnetic and semiconducting materials, including carbide MXenes, are in high demand for magneto-electronic devices and applications. Here, we report a first-principles study of electronic structure and magnetism of a Ti 2 C MXene, its derivatives Ti 2 CT 2 (T = -F, -O, -OH, -H), and the effect of single vacancy defects (25% C, 12.5% O, and 12.5% and 5.5% Ti) and transition metal (V, Cr, Mn, and Co) dopings. The MAX phase Ti 2 AlC is a non-magnetic (NM) metal which upon removal of Al layer forms a pristine Ti 2 C MXene with A-type antiferromagnetic (AFM) semiconductor having reliable transition temperature (T N = 41K) predicted by the Heisenberg model. All the functionalized MXenes are stable as NM metal except for Ti 2 CO 2 which remains semiconducting with NM ground state. The significant effect of spin–orbit coupling (SOC) is evident in the band structure forming Dirac-like cones and band inversions near the Fermi level. Depending upon the type of vacancy defects Ti 2 CO 2 is NM metal and ferromagnetic (FM) metal. The transition metal (TM) doped MXenes fulfill FM Stoner criterion. The V- and Co-doped MXenes are metals, whereas Cr- and Mn-doped are half-metal and semiconductor.

2D magnetism↗
DOE OSTI2022

Predicting battery capacity from impedance at varying temperature and state of charge using machine learning

Prediction of battery health from electrochemical impedance spectroscopy (EIS) data can enable rapid measurement of battery state in real-world applications without using additional sensors or time-consuming performance measurements. However, deconvoluting the effect of capacity, state of charge, and temperature on EIS response is complicated analytically. Here, various machine-learning models, such as linear, Gaussian process, random forest, and artificial neural network regression, are utilized to predict capacity from EIS using hundreds of capacity, direct current (DC) resistance, and EIS measurements recorded under varying conditions of health, temperature, and state of charge (SOC). Several feature extraction and selection methods from traditional electrochemical analysis and statistical modeling are explored using machine-learning pipelines. EIS data from just two frequencies can accurately predict capacity, and interrogation shows that the optimal set of frequencies is not usually intuitive. Best results are achieved with an ensemble model, which predicts battery capacity with a mean absolute error of 1.9% on data from unobserved cells.

25 ENERGY STORAGE↗