Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reproducibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Grain structure and texture selection regimes in metal powder bed fusion

Additive manufacturing (AM) offers opportunities to produce complex part geometries not possible with conventional processing and in some cases even improve part performance. However, adoption has been slowed by difficulties assessing microstructure variability and there is no straightforward approach to relate processing to grain structure characteristics. In this study, datasets from AdditiveFOAM heat transport simulations of laser powder bed fusion (LPBF) are used to drive ExaCA simulations of grain structure. The GPU utilization of ExaCA and an algorithmic update for modeling melt pool overlap region solidification enabled rapid and parallel simulation across a wider range of process conditions than previously explored with cellular automata-based solidification models. A texture selection angle $θ_s$ is defined based on melt pool overlap geometry, and the range of $θ_s$ over which a commonly observed texture transition occurs in characterized AM builds was well-reproduced by ExaCA simulations over a wide range of melt pool shape, hatch spacing, and layer height. ExaCA simulations with 90 degree rotation of the scan direction on every other layer reproduced a number of trends from the AM literature including grain refinement, the dominance of layers with larger melt pools on the final grain structure, and the weakening or strengthening of texture depending on odd and even layer melt pool overlap geometry. EBSD data from a benchmark AM part is used to validate the simulated mechanism of a layer rotation-induced texture strengthening effect. Importantly, these results expand the understanding of the mechanisms for texture selection in alloys with cubic crystal symmetry and offer an approach to easily evaluate processing conditions. With this new understanding, these modeling tools will enable anticipation of previously unexpected variations in grain structure and target specific microstructures and properties.

36 MATERIALS SCIENCE↗

Results of an interlaboratory study on the working curve in vat photopolymerization II: Towards a standardized method

The working curve measurement in photopolymer additive manufacturing is a ubiquitous measure of the cure depth of a printing resin as a function of radiant exposure of light. The fit parameters from this measurement (the depth of light penetration D p and the critical exposure E c ) are used to evaluate and report a resin’s printability, optimize processing parameters, and inform print and resin quality control. Despite its widespread use, the working curve lacks a standard measurement method. Here, following up on our paper “Results of an Interlaboratory Study on the Working Curve in Vat Photopolymerization” from last year, an interlaboratory study on the working curve was performed using calibrated, reproducible, bandpass filtered light sources. With these light sources, the variability between labs in measured working curves was dramatically reduced from the initial interlaboratory study. Aggregate data from this experiment produced reliable D p and E c measurements at 385 nm of 39.2 ± 3.7 µm and 12.3 ± 3.0 mJ cm −2 , respectively. At 405 nm the values of D p and E c are 69.3 ± 3.8 µm and 17.9 ± 2.3 mJ cm −2 , respectively. The results are agnostic to the thickness measurement tool utilized by participants, ensuring broad applicability across laboratories. We also tested the generalizability of the proposed method of using a filtered light source by filtering a commercial 405 nm light source and obtaining a working curve in agreement with the aggregate data from the interlaboratory study. This interlaboratory study provides a basis for a documentary standard for the working curve, so that the entire photopolymer additive manufacturing industry can share reproducible and interoperable working curve data.

36 MATERIALS SCIENCE↗

Systematics of the α-decay fine structure in even–even nuclei

We describe α-transitions to low-lying states in even–even nuclei with Z>50,N>82 using the Coherent State Model (CSM). We reproduce the energy levels and electromagnetic transition rates between the states of the ground band employing two parameters, namely the deformation parameter and the strength of the harmonic CSM Hamiltonian. The B(E2) values are described in terms of an effective charge which depends linearly on the deformation parameter. The treatment of the α-emission process is based on an α–daughter interaction containing a monopole component, calculated through a double folding procedure with a M3Y interaction plus a repulsive core simulating the Pauli principle, and a quadrupole–quadrupole (QQ) interaction. The decaying states are identified with the lowest narrow outgoing resonances obtained through the coupled channels method. The α-branching ratios to 2{sup +} states are reproduced by means of the QQ strength. This interaction strength can be fitted with a linear dependence on the deformation parameter, as predicted by the CSM. The theoretical intensities to 4{sup +} and 6{sup +} states are in reasonable agreement with available experimental data. Predictions are made for spherical, transitional and well deformed even–even α-emitters.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modeling variability in porescale multiphase flow experiments

Microfluidic devices and porescale numerical models are commonly used to study multiphase flow in biological, geological, and engineered porous materials. In this work, we perform a set of drainage and imbibition experiments in six identical microfluidic cells to study the reproducibility of multiphase flow experiments. We observe significant variations in the experimental results, which are smaller during the drainage stage and larger during the imbibition stage. We demonstrate that these variations are due to sub-porescale geometry differences in microcells (because of manufacturing defects) and variations in the boundary condition (i.e.,fluctuations in the injection rate inherent to syringe pumps). Computational simulations are conducted using commercial software STAR-CCM+, both with constant and randomly varying injection rate. Stochastic simulations are able to capture variability in the experiments associated with the varying pump injection rate.

54 ENVIRONMENTAL SCIENCES↗

Noise-aware optimization in nominally identical manufacturing and measuring systems for high-throughput parallel workflows

Device-to-device variability in experimental noise critically impacts reproducibility, especially in automated, high-throughput systems like additive manufacturing farms. While manageable in small labs, such variability can escalate into serious risks at larger scales, such as architectural 3D printing, where noise may cause structural or economic failures. This contribution presents a noise-aware decision-making algorithm that quantifies and models device-specific noise profiles to manage variability adaptively. It uses distributional analysis and pairwise divergence metrics with clustering to choose between single-device and robust multi-device Bayesian optimization strategies. Unlike conventional methods that assume homogeneous devices or enforce generic robustness, the proposed framework explicitly determines whether shared optimization across devices is appropriate based on the degree of inter-device noise heterogeneity. This enables improved performance, reproducibility, and efficiency. An experimental case study involving three nominally identical 3D printers (same brand, model, and close serial numbers) demonstrates reduced redundancy, lower resource usage, and improved reliability, along with improved convergence stability and solution quality through the selection of the appropriate optimization strategy based on the degree of inter-device noise heterogeneity. Overall, this framework establishes a general approach for precision- and resource-aware optimization in scalable, automated experimental platforms, demonstrated here on a representative multi-device 3D printing case study.

Schenk, Christina↗

Quantifying carbon budget, crop yields and their responses to environmental variability using the ecosys model for U.S. Midwestern agroecosystems

As one of the major agricultural production areas in the world, the United States (U.S.) Midwest plays a vital role in the global food supply and agricultural ecosystem services. Although significant efforts have been made in modeling the carbon cycle dynamics over this area, large uncertainty still exists in the previous simulations in terms of reproducing individual components of the carbon cycle and their responses to environmental variability. Here we evaluated the performance of an advanced agroecosystem model, ecosys, in simulating carbon budgets over the U.S. Midwest, considering both the magnitude of carbon flux/yield and its response to environmental (climate and soil) variability. We conducted model simulations and evaluations at 7 cropland eddy-covariance sites as well as over 293 counties of Illinois, Indiana, and Iowa in the U.S. Midwest. The site-level simulations showed that ecosys captured both the magnitude and seasonal patterns of carbon fluxes (i.e., net ecosystem carbon exchange (NEE), ecosystem gross primary production (GPP), and ecosystem respiration (Reco)), leaf area index (LAI), and dynamic plant carbon allocation processes, with R2 equal to 0.92, 0.87, 0.87, and 0.78 for GPP, NEE, Reco, and LAI, respectively across all the sites compared with the observations. For regional scale simulations, ecosys reproduced the spatial distribution and interannual variability of corn and soybean yields with the constraints of observed yields and a new remotely sensed GPP product, with R2 of multi-year averaged simulated and observed yield equal 0.83 and 0.80 for corn and soybean, respectively. The simulated responses of carbon cycle dynamics to environmental variability were consistent with that from the empirical observations at both site and regional scales. Furthermore, our results demonstrated the applicability of ecosys in simulating the carbon cycle and soil carbon dynamics of the U.S. Midwestern agroecosystems under different climate and soil conditions.

54 ENVIRONMENTAL SCIENCES↗

Characterizing agricultural impacts of recent large-scale US droughts and changing technology and management

Process-based agricultural models, applied in novel ways, can reproduce historical crop yield anomalies in the US, with median absolute deviation from observations of 6.7% at national-level and 11% at state-level. In seasons for which drought is the overriding factor, performance is further improved. Historical counterfactual scenarios for the 1988 and 2012 droughts show that changes in agricultural technologies and management have reduced system-level drought sensitivity in US maize production by about 25% in the intervening years. Finally, we estimate the economic costs of the two droughts in terms of insured and uninsured crop losses in each US county (for a total, adjusted for inflation, of 9 billion USD in 1988 and 21.6 billion USD in 2012). We compare these with cost estimates from the counterfactual scenarios and with crop indemnity data where available. Model-based measures are capable of accurately reproducing the direct agro-economic losses associated with extreme drought and can be used to characterize and compare events that occurred under very different conditions. This study suggests new approaches to modeling, monitoring, forecasting, and evaluating drought impacts on agriculture, as well as evaluating technological changes to inform adaptation strategies for future climate change and extreme events.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Hybrid super homogenization and discontinuity factor method for continuous finite element diffusion

This paper presents a novel homogenization equivalence technique aiming to simultaneously leveragethe simplicity of the Super Homogenization (SPH) method to reproduce reference reaction rates andthe ability to preserve reference leakage rates at desired surfaces through Discontinuity Factors (DF).The need for this new class of methods arises from the inability of the current state-of-the-art SPH technology to properly reproduce the reactor multiplication factor for problems with significant leakage. This work shows that this defect lies in the use of normalization factors in the SPH algorithm: while they are necessary with purely reflecting problems to ensure uniqueness of the solution, they introduce homogenization inconsistencies if at least one vacuum boundary condition is present. Two solutions to this problem are presented in this work: (i) to simply remove the normalization factor or (ii) to introduce additional degrees of freedom in the form of DFs in such a way that the normalization factors can still constrain the problem. While the former clearly offers unrivaled simplicity and can lead to very satisfactory results for leakage-dominated cores or if spatial restriction of the SPH regions is applied – as demonstrated for the High Temperature Test Reactor, the latter is more robust and does not require to scale the fission terms with the reference eigenvalue.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Non-perturbative methods for a chiral effective field theory of finite density nuclear systems

Recently we have developed a novel chiral power counting scheme for an effective field theory of nuclear matter with nucleons and pions as degrees of freedom . It allows for a systematic expansion taking into account both local as well as pion-mediated multi-nucleon interactions. We apply this power counting in the present study to the evaluation of the pion self-energy and the energy density in nuclear and neutron matter at next-to-leading order. To implement this power counting in actual calculations we develop here a non-perturbative method based on Unitary Chiral Perturbation Theory for performing the required resummations. We show explicitly that the contributions to the pion self-energy with in-medium nucleon-nucleon interactions to this order cancel. The main trends for the energy density of symmetric nuclear and neutron matter are already reproduced at next-to-leading order. In addition, an accurate description of the neutron matter equation of state, as compared with sophisticated many-body calculations, is obtained by varying only slightly a subtraction constant around its expected value. The case of symmetric nuclear matter requires the introduction of an additional fine-tuned subtraction constant, parameterizing the effects from higher order contributions. With that, the empirical saturation point and the nuclear matter compressibility are well reproduced while the energy per nucleon as a function of density closely agrees with sophisticated calculations in the literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Finite range and upper branch effects on itinerant ferromagnetism in repulsive Fermi gases: Bethe–Goldstone ladder resummation approach

We investigate the ferromagnetic transition in repulsive Fermi gases at zero temperature with upper branch and effective range effects. Based on a general effective Lagrangian that reproduces precisely the two-body s-wave scattering phase shift, we obtain a nonperturbative expression of the energy density as a function of the polarization by using the Bethe–Goldstone ladder resummation. For hard sphere potential, the predicted critical gas parameter k{sub F}a=0.816 and the spin susceptibility agree well with the results from fixed-node diffusion Monte Carlo calculations. In general, positive and negative effective ranges have opposite effects on the critical gas parameter k{sub F}a: While a positive effective range reduces the critical gas parameter, a negative effective range increases it. For attractive potential or Feshbach resonance model, the many-body upper branch exhibits an energy maximum at k{sub F}a=α with α=1.34 from the Bethe–Goldstone ladder resummation, which is qualitatively consistent with experimental results. The many-body T-matrix has a positive-energy pole for k{sub F}a>α and it becomes impossible to distinguish the bound state and the scattering state. These positive-energy bound states become occupied and therefore the upper branch reaches an energy maximum at k{sub F}a=α. In the zero range limit, there exists a narrow window (0.86<k{sub F}a<1.56) for the ferromagnetic phase. At sufficiently large negative effective range, the ferromagnetic phase disappears. On the other hand, the appearance of positive-energy bound state resonantly enhances the two-body decay rate around k{sub F}a=α and may prevent the study of equilibrium phases and ferromagnetism of the upper branch Fermi gas. - Highlights: • Nonperturbative interaction energy is obtained within the Bethe–Goldstone ladder resummation approach. • Positive and negative effective ranges have opposite effects on the critical gas parameter. • The upper branch Fermi gas exhibits an energy maximum and reentrant ferromagnetic transition. • The ferromagnetic phase disappears for large and negative effective ranges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advances in the calculation of optical properties in superlattices; novel insights derived from the theory of finite periodic systems

Highlights: • Truly quantum calculation of optical properties in superlattices. • An approach that goes beyond the abilities of the current approaches in the literature. • Accurate calculations based on bona fide superlattice eigenvalues and eigenfunctions. • Accurate calculation of optical-transition matrix elements and new selection rules. • Optical spectra of AlGaAs and InGaN superlattices agree with experimental results. • Optical spectra features of blue diodes faithfully reproduced and fully explained. • Unexplained lines in high-resolution spectra assigned to surface and edge states. - Abstract: Using the genuine superlattice eigenvalues and eigenfunctions, and their parity symmetries, new transition selection rules are derived, and a novel approach for the explicit calculation of the optical spectra of periodic structures presented. The optical response and infrared spectra published in the last 40 years for (In, Ga)N and (Al, Ga)As superlattices, with different number of unit cells n (varying from ∼10 to ∼400) and barrier and valley widths in the range of 2.5 nm to 40 nm, and different properties have been revisited. Among the various examples discussed here, we study the narrow peaks clustered in groups reported in high resolution spectra of blue-emitting devices, that could not be explained until now. These properties are faithfully reproduced and fully understood. We show that these effects are related to and depend on the surface energy levels and their tuneable detachment. We shown also that the optical transitions experimentally observed, but forbidden by the current optical physics, are really allowed transitions. Since the number of energy eigenvalues E{sub μ,ν}{sup r,v} and eigenfunctions Ψ{sub μ{sup ′},ν{sup ′r,v}}(z) is now much greater, the number of allowed matrix-elements can be extremely large (of the order of n{sup 2} n{sub c}n{sub v}∕2, with n{sub c} and n{sub v} the number of subbands in the conduction and valence bands). We show that this number can be reduced by using the eigenfunctions’ symmetries, which are behind the parity symmetry selection rules and the leading order selection rules. These rules reduce the number of matrix-elements evaluations from ∼n{sup 2}n{sub c}n{sub v}∕2 to ∼nn{sub c}n{sub v}∕2, i.e., depending on the superlattice, from about 1000 to 100. We discuss also a third rule, that collects the contributions of the surface and edge states, reducing the number of transitions even more to N{sub s}≤n{sub c}n{sub v}. With these rules, the main peaks are conserved and their number practically matches that of the real spectrum. Excellent agreements are found with experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Numerical analysis of experimental studies of methane hydrate dissociation induced by depressurization in a sandy porous medium

Methane Hydrates (MHs) are a promising energy source abundantly available in nature. Understanding the complex processes of MH formation and dissociation is critical for the development of safe and efficient technologies for energy recovery. Many laboratory and numerical studies have investigated these processes using synthesized MH-bearing sediments. A near-universal issue encountered in these studies is the spatial heterogeneous hydrate distribution in the testing apparatus. In the absence of direct observations (e.g. using X-ray computed tomography) coupled with real time production data, the common assumption made in almost all numerical studies is a homogeneous distribution of the various phases. In an earlier study (Yin et al., 2018) that involved the numerical description of a set of experiments on MH-formation in sandy medium using the excess water method, we showed that spatially heterogeneous phase distribution is inevitable and significant. In the present study, we use as a starting point the results and observations at the end of the MH formation and seek to numerically reproduce the laboratory experiments of depressurization-induced dissociation of the spatially-heterogeneous MH distribution. This numerical study faithfully reproduces the geometry of the laboratory apparatus, the initial and boundary conditions of the system, and the parameters of the dissociation stimulus, capturing accurately all stages of the experimental process. Using inverse modelling (history-matching) that minimized deviations between the experimental observations and numerical predictions, we determined the values of all the important flow, thermal, and kinetic parameters that control the system behaviour, which yielded simulation results that were in excellent agreement with the measurements of key monitored variables, i.e. pressure, temperature, cumulative production of gas and water over time. We determined that at the onset of depressurization (when the pressure drop – the driving force of dissociation – is at its maximum), the rate of MH dissociation approaches that of an equilibrium reaction and is limited by the heat transfer from the system surroundings. Furthermore, as the effect of depressurization declines over time, the dissociation reaction becomes kinetically limited despite significant heat inflows from the boundaries, which lead to localized temperature increases in the reactor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO 2 leakage impacts on shallow groundwater. Field-scale reactive-transport simulations informed by observations at a natural analog site

It is challenging to predict the degree to which shallow groundwater might be affected by leaks from a CO 2 sequestration reservoir, particularly over long time scales and large spatial scales. In this study observations at a CO 2 enriched shallow aquifer natural analog were used to develop a predictive model which is then used to simulate leakage scenarios. This natural analog provides the opportunity to make direct field observations of groundwater chemistry in the presence of elevated CO 2 , to collect aquifer samples and expose them to CO 2 under controlled conditions in the laboratory, and to test the ability of multiphase reactive transport models to reproduce measured geochemical trends at the field-scale. The field observations suggest that brackish water entrained with the upwelling CO 2 are a more significant source of trace metals than in situ mobilization of metals due to exposure to CO 2 . The study focuses on a single trace metal of concern at this site: U. Experimental results indicate that cation exchange/adsorption and dissolution/precipitation of calcite containing trace amounts of U are important reactions controlling U in groundwater at this site, and that the amount of U associated with calcite is fairly well constrained. Simulations incorporating these results into a 3-D multi-phase reactive transport model are able to reproduce the measured ranges and trends between pH, pCO 2 , Ca, total C, U and Cl - at the field site. Although the true fluxes at the natural analog site are unknown, the cumulative CO 2 flux inferred from these simulations are approximately equivalent to 37.8E-3 MT, approximately corresponding to a .001% leak rate for injection at a large (750 MW) power plant. The leakage scenario simulations suggest that if the leak only persists for a short time the volume of aquifer contaminated by CO 2 -induced mobilization of U will be relatively small, yet persistent over 100 a.

54 ENVIRONMENTAL SCIENCES↗

Isospin symmetry holds beyond the proton drip line: First observation of excited states in 55Cu

Isospin symmetry, combined with shell-model description, has long been successful in reproducing nuclear structure and predicting mirror energy differences. However, these descriptions have been primarily limited to mirror nuclei with well-bound ground states. As one approaches the proton drip line, coupling to the continuum becomes important. Despite this, little is known about medium-mass nuclei at the drip line. Here we report the measurement of the excitation energies of several unbound states in a nucleus beyond the proton drip line, 55Cu, performed via γ-ray spectroscopy at the Radioactive Isotope Beam Factory (RIKEN). Several low-lying yrast states are observed to decay predominantly by γ-ray emission. In contrast, the state–predicted to be strongly populated in the one-proton knockout reaction–is notably absent, suggesting that it decays primarily via prompt proton emission. We show that even for such an unbound system, shell-model calculations based on a harmonic oscillator potential reproduce the observed mirror energy differences remarkably well in all the observed states. Based on this result, we propose that a general pattern might emerge where, in medium-mass systems at the proton drip line, the stronger Coulomb barrier together with the centrifugal barrier effectively confines the wave functions, so that the shell model is able to describe low-lying states, enabling accurate predictions of mirror energy differences between isobaric analogue states.

Pigliapoco, S [Dipartimento di Fisica e Astronomia↗

Exosomal proteome analysis of human plasma to monitor sepsis progression

Highlights: • As low as 300 μL human plasma is sufficient for exosome isolation using our one-step density gradient ultracentrifugation. • Protein profiling of septic plasma exosomes are closely related to immune responses. • SPTLC3 may play important roles in development of sepsis. Exosomes are cell-derived vesicles containing RNA, lipid, and protein, which act in body immune response, intercellular signaling and some other important biological processes. Exosomes have been extensively studied in the past several years on their disease related mechanisms and potential roles to monitor disease progression as biomarkers. Compared with analyzing exosome RNA, comprehensive proteome profiling of exosomes in clinical samples (e.g. blood) are highly demanded but limited mainly due to lack of a reproducible method for efficient exosome extraction. In this study, we evaluated and optimized an exosome preparation approach using one-step ultracentrifugation through an Optiprep™ cushion. Exosomes prepared via this method and analyzed by mass spectrometry using Q-Exactive plus, has led to reproducible identification and quantification of 200 + proteins from human plasma samples of as little as 300 μL. Therefore, such a straightforward exosome extract method has enable us to deeply profile exosome proteomes from human blood at a scale of clinical studies. As a proof of principal, we practiced this approach in analyzing the exosome proteomic profiles of blood samples collected from a sepsis patient during six time points after diagnosis. Among the 238 proteins identified and quantified across the 6 samples, protein SPTLC3 involved in the sphingolipid metabolism, shows a negative correlation (p = 0.02, correlation coefficient = −0.984) with disease progression indicated by body temperature (BD) and C-reactive protein (CRP). Therefore, SPTLC3 could be an interesting target for future study on molecular mechanism of sepsis development, as well as potential classifier to monitor clinical progression of sepsis.

60 APPLIED LIFE SCIENCES↗

A spherical aberration-free microscopy system for live brain imaging

Highlights: • Deep-C is an automatic spherical aberration compensation system for in vivo imaging. • Deep-C is composed of ZlinC and Peak-C. • ZlinC coordinates the correction collar rotation and the Z-position of an objective. • Peak-C is a scanning algorithm processor for calculation of image contrast. • Deep-C allows quantitative, reproducible analysis of fine GFP-labeled structures. The high-resolution in vivo imaging of mouse brain for quantitative analysis of fine structures, such as dendritic spines, requires objectives with high numerical apertures (NAs) and long working distances (WDs). However, this imaging approach is often hampered by spherical aberration (SA) that results from the mismatch of refractive indices in the optical path and becomes more severe with increasing depth of target from the brain surface. Whereas a revolving objective correction collar has been designed to compensate SA, its adjustment requires manual operation and is inevitably accompanied by considerable focal shift, making it difficult to acquire the best image of a given fluorescent object. To solve the problems, we have created an objective-attached device and formulated a fast iterative algorithm for the realization of an automatic SA compensation system. The device coordinates the collar rotation and the Z-position of an objective, enabling correction collar adjustment while stably focusing on a target. The algorithm provides the best adjustment on the basis of the calculated contrast of acquired images. Together, they enable the system to compensate SA at a given depth. As proof of concept, we applied the SA compensation system to in vivo two-photon imaging with a 25 × water-immersion objective (NA, 1.05; WD, 2 mm). It effectively reduced SA regardless of location, allowing quantitative and reproducible analysis of fine structures of YFP-labeled neurons in the mouse cerebral cortical layers. Interestingly, although the cortical structure was optically heterogeneous along the z-axis, the refractive index of each layer could be assessed on the basis of the compensation degree. It was also possible to make fully corrected three-dimensional reconstructions of YFP-labeled neurons in live brain samples. Our SA compensation system, called Deep-C, is expected to bring out the best in all correction-collar-equipped objectives for imaging deep regions of heterogeneous tissues.

60 APPLIED LIFE SCIENCES↗

MYPT1 is targeted by miR-145 inhibiting viability, migration and invasion in 2D and 3D HeLa cultures

Highlights: • miR-143/145 affect viability, migration and invasion on monolayer and spheroid cultures. • miR-145 produces a stronger inhibitory effect and increases pMLC levels through MYPT1 targeting. • MYPT1 silencing by siRNAs reproduces miR-145 effects. The miR-143/145 cluster is down-regulated in cervical tumor cells suggesting a role in tumorigenesis including cytoskeleton remodeling, a key event for tumor progression. The aim of the present work was to determine the role of miR-143/145 in the modulation of the myosin regulator phospho-myosin light chain (pMLC). HeLa monolayer and tridimensional cultures were transfected with miR-143 or miR-145 mimics inhibiting cell viability, proliferation, migration and invasion, mainly through miR-145. MiR-145 transfection increased pMLC levels by targeting the MYPT1 subunit of the regulatory myosin phosphatase. MYPT1 knockdown by siRNAs reproduced miR-145 effects suggesting miR-145 as a tumor suppressor through MYPT1 targeting, leading to a subsequent increase of pMLC levels with implications for cervical cell viability, migration and invasion.

60 APPLIED LIFE SCIENCES↗