Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase change material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Evaluation of Phase Change Plaster/Paste Composites for Building Envelopes

Thermal energy storage (TES) materials increase a building’s thermal mass and provide the flexibility to shave and time-shift energy use. These materials are needed to enable grid-interactive efficient buildings, allowing building occupants to lower costs by leveraging free ambient heating/cooling as well as shifting consumption to cheaper electricity periods. Phase change materials (PCMs) that store heat through a solid-liquid/solid-solid transformation are of particular interest for TES because of their ability to store large amounts of energy across a constant temperature or very small temperature range. Furthermore, previous studies on PCM building envelopes evaluated products that may only be incorporated as part of new construction and are not easily applicable to existing, energy-intensive buildings. In this work, we leverage laboratory PCM characterization and whole-building energy simulation to study the energy and cost savings of PCM plaster/paste coatings, which can be applied post construction to both new builds and retrofits of existing buildings (about 40% of residential buildings in the United States fall into the retrofit category). We evaluated the energy impact of PCM plaster/paste composites for a single-family residential building in the United States, including layer design (location and thickness), composite properties (phase change temperature, energy density, and shape of the enthalpy curve), and U.S. climate zone. The enthalpy curve shape of PCM shows that phase change temperature and energy density are not the only two parameters that must be considered for PCM selection. Maximizing the energy density amid the effective TES zone is key to boosting energy savings. We also studied PCM price targets with the aim of achieving reasonable payback periods based on both block and time-of-use electricity rates. Moreover, we developed an empirical equation to provide a rough estimate of the energy savings potential of incorporating PCM without the need to perform detailed simulations. These results will help guide the selection and design of PCM plaster/paste composite elements for residential building envelopes.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION↗

Hybrid transfinite element modeling/analysis of nonlinear heat conduction problems involving phase change

The present paper describes the applicability of hybrid transfinite element modeling/analysis formulations for nonlinear heat conduction problems involving phase change. The methodology is based on application of transform approaches and classical Galerkin schemes with finite element formulations to maintain the modeling versatility and numerical features for computational analysis. In addition, in conjunction with the above, the effects due to latent heat are modeled using enthalpy formulations to enable a physically realistic approximation to be dealt computationally for materials exhibiting phase change within a narrow band of temperatures. Pertinent details of the approach and computational scheme adapted are described in technical detail. Numerical test cases of comparative nature are presented to demonstrate the applicability of the proposed formulations for numerical modeling/analysis of nonlinear heat conduction problems involving phase change.

Tamma, Kumar K.↗

Progress report on analytic and numerical studies of x-ray-induced impulse

In a variety of high-energy-density (HED) systems, x-rays of a given energy are used to generate shockwaves, bulk motion, and impulse in materials. As radiation energy is deposited within the material, the material is heated. The number of photons of a certain wavelength absorbed is determined by the spectral intensity of the radiation and the material’s opacity evaluated at that wavelength. This heating results in a pressure increase dictated by the material’s equation of state. Depending on the intensity of the absorbed radiation, it may also cause the material to change phase into a liquid, gas, or plasma. The increased pressure drives the heated surface layer to blow off, imparting impulse and sending a compressive wave into the bulk of the material. Additionally, the compression wave interacts with the solid boundary of the material, resulting in a tensile wave that may cause the material to spall. The impulse generated by the deposition of x-ray energy within the sample can be modeled using purely analytical methods, e.g. the Bethe, Bade, Averell, and Yost (BBAY) model. However, the blow-off process is rather complicated, and proper modeling efforts must account for material ejected by spallation, vaporization, jetting, and plasma ablation. For this reason, analytical models have an unclosed term describing the final energy of the blown-off material Ef(z). Prior modeling efforts have arbitrarily fixed this at some value or modeled it using a limiting set of thermodynamic assumptions. The work we are currently performing uses validated simulations using sophisticated photon transport, equation of state, and strength models/data to provide a fit for Ef(z) that is useful for predictive calculation of impulse. We will apply our methodology and show results for different materials and x-ray sources. This work is particularly useful for the design of experiments studying x-ray impulse generation. The present report is outlined as follows. Section 1.2 describes a series of HED experiments investigating x-ray-generated impulse in materials. Section 1.3 describes the computational approach we employ in this study, and presents validation results against the aforementioned experiments. Section 1.4 introduces analytical models for impulse generation, as well as our method for utilizing impulse from simulations to close the models. We discuss the concept of impulse-spectrum sensitivity, it’s application to uncertainty quantification, and derive a very useful analytical expression for it in 1.5. We then summarize recent progress in this project and discuss future work in section 1.6.

36 MATERIALS SCIENCE↗

The role of atomic vacancies on phonon confinement in α-GeTe

Atomic defects and their dynamics play a vital role in controlling the behavior of non-volatile phase change memory materials used in advanced optical storage devices. Synthesis and structural analysis by XRD and Raman spectroscopy on α-GeTe single crystal with different sizes are reported. The spectroscopic measurements on micron and nano sized α-GeTe single crystal reveal the evolution of phonon confinement with crystal sizes of few hundred nanometers. The characteristic vibrational modes of bulk α-GeTe structure are found to downshift and asymmetrically broaden to lower frequency with decreasing the single crystal size. We attribute the observed downshift of Raman lines in α-GeTe is largely due to the presence of high concentration of atomic vacancies. The crystal size and temperature dependent Raman spectra provide explicitly the dynamics of vacancies on optical phonon confinement in α-GeTe structure. Thus, the observed large concentration of vacancies and their size dependency might influence the phase change phenomenon in GeTe based alloys.

36 MATERIALS SCIENCE↗

cm 2 -Scale Synthesis of MoTe 2 Thin Films with Large Grains and Layer Control

Owing to the small energy differences between its polymorphs, MoTe 2 can access a full spectrum of electronic states from the 2H semiconducting state to the 1T' semimetallic state and from the T d Weyl semimetallic state to the superconducting state in the 1T' and T d phase at low temperature. Thus, it is a model system for phase transformation studies as well as quantum phenomena such as the quantum spin Hall effect and topological superconductivity. Careful studies of MoTe 2 and its potential applications require large-area MoTe 2 thin films with high crystallinity and thickness control. Here, we present cm 2 -scale synthesis of 2H-MoTe 2 thin films with layer control and large grains that span several microns. Layer control is achieved by controlling the initial thickness of the precursor MoO x thin films, which are deposited on sapphire substrates by atomic layer deposition and subsequently tellurized. Despite the van der Waals epitaxy, the precursor–substrate interface is found to critically determine the uniformity in thickness and grain size of the resulting MoTe 2 films: MoTe 2 grown on sapphire show uniform films while MoTe 2 grown on amorphous SiO 2 substrates form islands. Furthermore, this synthesis strategy decouples the layer control from the variabilities of growth conditions for robust growth results and is applicable to growing other transition-metal dichalcogenides with layer control.

2D materials↗

Hydrodynamic computations of high-power laser drives generating metal ejecta jets from surface grooves

Understanding dynamic fragmentation in shock-loaded metals and predicting properties of the resulting ejecta are of considerable importance for both basic and applied science. The nature of material ejection has been shown to change drastically when the free surface melts on compression or release. In this work, we present hydrodynamic simulations of laser-driven microjetting from micron-scale grooves on a tin surface. We study microjet formation across a range of shock strengths from drives that leave the target solid after release to drives that induce shock melting in the target. The shock-state particle velocity (Up) varies from 0.3 to 3 km/s and the shock breakout pressure is 3–120 GPa. The microjet tip velocity is 1–8 km/s and the free-surface velocity varies from 0.1 to 5 km/s. Two tin equations of state are examined: a “soft” model (LEOS 501) where the target melts for U p > 1 km/s and a more detailed multiphase model (SESAME 2161) that melts for U p > 1.4 km/s. We use these two models to examine the influence of phase change and the choice of the material model on microjet formation and evolution. We observe in our computational results that jet formation can be classified into three regimes: a low-energy regime where material strength affects jet formation, a moderate-energy regime dominated by the changing phase of tin material, and a high-energy regime where results are insensitive to the material model and jet formation is described by an idealized steady-jet theory. Using an ensemble of 2D simulations, we show that these trends hold across a wide range of drive energies and groove angles.

36 MATERIALS SCIENCE↗

Electric-field-induced paraelectric to ferroelectric phase transformation in prototypical polycrystalline BaTiO{sub 3}

An electric-field-induced paraelectric cubic to ferroelectric tetragonal phase transformation has been directly observed in prototypical polycrystalline BaTiO{sub 3} at temperatures above the Curie point (T{sub C}) using in situ high-energy synchrotron X-ray diffraction. The transformation persisted to a maximum temperature of 4 °C above T{sub C}. The nature of the observed field-induced transformation and the resulting development of domain texture within the induced phase were dependent on the proximity to the transition temperature, corresponding well to previous macroscopic measurements. The transition electric field increased with increasing temperature above T{sub C}, while the magnitude of the resultant tetragonal domain texture at the maximum electric field (4 kV mm{sup −1}) decreased at higher temperatures. These results provide insights into the phase transformation behavior of a prototypical ferroelectric and have important implications for the development of future large-strain phase-change actuator materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Refractive index modulation of Sb{sub 70}Te{sub 30} phase-change thin films by multiple femtosecond laser pulses

In this study, the controllable effective refractive index modulation of Sb{sub 70}Te{sub 30} phase-change thin films between amorphous and crystalline states was achieved experimentally by multiple femtosecond laser pulses. The modulation mechanism was analyzed comprehensively by a spectral ellipsometer measurement, surface morphology observation, and two-temperature model calculations. We numerically demonstrate the application of the optically modulated refractive index of the phase-change thin films in a precisely adjustable color display. These results may provide further insights into ultrafast phase-transition mechanics and are useful in the design of programmable photonic and opto-electrical devices based on phase-change memory materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystallization and Thermoelectric Transport in Semiconductor Micro- and Nanostructures Under Extreme Conditions

This project focused on thermoelectric transport in semiconductor micro and nanostructures where moderate and typical operating voltages and currents lead to extreme thermal gradients and current densities. Models that describe behavior of semiconducting materials typically assume an equilibrium condition or slight deviations from it. In these cases the generation-recombination processes are assumed to have reached a local equilibrium for a given temperature. Hence, free carrier concentrations and their mobilities, band-gap, thermal conductivity, thermoelectric properties, mobility of atoms and mechanical properties of the material, can be described as a function of temperature. In the case of PN junctions under electrical bias, carrier concentrations can change up to ~ 1020 cm-3 and a drift-diffusion approximation is typically used to obtain the carrier concentrations while assuming that the material properties do not change. In non-equilibrium conditions, the assumption that the material properties remain the same may not be valid. While the increased conduction-band electron concentration may not have a drastic effect on the material, large hole concentration is expected to soften the material as ‘a hole’ comes into existence as a broken bond in the lattice. As the hole density approaches 1022 cm-3, the number of bonds holding the lattice together is significantly reduced, making it easier to break additional bonds, reduce band-gap and inhibit phonon transport. As these holes move away from where they were generated, local properties are expected to deviate significantly from the equilibrium case. Hence, temperature alone is not sufficient to describe the behavior of the material. The behavior of the solid material close to a molten region (liquid-solid interfaces) is also expected to deviate from the equilibrium case as a function of hole injection rate, which can be drastically increased or decreased in the presence of an electric field. In the past years we have investigated the possible thermoelectric explanation of asymmetric melting of self-heated Si micro-structures using equilibrium materials’ properties that exist in the literature. We have analyzed the contribution of the electrons and the holes and identified the generation-transport-recombination of minority carriers (GTR) as the reason for an extreme change in the thermal profile in presence of strong generation and electric field. A more complete analysis required construction of models that capture the individual generation and recombination processes to understand the thermal profile as well as the possibility of electronic softening and non-equilibrium melting of the structure below melting temperature. The possibility of melting a material at a lower temperature breaks the correlation between the atomic mobility and the kinetic energy in the system for a given temperature and may allow alternative growth processes. This may also be the mechanism behind ‘amorphization-without-melting in layered structures heated with laser pulses’ that has been reported earlier. The conventional models for semiconductors are constructed for low temperature operation and their projections to higher temperatures do not yield reasonable carrier concentrations. Using these models, the free hole concentrations are calculated to be on the order of 1019 cm-3 at melting, which also do not correlate well with the latent heat of fusion. The melt is expected to correspond to broken bond concentrations on the order of the atomic density (~5x1022 cm-3 for Silicon). Hence, using conventional models the thermoelectric contribution expected from the GTR process is estimated to be much smaller than it likely is. Our work focused on improving the computational models and electrical characterization of materials and devices to better understand thermoelectric trabsport under extremen thermal gradients and current densities. Specifically, during this project, we have - Expanded our computational models to include self-consistent solution of Poisson charge equation (together with current and heat equations currently solved) for improved accuracy of role of bipolar conduction, - Developed a crystallization model incorporating experimentally determined nucleation rates and growth velocities to enable simulation of grain growth, growth-from-melt, filament formation and retention, - Performed high-temperature characterization of relevant materials (including metal contacts, interfacial and insulation layers); electrical and thermal conductivities, Seebeck coefficient, carrier mobility and concentration, - Performed High-speed device-level characterization of metastable amorphous and crystalline phases, crystallization and amorphization dynamics, melting and crystalline growth-from-melt, - Observed and characterized formation of microplasmas in electrically stressed ZnO nanoforests.

36 MATERIALS SCIENCE↗

Memory formation in matter

Memory formation in matter is a theme of broad intellectual relevance; it sits at the interdisciplinary crossroads of physics, biology, chemistry, and computer science. Memory connotes the ability to encode, access, and erase signatures of past history in the state of a system. Once the system has completely relaxed to thermal equilibrium, it is no longer able to recall aspects of its evolution. The memory of initial conditions or previous training protocols will be lost. Thus many forms of memory are intrinsically tied to far-from-equilibrium behavior and to transient response to a perturbation. This general behavior arises in diverse contexts in condensed-matter physics and materials, including phase change memory, shape memory, echoes, memory effects in glasses, return-point memory in disordered magnets, as well as related contexts in computer science. Yet, as opposed to the situation in biology, there is currently no common categorization and description of the memory behavior that appears to be prevalent throughout condensed-matter systems. Here the focus is on material memories. Here, the basic phenomenology of a few of the known behaviors that can be understood as constituting a memory will be described. The hope is that this will be a guide toward developing the unifying conceptual underpinnings for a broad understanding of memory effects that appear in materials.

36 MATERIALS SCIENCE↗

Nitrogen: A promising doping strategy for high-performance ovonic threshold switching selectors

The Ovonic Threshold Switching (OTS) selector serves as an essential component in the development of three-dimensional high-density memory integration technology. Nevertheless, the state-of-the-art high-performance OTS materials usually contain toxic elements such as arsenic (As), posing significant risks to both environmental and human health. Nitrogen (N), which belongs to the same group as arsenic (As), has emerged as a highly promising alternative for As doping. However, the underlying mechanisms that govern N-based OTS materials have not yet been extensively investigated. In this study, we delve into the effects of N doping on the structural, bonding, and electronic properties of amorphous GeSe (a-GeNSe) by ab initio molecular dynamics simulations to bridge the knowledge gap. Our findings indicate that upon N doping in a-GeSe, the formation of robust Ge-N bonds, along with N-centered tetrahedral and triangular structures, resulting in the sluggish atomic movement that enhances the thermal stability and endurance of a-GeNSe. The OTS characteristics are significantly influenced by the material’s electronic band structure, and thus the relatively slow performance drift can be attributed to the stabilization of mid-gap states, a result of N doping which effectively slows down the aging process of chalcogenide glass. Moreover, the increased mobility gap in a-GeNSe raises the threshold voltage (V th ), making it more compatible with commercially available phase-change memory materials. Furthermore, our findings reveal the extensive impact of the N element on a typical OTS material and offer valuable perspectives for alternative doping strategies that could potentially supplant As practices.

36 MATERIALS SCIENCE↗

On-the-fly closed-loop materials discovery via Bayesian active learning

Active learning—the field of machine learning (ML) dedicated to optimal experiment design—has played a part in science as far back as the 18th century when Laplace used it to guide his discovery of celestial mechanics. In this work, we focus a closed-loop, active learning-driven autonomous system on another major challenge, the discovery of advanced materials against the exceedingly complex synthesis-processes-structure-property landscape. We demonstrate an autonomous materials discovery methodology for functional inorganic compounds which allow scientists to fail smarter, learn faster, and spend less resources in their studies, while simultaneously improving trust in scientific results and machine learning tools. This robot science enables science-over-the-network, reducing the economic impact of scientists being physically separated from their labs. The real-time closed-loop, autonomous system for materials exploration and optimization (CAMEO) is implemented at the synchrotron beamline to accelerate the interconnected tasks of phase mapping and property optimization, with each cycle taking seconds to minutes. We also demonstrate an embodiment of human-machine interaction, where human-in-the-loop is called to play a contributing role within each cycle. This work has resulted in the discovery of a novel epitaxial nanocomposite phase-change memory material.

36 MATERIALS SCIENCE↗

Pressure dependence of band-gap and phase transitions in bulk CuX (X = Cl, Br, I)

Usually a phase transition, in theoretical studies, is explored or verified by studying the total energy as a function of the volume considering various plausible phases. The intersection point, if any, of the free energy vs. volume curves for the different phases is then the indicator of the phase transition(s). The question is, can the theoretical study of a single phase alone indicate a phase transition? i.e. can we look beyond the phase under consideration through such a study? Using density-functional theory, we report a novel approach to suggest phase transition(s) through theoretical study of a single phase. Copper halides have been engaged for this study. These are direct band-gap semiconductors, with zinc blende structure at ambient conditions, and are reported to exhibit many phase transitions. We show that the study of volume dependence of energy band-gap in a single phase facilitates looking beyond the phase under consideration. This, when translated to pressures, reflects the phase transition pressures for CuX (X = Cl, Br, I) with an encouraging accuracy. This work thus offers a simple, yet reliable, approach based on electronic structure calculations to investigate new semiconducting materials for phase changes under pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Persistent energy harvesting in the harsh desert environment using a thermal resonance device: Design, testing, and analysis

Thermal fluctuations in the environment are a ubiquitous, yet untapped energy source for harvesting. Our laboratory has introduced the concept of a thermal resonance device for this purpose, with potential to power wireless sensor networks (WSNs), devices embedded into structural elements, and electronics deployed in relatively inaccessible areas. This approach has particular advantages for the desert environment, where conventional energy harvesting devices are severely confounded by frequent sandstorms, extreme temperature and high solar fluence. Herein, we design, fabricate, and test a thermal resonator for the conversion of diurnal temperature fluctuations to electrical power in a harsh desert environment using a thermally conductive phase change composite as a high thermal effusivity material, specifically tuned to the temperature fluctuating environment of Thuwal, Saudi Arabia (22.3095°N, 39.1047°E). The composite consists of a highly porous and thermally conductive nickel foam impregnated with eicosane as a phase change material for enhanced thermal capacity. The high thermal effusivity material is incorporated into a rationally-designed thermal resonance device, which is tested for a period of two weeks in Saudi Arabia, extracting as high as 2 mW from approximately 10 °C diurnal temperature fluctuations. These experimental data provide a test of the theoretical model for the design and operation of the device. Overall, these results highlight the opportunity of employing thermal resonance devices for energy harvesting, particularly in the desert environment.

30 DIRECT ENERGY CONVERSION↗

Characterizing the Effects of Etch-induced Material Modification on the Crystallization Properties of Nitron Doped Ge2Sb2Te5

The chemical and structural effects of processing on the crystallization of nitrogen doped Ge{sub 2}Sb{sub 2}Te{sub 5} is examined via x-ray photoelectron spectroscopy (XPS), x-ray absorption spectroscopy (XAS), time resolved laser reflectivity, and time resolved x-ray diffraction (XRD). Time resolved laser reflectivity and XRD show that exposure to various etch and ash chemistries significantly reduces the crystallization speed while the transition temperature from the rocksalt to the hexagonal phase is increased. XPS and XAS attribute this to the selective removal and oxidization of N, Ge, Sb, and Te, thus altering the local bonding environment to the detriment of device performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗