Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Magnetic and electronic structures of antiferromagnetic topological material candidate EuMg 2 Bi 2

In this work, EuMg 2 Bi 2 has been investigated to understand the electronic and magnetic behaviors as an antiferromagnetic (AFM) topological semimetal candidate. High-quality single crystals of EuMg 2 Bi 2 were grown via a Bi flux and, subsequently, characterized to be consistent with the previously reported bulk magnetic and resistivity properties. A ferromagnetic interaction is indicated by the positive Curie–Weiss temperature obtained through fitting the bulk magnetic susceptibility data. The bulk resistivity measurements reveal an interesting electronic behavior that is potentially influenced by a competing antiferromagnetic and ferromagnetic interaction in and out of the ab plane. From the resulting refinement of the neutron diffraction data, EuMg 2 Bi 2 was found to exhibit an A-type magnetic structure with Eu 2+ moments ferromagnetically aligned in the plane and antiferromagnetically stacked between neighbor ferromagnetic Eu layers. The power law fitting magnetic ordering parameter below TN~8 K agrees with the 2D Heisenberg model, indicating a weak interlayer antiferromagnetic interaction. Considering the magnetic structure determined by neutron diffraction, the surface state calculation suggests that EuMg 2 Bi 2 is an AFM topological insulator candidate. Linearly dispersed Dirac surface states were also observed in our angle-resolved photoemission spectroscopy measurements, consistent with the calculation.

36 MATERIALS SCIENCE↗

Enhanced Mixed Electronic-Ionic Conductors through Cation Ordering

The performance of many energy conversion and storage devices depend on the properties of mixed ionic-electronic conducting (miec) materials. Mixed or ambipolar conductors simultaneously transport ions and electrons and provide the critical interface between chemical and electrical energy in devices such as fuel cells, ion transport membranes, and batteries. Enhancements in storage capacity, reversibility, power density and device lifetime all require new materials and a better understanding of the fundamentals of ambipolar conductivity and surface reactivity.The high temperature properties of the ordered perovksites AA’B 2 O 5+x , where A = rare earth ion, Y and B = Ba, Sr were studied. The work was motivated by the high oxygen transport and surface exchange rates observed for members of this class of mixed ionic and electronic conductors. A combined experimental and computational approach, including structural, electrochemical, and transport characterization and modeling was used. The approach attacks the problem simultaneously at global (e.g., neutron diffraction and impedance spectroscopy), local (e.g., pair distribution function, nuclear magnetic resonance) and molecular (ab initio thermokinetic modeling) length scales. The objectives of the work were to understand how the cation and associated anion order lead to exceptional ionic and electronic transport properties and surface reactivity in AA’B2O5+x perovskites. A variety of compounds were studied by X-ray and neutron diffraction, measurements of thermodynamics and transport and theoretically. These included PrBaCo 2 O 5+x and NdBaCo 2 O 5+x , PrBaCo 2-x FexO 6- δ (x = 0, 0.5, 1.0, 1.5 and 2) and LnBaCoFeO 6- δ (Ln = La, Pr, Nd, Sm, Eu and Gd), Sr 3 YCo 4 O 10.5 , YBaMn 2 O 5+x . A 0.5 A’ 0.5 BO 3 (where A=Y, Sc, La, Ce, Pr, Nd, Pm, Sm; A’= Sr, Ba; and B= Fe, Co, Mn, Ni), Ba 2 In 2 O 5 , and La 1 x Sr x CoO 3-δ /(La 1-y Sry) 2 CoO 4±δ interfaces.

36 MATERIALS SCIENCE↗

Complex magnetic order in the decorated spin-chain system Rb 2 Mn 3 ( MoO 4 ) 3 ( OH ) 2

The macroscopic magnetic properties and microscopic magnetic structure of Rb 2 Mn 3 (MoO 4 ) 3 (OH) 2 (space group Pn ma) are investigated by magnetization, heat capacity, and single-crystal neutron diffraction measurements. The compound's crystal structure contains bond-alternating [Mn 3 O 11 ] ∞ chains along the b axis, formed by isosceles triangles of Mn ions occupying two crystallographically nonequivalent sites (the Mn1 site on the base and Mn2 site on the vertex). These chains are only weakly linked to each other by nonmagnetic oxyanions. Both superconducting quantum interference device magnetometry and neutron diffraction experiments show two successive magnetic transitions as a function of temperature. On cooling, it transitions from a paramagnetic phase into an incommensurate phase below 4.5 K with a magnetic wave vector near k 1 = ( 0 , 0.46 , 0 ). An additional commensurate antiferromagnetically ordered component arises with k 2 = ( 0, 0, 0), forming a complex magnetic structure below 3.5 K with two different propagation vectors of different stars. On further cooling, the incommensurate wave vector undergoes a lock-in transition below 2.3 K. The experimental results suggest that the magnetic superspace group is Pnma. 1' (0b0) s0ss for the single- k incommensurate phase and is Pn' m a ( 0 b 0 ) 00 s for the two- k magnetic phase. We propose a simplified magnetic structure model taking into account the major ordered contributions, where the commensurate k 2 defines the ordering of the c-axis component of the Mn1 magnetic moment, while the incommensurate k 1 describes the ordering of the ab -plane components of both Mn1 and Mn2 moments into elliptical cycloids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-field spin-flop state in green dioptase

The high-field magnetic properties and magnetic order of the gem mineral green dioptase Cu 6 [Si 6 O 18 ] .6 H 2 O have been studied by means of single-crystal neutron diffraction in magnetic fields up to 21 T and magnetization measurements up to 30 T. In zero field, the Cu 2+ moments in the antiferromagnetic chains are oriented along the c axis with a small off-axis tilt. For a field applied parallel to the c axis, the magnetization shows a spin-flop-like transition at B*=12.2 T at 1.5 K. Neutron diffraction experiments show a smooth behavior in the intensities of the magnetic reflections without any change in the periodicity of the magnetic structure. Bulk and microscopic observations are well described by a model of ferromagnetically coupled antiferromagnetic X X Z spin-$\frac{1}{2}$ chains, taking into account a change of the local easy-axis direction. We demonstrate that the magnetic structure evolves smoothly from a deformed Néel state at low fields to a deformed spin-flop state in a high field via a strong crossover around B*. The results are generalized for different values of interchain coupling and spin anisotropy.

36 MATERIALS SCIENCE↗

Short-Range Magnetic Correlations and Parimagnetism in RCo 2

X-ray circular magnetic dichroism, polarized neutron diffraction, ac susceptibility, and Seebeck effect have been measured for several members of the RCo 2 series (R=Ho, Tm, Er) as a function of temperature and applied magnetic field. The experimental results show robust parimagnetism (a general behaviour along the RCo 2 series with R being a heavy rare earth ion) and two reversal temperatures in some systems, which is an unexpected result. Polarised neutron diffraction show differences between results obtained on single crystals or polycrystalline ingots. We propose an interpretation of parimagnetic RCo 2 as a Griffiths phase of the high temperature, magnetically ordered, amorphous RCo 2 phase. Copyright EDP Sciences, SIF, Springer-Verlag Berlin Heidelberg 2013

36 MATERIALS SCIENCE↗

Crystallographic and electronic evolution of lanthanum strontium ferrite (La 0.6 Sr 0.4 FeO 3-δ ) thin film and bulk model systems during iron exsolution

In this work, we study the changes in the crystallographic phases and in the chemical states during the iron exsolution process of lanthanum strontium ferrite (LSF, La 0.6 Sr 0.4 FeO 3-δ ). By using thin films of orthorhombic LSF, grown epitaxially on NaCl(001) and rhombohedral LSF powder, the materials gap is bridged. Furthermore, the orthorhombic material transforms into a fluorite structure after the exsolution has begun, which further hinders this process. Additionally, for the powder material, by a combination of in situ core level spectroscopy and ex situ neutron diffraction, we could directly highlight differences in the Fe chemical nature between surface and bulk: whereas the bulk contains Fe(IV) in the fully oxidized state, the surface spectra can be described perfectly by the sole presence of Fe(III). We also present corresponding magnetic and oxygen vacancy concentration data of reduced rhombohedral LSF that did not undergo a phase transformation to the cubic perovskite system based on neutron diffraction data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous Ferromagnetic Behavior in Orthorhombic Li 3 Co 2 SbO 6

Monoclinic Li 3 Co 2 SbO 6 has been proposed as a Kitaev spin liquid candidate and investigated intensively, whereas the properties of its polymorph, the orthorhombic phase, are less known. In this work, we report the magnetic properties of orthorhombic Li 3 Co 2 SbO 6 as revealed by dc and ac magnetic susceptibility, muon spin relaxation (μSR), and neutron diffraction measurements. Successive magnetic transitions at 115, 89, and 71 K were observed in the low-field dc susceptibility measurements. The transitions below T N (115 K) are suppressed at higher applied fields. However, zero-field ac susceptibility measurements reveal distinct frequency-independent transitions at about 114, 107, 97, 79, and 71 K. A long-range magnetic ordered state was confirmed by specific heat, μSR, and neutron diffraction measurements, all indicating a single transition at about 115 K. The discrepancy between different measurements is attributed to possible stacking faults and/or local disorders of the ferromagnetic zigzag chains, resulting in ferromagnetic boundaries within the overall antiferromagnetic matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical properties of intergrowth compound Eu 2 CuZn 2 P 3

Here, the physical properties of single-crystalline Eu 2 ⁢CuZn 2 ⁢P 3 were inspected via thermodynamic, transport, and neutron diffraction measurements. Eu 2 ⁢ CuZn 2⁢ P 3 is composed of EuCuP and EuZn 2 ⁢ P 2 motifs stacked in a one-to-one ratio. The magnetic response of Eu 2 ⁢ CuZn 2 ⁢ P 3 is similar to that of EuZn 2 ⁢ P 2 in its A-type antiferromagnetic (semiconducting) state. A Néel temperature of T N = 40.3K is obtained from the specific heat capacity. Single-crystal neutron diffraction reveals a (001) magnetic propagation vector, with primarily in-plane moments coupled along [001] in an up-up-down-down pattern. This spin structure retains the ferromagnetic EuCuP motifs and antiferromagnetic coupling across the EuZn 2 ⁢P 2 motifs. The electrical resistivity is characterized by metallic behavior above 100 K, an increase in ρ upon cooling below ≈ 75K, and a large negative magnetoresistance below T N . First principles calculations evidence a narrow band gap for antiferromagnetic ordering and semimetallic behavior for the ferromagnetic state. This is consistent with the observed effect of magnetic field on the electrical resistivity. Hall effect measurements reveal a field-induced, negative anomalous Hall effect that increases on cooling down to 2 K. Also, an unconventional contribution to the Hall effect dominates the low-field Hall signal, particularly near T N , and is similar in appearance to a topological Hall effect. However, further work is necessary to understand if any of the transport properties have topological origins or if magnetism-induced modifications to the Fermi surface induce these unusual Hall effect signals in this and related materials.

36 MATERIALS SCIENCE↗

The “good,” the “bad,” and the “hidden” in neutron scattering and molecular dynamics of ionic aqueous solutions

We characterize a concentrated 7.3 m CaCl 2 solution, combining neutron diffraction with chloride isotopic substitution (Cl-NDIS) in null water and molecular dynamics (MD) simulations. We elucidate the solution structure, thermodynamic properties, and extent of ion pairing previously suggested as concentration-dependent and often not observed at lower concentrations. Our Cl-NDIS measurements designate the solvent-shared ion pairing as dominant and the contact ion pairing (CIP) as insignificant even under conditions close to the solubility limit. The MD models parameterized against neutron diffraction with calcium isotopic substitution (Ca-NDIS) overestimate CIP despite successfully reproducing most of the Cl-NDIS signal. This drawback originates from the fact that Ca 2+ –Cl - interactions were primarily “hidden” in the Ca-NDIS signal due to overlapping with Ca 2+ –O w and Ca 2+ –H w contributions to the total scattering. Contrary, MD models with moderate CIP and possessing generally good performance at high concentrations fail to reproduce the NDIS measurements accurately. Therefore, the electronic polarization, introduced in most of the recent MD models via scaling ionic charges, resolves some but not all parameterization drawbacks. We conclude that despite improving the quality of MD models “on average,” the question “which model is the best” has not been answered but replaced by the question “which model is better for a given research.” An overall “good” model can still be inappropriate or, in some instances, “bad” and, unfortunately, produce erroneous results. Additionally, the accurate interpretation of several NDIS datasets, complemented by MD simulations, can prevent such mistakes and help identify the strengths, weaknesses, and convenient applications for corresponding computational models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unusual Phase Transitions and Magnetoelastic Coupling in TlFe1.6Se2

Structural, magnetic, electrical transport, and heat capacity data are reported for single crystals of TlFe{sub 1.6}Se{sub 2}. This compound crystallizes in a tetragonal structure similar to the ThCr{sub 2}Si{sub 2} structure, but with vacancies in the Fe layer. The vacancies can be ordered or disordered depending on temperature and thermal history. If the vacancies are ordered, the basal plane lattice constant increases from a to {radical}5a. Antiferromagnetic order with the Fe spins along the c axis occurs below T{sub N} {approx} 430 K, as shown by single-crystal neutron diffraction, and the magnetic structure is reported. In addition, for the vacancy-ordered crystal, two other phase transitions are found at T{sub 1} {approx} 140 K and T{sub 2} {approx} 100 K. The phase transitions at T{sub 1} and T{sub 2} are evident in heat capacity, magnetic susceptibility, resistivity data, a and c lattice parameters, and the unusual temperature dependence of the magnetic order parameter determined from neutron scattering. The phase transitions at T{sub 1} and T{sub 2} result in significant changes in the magnetic moment per iron, with 1.72(6) {micro}B observed at 300 K, 2.07(9) {micro}B at 140 K, 1.90(9) {micro}B at 115 K, and 1.31(8) {micro}B for 5 K if the same 'block checkerboard' magnetic structure is used at all temperatures. The phase transitions appear to be driven by small changes in the c lattice constant, large magnetoelastic coupling, and the localization of carriers with decreasing temperature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Protonation states of histidine and other key residues in deoxy normal human adult hemoglobin by neutron protein crystallography

Using neutron diffraction analysis, the protonation states of 35 of 38 histidine residues were determined for the deoxy form of normal human adult hemoglobin. Distal and buried histidines may contribute to the increased affinity of the deoxy state for hydrogen ions and its decreased affinity for oxygen compared with the oxygenated form. The protonation states of the histidine residues key to the function of deoxy (T-state) human hemoglobin have been investigated using neutron protein crystallography. These residues can reversibly bind protons, thereby regulating the oxygen affinity of hemoglobin. By examining the OMIT F{sub o} − F{sub c} and 2F{sub o} − F{sub c} neutron scattering maps, the protonation states of 35 of the 38 His residues were directly determined. The remaining three residues were found to be disordered. Surprisingly, seven pairs of His residues from equivalent α or β chains, αHis20, αHis50, αHis58, αHis89, βHis63, βHis143 and βHis146, have different protonation states. The protonation of distal His residues in the α{sub 1}β{sub 1} heterodimer and the protonation of αHis103 in both subunits demonstrates that these residues may participate in buffering hydrogen ions and may influence the oxygen binding. The observed protonation states of His residues are compared with their ΔpK{sub a} between the deoxy and oxy states. Examination of inter-subunit interfaces provided evidence for interactions that are essential for the stability of the deoxy tertiary structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In Situ Study of the Stress Relaxation During Aging of Nickel-Base Superalloy Forgings

Nickel-base superalloys are conventionally aged in order to develop a favorable microstructure as well as to relieve residual stresses. In this work, neutron diffraction was used to follow the evolution of residual stress during aging in Inconel 718 and Udimet 720LI for the first time by a combination of in situ and ex situ measurements. First, the quench-induced stress profiles were determined for different geometries of Inconel 718 forgings confirming that the amplitude of stress is not significantly affected by the thickness of the component. It was followed by in situ residual stress analysis using neutron diffraction during aging/annealing treatments at 650 °C, 720 °C, and 750 °C. Almost 90 pct of stress relaxation was found to occur primarily during heating to the aging temperature as a result of a combination of plasticity and early-stage creep relaxation. Creep-like stress relaxation was observed to evolve at a diminishing rate during the isothermal treatment of Inconel 718 at 720 °C and 750 °C, while no further stress relaxation occurred at 650 °C. This means that a change in hold temperature might have a more immediate impact on stress relaxation than a change in duration of heat treatment. Finally, the post-aging ex situ measurements showed that a heat treatment at 750 °C for 8 hours reduced the stresses by approximately 70 pct in Inconel 718. By comparison, when heat treating Udimet 720LI in the same way only a 20 pct stress reduction was observed, which is explained by the higher creep resistance of this alloy.

36 MATERIALS SCIENCE↗

Hole doping and antiferromagnetic correlations above the Néel temperature of the topological semimetal (Sr 1-x K x )MnSb 2

Neutron diffraction and magnetic susceptibility studies of orthorhombic single crystal (Sr 0.97 K 0.03 )MnSb 2 confirm the three-dimensional (3D) C-type antiferromagnetic (AFM) ordering of the Mn 2+ moments at TN=305±3 K, which is slightly higher than that of the parent SrMnSb 2 with T N =297±3 K. Susceptibility measurements of the K-doped and parent crystals above T N are characteristic of 2D AFM systems. This is consistent with high-temperature neutron diffraction of the parent compound that displays persisting 2D AFM correlations well above T N to at least ~560 K with no evidence of a ferromagnetic phase. Analysis of the de Haas–van Alphen magnetic oscillations of the K-doped crystal is consistent with hole doping.

36 MATERIALS SCIENCE↗

Mechanical characterization of an additively manufactured Inconel 718 theta-shaped specimen

Two sets of “theta”-shaped specimens were additively manufactured with Inconel 718 powders using an electron beam melting technique with two distinct scan strategies. Light optical microscopy, mechanical testing coupled with a digital image correlation (DIC) technique, finite element modeling, and neutron diffraction with in situ loading characterizations were conducted. The cross-members of the specimens were the focus. Light optical micrographs revealed that different microstructures were formed with different scan strategies. Ex situ mechanical testing revealed each build to be stable under load until ductility was observed on the cross-members before failure. The elastic moduli were determined by forming a correlation between the elastic tensile stresses determined from FEM, and the elastic strains obtained from DIC. The lattice strains were mapped with neutron diffraction during in situ elastic loading; and a good correlation between the average axial lattice strains on the cross-member and those determined from the DIC analysis was found. Lastly, the spatially resolved stresses in the elastic deformation regime are derived from the lattice strains and increased with applied load, showing a consistent distribution along the cross-member.

36 MATERIALS SCIENCE↗

Successive magnetic orderings in the Ising spin chain magnet DyNi 5 Ge 3

In this report, we investigated a new rare-earth-based one-dimensional Ising spin chain magnet DyNi 5 Ge 3 by means of magnetization, specific heat, and powder neutron diffraction measurements. Due to the crystalline electrical field splitting, the magnetic Dy ions share an Ising-like ground doublet state. Owning to the local point symmetry, these Ising moments form into two canted magnetic sublattices, which were further confirmed by the angle-dependent magnetization measurement. In zero fields, two successive antiferromagnetic phase transitions were found at temperatures T N1 =6K and T N2 =5K, respectively. Only part of the moments are statically ordered in this intermediate state between T N1 and T N2 . Powder neutron diffraction experiments at different temperatures were performed as well. Further, an incommensurate magnetic propagation vector of k m =(0.5,0.4,0.5) was identified. The refined spin configurations through the irreducible representation analysis confirmed that these Ising spins are canted in the crystal ab plane.

36 MATERIALS SCIENCE↗

First in-situ lattice strains measurements under load at VULCAN

The engineering materials diffractometer, VULCAN, at the Spallation Neutron Source began commissioning on June 26, 2009. This instrument is designed for materials science and engineering studies. In situ lattice strain measurements of a model metallic material under monotonic tensile load have been performed on VULCAN. The tensile load was applied under two different strain rates, and neutron diffraction measurements were carried out in both high-intensity and high-resolution modes. These experiments demonstrated VULCAN's in situ study capability of deformation behaviors even during the early phases of commissioning.

43 PARTICLE ACCELERATORS↗