Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optimal configuration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Integration of Low-Fidelity MDO and CFD-Based Redesign of Low-Boom Supersonic Transports

A mixed-fidelity low-boom multidisciplinary optimization (MDO) problem is formulated for integration of low-fidelity MDO and computational fluid dynamics (CFD) based low-boom inverse design optimization. The mixed-fidelity low-boom MDO problem aims to enforce the weight consistency for CFD-based low-boom inverse design optimization: the optimum low-boom configuration is designed for the weight at the start of cruise of the same configuration for the low-boom overland mission. Moreover, it also seeks the optimum trades among the maximum takeoff gross weight (MTOGW), cruise Mach, and range for the low-boom overland mission while meeting the requirement of flying a transatlantic overwater mission. A block coordinate optimization (BCO) method is developed to find an approximate solution of the mixed-fidelity low-boom MDO problem. The BCO method is successfully applied to generate two CFD-based low-boom configurations that closely match two reversed equivalent area targets with ground noise levels below 70 PLdB, respectively. Moreover, these CFD-based low-boom configurations can be obtained with minor wing modifications from the solutions of the low-fidelity MDO problem. The low-fidelity MDO solutions are Pareto points for constrained multiobjective optimization of MTOGW, low-boom cruise Mach, and low-boom range. The best low-boom concept has a predetermined fuselage shape tailored for passengers and main gear storage, carries 40 passengers at seat pitch of 48 in, flies a low-boom overland mission with cruise Mach of 1.8 and range of 2,950 nm, cruises overwater at Mach 1.8 with range of 3,600 nm, satisfies the specified constraints for landing/cruise/takeoff, has MTOGW of 145,164 lb, trims the low-boom cruise flight with fuel redistributions instead of control surface deflections, and has a reversed equivalent area distribution closely matching a target with ground noise level below 70 PLdB.

multidisciplinary optimization↗
NASA NTRSDate not supplied

Integration of Low-Fidelity MDO and CFD-Based Redesign of Low-Boom Supersonic Transports

A mixed-fidelity low-boom multidisciplinary optimization (MDO) problem is formulated for integration of low-fidelity MDO and computational fluid dynamics (CFD) based low-boom inverse design optimization. The mixed-fidelity low-boom MDO problem aims to enforce the weight consistency for CFD-based low-boom inverse design optimization: the optimum low-boom configuration is designed for the weight at the start of cruise of the same configuration for the low-boom overland mission. Moreover, it also seeks the optimum trades among the maximum takeoff gross weight (MTOGW), cruise Mach, and range for the low-boom overland mission while meeting the requirement of flying a transatlantic overwater mission. A block coordinate optimization (BCO) method is developed to find an approximate solution of the mixed-fidelity low-boom MDO problem. The BCO method is successfully applied to generate two CFD-based low-boom configurations that closely match two reversed equivalent area targets with ground noise levels below 70 PLdB, respectively. Moreover, these CFD-based low-boom configurations can be obtained with minor wing modifications from the solutions of the low-fidelity MDO problem. The low-fidelity MDO solutions are Pareto points for constrained multiobjective optimization of MTOGW, low-boom cruise Mach, and low-boom range. The best low-boom concept has a predetermined fuselage shape tailored for passengers and main gear storage, carries 40 passengers at seat pitch of 48 in, flies a low-boom overland mission with cruise Mach of 1.8 and range of 2,950 nm, cruises overwater at Mach 1.8 with range of 3,600 nm, satisfies the specified constraints for landing/cruise/takeoff, has MTOGW of 145,164 lb, trims the low-boom cruise flight with fuel redistributions instead of control surface deflections, and has a reversed equivalent area distribution closely matching a target with ground noise level below 70 PLdB.

low-boom supersonic transports↗
NASA NTRS2021

Integration of Low-Fidelity MDO and CFD-Based Redesign of Low-Boom Supersonic Transports

A mixed-fidelity low-boom multidisciplinary optimization (MDO) problem is formulated for integration of low-fidelity MDO and computational fluid dynamics (CFD) based low-boom inverse design optimization. The mixed-fidelity low-boom MDO problem aims to enforce the weight consistency for CFD-based low-boom inverse design optimization: the optimum low-boom configuration is designed for the weight at the start of cruise of the same configuration for the low-boom overland mission. Moreover, it also seeks the optimum trades among the maximum takeoff gross weight (MTOGW), cruise Mach, and range for the low-boom overland mission while meeting the requirement of flying a transatlantic overwater mission. A block coordinate optimization (BCO) method is developed to find an approximate solution of the mixed-fidelity low-boom MDO problem. The BCO method is successfully applied to generate two CFD-based low-boom configurations that closely match two reversed equivalent area targets with ground noise levels below 70 PLdB, respectively. Moreover, these CFD-based low-boom configurations can be obtained with minor wing modifications from the solutions of the low-fidelity MDO problem. The low-fidelity MDO solutions are Pareto points for constrained multiobjective optimization of MTOGW, low-boom cruise Mach, and low-boom range. The best low-boom concept has a predetermined fuselage shape tailored for passengers and main gear storage, carries 40 passengers at seat pitch of 48 in, flies a low-boom overland mission with cruise Mach of 1.8 and range of 2,950 nm, cruises overwater at Mach 1.8 with range of 3,600 nm, satisfies the specified constraints for landing/cruise/takeoff, has MTOGW of 145,164 lb, trims the low-boom cruise flight with fuel redistributions instead of control surface deflections, and has a reversed equivalent area distribution closely matching a target with ground noise level below 70 PLdB.

low-boom supersonic transports↗
NASA NTRSDate not supplied

Autonomous Constrained Control for Arbitrary Thruster Configurations of Gimbaling Thrusters in SE(3)

In order to develop robust autonomy in spacecraft, it is desirable to develop methods for guiding and controlling arbitrarily-configured spacecraft with any combination of thrusters of various types, i.e. either static reaction control system thrusters and gimbaling thrusters. Scenarios in which autonomous selection of thrusters may be needed include the case of a stuck or inhibited thruster that restricts the motion of the vehicle, vehicles with changing mass properties such as logistics modules or tugs, or vehicles that have imposed constraints on thrusters during docking in order to avoid plume impingement on a space station or adjacent spacecraft. To that end, a spacecraft must be able to rapidly and autonomously reconfigure thruster firing histories and update guidance protocols in accordance with newly imposed constraints. In this paper, a methodology is presented that enables a spacecraft to autonomously select thrusters of any configuration and type in order to optimally match a desired 6-degree-of-freedom navigation and control within the special Euclidean SE(3) framework. The residual motion imposed by off-nominal thruster configurations or thrusters that are not fully controllable is identified by the spacecraft and solved for over time, both for static reaction control systems and for the case of gimbaling thrusters.

GN&C↗
DOE OSTI2025

Plant Reload Optimization (prlo)

The PRLO framework is built on a modular and extensible architecture that tightly couples advanced evolutionary optimization algorithms with nuclear fuel depletion solvers (i.e., nuclear physics neutronics code). It supports exploring complex, high-dimensional design spaces constrained by user-specified operational, safety, and economic constraints. Objectives such as minimizing fresh fuel enrichment, flattening radial and axial power distributions, and maximizing discharge burnup are evaluated. PRLO’s equilibrium cycle optimization capability enables the identification of core configurations that maintain fuel cycle sustainability over extended planning horizons. Its integration with the RAVEN platform facilitates optimization of loading patterns or fuel shuffling schemes across multiple cycles. The interface with SIMULATE, a licensed industry-standard nodal code developed by Studsvik, ensures accurate neutronic and thermal-hydraulic feedback for reactor core design. PRLO’s automated workflow engine supports iterative design refinement, enabling utilities to streamline core design processes and meet evolving performance and regulatory targets.

Kim, Junyung [Idaho National Laboratory] (00090005↗
NASA NTRS1983

Design considerations for FET-gated power transistors

An FET-bipolar combinational power transistor configuration (tested up to 300 V, 20 A at 100 kHz) is described. The critical parameters for integrating the chips in hybrid form are examined, and an effort to optimize the overall characteristics of the configuration is discussed. Chip considerations are examined with respect to the voltage and current rating of individual chips, the FET surge capability, the choice of triple diffused transistor or epitaxial transistor for the bipolar element, the current tailing effect, and the implementation of the bipolar transistor and an FET as single chip or separate chips. Package considerations are discussed with respect to package material and geometry, surge current capability of bipolar base terminal bonding, and power losses distribution.

Chen, D. Y.↗
DOE OSTI2020

Moving from residual lignocellulosic biomass into high–value products: Outcomes from a long–term international cooperation

Major progress in the bioprocessing of lignocellulose to fuels and value-added chemicals has created the possibility of a low carbon-footprint economy. However, the current complexity and associated costs of lignocellulose conversion result in a higher price for ethanol than for fossil fuels. The cost of cellulosic ethanol production will be lowered by further progress in development of biorefinery technology that produces both ethanol and high-value chemicals with bio-based products that are beginning to penetrate consumer markets in the USA, Brazil, and worldwide. The cost-effectiveness of low carbon-footprint bioproducts will benefit from advances in supplying large amounts of biomass solids to the biorefinery. We describe here outcomes from a successful long-term international cooperation between the Laboratory of Renewable Resources Engineering (LORRE) at Purdue University in the United States and Brazil's Agricultural Research Corporation (EMBRAPA) and Federal University of Sâo Carlos (UFSCar), which has contributed practical pathways to enhance the biorefinery concept. Furthermore, this paper gives an overview of developments that address fundamental knowledge of lignocellulosic biomass pretreatment hydrolysis under optimized operational conditions and bioreactor configurations, and the science and engineering that contributes to the effective production of fuel and ethanol and value-added products from biomass.

09 BIOMASS FUELS↗
DOE OSTI2024

A high-volume resonator for L-band DNP-NMR

DNP-NMR and EPR experiments that operate at or greater than L-band (i.e., ν 0 (e – ) = 1–2 GHz) are typically limited to maximum sample volumes of several hundred µL. These experiments rely on well-known resonator designs for DNP/EPR irradiation such as the loop-gap resonator and Alderman-Grant coil, where their maximum volumes limit further application to imaging experiments and high-throughput screening beyond L-band. Herein, we demonstrate a birdcage (BC) resonator design that can accommodate several mL of sample while operating around 1.5 GHz. The sample volume is maximized by using two identical BC resonators in a stacked configuration. Simulations are used to optimize the BC design and the performance is validated experimentally with liquid-state Overhauser-DNP-NMR experiments. This BC design exploits just the parasitic capacitance of conductive rings and features no fixed tuning capacitors. An enhancement of –77 is achieved on a 10 mM 4-Amino-TEMPO in H 2 O sample for a 5 mL sample volume. Finally, the associated sample heating is minimal due to the low-E-fields generated and the large sample mass with +3.4 K when driving 100 W for several seconds.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Understanding the effect of salt concentrations on fast charging performance of Li-ion cells

Here, different lithium salt (lithium bis(fluorosulfonyl) imide (LiFSI)/LiPF 6 9/1 mol ratio) concentrations in carbonate electrolyte were studied on the fast charging performance of LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622)/graphite pouch cells. The cells with electrolyte concentration from 0.75 M to 1.50 M showed similar fast charging capabilities. Further increase of the concentration to 1.75 M and 2.00 M decreased the attainable capacity in fast charging. In the long-term cycling test, the capacity retention after 200 fast charging cycles increased with the increase of salt concentration in electrolyte. Cells with 1.5 M electrolyte showed the best overall performance in fast charging capacity and long-term cycling. Li platings were observed in the cells with 0.75 M, 1.00 M and 1.25 M electrolyte. It was improved with greatly reduced Li plating area in 1.50 M, and no Li plating at all in 1.75 M and 2.00 M electrolyte. Post-mortem analysis such as neutron powder diffraction (NPD) and X-ray photoelectron spectroscopy (XPS) were used to characterize the electrode after cycling. It suggests that electrolyte concentration needs to be optimized for a given cell configuration with specific electrode and loading.

25 ENERGY STORAGE↗
DOE OSTI2019

Large area planar photocathode for MCP-based photodetectors

We report on the principle, design, fabrication, and characterization of a large-area planar bialkali photocathode. Herein, sequential photocathode growth process was investigated, and the growth parameters, especially the initial antimony layer thickness, were optimized. The source arrangement and configuration were also simulated and the preferred configuration was chosen for numerical and experimental studies. Photocathode with average QE of 18% and activation area of similar to 40 square inches was experimentally demonstrated, making it a candidate for MCP-based photodetector applications. Further improvements were also discussed to enhance the uniformity and QE value of the photocathodes.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Hydrogen production in microbial electrolysis cells with biocathodes

Electroautotrophic microbes at biocathodes in microbial electrolysis cells (MECs) can catalyze the hydrogen evolution reaction with low energy demand, facilitating long-term stable performance through specific and renewable biocatalysts. However, MECs have not yet reached commercialization due to a lack of understanding of the optimal microbial strains and reactor configurations for achieving high performance. Here, we critically analyze the criteria for the inocula selection, with a focus on the effect of hydrogenase activity and microbe–electrode interactions. We also evaluate the impact of the reactor design and key parameters, such as membrane type, composition, and electrode surface area on internal resistance, mass transport, and pH imbalances within MECs. Furthermore, this analysis paves the way for advancements that could propel biocathode-assisted MECs toward scalable hydrogen gas production.

Biotechnology & Applied Microbiology↗
DOE OSTI2025

Design Overview of a High-Pressure Helium Flow Visualization Apparatus for Blanket Cooling Studies

Cooling of the fusion blanket first wall remains a significant challenge given the adverse conditions of heat and particle flux encountered near the plasma. Helium emerges as an attractive cooling candidate because of its chemical and neutronic inertness and separability from hydrogenic species (e.g. tritium). Because of the low thermal mass of helium, optimization of these coolant channels is warranted to provide high heat transfer performance at low pumping costs. Increasingly, computational fluid dynamics (CFD) simulations are employed to model and optimize these flow channels, and accompanying experimental data are needed to validate the predictions of these models. To provide the aforementioned experimental data, a high-pressure helium flow visualization upgrade has been designed for the Helium Flow Loop Experiment facility. This apparatus was built to American Society of Mechanical Engineers boiler and pressure vessel standards to withstand operating pressure of 4 MPa and mated to high-pressure glass windows. Seedless flow visualization is performed via high-speed background oriented schlieren (BOS), with image correlation used for time-resolved two-dimensional velocimetry at frequencies in excess of 60 kHz. Rectangular flow channel test articles are additively manufactured via laser powder bed fusion and installed into this visualization apparatus, with one-sided heating supplied by resistive heaters. In conclusion, the chosen test geometries were informed by prior CFD simulations, and the helium flow structures observed via BOS (detachment, recirculation, etc.) will be used for the validation of these accompanying models, in support of the design and optimization of blanket cooling channel configurations.

Helium flow↗
DOE OSTI2024

MARS-F/K modeling of plasma response and fast ion losses due to RMP in KSTAR

Abstract The toroidal single-fluid magnetohydrodynamic (MHD) code MARS-F (Liu et al 2000 Phys. Plasmas 7 3681) and the MHD-kinetic hybrid code MARS-K (Liu et al 2008 Phys. Plasmas 15 112503) are utilized to study the plasma response to the n = 1 ( n is the toroidal mode number) resonant magnetic perturbation (RMP), applied to suppress the type-I edge localized mode (ELM) in a KSTAR discharge. Both the resistive-rotating and ideal-static plasma models identify strong screening of the resonant radial field harmonics of the applied RMP due to the plasma response, and predict a strong edge-peeling response of the plasma which is consistent with the optimal ELM control coil current configuration adopted in experiment. The RMP-induced radial displacement of the plasma, computed by the resistive-rotating plasma model, agrees reasonably well with that reconstructed from the measured data in the plasma core. Taking into account the drift kinetic response of fast ions, MARS-K hybrid modeling also finds quantitative agreement of the plasma core fluid pressure perturbation with experiment. Based on the MARS-F computed plasma response, a guiding-center orbit-tracing simulation finds about 0.3% of fast ion losses due the n = 1 RMP in the KSTAR ELM control experiment considered. Most losses are associated with counter-current fast ions located near the plasma edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Outlook for artificial intelligence and machine learning at the NSLS-II

Abstract We describe the current and future plans for using artificial intelligence and machine learning (AI/ML) methods at the National Synchrotron Light Source II (NSLS-II), a scientific user facility at the Brookhaven National Laboratory. We discuss the opportunity for using the AI/ML tools and techniques developed in the data and computational science areas to greatly improve the scientific output of large scale experimental user facilities. We describe our current and future plans in areas including from detecting and recovering from faults, optimizing the source and instrument configurations, streamlining the pipeline from measurement to insight, through data acquisition, processing, analysis. The overall strategy and direction of the NSLS-II facility in relation to AI/ML is presented.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Efficient frequency allocation for superconducting quantum processors using improved optimization techniques

Building on previous research on frequency allocation optimization for superconducting circuit quantum processors, this work incorporates several techniques to improve overall solution quality. Here, we introduce constraints and imposed edgewise differences help to improve the optimization results. We also introduce optimization variables for the orientation of each edge, defined as the direction from the control qubit to the target qubit, to be chosen during optimization. To scale up to larger processors, multimodule designs are employed with various boundary conditions, thereby enhancing the collective yield. These enhancements allow for greater flexibility in processor design by eliminating the need for handpicked orientations. We support the efficient assembly of large processors with dense connectivity by choosing the best boundary conditions. Examples demonstrate that, at low computational cost, this optimization approach finds a frequency configuration for a square chip with over 1000 qubits and over 10% yield at much larger dispersion levels than required by previous approaches.

Zhang, Zewen [Argonne National Laboratory (ANL), A↗
DOE OSTI2020

Harmonics and Stability Evaluation of Converter-Interfaced Combined Heat and Power Units

Grid integration of medium-sized combined heat and power (CHP) units is challenging due to strict grid codes and conventional generators lack of control flexibility to meet these grid codes. Adding a two-stage ac-dc-ac power electronics interface between the generator and the utility grid will accelerate the interconnection process of CHP units. For the dc-ac stage, a voltage source converter (VSC) has been widely used as a grid-tied inverter because of its fast control and low total harmonics distortion (THD). In this paper, several topologies of generator-side rectifiers for ac-dc power conversion are explored and analyzed. The harmonics impact of various rectifiers on the CHP generator are evaluated. The overall cost of the electrical system, when using various types of rectifiers, is assessed and the VSC back-to-back converter interface configuration is found to be optimal. The overall system stability is also examined using small-signal impedance analysis to assess potential instability issues at the system level.

CHP, Harmonics, Generator Rectifier Unit, DC Imped↗
DOE OSTI2020

Performance simulation of the soft gamma-ray concentrator

The soft gamma-ray concentrator is a telescope mission concept utilizing a suitable arrangement of bent multilayer structures of alternating low- and high-density materials. This lens is able to channel gamma-ray photons via total external reflection and concentrate the incident radiation to a point. The channeling technique offers the potential for concentrating gamma rays with focal lengths <10 m and energies >100 keV, beyond the reach of current grazing-incidence hard x-ray mirrors. For the performance estimation of such an instrument, we have developed a flexible set of computer modeling tools to compute the optical properties of multilayer structures, predict the channeling efficiency for a given multilayer configuration, and aid in the optimization of potential gamma-ray concentrator-based telescope designs. This modeling includes the multilayer optical properties calculated by the IMD software, the ray tracing using an IDL code, and the focal plane detector simulation by MEGAlib. We illustrate the potential of this approach by presenting simulated astronomical observations from a balloon-borne platform. The final result, including simulated effective area, instrument sensitivity, and polarization performance, shows that the gamma-ray concentrator will provide greatly increased sensitivity for next-generation soft gamma-ray missions with modest cost and complexity.

47 OTHER INSTRUMENTATION↗