Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE STUDIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Composition of the metal phases in ordinary chondrites - Implications regarding classification and metamorphism

The paper examines the composition of metal phases and metamorphism in ordinary chondrites. It is shown that below 550 C increasing Co decreases the equilibrium kamacite Ni concentration of an alpha to gamma system, and that the equilibrated L chondrites have kamacite and taenite Co concentrations in the L-group range. Metal-phase studies of petrologic type-3 ordinary chondrites with highly unequilibrated silicates showed a wide range in the degree of matrix kamacite equilibration; in the three most unequilibrated chondrites most taenite is clear, and the high Ni content shows that metamorphic temperatures were lower than 400 C in these meteorites.

Afiattalab, F.↗

Schlieren with a laser diode source

The use of a laser diode as a light source for a schlieren system designed to study phase objects such as a wind-tunnel flow is explored. A laser diode schlieren photograph and a white light schlieren photograph (zirconium arc source) are presented for comparison. The laser diode has increased sensitivity, compared with light schlieren, without appreciable image degradiation, and is an acceptable source for schlieren flow visualization.

Burner, A. W.↗

Aerothermodynamic entry environment of the Space Shuttle Orbiter

The entry aerothermodynamic environment for the Space Shuttle vehicle was an important factor in the design of the Orbiter. A design goal established during the initial study phase of the Shuttle program was to minimize the thermal protection system's weight. A description is presented of the design approach and preliminary flight test results relative to the entry heating environment for the complex flowfield regions of the Space Shuttle Orbiter. Attention is given to Orbiter aerothermodynamic design features, aspects of trajectory development, the wind tunnel test program, heating environments, boundary-layer transition problems, and the flight test program.

Lee, D. B.↗

Early solar system aqueous activity - Sr isotope evidence from the Orgueil CI meteorite

The Sr isotopic composition and Rb-87/Sr-86 ratio have been measured in carbonates and sulfate separated from the Orgueil meteorite in order to determine the time when liquid water may have acted on the parent body. Both of the studied phases probably precipitated from aqueous solution. The results show that carbonate deposition occurred contemporaneously with parent body formation or shortly after it, probably within 100 Myr. On the other hand, at least some of the calcium sulfate seems to have been formed recently.

Macdougall, J. D.↗

Electrostatic wave observation during a space simulation beam-plasma discharge

ELF waves which were observed during beam-plasma discharge in the large vacuum chamber at Johnson Space Center are studied. Phase delays as a function of radius (obtained from cross-correlation measurements of density fluctuations) along with measurements of frequency and plasma potential, density, and temperature have been compared to a zero-order slab model of nonlocal azimuthal drift wave propagation. The inferred wave phase velocity in the plasma frame after Doppler correction is found to be near one half the electron diamagnetic drift velocity. Although the measurements presented do not uniquely define a propagation mode, a model of azimuthal drift wave propagation is found to be consistent with observations.

Walker, D. N.↗

Poorly graphitized carbon as a new cosmothermometer for primitive extraterrestrial materials

A description is presented for the most common carbon phase in carbon-rich chondritic porous (CP) aggregate collected from the stratosphere by NASA researchers as part of the Cosmic Dust Program. An extraterrestrial origin was confirmed for the samples by microscopic examinations. The sample grains contained 45 percent carbon-rich phases and 30 percent low-temperature phases. Studies of the d002 interlayer spacing of the carbon clumps indicated that graphitization occurred at metamorphic temperatures after solar nebular condensation, yet early in solar system formation. Graphitized terrestrial materials served as a useful reference against which the CP materials were compared.

Rietmeijer, F. J. M.↗

Analysis of 16 plasma vortex events in the geomagnetic tail

The analysis of 16 plasma vortex occurrences in the magnetotail plasma sheet of Hones et al. (1983) is extended. Two- and three-dimensional plasma measurements and three-dimensional magnetic field measurements were used to study phase relations, energy propagation, and polarization properties. The results point toward an interpretation as a slow strongly damped MHD eigenmode which is generated by tailward traveling perturbations at the low-latitude interface between plasma sheet and magnetosheath.

Birn, J.↗

Neutron and X-ray diffraction of plasma-sprayed zirconia-yttria thermal barrier coatings

ZrO2-7.8mol. pct. YO1.5, a fused powder, and ZrO2-8.7mol. pct. YO1.5, a prereacted powder, were plasma-sprayed onto steel substrates. Neutron diffraction and X-ray diffraction of the as-received powder, the powder plasma sprayed into water, as-sprayed coatings, and coatings heat-treated for 10 and 100 h were carried out to study phase transformations and ordering of the oxygen ions on the oxygen sublattice. The as-received fused powder has a much lower monoclinic percentage than does the pre-reacted powder, this resulting in a much lower monoclinic percentage in the coating. Heat treatment increases the percentages of the cubic and monoclinic phases, while decreasing the tetragonal content. An ordered tetragonal phase is detected by the presence of extra neutron diffraction peaks. These phase transformations and ordering will result in volume changes. The implications of these transformations on the performance of partially stabilized zirconia thermal barrier coatings is discussed.

Shankar, N. R.↗

Orbital transfer vehicle concept definition and system analysis study. Volume 1A: Executive summary. Phase 2

The objectives of the Phase 2 study were to improve the orbit transfer vehicle (OTV) concept definition by focusing on the following issues: the impact of mission requirements on OTV system design; OTV basing concepts on the Space Shuttle, separate platforms, and/or remote locations; cost reduction of an OTV program to improve its economic benefits and support its acquisition. The OTV mission scenario includes a wide range of missions the main drivers of which are manned GEO servicing, mid-inclination/polar DOD, and lunar/planetary projects. A mission model is presented which includes the type and number of missions per year and the estimated propellant requirements. To accomplish the missions, many OTV concepts were defined including ground-based OTVs launched either in the STS orbiter, the aft cargo carrier, or a heavy lift launch vehicle, and a space-based OTV. System and program trade studies were conducted using performance, cost, safety/risk, and operations/growth criteria. The study shows that mission requirements and substantial economic benefits justify a reusable, cryogenic (H2/O2) space-based OTV. Such a system would not be subjected to Earth-to-orbit launch loads and would not be constained in size or weight. Safety is enhanced by the fact that the system components are launched unfueled. Its inherent reusability and ability to be refueled in space make the space-based OTV very economical to operate.

Ketchum, W. J.↗

Laser techniques in high-pressure geophysics

Laser techniques in conjunction with the diamond-anvil cell can be used to study high-pressure properties of materials important to a wide range of problems in earth and planetary science. Spontaneous Raman scattering of crystalline and amorphous solids at high pressure demonstrates that dramatic changes in structure and bonding occur on compression. High-pressure Brillouin scattering is sensitive to the pressure variations of single-crystal elastic moduli and acoustic velocities. Laser heating techniques with the diamond-anvil cell can be used to study phase transitions, including melting, under deep-earth conditions. Finally, laser-induced ruby fluorescence has been essential for the development of techniques for generating the maximum pressures now possible with the diamond-anvil cell, and currently provides a calibrated in situ measure of pressure well above 100 gigapascals.

Hemley, R. J.↗

Robot hands and extravehicular activity

Extravehicular activity (EVA) is crucial to the success of both current and future space operations. As space operations have evolved in complexity so has the demand placed on the EVA crewman. In addition, some NASA requirements for human capabilities at remote or hazardous sites were identified. One of the keys to performing useful EVA tasks is the ability to manipulate objects accurately, quickly and without early or excessive fatigue. The current suit employs a glove which enables the crewman to perform grasping tasks, use tools, turn switches, and perform other tasks for short periods of time. However, the glove's bulk and resistance to motion ultimately causes fatigue. Due to this limitation it may not be possible to meet the productivity requirements that will be placed on the EVA crewman of the future with the current or developmental Extravehicular Mobility Unit (EMU) hardware. In addition, this hardware will not meet the requirements for remote or hazardous operations. In an effort to develop ways for improving crew productivity, a contract was awarded to develop a prototype anthromorphic robotic hand (ARH) for use with an extravehicular space suit. The first step in this program was to perform a a design study which investigated the basic technology required for the development of an ARH to enhance crew performance and productivity. The design study phase of the contract and some additional development work is summarized.

Marcus, Beth↗

Advanced Manned Launch Systems

Advanced Manned Launch Systems (AMLS) studies underway at the NASA Langley Research Center are part of a broader effort examining options for the next U.S. manned space transportation system. AMLS study phases have focused on investigating mission needs and identifying technologies and technology levels, concepts, systems, operational requirements, and life-cycle costs. For near-term technologies and an operations-oriented approach, two-stage vertical-takeoff rocket vehicles with significant levels of reusability are shown to be cost-effective for moderate to high flight rates. All-hydrogen fuel vehicles are also preferred over methane boosted systems from both operational and cost considerations.

Talay, Theodore A.↗

Rapid mix concepts for low emission combustors in gas turbine engines

NASA LeRC has identified the Rich burn/Quick mix/Lean burn (RQL) combustor as a potential gas turbine combustor concept to reduce NOx emissions in High Speed Civil Transport (HSCT) aircraft. To demonstrate reduced NOx levels, NASA LeRC soon will test a flametube version of an RQL combustor. The critical technology needed for the RQL combustor is a method of quickly mixing combustion air with rich burn gases. Two concepts were proposed to enhance jet mixing in a circular cross-section: the Asymmetric Jet Penetration (AJP) concept; and the Lobed Mixer (LM) concept. In Phase 1, two preliminary configurations of the AJP concept were compared with a conventional 12-jet radial-inflow slot design. The configurations were screened using an advanced 3-D Computational Fluid Dynamics (CFD) code named REFLEQS. Both non-reacting and reacting analyses were performed. For an objective comparison, the conventional design was optimized by parametric variation of the jet-to-mainstream momentum flux (J) ratio. The optimum J was then employed in the AJP simulations. Results showed that the three-jet AJP configuration was superior in overall mixedness compared to the conventional design. However, in regards to NOx emissions, the AJP configuration was inferior. The higher emission level for AJP was caused by a single hot spot located in the wake of the central jet as it entered the combustor. Ways of maintaining good mixedness while eliminating the hot spot were identified for Phase 2 study. Overall, Phase 1 showed the viability of using CFD analyses to evaluate quick-mix concepts. A high probability exists that advancing mixing concepts will reduce NOx emissions in RQL combustors, and should be explored in Phase 2, by parallel numerical and experimental work.

Talpallikar, Milind V.↗

Preliminary analysis of LDEF instrument A0187-1: Chemistry of Micrometeoroids Experiment

The Chemistry of Micrometeoroids Experiment (CME) exposed approximately 0.8 sq. m of gold on the Long Duration Exposure Facility's (LDEF's) trailing edge (location A03) and approximately 1.1 sq. m of aluminum in the forward-facing A11 location. The most significant results to date relate to the discovery of unmelted pyroxene and olivine fragments associated with natural cosmic dust impacts. The latter are sufficiently large for detailed phase studies, and they serve to demonstrate that recovery of unmelted dust fragments is a realistic prospect for further dust experiments that will employ more advanced collector media. We also discovered that man-made debris impacts occur on the LDEF's trailing edge with substantially higher frequency than expected, suggesting that orbital debris in highly elliptical orbits may have been somewhat underestimated.

Hoerz, Friedrich↗

The Laser Atmospheric Wind Sounder (LAWS) Preliminary Error Budget and Performance Estimate

The Laser Atmospheric Wind Sounder (LAWS) study phase has resulted in a preliminary error budget and an estimate of the instrument performance. This paper will present the line-of-sight (LOS) Velocity Measurement Error Budget, the instrument Boresight Error Budget, and the predicted signal-to-noise ratio (SNR) performance. The measurement requirements and a preliminary design for the LAWS instrument are presented in a companion paper.

Kenyon, David L.↗

Space Station Furnace Facility Preliminary Project Implementation Plan (PIP). Volume 2, Appendix 2

The Space Station Furnace Facility (SSFF) is an advanced facility for materials research in the microgravity environment of the Space Station Freedom and will consist of Core equipment and various sets of Furnace Module (FM) equipment in a three-rack configuration. This Project Implementation Plan (PIP) document was developed to satisfy the requirements of Data Requirement Number 4 for the SSFF study (Phase B). This PIP shall address the planning of the activities required to perform the detailed design and development of the SSFF for the Phase C/D portion of this contract.

Perkey, John K.↗

[Volume Homeostasis and Renal Function in Rats Exposed to Simulated and Actual Microgravity]

This project has investigated mechanisms that influence alterations in compartmental fluid and electrolyte balance in microgravity and evaluates countermeasures to control renal fluid and electrolyte losses. Determining the alterations due to space flight in fluid compartments and renal function is an important component in understanding long term adaptation to spaceflight and the contribution to post-flight orthostatic intolerance. Four definition phase studies and two studies examining neuro-humoral and vascular mechanisms have been completed.

Tucker, Bryan J.↗

Electrical Power Systems for NASA's Space Transportation Program

Marshall Space Flight Center (MSFC) is the National Aeronautics and Space Administration's (NASA) lead center for space transportation systems development. These systems include earth to orbit launch vehicles, as well as vehicles for orbital transfer and deep space missions. The tasks for these systems include research, technology maturation, design, development, and integration of space transportation and propulsion systems. One of the key elements in any transportation system is the electrical power system (EPS). Every transportation system has to have some form of electrical power and the EPS for each of these systems tends to be as varied and unique as the missions they are supporting. The Preliminary Design Office (PD) at MSFC is tasked to perform feasibility analyses and preliminary design studies for new projects, particularly in the space transportation systems area. All major subsystems, including electrical power, are included in each of these studies. Three example systems being evaluated in PD at this time are the Liquid Fly Back Booster (LFBB) system, the Human Mission to Mars (HMM) study, and a tether based flight experiment called the Propulsive Small Expendable Deployer System (ProSEDS). These three systems are in various stages of definition in the study phase.

Lollar, Louis F.↗