Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radio frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

NASA Near Earth Network (NEN) DVB-S2 Demonstration Testing for Enhancing Higher Data Rates for CubeSat/Small Satellite Missions at X-/Ka-band

National Aeronautics and Space Administration (NASA) CubeSat/SmallSat missions are moving to higher data rates. Digital Video Broadcast, Satellite Second Generation (DVB-S2) is a communications standard that uses power and bandwidth efficient modulation and coding techniques to deliver performance approaching radio frequency (RF) channel theoretical limits. The Near Earth Network (NEN) will test DVB-S2’s ability to provide higher data rates for CubeSat/SmallSat missions at X-band and Ka-band at Wallops Flight Facility (WFF). The goal is to upgrade the NEN with DVB-S2 to increase science data return for missions and enable support for more CubeSat/SmallSat missions. This paper describes NEN DVB-S2 X-band and Ka-band demonstration objectives, scope, and performance measures as well as NEN channel test configuration. The NEN has planned 2020 tests to demonstrate all modulation and coding schemes in the Consultative Committee for Space Data Systems (CCSDS) DVB-S2 standard over X-band and Ka-band. A link analysis study for the trade-offs among achievable data rates, modulations, codes, spacecraft antenna sizes and power amplifiers (PA) is provided. This paper identifies Commercial off-the-shelf (COTS) CubeSat/SmallSat X-band and Ka-band communication systems and discusses low cost DVB-S2 X-band software defined radio (SDR) transmitter development concepts and implementation with a practical system for CubeSats/SmallSats.

Yen Wong↗
NASA NTRS2004

Simultaneous Multiwavelength Monitoring of 3C66A

The radio-selected BL Lac object 3C66A was the target of an intensive multiwavelength campaign from Sept. 2003 through Feb. 2004. It was monitored by the Whole Earth Blazar Telescope (WEBT) collaboration, in tandem with 20 X-ray monitoring observations by the Rossi X-Ray Timing Explorer (RXTE), VHE gamma-ray observations by STACEE and VERITAS, and long-term monitoring at radio frequencies. In addition. 9 observations using the VLBA are being carried out during the campaign and throughout the year 2004 to follow possible structural changes of the source. 21 pointings with RXTE during the period Sept. 15 - Dec. 27, 2003. All collected data have been fully analyzed, and first results have already been published at the 8th HEAD Meeting in New Orleans, LA, in Sept. 2004, and will also be presented at the 205th AAS Meeting in San Diego, CA, in Jan. 2005. A first Journal paper, to be submitted to the Astrophysical Journal, is currently in preparation, and we plan to have it ready for submission in January 2005. A gradual brightening of the source over the course of the campaign was observed at all optical frequencies, culminating in a very bright flare at the end of January 2004. Optical light curves indicate intraday microvariability on time scales down to about 1.3 hours. No significant color-magnitude correlation for the entire data set was evident, but there is a slight indication of a gradual spectral softening in the optical over the entire duration of multi-day outbursts (in both the rising and decaying phase). The X-ray spectrum is consistent with a power-law with a photon spectral index of approx. 2.1, indicating that the RXTE energy band might be located right at the intersection of the synchrotron and the high-energy emission components. No significant flux or spectral variability at X-ray energies was detected, though there seems to be a trend of very modest brightening in tandem with the optical flux. The first 4 VLBA epochs indicate a rather smooth jet with only very moderate internal structure. After decomposition in Gaussian components, evidence for superluminal motion (11.0+/-4.7/h c) was found in only one out of 6 jet components. The radial radio brightness profile suggests a magnetic field decay infinity/r and, thus, a predominantly perpendicular magnetic field orientation.

Boettcher, M.↗
NASA NTRS2007

Calibration Test Set for a Phase-Comparison Digital Tracker

An apparatus that generates four signals at a frequency of 7.1 GHz having precisely controlled relative phases and equal amplitudes has been designed and built. This apparatus is intended mainly for use in computer-controlled automated calibration and testing of a phase-comparison digital tracker (PCDT) that measures the relative phases of replicas of the same X-band signal received by four antenna elements in an array. (The relative direction of incidence of the signal on the array is then computed from the relative phases.) The present apparatus can also be used to generate precisely phased signals for steering a beam transmitted from a phased antenna array. The apparatus (see figure) includes a 7.1-GHz signal generator, the output of which is fed to a four-way splitter. Each of the four splitter outputs is attenuated by 10 dB and fed as input to a vector modulator, wherein DC bias voltages are used to control the in-phase (I) and quadrature (Q) signal components. The bias voltages are generated by digital-to-analog- converter circuits on a control board that receives its digital control input from a computer running a LabVIEW program. The outputs of the vector modulators are further attenuated by 10 dB, then presented at high-grade radio-frequency connectors. The attenuation reduces the effects of changing mismatch and reflections. The apparatus was calibrated in a process in which the bias voltages were first stepped through all possible IQ settings. Then in a reverse interpolation performed by use of MATLAB software, a lookup table containing 3,600 IQ settings, representing equal amplitude and phase increments of 0.1 , was created for each vector modulator. During operation of the apparatus, these lookup tables are used in calibrating the PCDT.

Boas, Amy↗
NASA NTRS2011

Performance Comparison of Wireless Sensor Network Standard Protocols in an Aerospace Environment: ISA100.11a and ZigBee

Wireless Sensor Networks (WSNs) can provide a substantial benefit in spacecraft systems, reducing launch weight and providing unprecedented flexibility by allowing instrumentation capabilities to grow and change over time. Achieving data transport reliability on par with that of wired systems, however, can prove extremely challenging in practice. Fortunately, much progress has been made in developing standard WSN radio protocols for applications from non-critical home automation to mission-critical industrial process control. The relative performances of candidate protocols must be compared in representative aerospace environments, however, to determine their suitability for spaceflight applications. In this paper, we will present the results of a rigorous laboratory analysis of the performance of two standards-based, low power, low data rate WSN protocols: ZigBee Pro and ISA100.11a. Both are based on IEEE 802.15.4 and augment that standard's specifications to build complete, multi-hop networking stacks. ZigBee Pro targets primarily the home and office automation markets, providing an ad-hoc protocol that is computationally lightweight and easy to implement in inexpensive system-on-a-chip components. As a result of this simplicity, however, ZigBee Pro can be susceptible to radio frequency (RF) interference. ISA100.11a, on the other hand, targets the industrial process control market, providing a robust, centrally-managed protocol capable of tolerating a significant amount of RF interference. To achieve these gains, a coordinated channel hopping mechanism is employed, which entails a greater computational complexity than ZigBee and requires more sophisticated and costly hardware. To guide future aerospace deployments, we must understand how well these standards relatively perform in analog environments under expected operating conditions. Specifically, we are interested in evaluating goodput -- application level throughput -- in a representative crewed environment in the presence of varying levels of 802.11g Wi-Fi traffic. To do so, we use the NASA Johnson Space Center Wireless Habitat Testbed (WHT), a metallic, habitation-sized module designed for co-existence testing of wireless systems. In its quiescent state, the sealed WHT provides an RF-quiet environment to which we can selectively add interfering systems; it also provides a realistic level of multi-path self-interference for systems under investigation. In our test, we deploy two representative five node networks, configured in a star topology with all nodes reporting directly to a WSN gateway. Each ZigBee network WSN node is built using a Texas Instruments (TI) CC2530 system-on-a-chip radio running TI's ZigBee Pro Z-stack. Each ISA100.11a network node is built using a Nivis VersaNode 210 system-on-a-chip radio. In both cases, radios interface with TI MSP430-F5438 microcontroller implementing a common test application. Interference is provided by a D-link 802.11g Wi-Fi router transporting traffic generated using the Iperf network testing tool. For the single-channel ZigBee network, effects of both direct and indirect Wi-Fi interference are evaluated. For the channel-hopping ISA100.11a network, effects of interference from multiple Wi-Fi routers configured in non-overlapping 802.11g channels are evaluated. Our results show that, in general, the more lightweight ZigBee network performs well at low interference levels, but performance degrades as interference increases. Conversely, the more complex and costly ISA100.11a network continues to perform well as Wi-Fi interference levels increase.

Wagner, Raymond S.↗
NASA NTRS1989

VLSI processors for signal detection in SETI

The objective of the Search for Extraterrestrial Intelligence (SETI) is to locate an artificially created signal coming from a distant star. This is done in two steps: (1) spectral analysis of an incoming radio frequency band, and (2) pattern detection for narrow-band signals. Both steps are computationally expensive and require the development of specially designed computer architectures. To reduce the size and cost of the SETI signal detection machine, two custom VLSI chips are under development. The first chip, the SETI DSP Engine, is used in the spectrum analyzer and is specially designed to compute Discrete Fourier Transforms (DFTs). It is a high-speed arithmetic processor that has two adders, one multiplier-accumulator, and three four-port memories. The second chip is a new type of Content-Addressable Memory. It is the heart of an associative processor that is used for pattern detection. Both chips incorporate many innovative circuits and architectural features.

NASA Program Exobiology↗
NASA NTRS1965

Solid-state laser transmitter is amplitude modulated

Amplitude modulated laser transmitter affords radio frequencies unlimited bandwidth. The system, which is solid state and compact, uses a gallium arsenide diode that emits in the near infrared.

Bilderback, R.↗
NASA NTRS1965

An analysis of project high water data

Optical and radio frequency electromagnetic observations of high water release in ionosphere and atmospheric turbulence following liquid release in space

HIGH WATER PROJECT↗
NASA NTRS1966

Thermodynamic Equilibrium in the Origin of Organic Matter

Theoretical and experimental support is presented for the hypothesis that organic compounds occurring in carbonaceous chondrites may have formed under equilibrium or near equilibrium conditions. The equilibrium distributions of organic compounds at temperature between 300 and 1000 K and pressures of 10(exp 16) to 50 atmospheres for the C-H-O system have been computed. At high temperatures and low pressures aromatic compounds may form even in the presence of excess hydrogen. Equilibrium concentrations of numerous compounds possible at 1000 K when N, S, and C1 are added to the system have also been determined. A limited equilibrium method is employed in which those few compounds which form with most difficulty are excluded from the computations. This approach is shown to be useful in the interpretation of certain experimental data. In preliminary experiments it has been found that gases, converted to the plasma state by high energy radio frequency discharge, yield product mixtures which are in qualitative agreement with those predicted.

CHEMICAL EQUILIBRIUM↗
NASA NTRS1967

Low speed, long term tracking electric drive system has zero backlash

Electric drive system provides low speed, long term tracking of targets that move at a sidereal rate. It utilizes eddy-current energized actuators that are free from radio frequency interference generation and a solid state feedback amplifier with provisions for antibacklash biasing.

Richter, H. L.↗