Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Physical quantities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Nontrivial Fermi surface topology of the kagome superconductor CsV 3 Sb 5 probed by de Haas–van Alphen oscillations

Here, we have investigated the normal state Fermi-surface properties of the kagome superconductor CsV 3 Sb 5 using torque magnetometry with applied fields (H) up to 35 T. The torque signal shows clear de Haas-van Alphen (dHvA) oscillations above 15 T. The oscillations are smooth and consist of seven distinct frequencies with values from similar to ~18 T to 2135 T. The presence of higher frequencies in CsV 3 Sb 5 is further confirmed by carrying out additional measurements using the tunnel diode oscillator technique. All frequencies measured at different tilt angles (θ) of the field direction with respect to the c axis show a 1/cosθ dependence, implying that the Fermi surfaces corresponding to these frequencies are two dimensional (2D). The absence of dHvA oscillations at θ = 90° further supports the presence of 2D Fermi surfaces. The Berry phase (φ) determined from the Landau level fan diagram for all frequencies is similar to ~ 0.4. This value is close to the theoretical value of φ = 0.5 for a nontrivial system, which strongly supports the nontrivial topology of the Fermi surfaces of these frequencies. Several quantities characterizing the Fermi surface are calculated employing the Lifshitz-Kosevich theory. These findings are crucial for exploring the interplay between nontrivial band topology, charge-density wave, and unconventional superconductivity of CsV 3 Sb 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

The convergence of quadrupole rotational invariants from the nuclear shell model

Nuclei exhibit both single-particle and collective degrees of freedom, with the latter often subdivided into vibrational and rotational motions. Experimentally identifying the relative roles of these collective modes is extremely challenging, particularly in the face of possible shape coexistence. Model-independent, invariant quantities describing the deformation of a nucleus in the intrinsic frame have long been known but their determination potentially requires a large quantity of experimental data to achieve convergence. Through comparison with the nuclear shell model, the question of convergence is addressed. Shell-model calculations performed in the sd- and pf-shell model spaces are used to determine electric-quadrupole matrix elements for a multitude of low-lying states using the first 40 states of the relevant spins. Relative contributions to the rotationally invariant quantities from multiple states can therefore be determined. It is found that, on average, the inclusion of four intermediate states results in the leading-order invariant, $\langle\hat{Q^2}\rangle$, converging to within 10% of its true value and the triaxiality term, cos (3δ), converging to its true value, though some variance remains. Higher-order quantities relating to the softness of the nuclear shape are found to converge more slowly. The convergence of quadrupole rotationally invariant sum rules was quantified in the sd- and pf-shell model spaces and indicates the challenge inherent in a full determination of nuclear shape. The present study is limited to relatively small valence spaces. Finally, larger spaces, such as the rare-earth region, potentially offer faster convergence.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Information content of the differences in the charge radii of mirror nuclei

Differences in the charge radii of mirror nuclei have been recently suggested to contain information on the slope of the symmetry energy L. To test this hypothesis, we perform statistical correlation analysis using quantified energy density functionals that are consistent with our previous knowledge on global nuclear observables such as binding energies and charge radii. We conclude that the difference in charge radii between a mirror pair, $ΔR$$^{mir}_{ch}$, is an inferior isovector indicator compared to other observables, such at the neutron skin or electric dipole polarizability α D . In particular, this quantity correlates poorly with both the neutron skin and L. Here, we demonstrate that $ΔR$$^{mir}_{ch}$ is influenced by pairing correlations in the presence of low-lying proton continuum in the proton-rich mirror-partner nucleus. Considering the large theoretical uncertainties on $ΔR$$^{mir}_{ch}$, we conclude that the precise data on mirror charge radii cannot provide a stringent constraint on L.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Eavesdropping on the Decohering Environment: Quantum Darwinism, Amplification, and the Origin of Objective Classical Reality

“How much information about a system S can one extract from a fragment F of the environment E that decohered it?” is the central question of Quantum Darwinism. To date, most answers relied on the quantum mutual information of SF, or on the Holevo bound on the channel capacity of F to communicate the classical information encoded in S. Furthermore, these are reasonable upper bounds on what is really needed but much harder to calculate—the accessible information in the fragment F about S. We consider a model based on imperfect c-not gates where all the above can be computed, and discuss its implications for the emergence of objective classical reality. We find that all relevant quantities, such as the quantum mutual information as well as various bounds on the accessible information exhibit similar behavior. In the regime relevant for the emergence of objective classical reality this includes scaling independent of the quality of the imperfect c-not gates or the size of E, and even nearly independent of the initial state of S.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Integrability Breaking from Backscattering

Herein we analyze the onset of diffusive hydrodynamics in the one-dimensional hard-rod gas subject to stochastic backscattering. While this perturbation breaks integrability and leads to a crossover from ballistic to diffusive transport, it preserves infinitely many conserved quantities corresponding to even moments of the velocity distribution of the gas. In the limit of small noise, we derive the exact expressions for the diffusion and structure factor matrices, and show that they generically have off diagonal components. We find that the particle density structure factor is non-Gaussian and singular near the origin, with a return probability showing logarithmic deviations from diffusion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Experimental Modal Analysis Using Phase Quantities from Phase-Based Motion Processing and Motion Magnification

Phase-based motion processing and the associated Motion Magnification that it enables has become popular not only for the striking videos that it can produce of traditionally stiff structures visualized with very large deflections, but also for its ability to pull information out of the noise floor of images so that they can be processed with more traditional optical techniques such as digital image correlation or feature tracking. While the majority of papers in the literature have utilized the Phase-based Image Processing approach as a pre-processor for more quantitative analyses, the technique itself can be used directly to extract modal parameters from an image, noting that the extracted phases are proportional to displacements in the image. Therefore, once phases are extracted, they can be fit using traditional experimental modal analysis techniques. This produces a mode “shape” where the degrees of freedom are phases instead of physical motions. These phases can be scaled to produce on-image visualizations of the mode shapes, rather than operational shapes produced by bandpass filtering. Modal filtering techniques can also be used to visualize motions from an environment on an image using the modal phases as a basis for the expansion.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Simulant Development of Potential 200 West Area Waste Feeds

Preliminary planning for retrieval, qualification, and pretreatment of waste in Hanford’s 200 West Area (200W) has begun as part of the West Area Risk Management project. Experimental studies to technically mature pretreatment process operations will likely be needed because of the uniqueness of 200W waste. Pacific Northwest National Laboratory formulated five simulants to represent 200W-qualified feed based on the preliminary flowsheet provided by Washington River Protection Solutions, LLC. The simulant recipes were devised using applicable historical information as a reference point to support the use of the flowsheet waste vectors, which were combined into five distinct groups. These five groups formed the basis for the liquid composition targets that were adapted into recipes using charged-balanced salt species. The liquid phase recipes were batched in 1-L quantities and analyzed at Pacific Northwest National Laboratory. Once confirmed to be stable, the liquid solutions were tested for compatibility with candidate solid components. Specific solid components were recommended based on cross-examining the proposed solid phases in the flowsheet with relevant data from the literature. Mixtures of solid components were added to aliquots of the liquid batches and sub-sampled to measure particle size distribution. The measured distribution was compared to independently created benchmark distributions appropriate for each simulant. This process was iterated until a solid phase composition that resulted in a representative particle size distribution was found. After the final compositions were confirmed, a suite of chemical and physical characterization data was collected. This report describes the simulant basis, formulation methodology, laboratory measurements, and data collected for the recipes recommended to represent 200W waste feeds.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Development of 225 Ac Production from Low Isotopic Dilution 229 Th

The promise of 225 Ac targeted alpha therapies has been on the horizon for the last two decades. TerraPower Isotopes are uniquely suited to produce clinically relevant quantities of 225 Ac through the decay of 229 Th. Herein, a rapid processing scheme to isolate radionuclidic and radioisotopically pure 225 Ac in good yield (98%) produced from 229 Th that contains significant quantities of 228 Th activity is described. The characterization of each step of the process is presented along with the detailed characterization of the resulting 225 Ac isotopic starting material that will support the cancer research and development efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Restoring the discontinuous heat equation source using sparse boundary data and dynamic sensors

Abstract This study focuses on addressing the inverse source problem associated with the parabolic equation. We rely on sparse boundary flux data as our measurements, which are acquired from a restricted section of the boundary. While it has been established that utilizing sparse boundary flux data can enable source recovery, the presence of a limited number of observation sensors poses a challenge for accurately tracing the inverse quantity of interest. To overcome this limitation, we introduce a sampling algorithm grounded in Langevin dynamics that incorporates dynamic sensors to capture the flux information. Furthermore, we propose and discuss two distinct dynamic sensor migration strategies. Remarkably, our findings demonstrate that even with only two observation sensors at our disposal, it remains feasible to successfully reconstruct the high-dimensional unknown parameters.

Mathematics↗
DOE OSTI2022

Traditional Forensic Examinations on Bulk Special Nuclear Material

The Federal Bureau of Investigation (FBI) Laboratory at Quantico, Virginia is responsible for the forensic examination of radiological evidence and evidence contaminated with radioactive materials. Due to these unique hazards and the necessary specialized safety protocols, the FBI has developed a network of Partner Laboratories (PLs) across the United States of America to support conventional forensic examinations of radiological evidence and evidence contaminated with radioactive materials. In support of this, the FBI Laboratory has established the Hazardous Evidence Analysis Team (HEAT), a group of qualified forensic examiners, scientists, technicians, and photographers who can deploy to laboratories outside of the FBI Laboratory at Quantico, VA to perform conventional forensics on evidence containing/contaminated with hazardous materials. One of the FBI’s PLs, the United States Department of Energy’s Los Alamos National Laboratory (LANL), in Los Alamos, New Mexico, has unique facilities, personnel, and procedures to secure, safely handle, and process significant quantities of special nuclear material (SNM). While LANL’s procedures for working with SNM are well established, working with SNM under evidentiary controls is not. Close cooperation between LANL and FBI HEAT is required due to FBI policies on evidence handling, as well as the challenges associated with the exploitation and preservation of conventional forensics (fingerprints, trace evidence, and photography) on SNM evidence.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2024

High-Temperature Gas-Cooled Pebble-Bed Reactors Running In And Transient Modeling Capabilities Demonstration

This study presents a comprehensive benchmarking and verification effort of several thermal-hydraulic and multiphysics capabilities for high-temperature gas-cooled reactor (HTGR) applications. The first part of this effort focuses on the running-in verification of Griffin's multiphysics capabilities, specifically for simulating the evolution of Pebble Bed reactor cores from startup to equilibrium. In the absence of validation data, code-to-code comparisons are conducted with Kugelpy, showing good agreement for key quantities like maximum power density and fresh core k-eigenvalue predictions. However, discrepancies in equilibrium core predictions suggest potential issues with cross sections, underscoring the need for further refinement and evaluation. The HTTF system analysis code benchmark involves RELAP5-3D, SAM, and GAMMA+ to assess their predictive capabilities for HTTF behavior under both normal operation and pressurized conduction cooldown (PCC) transient conditions. While there is good agreement in predicting major parameters such as coolant temperature, solid temperature, and flow distribution, discrepancies in transient behavior highlight differences in modeling approaches, nodalizations, and heat transfer models. The HTTF lower plenum CFD benchmark employs nekRS to simulate flow mixing phenomena, successfully capturing relevant flow physics and demonstrating mesh independence in complex geometries. Preliminary results suggest a relatively uniform temperature field but significant unsteadiness in the flow, requiring time-averaging analyses. The GPBR200 system analysis code benchmark uses SAM's core channel and porous media models, incorporating an RCCS loop for decay heat removal. During steady-state and transient conditions, including protected de-pressurized and pressurized loss of forced cooling (DLOFC and PLOFC), both models show good agreement in predicting temperature profiles and key parameters. Notably, while the core channel model underpredicts convective heat transfer effects, both models maintain temperatures well below the TRISO fuel safety limit. These benchmarking efforts collectively enhance the predictive capabilities of the tools used in HTGR design and safety analysis, guiding developments to improve their accuracy and applicability.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Numerical Modeling of a Two-Stage Ocean Current Turbine

The Equinox Ocean Turbines (EQOT) current energy converter has a unique design with power generation in two small-diameter turbines attached to the tips of a large-diameter passive rotor. This configuration offers some key advantages for capturing ocean currents. With no centrally placed generator, almost no reaction torque is required at the nacelle of the main large-diameter rotor, and the small-diameter tip turbine generators operate at a higher speed and lower torque. The physics that determine the performance and loads on the turbine are also unique. The interactions of the flow field between the two stages and the general architecture of the system cannot be captured with traditional mid-fidelity modeling tools. For design iterations and large sets of load cases, it is important to have mid-fidelity models that can capture the important phenomenon with enough accuracy to identify global trends. This work uses a limited set of high-fidelity computational fluid dynamics (CFD) simulations to help inform the selection of and construction of a custom mid-fidelity model. Mid-fidelity modeling approaches were verified by comparing key turbine performance quantities to those found with the CFD model. Hydrodynamic interactions of the two-stage rotor were identified through high-fidelity CFD modeling. This highlighted the impact of the main rotor tip vortex and wake on the secondary rotor apparent inflow. This results in a relative flow rotation and sharp deficit, that change the optimal secondary rotor rotation speed and adds unsteadiness to the blade loading respectively. Multiple mid-fidelity approaches were evaluated for their ability to capture these effects. A simple approximation of the combined-stage performance based on single-stage BEM provides a reasonable rough prediction, especially near the peak TSR values, with some larger discrepancy at higher TSRs. Predicting the combined-stage performance based on single-stage CFD data improves this prediction across the TSR range. Although the combined-stage modeling in OLAF was not successful in this stage of the project, it showed promise as a mid-fidelity method, assuming the parameters can be tuned to account for the significant differences in time and length scales between the main and secondary rotors. This may be addressed through code changes in future work. A significant finding from the OLAF work was the agreement between the vortex core radius values found independently via a parameter space search and via CFD. The technique of using single-stage secondary rotor BEM, with a custom inflow taken from single-stage main rotor CFD or OLAF, provides an efficient method to capture one-way coupled flow interactions. This method provided generally good predictions of the impact of the flow rotation on the secondary rotor but struggled to accurately predict the peaks of the unsteady load progression. Future work could include some superposition of a tuned main rotor trailing edge viscous wake into the custom inflow to better predict this interaction.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Open giant magnons on LLM geometries

We compute sigma model solutions for rigidly rotating open strings suspended between giant gravitons in general LLM geometries. These solutions are confined to the LLM plane. These all have a dispersion relation for Δ - J that is consistent with saturation of a BPS bound of the centrally extended spin chain. For the special case of circularly symmetric LLM geometries, we can further evaluate the amount of angular momentum J carried by these strings. This quantity diverges for string configurations that try to move between different “coloring regions” in the LLM plane. All of these quantities have a perturbative expansion in the t’Hooft coupling. For the strings suspended between AdS giants, we can compute in field theory the leading result of J carried by the string via an analytic continuation of the SU(2) result, with the help of the Bethe Ansatz for the SL(2) sector. We thus provide additional information on how the radial direction of AdS arises from (open) spin chain calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Compilation and Evaluation of Beta-Delayed Neutron Emission Probabilities and Half-Lives for Z > 28 Precursors

We present a compilation and evaluation of experimental β-delayed neutron emission probabilities (P n ) and half-lives (T 1/2 ) for known or potential β-delayed neutron precursors with atomic number Z >28 ( 73 Cu – 233 Fr). This article includes the recommended values of both of these quantities, together with a compilation of experimental measurements when available. Some notable cases, as well as proposed standards forβ-delayed neutron measurements are also discussed. Evaluated data has also been compared to systematics using three different approaches.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

QCD Theory Meets Information Theory

We present a novel technique to incorporate precision calculations from quantum chromodynamics into fully differential particle-level Monte Carlo simulations. By minimizing an information-theoretic quantity subject to constraints, our reweighted Monte Carlo incorporates systematic uncertainties absent in individual Monte Carlo predictions, achieving consistency with the theory input in precision and its estimated systematic uncertainties. Our method can be applied to arbitrary observables known from precision calculations, including multiple observables simultaneously. It generates strictly positive weights, thus offering a clear path to statistically powerful and theoretically precise computations for current and future collider experiments. As a proof of concept, we apply our technique to event-shape observables at electron-positron colliders, leveraging existing precision calculations of thrust. Our analysis highlights the importance of logarithmic moments of event shapes, which have not been previously studied in the collider physics literature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Evolution of the cyclotron mass with doping in La 2–x Sr x CuO 4

The recent observation of cyclotron resonance in optimally doped La 2–x Sr x CuO 4 using time-domain THz spectroscopy in high magnetic field has given new possibilities for the study of cuprate superconductors. One can measure the cyclotron mass in the more disordered cuprates possessing short scattering times, therefore expanding the study to materials and dopings in which quantum oscillations have not been observed. In this paper we present the measurement of the carrier mass of the hole-doped cuprate La 2–x Sr x CuO 4 across a range of dopings spanning from the slightly underdoped (p=0.13) to highly overdoped (p=0.26), near the termination of the superconducting dome. These results reveal a systematic increase of m c with doping, up to values greater than 13 times the bare electron mass. This is in contrast with the masses extracted from the heat capacity, which show a peak near the pseudogap critical point p* and/or Lifshitz transition. The cyclotron frequency is linear in field up to 31 T for all dopings, giving no evidence for field-induced Fermi surface reconstructions. The cyclotron mass is found to be positive for all dopings, but with a magnitude systematically below the heat-capacity mass for under and optimally doped samples, while exceeding it for overdoped samples. Among other aspects, these results are surprising as photoemission reveals a Lifshitz transition in the middle of our doping range and the sign of the cyclotron mass determined from a finite-frequency resonance is, in conventional theories, a topological quantity only sensitive to whether or not the Fermi surface is closed around holes or electrons. We see no sign of a divergence of the mass near p* nor near the Lifshitz transition, showing that any singularity, if it exists, is not strong enough to affect the cyclotron mass.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Multifidelity Monte Carlo estimation for efficient uncertainty quantification in climate-related modeling

Abstract. Uncertainties in an output of interest that depends on the solution of a complex system (e.g., of partial differential equations with random inputs) are often, if not nearly ubiquitously, determined in practice using Monte Carlo (MC) estimation. While simple to implement, MC estimation fails to provide reliable information about statistical quantities (such as the expected value of the output of interest) in application settings such as climate modeling, for which obtaining a single realization of the output of interest is a costly endeavor. Specifically, the dilemma encountered is that many samples of the output of interest have to be collected in order to obtain an MC estimator that has sufficient accuracy – so many, in fact, that the available computational budget is not large enough to effect the number of samples needed. To circumvent this dilemma, we consider using multifidelity Monte Carlo (MFMC) estimation which leverages the use of less costly and less accurate surrogate models (such as coarser grids, reduced-order models, simplified physics, and/or interpolants) to achieve, for the same computational budget, higher accuracy compared to that obtained by an MC estimator – or, looking at it another way, an MFMC estimator obtains the same accuracy as the MC estimator at lower computational cost. The key to the efficacy of MFMC estimation is the fact that most of the required computational budget is loaded onto the less costly surrogate models so that very few samples are taken of the more expensive model of interest. We first provide a more detailed discussion about the need to consider an alternative to MC estimation for uncertainty quantification. Subsequently, we present a review, in an abstract setting, of the MFMC approach along with its application to three climate-related benchmark problems as a proof-of-concept exercise.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Sensitivity of an integrated experiment to uncertainty in the high explosive equations of state

Traditionally, hydrodynamics simulations are performed with a single equation-of-state (EOS) to describe each material. These EOSs typically have a physics-informed functional form with adjustable parameters that are calibrated in order to replicate small-scale data. However, because the calibration data have uncertainty and there are typically inherent degeneracies in fitting the EOS, there are actually multiple EOSs that might be consistent with calibration data. In this work, we perform uncertainty quantification (UQ) for the reactant and product equations of state for the high explosive PBX 9501 to yield an ensemble of EOSs that match the uncertain small-scale calibration data. We then simulate an experiment of an explosively formed penetrator repeatedly with different EOSs to both validate the UQ analysis and determine the effects of EOS uncertainty on the prediction of quantities of interest in the experiment. In general, we find good agreement between the simulation predictions and the experimental measurements, and we identify an EOS variable that contributes most directly to the spread in the predictions as the EOSs are varied.

36 MATERIALS SCIENCE↗