Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nuclear level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Point Defect Characterization in CdZnTe

Measurements of the defect levels and performance testing of CdZnTe detectors were performed by means of Current Deep Level Transient Spectroscopy (I-DLTS), Transient Charge Technique (TCT), Current versus Voltage measurements (I-V), and gamma-ray spectroscopy. CdZnTe crystals were acquired from different commercial vendors and characterized for their point defects. I-DLTS studies included measurements of defect parameters such as energy levels in the band gap, carrier capture cross sections, and defect densities. The induced current due to laser-generated carriers was measured using TCT. The data were used to determine the transport properties of the detectors under study. A good correlation was found between the point defects in the detectors and their performance.

36 MATERIALS SCIENCE↗

Multi-Physics Simulation of The TRIGA Reactor

In nuclear engineering, the description of phenomena occurring in the core involves a coupling between neutronic and thermal hydraulics through the so called reactivity or thermal feedback. In water cooled reactor, thermal feedback and temperature coefficients of reactivity are important, when temperature changes, microscopic cross sections change as well impacting directly the neutron flux and so the thermal power. Other feedback, such as the variation of the macroscopic cross section due to a modification of the density can also have a significant impact on the core performance of the reactor. Those reasons were naturally leading in the development of coupling method in order to predict correctly the behaviour of the core in normal operation and accidental situation. This work describes the coupling scheme developed for the description of the TRIGA mark II reactor at JSI. The demonstration case presented here, the reactor is operating in steady state configuration at several power levels. The aim of our calculation was, for a given thermal power of the reactor, to numerically reproduce fuel temperature value monitored during reactor operation. The expected impact of the control rod on the neutron flux distribution was also verified. The predictions of the coupling scheme seem to be correct according to the few temperature measurements available and the expected neutron flux behaviour expecting from a control rod motion. We are considering precise measurement of the fuel temperature at more positions but also in the coolant channels between the fuel elements to complete the experimental validation phase. An upgrade of the coupling scheme into the transient mode is also considered to observe self-stabilisation of the power level, after a control rod perturbation, due to the negative temperature reactivity coefficient of the fuel. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Use of the Far Infrared Tangential Interferometer/Polarimeter diagnostic for the study of rf driven plasma waves on NSTX

A rf detection system for waves in the 30 MHz range has been constructed for the Far Infrared Tangential Interferometer/Polarimeter on National Spherical Torus Experiment (NSTX). It is aimed at monitoring high frequency density fluctuations driven by 30 MHz high harmonic fast wave fields. The levels of density fluctuations at various radial chords and antenna phase angles can be estimated using the electric field calculated by TORIC code and linearized continuity equation for the electron density. In this paper, the experimental arrangement for the detection of rf signal and preliminary results of simulation will be discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Cold nuclear matter effects in J/(psi) production

Lattice QCD predicts that, above a certain critical energy density or temperature, strongly interacting matter undergoes a phase transition from the hadronic world to a quark-gluon plasma state, where the coloured quarks and gluons are no longer bound to colourless hadrons. The suppression of quarkonium production in high-energy nuclear collisions is one of the most interesting signatures of QGP formation, for two reasons: due to their large masses, charm and beauty quarks are created only in the initial hard scattering processes, before the QGP is formed; and the Q{bar Q} binding potential should be screened in the deconfined colour medium. Until the LHC starts colliding Pb nuclei, charm is the heaviest quark that can check the validity of the finite temperature QCD predictions, given the much smaller beauty production cross sections. However, the interpretation of the presently available results on charmonium suppression in heavy-ion collisions, obtained at the SPS and RHIC, is hampered by a multitude of other 'nuclear effects', which exist even in the absence of QGP formation, such as the badly understood nuclear modifications of the gluon distribution functions, the level of energy lost by the partons traversing the nuclei before producing the Q{bar Q} pair, the rate at which the nascent quarkonium state is broken up by the surrounding nuclear matter, etc. Fortunately, most of these 'cold nuclear matter' effects can be studied on the basis of proton-nucleus measurements. However, care must be taken when converting the p-A observations into a reference baseline that can be used in the analysis of the heavy-ion data. In particular, it has recently been shown [1] that it is wrong to assume that the rate of final-state Glauber-like J/{psi} absorption, usually called the 'J/{psi} absorption cross section', {sigma}{sub abs}{sup J/{psi}}, is independent of the collision energy and of the charmonium kinematics, as was previously assumed in the analysis of the SPS heavy-ion data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Deconvolution of Thomson scattering temperature profiles

Deconvolution of Thomson scattering (TS) profiles is required when the gradient length of the electron temperature (T{sub e}) or density (n{sub e}) are comparable to the instrument function length ({Delta}{sub R}). The most correct method for deconvolution to obtain underlying T{sub e} and n{sub e} profiles is by consideration of scattered signals. However, deconvolution at the scattered signal level is complex since it requires knowledge of all spectral and absolute calibration data. In this paper a simple technique is presented where only knowledge of the instrument function I(r) and the measured profiles, T{sub e,observed}(r) and n{sub e,observed}(r), are required to obtain underlying T{sub e}(r) and n{sub e}(r). This method is appropriate for most TS systems and is particularly important where high spatial sampling is obtained relative to {Delta}{sub R}.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Weak decay rates for neutron-deficient Kr isotopes relevant for the rp process

Weak interaction rates under stellar density and temperature conditions relevant for the rp process are studied in neutron-deficient Kr isotopes. The nuclear structure part of the problem is described within the deformed Skyrme Hartree-Fock+BCS+QRPA, which reproduces not only the beta-decay half-lives but also the available Gamow-Teller strength distributions, measured under terrestrial conditions. The various sensitivities of the decay rates to both density and temperature are discussed. In particular, we study the contributions coming from excited states in the parent nucleus, which are thermally populated, and the competition between beta-decays and continuum electron captures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Eddington-inspired Born-Infeld gravity: nuclear physics constraints and the validity of the continuous fluid approximation

In this paper we investigate the classical non-relativistic limit of the Eddington-inspired Born-Infeld theory of gravity. We show that strong bounds on the value of the only additional parameter of the theory κ, with respect to general relativity, may be obtained by requiring that gravity plays a subdominant role compared to electromagnetic interactions inside atomic nuclei. We also discuss the validity of the continuous fluid approximation used in this and other astrophysical and cosmological studies. We argue that although the continuous fluid approximation is expected to be valid in the case of sufficiently smooth density distributions, its use should eventually be validated at a quantum level.

79 ASTRONOMY AND ASTROPHYSICS↗

Irradiation response of commercial, high-Tc superconducting tapes: Electromagnetic transport properties

Effects of low dose irradiation on the electrical transport current properties of commercially available high-temperature superconducting, coated-conductor tapes were investigated, in view of potential applications in the irradiative environment of fusion reactors. Three different tapes, each with unique as-grown flux-pinning structures, were irradiated with Au and Ni ions at energies that provide a range of damage effects, with accumulated damage levels near that expected for conductors in a fusion reactor environment. Measurements using transport current determined the pre- and post-irradiation resistivity, critical current density, and pinning force density, yielding critical temperatures, irreversibility lines, and inferred vortex creep rates. Results show that at the irradiation damage levels tested, any detriment to as-grown pre-irradiation properties is modest; indeed in one case already-superior pinning forces are enhanced, leading to higher critical currents.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nuclear Shape Transitions From a Microscopic Approach

Self-consistent Hartree-Fock-Bogoliubov calculations based on Gogny and Skyrme density-dependent interactions are performed to study the evolution of ground-state nuclear shapes with the number of nucleons in various isotopic chains. Signatures of critical point symmetries are analyzed by studying potential energy surfaces including triaxial degrees of freedom.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear and hybrid equations of state in light of the low-mass compact star in HESS J1731-347

Here, we sample over 500 relativistic mean-field theories constrained by chiral effective-field theory and properties of isospin-symmetric nuclear matter and test them against known stellar structure constraints. This includes a recent mass and radius measurement of a compact object in supernova remnant HESS J1731-347, with an unusually low mass of M = 0.77$^{+0.20}_{–0.17}$M ⊙ and a compact radius of R = 10.4$^{+0.86}_{–0.78}$ km. We show that none of the sampled nuclear models meet all constraints at the 68% credibility level, but that hybrid equations of state with a quark-matter inner core and nuclear outer core easily can. This indicates a tension between astrophysical constraints and low-energy nuclear theory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Review of radiation-induced defects in GaAs

Radiation-resilient optoelectronic materials are highly desired in space and nuclear applications, and understanding the relevant defects and electronic processes in those materials is crucial for both current and next-generation applications. GaAs is a prototypical semiconductor that serves as a foundational system for describing and understanding optoelectronic devices. In this review, both experimental studies and molecular dynamics (MD) simulations of irradiated GaAs are reviewed, with particular emphasis on the deep-level transient spectroscopy, irradiation-induced amorphization zones, and MD predictions of damage structures. The MD results are also compared to predictions of the non-ionized energy-loss model. Recent theoretical studies, in particular, density functional theory based calculations on the simple intrinsic defects and defect clusters in GaAs, are also reviewed. These defects have an important role in dictating the evolution of GaAs in radiation damage environments, as they impact the coupled dynamics of charge carriers. Finally, possible gaps and challenges toward the general understanding of defect evolution in GaAs are discussed.

36 MATERIALS SCIENCE↗

Analysis of a Mars-stationary orbiting microwave power transmission system

To determine the feasibility of providing efficient RF power transmission from a Mars-stationary orbit to the surface of the planet, an assessment was made focussing on RF propagation in the 2.45- to 300-GHz range. The proposed orbiting system configuration provides for power generation by either photovoltaic array or nuclear reactor, the conversion of the dc output to RF, and subsequent propagation of RF energy from the orbiting array to the Martian surface. On the planet, a rectenna array will convert RF to dc power to be distributed for planetary power needs. Total efficiency of the energy conversion chain from dc to RF in orbit through RF to dc on the planetary surface was derived for several representative frequencies in the range of study. Tradeoffs between component efficiency and transmitting antenna requirements were considered for each of these frequencies. Rectenna element power density thresholds and desired received power levels were used to determine receiving antenna criteria. Recommendations are presented for research into developing technologies which may afford enhanced viability of the proposed microwave power transmission system.

Long, Kenwyn J.↗

NUCLEAR INCIDENT CAPABILITIES, KNOWLEDGE & ENABLER LEVERAGING

The detonation of a 10 Kiloton Improvised Nuclear Device (IND) is a serious scenario that the United States must be prepared to address. The likelihood of a single nuclear bomb exploding in a single city is greater today than at the height of the Cold War. Layered defenses against domestic nuclear terrorism indicate that our government continues to view the threat as credible. The risk of such an event is further evidenced by terrorists desire to acquire nuclear weapons. The act of nuclear terrorism, particularly an act directed against a large population center in the United States, will overwhelm the capabilities of many local and state governments to respond, and will seriously challenge existing federal response capabilities. A 10 Kiloton IND detonation would cause total infrastructure damage in a 3-mile radius and levels of radiation spanning out 3,000 square miles. In a densely populated urban area, the anticipated casualties would be in excess of several hundred thousand. Although there would be enormous loss of life, housing and infrastructure, an IND detonation is a recoverable event. We can reduce the risk of these high-consequence, nontraditional threats by enhancing our nuclear detection architecture and establishing well planned and rehearsed plans for coordinated response. It is also important for us to identify new and improved ways to foster collaboration regarding the response to the IND threat to ensure the demand and density of expertise required for such an event is postured and prepared to mobilize, integrate, and support a myriad of anticipated challenges. We must be prepared to manage the consequences of such an event in a deliberate manner and get beyond notions of total devastation by adopting planning assumptions around survivability and resiliency. Planning for such a scenario needs to be decisive in determining a response based on competencies and desired outcomes. It is time to synthesize known threats and plausible consequences into action. Much work needs to be accomplished to enhance nuclear preparedness and to substantially bolster and clarify the capacity to deploy competent resources. Until detailed plans are scripted, and personnel and other resources are postured, and exercised, IND specific planning remains an urgent need requiring attention and action. Although strategic guidance, policies, concepts of operations, roles, responsibilities, and plans governing the response and consequence management for the IND scenario exist, an ongoing integration challenge prevails regarding how best to get capable and competent surge capacity personnel (disaster reservists) and other resources engaged and readied in an up-front manner with pre-scripted assignments to augment the magnitude of anticipated demands of expertise. With the above in mind, Savannah River National Laboratory (SRNL) puts science to work to create and deploy practical, high-value, cost-effective nuclear solutions. As the Department of Energy's (DOE) applied research and development laboratory, SRNL supports Savannah River Site (SRS) operations, DOE, national initiatives, and other federal agencies, across the country and around the world. SRNL's parent at SRS also employs more than 8,000 personnel. The team is a great asset that seeks to continue their service in the interest of national security and stands ready to accomplish new missions. Overall, an integral part of the vision for SRNL's National and Homeland Security Directorate is the establishment of a National Security Center at SRNL, and development of state of the science capabilities (technologies and trained technical personnel) for responding to emergency events on local, regional, or national scales. This entails leveraging and posturing the skills, knowledge and experience base of SRS personnel to deliver an integrated capability to support local, state, and federal authorities through the development of pre-scripted requests for assistance, agreements, and plans. It also includes developing plans, training, exercises, recruitment strategies, and processes to establish a 1,000 plus person nuclear disaster workforce capable of providing surge capacity support that can be deployed in part or in all.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Millimeter-wave radiometer diagnostics of harmonic electron cyclotron emission in the Levitated Dipole Experiment

A 110/137 GHz radiometer pair with collimated antenna pattern is being used to diagnose optically thin harmonic electron cyclotron emission from hot electrons in LDX. Signal levels of 0.1-1 keV and 110/137 ratios of 2-4 stationary with ECRH power have been observed. The large plasma core magnetic field gradient causes all relevant harmonics to be simultaneously viewed over a <(k,B) angular range of 0 deg. - 90 deg. representing a unique geometry for interpretation of ECE in terms of hot electron temperature and density.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Assessing Implicit and Explicit Polarizable Solvation Models for Nuclear–Electronic Orbital Systems: Quantum Proton Polarization and Solvation Energetics

Accurate simulations of many chemical processes require the inclusion of both nuclear quantum effects and a solvent environment. The nuclear–electronic orbital (NEO) approach, which treats electrons and select nuclei quantum mechanically on the same level, combined with a polarizable continuum model (PCM) for the solvent environment, addresses this challenge in a computationally practical manner. In this work, the NEO-PCM approach is extended beyond the IEF-PCM (integral equation formalism PCM) and C-PCM (conductor PCM) approaches to the SS(V)PE (surface and simulation of volume polarization for electrostatics) and ddCOSMO (domain decomposed conductor-like screening model) approaches. IEF-PCM, SS(V)PE, C-PCM, and ddCOSMO all exhibit similar solvation energies as well as comparable nuclear polarization within the NEO framework. The calculations show that the nuclear density does not leak out of the molecular cavity because it is much more localized than the electronic density. Finally, the polarization of quantized protons is analyzed in both continuum solvent and explicit solvent environments described by the polarizable MB-pol model, illustrating the impact of specific hydrogen-bonding interactions captured only by explicit solvation. Furthermore, these calculations highlight the relationship among solvation formalism, nuclear polarization, and energetics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interplay of structural fluctuations and charge carrier dynamics is key for high performance of hybrid lead halide perovskites

The ability of methylammonium lead triiodide (MAPbI 3 ) to achieve photoelectric conversion efficiency that is on par with crystalline silicon has led to a surge of interest in perovskite photovoltaics. However, an in-depth understanding of how the ubiquitous coupling between the fast rovibrational movements of the organic cations and the phonon vibrations of the inorganic framework affects the relaxation and recombination of hot carriers remains largely elusive. Access to such knowledge is critical to guide design and increase efficiency of new classes of perovskite solar cells. In this report, we report a time-domain ab initio investigation of temperature dependent excited state dynamics in MAPbI 3 , with particular emphasis on nuclear anharmonic effects. The observed strong anharmonicity is attributed to softness of the material and unusual dynamical coupling between the organic and inorganic components. At an elevated temperature, the hydrogen bonding between MA and iodines is weakened, enhancing rotation of MA cations, which become more dynamically disordered. As a result, thermal vibrations of the inorganic Pb–I sublattice are suppressed, and the lattice anharmonicity is decreased. Thermal fluctuations of the electronic energy levels are found to follow the trend of anharmonic motions of Pb and I atoms, with holes relaxing faster to the band edges than electrons, due to higher density of the hole states. While elevated temperature accelerates intraband carrier cooling, it slows nonradiative carrier recombination. The latter result is important for performance, since solar cells and other devices heat up during operation. The reported signatures of coupled structural dynamics of the organic cations and inorganic framework unravel the interplay between anomalous structural fluctuations and charge carrier dynamics, which is of particular importance for fundamental understanding of the structure–property relationships in hybrid metal halide perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of correlated states and optimization of nuclear reactions for low-energy particles at nonresonant low-frequency modulation of a potential well

A method for the formation of correlated coherent states of low-energy particles in a parabolic potential well owing to the full-scale low-frequency modulation ω(t) = ω{sub 0}sinΩt of the parameters of this well has been considered. It has been shown that such a modulation in the absence of a stochastic force acting on a particle results in the fast formation of correlated coherent states and in an increase in the correlation coefficient and transparency of the potential barrier to the limiting values vertical bar r(t) vertical bar {sub max} → 1 and D → 1. The presence of the stochastic force significantly affects the evolution of correlated coherent states, decreasing the rate of an increase in the correlation coefficient vertical bar r(t) vertical bar {sub max} (at Ω ≤ 10{sup −4}ω{sub 0}) and limiting it at the level vertical bar r(∞) vertical bar {sub max} < 1 (at Ω = (0.001–0.1)ω{sub 0}); vertical bar r(∞) vertical bar {sub max} increases with a decrease in the frequency of modulation and decreases with an increase in the intensity of the stochastic force. It has been shown that, at a realistic relation between the parameters, low-frequency modulation can ensure such vertical bar r vertical bar {sub max} value that the transparency of the potential barrier for low-energy particles increases by a factor of 10{sup 50}–10{sup 100} or larger. The mechanism of the formation of correlated coherent states for charged particles in a gas or a low-pressure plasma placed in a low-frequency magnetic field has been considered. We have determined the relation between the magnetic field strength and modulation frequency, as well as the relation between the temperature and density of the gas (plasma), at which the method under consideration can be used to optimize nuclear reactions at low energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Report of the Task Group 186 on model-based dose calculation methods in brachytherapy beyond the TG-43 formalism: Current status and recommendations for clinical implementation

The charge of Task Group 186 (TG-186) is to provide guidance for early adopters of model-based dose calculation algorithms (MBDCAs) for brachytherapy (BT) dose calculations to ensure practice uniformity. Contrary to external beam radiotherapy, heterogeneity correction algorithms have only recently been made available to the BT community. Yet, BT dose calculation accuracy is highly dependent on scatter conditions and photoelectric effect cross-sections relative to water. In specific situations, differences between the current water-based BT dose calculation formalism (TG-43) and MBDCAs can lead to differences in calculated doses exceeding a factor of 10. MBDCAs raise three major issues that are not addressed by current guidance documents: (1) MBDCA calculated doses are sensitive to the dose specification medium, resulting in energy-dependent differences between dose calculated to water in a homogeneous water geometry (TG-43), dose calculated to the local medium in the heterogeneous medium, and the intermediate scenario of dose calculated to a small volume of water in the heterogeneous medium. (2) MBDCA doses are sensitive to voxel-by-voxel interaction cross sections. Neither conventional single-energy CT nor ICRU/ICRP tissue composition compilations provide useful guidance for the task of assigning interaction cross sections to each voxel. (3) Since each patient-source-applicator combination is unique, having reference data for each possible combination to benchmark MBDCAs is an impractical strategy. Hence, a new commissioning process is required. TG-186 addresses in detail the above issues through the literature review and provides explicit recommendations based on the current state of knowledge. TG-43-based dose prescription and dose calculation remain in effect, with MBDCA dose reporting performed in parallel when available. In using MBDCAs, it is recommended that the radiation transport should be performed in the heterogeneous medium and, at minimum, the dose to the local medium be reported along with the TG-43 calculated doses. Assignments of voxel-by-voxel cross sections represent a particular challenge. Electron density information is readily extracted from CT imaging, but cannot be used to distinguish between different materials having the same density. Therefore, a recommendation is made to use a number of standardized materials to maintain uniformity across institutions. Sensitivity analysis shows that this recommendation offers increased accuracy over TG-43. MBDCA commissioning will share commonalities with current TG-43-based systems, but in addition there will be algorithm-specific tasks. Two levels of commissioning are recommended: reproducing TG-43 dose parameters and testing the advanced capabilities of MBDCAs. For validation of heterogeneity and scatter conditions, MBDCAs should mimic the 3D dose distributions from reference virtual geometries. Potential changes in BT dose prescriptions and MBDCA limitations are discussed. When data required for full MBDCA implementation are insufficient, interim recommendations are made and potential areas of research are identified. Application of TG-186 guidance should retain practice uniformity in transitioning from the TG-43 to the MBDCA approach.

61 RADIATION PROTECTION AND DOSIMETRY↗