Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Power consistency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Investigation on the electron flux to the wall in the VENUS ion source

The long-term operation of high charge state electron cyclotron resonance ion sources fed with high microwave power has caused damage to the plasma chamber wall in several laboratories. Porosity, or a small hole, can be progressively created in the chamber wall which can destroy the plasma chamber over a few year time scale. A burnout of the VENUS plasma chamber is investigated in which the hole formation in relation to the local hot electron power density is studied. First, the results of a simple model assuming that hot electrons are fully magnetized and strictly following magnetic field lines are presented. The model qualitatively reproduces the experimental traces left by the plasma on the wall. However, it is too crude to reproduce the localized electron power density for creating a hole in the chamber wall. Second, the results of a Monte Carlo simulation, following a population of scattering hot electrons, indicate a localized high power deposited to the chamber wall consistent with the hole formation process. Finally, a hypervapotron cooling scheme is proposed to mitigate the hole formation in electron cyclotron resonance plasma chamber wall.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effect of radio frequency discharge power on dusty plasma parameters

The parameters of a two-dimensional dusty plasma consisting of six, 9 mum diameter particles trapped inside a radio frequency (rf) plasma sheath have been measured as a function of rf power in a 13.5 mtorr (1.8 Pa) argon discharge. The center-of-mass and breathing frequencies are found by projecting the cluster's Brownian motion onto the associated normal mode. The center-of-mass frequency (i.e., radial confinement) is insensitive to rf power. The Debye shielding parameter kappa, as found from the breathing frequency, increases from approx =0.5 to 2 as the square root of rf power. The Debye length decreases from approx =2.7 to 0.7 mm as the inverse of the square root of rf power. The average particle charge qapprox =-17 000e is effectively independent of rf power. These results are consistent with an electron temperature that is independent of rf power and an ion density that is directly proportional to rf power, where the Debye length is determined by the ion density in combination with the electron temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental and Computational Studies on Collective Hydrogen Dynamics in Ammonia Borane: Incoherent Inelastic Neutron Scattering

Incoherent inelastic neutron scattering can be used as a sensitive probe of the vibrational dynamics in chemical hydrogen storage materials. Thermal neutron energy loss measurements at 10K are presented and compared to the vibrational power spectrum calculated using ab initio molecular dynamics of pure and deuterated ammonia borane (NH3BH3, NH3BD3, and ND3BH3). A harmonic vibrational analysis on NH3BH3 clusters was also explored to check for consistency with experiment and the power spectrum. The measured neutron spectra and computed ab initio power spectrum compare extremely well (50 to 500 cm-1) and some assignment of modes to simple motion is possible, however, it is found that the lowest modes (below 250 cm-1) are dominated by collective motion. This work was supported by the U.S. Department of Energy's (DOE) Office of Basic Energy Sciences, Chemical Sciences program. The Pacific Northwest National Laboratory is operated by Battelle for DOE.

08 HYDROGEN↗

Space Station module Power Management And Distribution (PMAD) system

This project consists of several tasks which are unified toward experimentally demonstrating the operation of a highly autonomous, user-supportive power management and distribution system for Space Station Freedom (SSF) habitation/laboratory modules. This goal will be extended to a demonstration of autonomous, cooperative power system operation for the whole SSF power system through a joint effort with NASA's Lewis Research Center, using their Autonomous Power System. Short term goals for the space station module power management and distribution include having an operational breadboard reflecting current plans for SSF, improving performance of the system communications, and improving the organization and mutability of the artificial intelligence (AI) systems. In the middle term, intermediate levels of autonomy will be added, user interfaces will be modified, and enhanced modeling capabilities will be integrated in the system. Long term goals involve conversion of all software into Ada, vigorous verification and validation efforts and, finally, seeing an impact of this research on the operation of SSF. Conversion of the system to a DC Star configuration is now in progress, and should be completed by the end of October, 1989. This configuration reflects the latest SSF module architecture. Hardware is now being procured which will improve system communications significantly. The Knowledge-Based Management System (KBMS) is initially developed and the rules from FRAMES have been implemented in the KBMS. Rules in the other two AI systems are also being grouped modularly, making them more tractable, and easier to eventually move into the KBMS. Adding an intermediate level of autonomy will require development of a planning utility, which will also be built using the KBMS. These changes will require having the user interface for the whole system available from one interface. An Enhanced Model will be developed, which will allow exercise of the system through the interface without requiring all of the power hardware to be operational. The functionality of the AI systems will continue to be advanced, including incipient failure detection. Ada conversion will begin with the lowest level processor (LLP) code. Then selected pieces of the higher level functionality will be recorded in Ada and, where possible, moved to the LLP level. Validation and verification will be done on the Ada code, and will complete sometimes after completion of the Ada conversion.

Walls, Bryan↗

Full-Shape analysis of the power spectrum and bispectrum of DESI DR1 LRG and QSO samples

We present the first joint analysis of the power spectrum and bispectrum using the Data Release 1 (DR1) of the Dark Energy Spectroscopic Instrument (DESI), focusing on Luminous Red Galaxies (LRGs) and quasars (QSOs) across a redshift range of 0.4 ≤ z ≤ 2.1. By combining the two- and three-point statistics, we are able to partially break the degeneracy between the logarithmic growth rate, f(z), and the amplitude of dark matter fluctuations, σ s8 (z), which cannot be measured separately in analyses that only involve the power spectrum. In comparison with the (fiducial) Planck ΛCDM cosmology we obtain f/f fid = {0.888 -0.089 +0.186 ,0.977 -0.220 +0.182 ,1.030 -0.085 +0.368 }, σ s8 /σ fid s8 = {1.224 -0.133 +0.091 ,1.071 -0.163 +0.278 ,1.00 0 -0.223 +0.088 } respectively for the three LRG redshift bins, corresponding to a cumulative 10.1% constraint on f, and of 8.4% on σ s8 , including the systematic error budget. Additionally, we obtain constraints for the ShapeFit compressed parameters describing the isotropic scaling parameter, α iso (z), the Alcock-Paczyński parameter, α AP (z), the combined growth of structure parameter fσ s8 (z), and the combined shape parameter m(z)+n(z). Their cumulative constraints from our joint power spectrum-bispectrum analysis are respectively σ αiso = 0.9% (9% improvement with respect to our power spectrum-only analysis); σ α AP = 2.3% (no improvement with respect to power spectrum-only analysis, which is expected given that the bispectrum monopole has no significant anisotropic signal); σ fσs8 = 5.1% (9% improvement); σ m+n = 2.3% (11% improvement). These results are fully consistent with the main DESI power spectrum analysis, demonstrating the robustness of the DESI cosmological constraints, and compatible with Planck ΛCDM cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

Analytical study of the cruise performance of a class of remotely piloted, microwave-powered, high-altitude airplane platforms

Each cycle of the flight profile consists of climb while the vehicle is tracked and powered by a microwave beam, followed by gliding flight back to a minimum altitude. Parameter variations were used to define the effects of changes in the characteristics of the airplane aerodynamics, the power transmission systems, the propulsion system, and winds. Results show that wind effects limit the reduction of wing loading and increase the lift coefficient, two effective ways to obtain longer range and endurance for each flight cycle. Calculated climb performance showed strong sensitivity to some power and propulsion parameters. A simplified method of computing gliding endurance was developed.

Morris, C. E. K., Jr.↗

Design of a Modular 5-kW Power Processing Unit for the Next-Generation 40-cm Ion Engine

NASA Glenn Research Center is developing a 5/10-kW ion engine for a broad range of mission applications. Simultaneously, a 5-kW breadboard poster processing unit is being designed and fabricated. The design includes a beam supply consisting of four 1.1 kW power modules connected in parallel, equally sharing the output current. A novel phase-shifted/pulse-width-modulated dual full-bridge topology was chosen for its soft-switching characteristics. The proposed modular approach allows scalability to higher powers as well as the possibility of implementing an N+1 redundant beam supply. Efficiencies in excess of 96% were measured during testing of a breadboard beam power module. A specific mass of 3.0 kg/kW is expected for a flight PRO. This represents a 50% reduction from the state of the art NSTAR power processor.

Pinero, Luis R.↗

Improved Characterization of the Astrophysical Muon–neutrino Flux with 9.5 Years of IceCube Data

We present a measurement of the high-energy astrophysical muon–neutrino flux with the IceCube Neutrino Observatory. The measurement uses a high-purity selection of 650k neutrino-induced muon tracks from the northern celestial hemisphere, corresponding to 9.5 yr of experimental data. With respect to previous publications, the measurement is improved by the increased size of the event sample and the extended model testing beyond simple power-law hypotheses. An updated treatment of systematic uncertainties and atmospheric background fluxes has been implemented based on recent models. The best-fit single power-law parameterization for the astrophysical energy spectrum results in a normalization of ${\phi }_{@100\mathrm{TeV}}^{{\nu }_{\mu }+{\bar{\nu }}_{\mu }}={1.44}_{-0.26}^{+0.25}\times {10}^{-18}\,{\mathrm{GeV}}^{-1}{\mathrm{cm}}^{-2}{{\rm{s}}}^{-1}{\mathrm{sr}}^{-1}$ and a spectral index ${\gamma }_{\mathrm{SPL}}={2.37}_{-0.09}^{+0.09}$, constrained in the energy range from 15 TeV to 5 PeV. The model tests include a single power law with a spectral cutoff at high energies, a log-parabola model, several source-class-specific flux predictions from the literature, and a model-independent spectral unfolding. The data are consistent with a single power-law hypothesis, however, spectra with softening above one PeV are statistically more favorable at a two-sigma level.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of low-power, high-rate PCM telemetry in a helicopter instrumentation system

The use of low-power, high-rate pulse code modulation (PCM) in a helicopter instrumentation system is examined. A Helicopter Instrumentation and Recording System (HIARS) was developed to obtain main rotor blade measurements and fuselage performance measurements. The HIARS consists of a low-power PCM telemeter, a digital PCM system, an optical rotor position sensor, and a PCM decommutation unit; the components and functions of these subsystems are described. Flight tests were conducted to evaluate the ability of the HIARS to measure aircraft parameters. The test data reveal that the PCM telemetry is applicable to helicopter instrumentation systems.

Thomas, Mitchel E.↗

Constraints on cosmological models from the IRAS QDOT survey results

The results of the recent IRAS survey are used to explore constraints on the nature of the Galaxy density field. Realistic simulations of the survey made from N-body simulations of the n = -1 power-law power spectrum and the Omega = 1 CDM models show that the power-law model is basically consistent with all QDOT variance results, while the CDM model has a smaller variance than the observation at the 20/h Mpc Gaussian smoothing scale. It is concluded that the QDOT results are best explained if the power spectrum of the Galaxy density field has a slope of about -1 near a wavelength of about 100/h Mpc, while the CDM model has a slope of about 0 at that scale. The possibility of marginal non-Gaussian behavior at the 20/h Mpc scale reported by Saunders et al. (1990) is examined for gravitational instability models with Gaussian initial conditions. It is argued that the observed (delta exp 3) versus (delta exp 2) in redshift space is not what these models would predict.

Park, Changbom↗

NASA AREAL Testbed and UE Power Quality Testing

A large number of electrified aircraft propulsion systems currently in development consist of high-voltage direct current (HVDC) power systems and utilization equipment (UE). There is a need for industry consensus standards and guidelines in order to support the development and verification of these rapidly maturing systems, user equipment, and associated technologies. To support the aforementioned need, the National Aeronautics and Space Administration (NASA) Revolutionary Vertical Lift Technology (RVLT) Project is performing ongoing power quality testing on HVDC power systems and associated UE. The testing described in this paper describes the UE testing completed to date in the NASA Advanced Reconfigurable Electrified Aircraft Lab (AREAL).

electrified aircraft↗

Effects of Mass Ablation on the Scaling of X-Ray Power with Current in Wire-Array Z Pinches

X-ray production by imploding wire-array Z pinches is studied using radiation magnetohydrodynamics simulation. It is found that the density distribution created by ablating wire material influences both x-ray power production, and how the peak power scales with applied current. For a given array there is an optimum ablation rate that maximizes the peak x-ray power, and produces the strongest scaling of peak power with peak current. This work is consistent with trends in wire-array Z pinch x-ray power scaling experiments on the Z accelerator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The performance of a winged booster powered by combined rocket and airbreathing propulsion

A conceptual level analysis was performed on a horizontal-takeoff, two-stage-to-orbit system consisting of a rocket and turboramjet powered hypersonic booster and a rocket powered orbiter. The analysis includes estimates of vehicle aerodynamics, performance, and weights. Rocket and airbreathing systems on the booster are operated in parallel and at full thrust for ascent to a Mach 6 staging point, while cruise-back is accomplished using airbreathing propulsion alone. Rocket engines on the orbiter are ignited at staging to propel the orbiter. Booster weights were determined for various combinations of rocket and airbreathing propulsion. The combinations that resulted in the lowest vehicle gross and empty weights were determined. Results show that the lowest gross weight occurs when only airbreathing engines are used. The empty weight of the all airbreathing booster, however, is quite high. Significant reductions in booster empty weight is accomplished with the addition of rocket engines. Also, the use of rockets on the booster greatly decreases the time to staging and the cruise-back distance.

Lepsch, Roger A., Jr.↗

Characterization and testing of 30 kV, 60 kW electron optical column for melting applications

High energy electron beams (30-150 keV) are widely used as intense heat source in welding, melting and evaporation of refractory metals. These operations are mostly carried out in high vacuum (10{sup -4}-10{sup -5} mbar) to aid unimpeded flow of electrons from generation to the point of application. A 30 kV, 60 kW Electron beam optical column (EOC) is designed and developed under the high power beam technology programme. The optical column consists of an electron gun and twin electromagnetic focusing lenses. The heating power of emitter, gun perveance, grid voltage control, beam focusing with the twin electromagnetic lenses and beam spot size measurements are reported in this paper. The results are compared with the design values. Operational issues during the high power melting and the strategy for automation of the electron gun are discussed. (author)

43 PARTICLE ACCELERATORS↗

Regression analysis of technical parameters affecting nuclear power plant performances

Since the 80's many studies have been conducted in order to explicate good and bad performances of commercial nuclear power plants (NPPs), but yet no defined correlation has been found out to be totally representative of plant operational experience. In early works, data availability and the number of operating power stations were both limited; therefore, results showed that specific technical characteristics of NPPs were supposed to be the main causal factors for successful plant operation. Although these aspects keep on assuming a significant role, later studies and observations showed that other factors concerning management and organization of the plant could instead be predominant comparing utilities operational and economic results. Utility quality, in a word, can be used to summarize all the managerial and operational aspects that seem to be effective in determining plant performance. In this paper operational data of a consistent sample of commercial nuclear power stations, out of the total 433 operating NPPs, are analyzed, mainly focusing on the last decade operational experience. The sample consists of PWR and BWR technology, operated by utilities located in different countries, including U.S. (Japan)) (France)) (Germany)) and Finland. Multivariate regression is performed using Unit Capability Factor (UCF) as the dependent variable; this factor reflects indeed the effectiveness of plant programs and practices in maximizing the available electrical generation and consequently provides an overall indication of how well plants are operated and maintained. Aspects that may not be real causal factors but which can have a consistent impact on the UCF, as technology design, supplier, size and age, are included in the analysis as independent variables. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

GMLC Extreme Event Modeling -- Slow-Dynamics Models for Renewable Energy Resources

The need for slow dynamics models of renewable resources in cascade modeling essentially arises from the challenges associated with the increased use of solar and wind electric power. Indeed, the main challenge is that the power produced by wind and sunlight is not consistent; thus, renewable energy resources tend to have variable output power on many different timescales, including the timescales that a cascade unfolds.

14 SOLAR ENERGY↗

Detection of Low-energy Breaks in Gamma-Ray Burst Prompt Emission Spectra

The radiative process responsible for gamma-ray burst (GRB) prompt emission has not been identified yet. If dominated by fast-cooling synchrotron radiation, the part of the spectrum immediately below the νF{sub ν} peak energy should display a power-law behavior with slope α{sub 2}=−3/2, which breaks to a higher value α{sub 1}=−2/3 (i.e., to a harder spectral shape) at lower energies. Prompt emission spectral data (usually available down to ∼10--20 keV) are consistent with one single power-law behavior below the peak, with typical slope 〈α〉=−1, higher than (and then inconsistent with) the expected value α{sub 2}=−3/2. To better characterize the spectral shape at low energy, we analyzed 14 GRBs for which the Swift X-ray Telescope started observations during the prompt. When available, Fermi-GBM observations have been included in the analysis. For 67% of the spectra, models that usually give a satisfactory description of the prompt (e.g., the Band model) fail to reproduce the 0.5–1000 keV spectra: low-energy data outline the presence of a spectral break around a few keV. We then introduce an empirical fitting function that includes a low-energy power law α{sub 1}, a break energy E{sub break}, a second power law α{sub 2}, and a peak energy E{sub peak}. We find 〈α{sub 1}〉=−0.66 (σ=0.35), 〈log(E{sub break}/ keV)〉=0.63 (σ=0.20), 〈α{sub 2}〉=−1.46 (σ=0.31), and 〈log(E{sub peak}/ keV)〉=2.1 (σ=0.56). The values 〈α{sub 1}〉 and 〈α{sub 2}〉 are very close to expectations from synchrotron radiation. In this context, E{sub break} corresponds to the cooling break frequency. The relatively small ratio E{sub peak}/E{sub break}∼30 suggests a regime of moderately fast cooling, which might solve the long-lasting problem of the apparent inconsistency between measured and predicted low-energy spectral index.

79 ASTRONOMY AND ASTROPHYSICS↗

XMM-Newton and Chandra Observations of the Candidate Fermi-LAT Pulsar 4FGL J1015.5-6030

4FGL J1015.5-6030 is an unidentified Fermi-LAT source hosting a bright, extended X-ray source whose X-ray spectrum is consistent with that of a young pulsar, yet no pulsations have been found. Here we report on XMM-Newton timing and Chandra imaging observations of the X-ray counterpart of 4FGL J1015.5-6030. We find no significant periodicity from the source and place a 3σ upper limit on its pulsed fraction of 34%. The Chandra observations resolve the point source from the extended emission. We find that the point source's spectrum is well fit by a blackbody model, with temperature kT = 0.205 ± 0.009 keV, plus a weak power-law component, which is consistent with a thermally emitting neutron star with a magnetospheric component. The extended emission spans angular scales of a few arcseconds up to about 30'' from the point source and its spectrum is well fit by a power-law model with a photon index Γ = 1.70 ± 0.05. The extended emission's spectrum and 0.5–10 keV luminosity of 4 × 10 32 erg s −1 (at a plausible distance of 2 kpc) are consistent with that of a pulsar wind nebula. Based on a comparison to other GeV and X-ray pulsars, we find that this putative pulsar is likely a middle-aged (i.e., τ ∼ 0.1–1 Myr) radio-quiet pulsar with Ė~10 34 -10 35 erg s −1 .

Pulsars↗