Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POLYMERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Corrosion protection of steel pipelines with metal-polymer composite barrier liners

Pipelines are efficient in transporting natural gas over large distances. Wet carbon dioxide present in pipelines can create an environment that is corrosive to steel. Polymer liners made from either polyethylene or polyamide (nylon) are presently used to mitigate internal corrosion in natural gas pipelines. Gas diffuses through all polymers over time, and polymer-only liners lower the steel corrosion rate by reducing the reactive gas flux to the internal surface of a pipeline. Composite liners, which incorporate one or more metallic layers that are impermeable to corrosive gases, offer better protection than polymer-only liners. In this study, we measured the methane, water vapor, and carbon dioxide permeability of a multi-layer barrier film and found it to be more effective in resisting gas permeation than polyethylene and nylon-11 films.

03 NATURAL GAS↗
DOE OSTI2021

High performance polymers for oil and gas applications

Proper material selection has been one of the most important aspects in the design of chemical process equipment. In particular, the oil and gas industry has transitioned from using metals to non-metals (e.g. advanced and high performance polymeric materials) in most of their structural components, coatings, equipment parts, and the like. It is therefore imperative to understand the advantages and limitations of these polymer materials before they can be effectively used for a specific application. This review article aims to provide an overview of the properties, applications, and durability against reactivity and degradation of high performance polymers commonly used in the oil and gas industry. These include polysulfone, polyetherimide, polyphenylene sulfide, polyetheretherketone, fluoropolymers, and other high performance thermosets, elastomers, and polymer nanocomposites. Further, this article covers the current research efforts in improving the properties of high performance polymers and expanding their applications (including 3D printing or additive manufacturing) in the oil and gas industry.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tuning the Mobility of Indacenodithiophene-Based Conjugated Polymers via Coplanar Backbone Engineering

Conjugated polymers based on indacenodithiophene-benzothiadiazole (IDT-BT) have attracted great interest due to their high charge carrier mobilities while being low crystallinity (i.e. near-amorphous.) They represent a promising design strategy to achieve both excellent stretchability and electrical performance. Here, we describe an approach on structural modifications of IDT-BT, namely by introducing non-covalent interactions and substituting building blocks to promote extended coplanar backbones. We systematically investigated the effects of structural modifications on backbone conformation, polymer aggregations, and charge carrier mobilities. Among the investigated polymers, the fluorinated derivative IDT-FBT demonstrated the highest charge carrier mobility of 5.19 cm 2 /Vs, along with low activation energy and Urbach energy indicating its low energy disorder level. The high mobility was attributed to the higher backbone planarity reinforced by S···F and H···F non-covalent interactions and improved interchain interactions through strong aggregation. In conclusion, our findings indicate that increasing backbone coplanarity may further improve mobility in low crystallinity conjugated polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Rational Design of Novel Biomimetic Sequence-Defined Polymers for Mineralization Applications

Silica biomineralization is a naturally occurring process, wherein organisms use proteins and other biological structures to direct the formation of complex, hierarchical nanostructures. Discovery and characterization of such proteins and their underlying mechanisms spurred significant efforts to identify routes for biomimetic mineralization that reproduce the exquisite shapes and size selectivities found in nature. A common strategy has been the use of short peptide sequences with chemistry mimicking those found in natural systems, such as the use of the silaffin-derived R5 peptide. While progress has been made using this approach, there are many limitations that have prevented breakthroughs in biomimicry. To advance our ability to use charged macromolecules for silica formation, we propose to use sequence-defined synthetic polymers known as peptoids, or N-substituted polyglycines, which present significant capability for the precise tuning of sequence and structure beyond what can often be achieved with peptides alone. This study presents a computationally predicted design of these polymers that leads to the controlled formation of silica nanomaterials. We investigate surface adsorption and the mineralization process through analysis of binding mechanisms and energetics of the R5 system. Next, we synthesized two R5-inspired peptoids and validated our prediction in the design of mineralization polymers through characterization using surface plasmon resonance and electron microscopy. Here, this computationally guided study holds great promise for designing new sequences with unprecedented control of the placement of chemical functional groups, thus allowing for further unraveling of silicification mechanisms and the eventual design of sequence-defined synthetic polymers leading to the predictive synthesis of nanostructured functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tailoring the Interfacial Interactions of Porous Polymer Membranes to Accelerate Atomic Layer Deposition: The Latent Path to Antifouling Membranes

Atomic layer deposition (ALD) is a powerful strategy to engineer hybrid organic-inorganic membranes with emergent functionalities. The combination of atomic-level thickness control, a wide materials palette, and unprecedented conformality allows the physiochemical properties (e.g., hydrophilicity) of mesoporous polymer membranes to be precisely tuned. The nucleation of ALD material growth on polymer surfaces relies on Lewis acid-base interactions and remains an overlooked motif with tremendous potential to accelerate ALD nucleation and growth. Strategies to enhance these interactions could enable desirable properties such as antifouling behavior to be imparted on inert polymer surfaces that lack the necessary functional groups for ALD nucleation. Here, in this study, we demonstrate that the reactivity of polyacrylonitrile (PAN) membranes toward ALD metal oxide (MO) precursors with Lewis acid characteristics is enhanced by introducing strong Lewis base functional groups (amidoxime: Am) on the PAN backbone (Am-PAN). The resulting Lewis acid-base interactions accelerate the MO nucleation in Am-PAN and reduce the number of deposition cycles required to achieve hydrophilicity compared with the untreated PAN membrane. Unveiling the reaction mechanism, in situ Fourier transform infrared (FTIR) spectroscopy measurements established enhanced interaction dynamics between the ALD MO precursors and the Am-PAN membrane, unlike the PAN membrane. Spectroscopic ellipsometry and thermogravimetric analysis measurements revealed higher MO loadings in Am-PAN membranes compared to PAN membranes for the same number of ALD cycles. We found that strong Lewis acid-base interactions accelerated the ALD for a range of materials including Al 2 O 3 , TiO 2 , SnO 2 , and ZnO. More broadly, our work demonstrates that tailoring metal-precursor-polymer interactions is a powerful strategy to accelerate and modulate the ALD. We used this design strategy to fabricate Al 2 O 3 -Am-PAN hybrid membranes that showed 2-fold higher antifouling capability compared to pristine PAN membranes prepared with an equivalent number of Al 2 O 3 ALD cycles. Our approach expands the scope of design options for fouling-resistant porous hybrid inorganic-organic membranes and may ultimately reduce the operational costs of water treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2021

First-Principles Study on the Electronic Properties of PDPP-Based Conjugated Polymer via Density Functional Theory

In this study, we focus on computational predictions of the electronic and optical properties of a one-dimensional periodic model of a single chain of a diketopyrrolopyrrole (DPP)-based conjugated polymer (PDPP3T) as a function of electronic configuration changes due to charge injection. Here, we employ density functional theory (DFT) to explore the ground-state and excited-state electronic properties as well as optical properties influenced by charge injection. We utilize both the Heyd–Scuseria–Ernzerhof (HSE06) and Perdew–Burke–Ernzerhof (PBE) functionals to predict the band gap and compute the absorption spectrum. Our DFT results point out that utilizing the HSE06 functional in conjunction with momentum sampling over the Brillouin zone can appropriately predict the band gap and absorption spectrum in good agreement with experimental data. Moreover, we explore the influence of charge-carrier injection on the electronic configuration of the PDPP3T polymer. Our results indicate that the injection of charge carriers into the PDPP3T semiconducting polymer model greatly affects the electrical properties and ends in a low band gap and high mobility of charge carriers in PDPP3T polymers, offering the potential to tailor the material electronic performance for organic photovoltaic and optoelectronic device applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Deuteration and Polymers: Rich History with Great Potential

Deuterium, a stable hydrogen isotope, has been playing important roles in many scientific areas, including polymer science. The developments of deuteration science and polymer science have been interwoven for the past 60 years. The unique characteristics of the scattering lengths for hydrogen isotopes (protium and deuterium) result in the dramatic differences of scattering length densities for protiated and deuterated compounds omnipresent in polymers, rendering neutron scattering a powerful tool for the investigation of polymeric structures and dynamics that are inaccessible to other tools. While the role of deuteration in neutron scattering of polymeric materials can hardly be overstated, it has also enabled the addressing of many questions using other approaches, such as NMR and vibrational spectra. In this Perspective, we provide a brief account of deuterium in the synthesis, properties, and application of various polymers. We also offer an outlook of the potentials in this ever-evolving and exciting area.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Internal Microstructure Dictates Interactions of Polymer-grafted Nanoparticles in Solution

Understanding the effects of polymer brush architecture on particle interactions in solution is requisite to enable the development of functional materials based on self-assembled polymer-grafted nanoparticles (GNPs). Static and dynamic light scattering of polystyrene-grafted silica particle solutions in toluene reveals that the pair interaction potential, inferred from the second virial coefficient, A 2 , is strongly affected by the grafting density, σ, and degree of polymerization, N, of tethered chains. In the limit of intermediate σ (~0.3 to 0.6 nm -2 ) and high N, A 2 is positive and increases with N. This confirms the good solvent conditions and can be qualitatively rationalized on the basis of a pair interaction potential derived for grafted (brush) particles. In contrast, for high σ > 0.6 nm -2 and low N, A 2 displays an unexpected reversal to negative values, thus indicating poor solvent conditions. These findings are rationalized by means of a simple analysis based on a coarse-grained brush potential, which balances the attractive core-core interactions and the excluded volume interactions imparted by the polymer grafts. The results suggest that the steric crowding of polymer ligands in dense GNP systems may fundamentally alter the interactions between brush particles in solution and highlight the crucial role of architecture (internal microstructure) on the behavior of hybrid materials. The effect of grafting density also illustrates the opportunity to tailor the physical properties of hybrid materials by altering geometry (or architecture) rather than a variation of the chemical composition.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Percolating Interfacial Layers Enhance Conductivity in Polymer–Composite Electrolytes

Here, this study investigates the impact of the ceramic particle size on the bulk and interfacial ion transport properties of composite polymer electrolytes. The ceramic particles used for this study are micrometer-sized commercial lithium lanthanum titanate (LLTO) powders and LLTO nanorods (NR) prepared in the laboratory. The polymer matrices are vinylene carbonate (VEC) based single-ion-conducting (SIC) and dual-ion-conducting (DIC) polymer electrolytes. Our results reveal that the addition of LLTO NR results in improved ion transport, while the addition of commercial LLTO is ineffective or even detrimental. We ascribe these results to the formation of an interfacial polymer layer around the LLTO particles with enhanced Li + mobility and estimate the thickness of the interfacial layer to be ∼5 nm. The high surface-to-volume ratio of the LLTO NR leads to the percolation of the interfacial region at a relatively low ceramic loading of 30 wt %. This study highlights the importance of achieving percolation of the interface region (as opposed to the particles themselves) within the composite electrolyte when the interfacial layer is the enhancement mechanism.

Ock, Ji-young↗
DOE OSTI2025

Resonant Tender X-ray Scattering for Disclosing the Backbone Conformation of Conjugated Polymers

The backbone conformation of conjugated polymers (CPs) is essential to their performance in electronic applications. Contrast-variation small-angle neutron scattering (CV-SANS) techniques were used to assess the CP’s backbone conformation, which relies on synthesis of deuterated polymers. Such a technique has been proven mature and effective. One drawback is that deuteration labeling might subtly alter polymer’s physical properties due to structural modifications. To address these challenges, we introduce a novel approach utilizing tender Xray scattering near the sulfur K-edge to distinctly evaluate the backbone versus whole chain conformation for a low-bandgap donor−acceptor CP, poly[(5,6-difluoro- 2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3‴-dialkyl-2,2′;5′,2″;5″,2‴-quaterthiophen-5,5‴- diyl)] (PffBT4T). For PffBT4T dissolved in trimethylbenzene (TMB), the sulfur K-edge is identified at approximately 2477 eV using near-edge X-ray absorption fine structure spectroscopy (NEXAFS). Tender X-ray scattering conducted at presulfur K-edge and on-sulfur K-edge at elevated temperatures facilitated the distinction between the backbone and whole chain conformations. The results demonstrate that for highly flexible polymer, the backbone’s persistence length could be lower than that of the whole chains, suggesting a more flexible backbone. This rapid, label-free method enhances our ability to characterize CP’s backbone conformation efficiently, offering significant implications for the design and optimization of CPs for advanced electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Increasing Volume in Conjugated Polymers to Facilitate Electrical Doping with Phosphomolybdic Acid

Molecular p-type electrical dopants have been proven useful to fine-tune the optoelectronic properties of bulk organic semiconductors and their interfaces. In this work, the volume in polymer films and its role in solution-based electrical p-type doping using phosphomolybdic acid (PMA) are studied. The polymer film volume was controlled using two approaches. One is based on heating both the PMA solution and the film prior to immersion. The second is based on coating the polymer film with a liquid blend that contains the PMA solution and a swelling solvent. 31 P NMR and FTIR experiments indicate that the Keggin structure appears to be preserved throughout the doping process. Results show that increasing the polymer volume facilitates the infiltration of the PMA Keggin structure, which results in an increased electrical p-type doping level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Facile Strategy to Prepare Poly(ionic liquid)-Coated Solid Polymer Electrolytes through Layer-by-Layer Assembly

The inability of solid polymer electrolytes to preserve strong mechanical strength with high ionic conductivity hinders the commercialization of lithium metal batteries (LMBs). The success of fabricating layer-by-layer (LbL)-assembled electrolytes has realized the application of flexible solid polymer electrolytes in electrochemical devices. Here, we demonstrate a rational strategy to construct solid electrolytes coated with multiple ultrathin layers of polyanions (poly(sodium 4-styrenesulfonate)) and polycations (linear poly(1-butyl-3-(4-vinylbenzyl)-1H-imidazolium chloride) (BVIC)/linear poly(PEG 4 -VIC)/SiO 2 -g-poly(PEG 4 -VIC)) using an LbL assembly method. Poly(ionic liquid) backbones and PEG side groups are employed to facilitate the transport of lithium ions via the segmental motion of the macromolecular matrix. The fabricated free-standing membranes exhibited good ionic conductivities of 9.03–10 × 10 –4 S cm –1 . Furthermore, a Li/LiFePO 4 cell assembled with the LbL-membrane electrolytes exhibits an initial high discharge capacity of 143–158 mAhg –1 at 60 °C with high columbic efficiency. In conclusion, this approach, which combines polymer synthesis and LbL self-assembly, is an effective and facile route to fabricate solid polymer electrolyte membranes with superior ionic conductivity and mechanical robustness, which are useful for electrochemical devices and high-voltage battery applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Investigating Fast Scanning Calorimetry and Differential Scanning Calorimetry as Screening Tools for Thermoset Polymer Material Compatibility with Laser-Based Powder Bed Fusion

As additive manufacturing (AM) technology has developed and progressed, a constant topic of research in the area is expanding the library of materials to be used with these techniques. Among AM methods that utilize polymers, laser-based powder bed fusion (PBF-LB) has preferentially used thermoplastic polymers as its starting materials, but the deposition and material joining method employed in PBF-LB may also be compatible with powdered thermoset polymer precursors as feedstocks. To assess the compatibility of candidate thermosetting polymers and PBF-LB, characterization techniques and protocols that link fundamental material behavior to material behavior in the processing environment are needed. Therefore, the objectives of this work are to compare the curing behavior measured with two different calorimetry techniques that can operate in different heating rate regimes, differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC), and to assess the capabilities of these techniques to act as materials screening tools for PBF-LB. A commercial polyester powder coating is used as a model material to evaluate the potential of obtaining complimentary information for material screening through a combination of calorimetry methods, and its non-isothermal curing behavior is measured at heating rates between 5 °C/min and 7500 °C/min. Curing exotherms are observed with both calorimetry techniques, and comparing the enthalpy associated with curing shows that incomplete curing occurs at higher heating rates, with relative conversion values of approximately 30%. The curing data are fit with two isoconversional models, Friedman and Starink, which show a reduced activation energy at higher heating rates as well, signifying a lower barrier to curing at the conditions used in the FSC experiments. Overall, the results of this work indicate that using these two calorimetry techniques as tiered screening tools can provide valuable information about how curing may proceed in PBF-LB and inform materials selection and design activities for additive manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Processing Effects on the Self-Assembly of Brush Block Polymer Photonic Crystals

Here,the self-assembly of poly(dimethylsiloxane)-b-poly(trimethylene carbonate) (PDMS-b-PTMC) bottlebrush block polymers was investigated under different processing conditions. Small-angle X-ray scattering (SAXS) and UV/Visible spectroscopy provided insight into the self-assembly and structure in response to heating and applied pressure. In the absence of applied pressure (i.e., before annealing), the PDMS-b-PTMC bottlebrush block polymers are white solids and adopt small, randomly oriented lamellar grains. Heating the materials to 140 °C in the absence of applied pressure appears to “lock in” the isotropic, short-range-ordered state, preventing the formation of the long-range-ordered lamellar structure responsible for photonic properties. Applying modest anisotropic pressure (3 psi) between parallel plates at ambient temperature orients the short-range lamellar grains; however, applied pressure alone does not produce long-range order. Only when the bottlebrush block polymers were heated (>100 °C) under modest pressure (3 psi) were long-range-ordered photonic crystals formed. Analysis of the SAXS data motivated analogies to liquid crystals and revealed the potential self-assembly pathway. These results provide insight into the structure and self-assembly of bottlebrush block polymers with low glass transition temperature side chains in response to different processing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Self-Assembly of Repetitive Segment and Random Segment Polymer Architectures

Recent advances in chemical synthesis have created new methodologies for synthesizing sequence-controlled synthetic polymers, but rational design of monomer sequence for desired properties remains challenging. In this work, we synthesize periodic polymers with repetitive segments using a sequence-controlled ring-opening metathesis polymerization (ROMP) method, which draws inspiration from proteins containing repetitive sequence motifs. The repetitive segment architecture is shown to dramatically affect the self-assembly behavior of these materials. In this work, our results show that polymers with identical repetitive sequences assemble into uniform spherical nanoparticles after thermal annealing, whereas copolymers with random placement of segments with different sequences exhibit disordered assemblies without a well-defined morphology. Overall, these results bring a new understanding to the role of periodic repetitive sequences in polymer assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Conductive Organometallic Polymers from Soluble Superatom Ions

Superatomic crystals comprising ligand-capped, metal chalcogenide clusters and fullerenes are modular materials that exhibit enhanced electronic, magnetic, and thermal conductivity properties. We find that neutral, M 4 S 4 (M = Fe, Co) clusters stabilized with N -heterocyclic carbenes (NHCs) can transfer charge to C 60 fullerene to form binary superatomic crystals. Notably, these compounds are soluble in various organic solvents, allowing their properties to be investigated in solution, unlike traditional fullerene-based superatomic crystals. The ion pairs can be further assembled into organometallic polymers using Janus-bis(NHCs) to cross-link the oxidized M 4 S 4 units. We show that the superatomic polymers are more conductive than both the precursor superatomic crystals and the polymers containing only neutral M 4 S 4 clusters. Similar conductivity values can be obtained when neutral M 4 S 4 –NHC polymers are doped with solutions of C 60 fullerene. These findings demonstrate that next generation superatomic materials can be prepared via the combination of charge transfer and polymerization with appropriate cross-linking agents.

carbon nanomaterials↗
DOE OSTI2020

P-Type Electrochemical Doping Can Occur by Cation Expulsion in a High Performing Polymer for Organic Electrochemical Transistors

We investigate the mechanism of ion-dependent charge compensation during electrochemical oxidation (doping) of the model mixed ionic/electronic transporting polythiophene derivative poly(3-{[2-(2-methoxyethoxy)ethoxy]methyl}thiophene-2,5-diyl) (P3MEEMT). Using a combination of electrochemical quartz microbalance gravimetry and glow discharge optical emission spectroscopy, we show that charge compensation during polymer redox processes proceeds via a cation-dependent mechanism. For p-type polymer oxidation in certain electrolytes, charge compensation is achieved by both eventual injection of anions into the film, as well as initial expulsion of cations from the film. We compare doping mechanisms for a variety of electrolyte salts including potassium chloride, tetrabutylammonium chloride, potassium hexafluorophosphate (KPF6), and tetrabutylammonium hexafluorophosphate. For the electrolyte KPF6, both the cations and anions coexist in the water-swelled polymer even prior to application of electrical bias. Our data indicate that electrochemical doping (hole injection into the polymer and ionic charge compensation) proceeds via the following mechanism: (1) hydration of the neutral film by electrolyte (water, cations, anions), (2) cation (K+) expulsion from the film upon initial application of an oxidative bias, and (3) anion injection into the film at higher oxidation/doping levels (>~2 × 1020/cm3). Understanding the mechanism of charge compensation during the doping process should allow for the design of improved mixed ionic/electronic conductors for use in applications ranging from organic supercapacitors and redox flow batteries to bioelectronic sensors, thermoelectrics, and devices for neuromorphic computing.

Flagg, Lucas Q.↗
DOE OSTI2021

Spontaneous Reorganization of DNA-Based Polymers in Higher Ordered Structures Fueled by RNA

We demonstrate a strategy that allows for the spontaneous reconfiguration of self-assembled DNA polymers exploiting RNA as chemical fuel. To do this, we have rationally designed orthogonally addressable DNA building blocks that can be transiently deactivated by RNA fuels and subtracted temporarily from participation in the self-assembly process. Through a fine modulation of the rate at which the building blocks are reactivated we can carefully control the final composition of the polymer and convert a disordered polymer in a higher order polymer, which is disfavored from a thermodynamic point of view. We measure the dynamic reconfiguration via fluorescent signals and confocal microscopy, and we derive a kinetic model that captures the experimental results. Our approach suggests a novel route toward the development of biomolecular materials in which engineered chemical reactions support the autonomous spatial reorganization of multiple components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗