SEARCH · Engineering Papers

Results for “Morphological”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Surfactant Engineering and Its Role in Determining the Performance of Nanoparticulate Organic Photovoltaic Devices

The fabrication of organic photovoltaics (OPVs) from non-hazardous nanoparticulate (NP) inks offers considerable promise for the development of ecofriendly large-scale printed solar modules. However, the typical NP core-shell morphology (driven by the different donor/acceptor affinities for the surfactant used in NP synthesis) currently hinders the photovoltaic performance. As such, surfactant engineering offers an elegant approach to synthesizing a more optimal intermixed NP morphology and hence an improved photovoltaic performance. In this work, the morphology of conventional sodium dodecyl sulfate (SDS) and 2-(3-thienyl) ethyloxybutylsulfonate (TEBS)-stabilized poly(3-hexylthiophene) (P3HT) donor:phenyl-C 61 -butyric acid methyl ester (PC 61 BM) acceptor NPs is probed using scanning transmission X-ray microscopy, UV-vis spectroscopy, grazing-incidence X-ray diffraction, and scanning electron microscopy. While the SDS-stabilized NPs exhibit a size-independent core-shell morphology, this work reveals that TEBS-stabilized NPs deliver an intermixed morphology, the extent of which depends on the particle size. Consequently, by optimizing the TEBS-stabilized NP size and distribution, NP-OPV devices with a power conversion efficiency that is ~50% higher on average than that of the corresponding SDS-based NP-OPV devices are produced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Three-dimensional imaging of mitochondrial cristae complexity using cryo-soft X-ray tomography

Mitochondria are dynamic organelles that change morphology to adapt to cellular energetic demands under both physiological and stress conditions. Cardiomyopathies and neuronal disorders are associated with structure-related dysfunction in mitochondria, but three-dimensional characterizations of the organelles are still lacking. In this study, we combined high-resolution imaging and 3D electron density information provided by cryo-soft X-ray tomography to characterize mitochondria cristae morphology isolated from murine. Using the linear attenuation coefficient, the mitochondria were identified (0.247 ± 0.04 µm -1 ) presenting average dimensions of 0.90 ± 0.20 µm in length and 0.63 ± 0.12 µm in width. The internal mitochondria structure was successfully identified by reaching up the limit of spatial resolution of 35 nm. The internal mitochondrial membranes invagination (cristae) complexity was calculated by the mitochondrial complexity index (MCI) providing quantitative and morphological information of mitochondria larger than 0.90 mm in length. The segmentation to visualize the cristae invaginations into the mitochondrial matrix was possible in mitochondria with MCI ≥ 7. Altogether, we demonstrated that the MCI is a valuable quantitative morphological parameter to evaluate cristae modelling and can be applied to compare healthy and disease state associated to mitochondria morphology.

3-D reconstruction↗

DOE OSTI2021

Size, shade, or shape? The contribution of galaxies of different types to the star formation history of the Universe from SDSS-IV MaNGA

ABSTRACT By fitting stellar populations to the fourth generation of the Sloan Digital Sky Survey (SDSS-IV) Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey observations of ∼7000 suitably weighted individual galaxies, we reconstruct the star formation history of the Universe, which we find to be in reasonable agreement with previous studies. Dividing the galaxies by their present-day stellar mass, we demonstrate the downsizing phenomenon, whereby the more massive galaxies hosted the most star formation at earlier times. Further dividing the galaxy sample by colour and morphology, we find that a galaxy’s present-day colour tells us more about its historical contribution to the cosmic star formation history than its current morphology. We show that downsizing effects are greatest among galaxies currently in the blue cloud, but that the level of downsizing in galaxies of different morphologies depends quite sensitively on the morphological classification used, due largely to the difficulty in classifying the smaller low-mass galaxies from their ground-based images. Nevertheless, we find agreement that among galaxies with stellar masses $M_{\star } \gt 6\times 10^{9}\, \mathrm{ M}_{\odot }$, downsizing is most significant in spirals. However, there are complicating factors. For example, for more massive galaxies, we find that colour and morphology are predictors of the past star formation over a longer time-scale than in less massive systems. Presumably this effect is reflecting the longer period of evolution required to alter these larger galaxies’ physical properties, but shows that conclusions based on any single property do not tell the full story.

Peterken, Thomas↗

DOE OSTI2020

Effect of transport mechanism on the coarsening of bicontinuous structures: A comparison between bulk and surface diffusion

Here, coarsening of bicontinuous microstructures is observed in a variety of systems, such as nanoporous metals and mixtures that have undergone spinodal decomposition. To better understand the morphological evolution of these structures during coarsening, we compare the morphologies resulting from two different coarsening mechanisms, surface and bulk diffusion. We perform phase-field simulations of coarsening via each mechanism in a two-phase mixture at nominal volume fractions of 50%-50% and 36%-64%, and the simulated structures are characterized in terms of topology (genus density), the interfacial shape distribution, structure factor, and autocorrelations of phase and mean curvature. We observe self-similar evolution of morphology and topology and agreement with the expected power laws for dynamic scaling, in which the characteristic length scale increases over time proportionally to t 1/4 for surface diffusion and t 1/3 for bulk diffusion. While we observe the expected difference in the coarsening kinetics, we find that differences in self-similar morphology due to coarsening mechanism are relatively small, although typically they are larger at 36% volume fraction than at 50% volume fraction. In particular, we find that bicontinuous structures coarsened via surface diffusion have lower scaled genus densities than structures coarsened via bulk diffusion. We also compare the self-similar morphologies to those in literature and to two model bicontinuous structures, namely, constant-mean-curvature surfaces based on the Schoen G minimal surface and random leveled-wave structures. The average scaled mean curvatures of these model structures agree reasonably with those of the coarsened structures at both 36% and 50%, but we find substantial disagreements in the scaled genus densities and the standard deviations of mean curvature.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Acquisitive root exploration strategies help maintain higher peak sap flux rates during summer drought, but more root biomass does not

Roots are responsible for soil water uptake, yet little is known about how variation in fine-root traits relates to whole-tree water movement, particularly during periods of drought. By combining a 3-yr dataset monitoring sap flow rates with measures of fine-root biomass, length, and morphology across 10 tree species, we addressed hypotheses concerning the role of fine-root system size and morphology in determining tree responses to summer drought as well as potential changes in their relative importance under more severe droughts. Greater fine-root biomass and length did not enable trees to maintain high rates of sap flow during drought, whereas the morphological traits, specific root length and specific root area, were linked to sustained sap flow rates during drought. We found that all species, irrespective of root traits, progressively reduced their sap flow under more extreme drought conditions, although more acquisitive root morphology was still associated with smaller reductions. Our results run counter to long-standing assumptions that larger root systems are better able to access soil water and maintain photosynthetic activity during drought. Instead, we find evidence that root morphology at least partially determines the capacity for water uptake and movement as soil moisture declines.

drought↗

DOE OSTI2020

AGR-3/4 TRISO Fuel Compact Ceramography

The combined third and fourth irradiation in the Advanced Gas Reactor (AGR) program (AGR-3/4) contained tristructural isotropic (TRISO)-coated particle fuel and designed-to-fail (DTF) fuel particles. The DTF particles were only coated with highly anisotropic pyrocarbon (PyC) so they would purposely fail during the AGR-3/4 irradiation and provide a source of fission products for measurement. To observe the post-irradiation morphology of these DTF particles and the TRISO-coated particles, three AGR-3/4 compacts were mounted in epoxy, sectioned above their centerlines, and ground/polished. Three rounds of grinding/polishing and optical microscopy were performed so that the particles could be observed at multiple planes. Each compact contained approximately 1,872 TRISO particles and exactly 20 DTF particles. The three AGR-3/4 compacts examined covered a wide temperature range and featured both the hottest average irradiation temperature (1375°C) and the coldest/lowest burnup (872°C and 5.5% fissions per initial metal atom) of any compacts to undergo post-irradiation examination (PIE) in the AGR program to date. A total of 29 DTF particles were located and observed via microscopy across the three compacts. All the DTF particles observed via microscopy had completely failed PyC coatings. Some different DTF kernel and PyC morphologies were observed that have been attributed to the differences in irradiation temperature and/or burnup. At low and medium irradiation temperatures (roughly 850 to 1050°C), it appears irradiation-induced dimensional changes in the DTF PyC caused it to fracture and fold in on itself, and the kernel deformed to accommodate this PyC deformation. The extent of DTF kernel deformation to accommodate DTF PyC buckling tended to be greater for the medium-temperature fuel compared to the cold fuel. In the high-irradiation-temperature compact (1375°C), the DTF PyC layer appears to have completely reacted chemically with the kernel material. The only material surrounding the DTF particles in this hot compact resembles the compact matrix material. Observations of the TRISO-coated driver fuel particles and fuel compact graphitic matrix were also made. The TRISO particle kernels in the medium-temperature compact (1047°C), and many in the high-temperature compact (1375°C), showed morphologies consistent with what was seen in AGR-1 and AGR-2. In other TRISO particles from the high-temperature compact, a spatial gradient in the kernel appearance was evident. Here the cool side of the kernel (away from the center of the compact) had a much darker appearance (like that of the buffer and pyrocarbon). This is the first observation of this kind of kernel spatial gradient in AGR fuel. It is believed that the high irradiation temperature of that compact (an average of 1375°C) activates or accelerates an unidentified chemical reaction, and the temperature gradient within the fuel causes a sharp spatial gradient. The low-temperature/low-burnup compact also showed unique kernel morphologies where the TRISO-coated particles had clearly distinguishable oxide and carbide phases at the center of the kernel, an oxide rind surrounding this, and remnants of a carbide skin surrounding the oxide rind. These are features observed in the as-fabricated fuel that are no longer present in higher burnup fuel. Occasional gaps between the outer pyrolytic carbon (OPyC) and graphitic matrix material were observed in all compacts. Gaps were most often found in the small, matrix-filled spaces between adjacent particles. Finally, buffer morphologies in AGR-3/4 TRISO particles were like those observed in AGR-1 and AGR-2, and the buffer fracture frequencies in AGR-3/4 and AGR-2 TRISO particles were plotted versus fast neutron fluence and irradiation temperature. In AGR-3/4 the buffer fracture rate was highest (23%) for an irradiation temperature of 1047°C and a fast fluence of 5.18E25 n/m 2 . Increasing the irradiation temperature to 1375°C reduced the buffer fracture rate to 14%. Reducing the irradiation temperature to 872°C and the fast fluence by a factor of 3 reduced the buffer fracture rate to 7%. The temperature and fluence dependencies observed for AGR-3/4 buffer fracture were consistent with those observed in AGR-2. Lower fluences and/or higher temperatures significantly reduced the buffer fracture frequencies. Lower buffer fracture frequencies were also observed at lower temperatures as long as the fluence was also significantly reduced. This is believed to be due to lower fluence resulting in less irradiation-induced dimensional change (shrinkage) of the buffer, and a higher temperature promoting enhanced creep relaxation of stresses within the buffer, leading to less buffer fracture.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Fluoropolymer Aging Phenomena

This project aims to investigate structural and morphological changes in fluoropolymers induced by both processing and aging phenomena such as heat, time, and irradiation. Fluoropolymers are an important class of thermoplastics that are broadly used in industry as o-rings and seals when chemical resistance and thermal performance are important. They are also often used in thin film geometries as binders in batteries, insulation layers, water barriers, and anti-fouling coatings. For all of these applications, mechanical integrity and aging are important aspects of their use. Changes in the crystalline morphology are known to impact the mechanical properties of the polymer and can lead to failure. The broad goals of this project are to correlate compositional changes, morphological changes, and mechanical changes. report focuses on the morphological changes that are correlated with nuclear magnetic resonance (NMR), calorimetry and mechanical testing. We plan to compare structure and morphology measurements across complementary bulk and surface techniques. We use in situ atomic force microscopy (AFM) to measure domain shape and crystallization kinetics; in situ NMR to measure crystalline composition; and differential scanning calorimetry (DSC) to measure melting temperatures.

36 MATERIALS SCIENCE↗

DOE OSTI2022

The Impacts of Single-Scattering and Microphysical Properties of Ice Particles Smaller Than 100 µm on the Bulk Radiative Properties of Tropical Cirrus

There are large uncertainties in the single-scattering (i.e., morphologies) and microphysical (i.e., concentrations) properties of ice particles whose size are less than ~100 µm. Insufficient resolutions of the most advanced cloud probes (e.g., cloud particle imager) cannot resolve the micrometer-scale morphologies of small ice particles. Further, the shattering of large ice particles on probes’ inlets or tips causes uncertainties in the measurement of the concentrations of small ice particles. These uncertainties have large impacts on the single-scattering and microphysical properties of small ice particles that are utilized to quantify the bulk radiative properties of cirrus. In this study, the impacts of uncertainties in the morphologies and concentrations of small ice particles on the bulk radiative properties of tropical cirrus were calculated using measurements acquired during the Tropical Warm Pool-International Cloud Experiment. Five different models (i.e., budding Buckyball, Chebyshev particle, droxtal, Gaussian random sphere, and sphere) that represent the shapes of small ice particles were used to calculate the single-scattering properties. The bulk radiative properties, average phase-function ($\overline{P_{11}}$), and average asymmetry parameter ($\overline{g}$) were computed by combining the measured size/habit distributions and the calculated single-scattering properties of ice particles. The impacts of the selection of varying morphologies of small particles on the bulk radiative properties were quantified. For these calculations, the possible range of the concentrations of small ice particles which depend on the degree of shattered large particles were also used. The impacts of varying the single-scattering properties of small ice particles on the bulk radiative properties were the largest in the upper parts of cirrus (T < –60 °C), while they were the smallest in the lower parts of cirrus (–45 < T < –30 °C). The impacts of uncertainties in the concentrations of small ice particles on the bulk radiative properties were largest in the lower parts of cirrus (–45 < T < –30 °C), whereas they were smallest in the upper parts of cirrus (T < –60 °C). The effect of shattering was maximum in the lower parts of cirrus, whilst it was minimum in the upper parts of cirrus. The combined impacts of uncertainties in the single-scattering (i.e., morphologies) and microphysical (i.e., concentrations) properties of small ice particles revealed variations of up to 11.2% (127.1%; 67.3%) of the integrated intensity in the forward (sideward; backward) angles in $\overline{P_{11}}$ and a corresponding change in $\overline{g}$ by up to 12.61%.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Effect of Silica and Mixing Time on Microstructures of Porous Polymer Composite by Emulsion Templating

Porous polymer composite with tailored porosity is applied in the myriads of areas such as energy storage, oil/water absorption, bioengineering, and advanced areas of material science. The emulsion templating technology is one of the most popular methods for synthesizing porous polymer composite. It involves solidifying a two-phase mixture of porogen and polymer, then removing porogen to create pores within the continuous emulsion phase by polymerization or curing. The surfactant plays a pivotal role in accomplishing a stable emulsion, a key factor in designing the internal porous structure. This study highlights the effect of silica filler and mixing time on pore morphology, i.e., shape, size, and distribution. on polydimethylsiloxane (PDMS) porous structure utilizing the water-in-oil emulsion templating method. Span® 80 is used as a surfactant to reduce the surface tension between water, silica, and PDMS and simultaneously create a strong foaming effect. Different weight concentrations of silica (1-10 wt%) were chosen while keeping the internal phase, i.e., water (50 wt%) constant. The designed porous structures were further characterized through scanning electron microscopy (SEM). Porous composite specimens fabricated with higher silica content and mixing time consistently exhibit smaller pore sizes than specimens fabricated with lower mixing time and silica content. A breakthrough of pore morphology is seen at silica content higher than 5wt% at 1 min mixing, however, pore morphology drastically changes when mixing time increases from 1 min to 6 min. Variation of finer mixing time beyond 1 min shows stepwise changes in pore morphology from a large single-phase porous structure to a bi-modal porous structure which eventually become a smaller single-mode porous structure. Thus, the emulsion templating technique, in combination with different filler content and mixing time, will effectively aid in designing engineered porous polymer composite with varying stiffness and pore morphology.

Porous polymer, Emulsion templating, Surfactant, P↗

DOE OSTI2024

Method of tuning physical properties of thermosets

Polymerization-induced phase separation enables fine control over thermoset network morphologies, yielding heterogeneous structures with domain sizes tunable over 1-100 nm. However, the controlled chain-growth polymerization techniques exclusively employed to regulate morphology at these length scales are unsuitable for most thermoset materials typically formed through step-growth mechanisms. By employing binary mixtures in place of the classic constituents of phase-separating thermosets—resin, curing agent, and secondary polymer—facile tunability over morphology can be achieved through a single compositional parameter. Indeed, this method yields morphologies spanning nano-scale to macro-scale, controlled by the relative reactivities and thermodynamic compatibility of the network components. Due to the connection between chain dynamics and microstructure in these materials, the tunable morphology enables exquisite control over glass transition and other physical and mechanical properties.

Jones, Brad Howard↗

DOE OSTI2020

A Cast Net Thrown onto an Interface: Wrapping 3D Objects with an Interfacially Jammed Amphiphilic Sheet

Wrapping a 3D object with a 2D sheet is not uncommon, but the wrapping behavior becomes complex and interesting when the sheet is bestowed with strong interfacial activities. Amphiphilic lignin macromolecules, isolated from biomass, form a scalable thin surfactant sheet at an oil/water interface through the interfacial jamming process. The process marks three distinct stages of interfacial behavior: a) diffusive assembly, b) viscous assembly with retarded mobility, and c) flexible yet irreversibly jammed rigid sheets. The surfactant sheet wraps, traps, and promptly stabilizes both oil and water droplets in nonequilibrium morphologies upon environmental stimulus. Finally, beyond preserving exotic morphologies, the highly interfacially active surfactant sheet also participates in morphology evolution by creating a vanishing interfacial tension and driving interfacial instability around the wrapped content, leading to novel morphologies as well as many potential applications.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Baseplate Temperature–Dependent Vertical Composition Gradient in Pseudo–Bilayer Films for Printing Non–Fullerene Organic Solar Cells

Numerous previous reports on the sequential deposition (SD) technique have demonstrated that this approach can achieve a p–i–n active layer architecture with an ideal vertical composition gradient, which is one of the critical factors that can influence the physical processes that determine the photovoltaic performance of organic solar cells. Herein, a commonly used photovoltaic system comprised of PM6 as a donor and Y6 as an acceptor is investigated with respect to sequential blade–processing deposition to comprehensively explore the morphology characteristics as a function of baseplate temperature. A systematic study of the temperature–dependent blend morphology elucidates the SD–processed configuration merits and device physics behind temperature–controlled degree of vertical composition gradient, and constructs the temperature–microstructure–property relationship for the corresponding photovoltaic parameters. The result shows, as the temperature increases, the morphology of the active layer has undergone a distinct evolution from the pseudo–bulk heterojunction to a pseudo–planar heterojunction and then to a pseudo–planar bilayer, leading to a non–monotonic correlation between baseplate temperature and device performance. Further, this investigation not only reveals the importance of precisely controlling baseplate temperature for gaining vertical morphology control, but also provides a path toward rational optimization of device performance in the lab–to–fab transition.

14 SOLAR ENERGY↗

DOE OSTI2022

Twisted A-D-A Type Acceptors with Thermally-Activated Delayed Crystallization Behavior for Efficient Nonfullerene Organic Solar Cells

We report that molecular aggregation and crystallization during film coating play a crucial role in the realization of high-performing organic photovoltaics. Strong intermolecular interactions and high solid-state crystallinity are beneficial for charge transport. However, fast crystallization during thin-film drying often limits the formation of the finely phase-separated morphology required for efficient charge generation. Herein, the authors show that twisted acceptor-donor-acceptor (A-D-A) type compounds, containing an indacenodithiophene (IDT) electron-rich core and two naphthalenediimide (NDI) electron-poor units, leads to formation of mostly amorphous phases in the as-cast film, which can be readily converted into more crystalline domains by means of thermal annealing. This design strategy solves the aforementioned conundrum, leading to an optimal morphology in terms of reduced donor/acceptor domain-separation sizes (ca. 13 nm) and increased packing order. Solar cells based on these acceptors with a PBDB-T polymer donor show a power conversion efficiency over 10% and stable morphology, which results from the combined properties of desirable excited-state dynamics, high charge mobility, and optimal aggregation/crystallization characteristics. These results demonstrate that the twisted A-D-A motif featuring thermally-induced crystallization behavior is indeed a promising alternative design approach toward more morphologically robust materials for efficient organic photovoltaics.

14 SOLAR ENERGY↗

DOE OSTI2023

Anatomy of an agricultural antagonist: Feeding complex structure and function of three xylem sap‐feeding insects illuminated with synchrotron‐based 3D imaging

Abstract Many insects feed on xylem or phloem sap of vascular plants. Although physical damage to the plant is minimal, the process of insect feeding can transmit lethal viruses and bacterial pathogens. Disparities between insect‐mediated pathogen transmission efficiency have been identified among xylem sap‐feeding insects; however, the mechanistic drivers of these trends are unclear. Identifying and understanding the structural factors and associated integrated functional components that may ultimately determine these disparities are critical for managing plant diseases. Here, we applied synchrotron‐based X‐ray microcomputed tomography to digitally reconstruct the morphology of three xylem sap‐feeding insect vectors of plant pathogens: Graphocephala atropunctata (blue‐green sharpshooter; Hemiptera, Cicadellidae) and Homalodisca vitripennis (glassy‐winged sharpshooter; Hemiptera, Cicadellidae), and the spittlebug Philaenus spumarius (meadow spittlebug; Hemiptera, Aphrophoridae). The application of this technique revealed previously undescribed anatomical features of these organisms, such as key components of the salivary complex. The visualization of the 3D structure of the precibarial valve led to new insights into the mechanism of how this structure functions. Morphological disparities with functional implications between taxa were highlighted as well, including the morphology and volume of the cibarial dilator musculature responsible for extracting xylem sap, which has implications for force application capabilities. These morphological insights will be used to target analyses illuminating functional differences in feeding behavior.

3D imaging↗

DOE OSTI2025

Holistic Microstructure Control Strategies in Photopolymerization‐Induced Phase Separation of Acrylate Systems

Open porous materials, known for their large surface area and interconnected structures, are essential in various applications, including batteries, ion exchange, catalysis, filtration, and electronic waste recycling. A critical aspect of the functionality of porous membranes is the precise control of pore size and morphology. Photopolymerization-induced phase separation (photo-PIPS) offers a convenient and versatile methods for creating porous structures. However, controlling the porous morphology remains challenging due to the complex interplay between thermodynamics, polymerization kinetics, and monomer structures, which makes it difficult to establish the relationship between processing conditions and resulting morphology in photo-PIPS. Herein, a physics-based phase-field model capable of generating and characterizing the microstructures of porous materials based on both average and localized features is developed. Using the phase-field simulations as test bed, the effects of polarity, light intensity, and curing temperature, as well as the previously unexplored roles of chain transfer agents and substrates, on the morphology of the resulting porous microstructure are investigated. Experiments are performed to verify the results predicted by the simulations. This work lays out a comprehensive guide for designing PIPS-derived porous microstructures and offers practical engineering strategies for tailoring microstructure-level topology and size of pores for application-specific needs.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Effect of substrate orientation and anisotropic strength on corrosion pits

The complexities of pitting corrosion and its associated pit morphologies are critical for predicting and preventing pit-related failure in materials. With the advances in computational tools, modeling of pitting corrosion has lately gained momentum. We recently developed a phase field model for 3-D pit morphology, and in the current work, the model is utilized to gain insight into the role of substrate orientation and anisotropic strength on crystallographic pits. The influence of these parameters on pit morphology and corrosion metrics such as pit volume, current, pit area, current density, and pit depth are studied. The crystallographic pit morphology changes with substrate orientation but not significantly with anisotropic strength. Finally, the anisotropic strength strongly influences the corrosion metrics whereas most corrosion metrics remain unaffected by substrate orientation.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Characteristics of Non-Fullerene Acceptor-Based Organic Photovoltaic Active Layers Using X-ray Scattering and Solid-State NMR

With the recent development of non-fullerene acceptors, power conversion efficiencies of bulk-heterojunction organic solar cells have exceeded 18%. The morphology of the BHJ active layer, including packing, ordering, orientation, and phase behavior of the donor(s) and acceptor(s), plays critical roles in determining the device performance. We characterized the morphology of active layers consisting of mixtures of a PTB7/PTB7-Th (donor) and ITIC (acceptor) using grazing incidence wide-angle X-ray scattering, resonant soft X-ray scattering, and solid-state nuclear magnetic resonance (ssNMR) to correlate the morphology with device performance. PTB7-Th/ITIC shows a better device performance than that of PTB7/ITIC due to a smaller π-πstacking distance and smaller domain size of the phase separated morphology. One of PTB7/ITIC samples, processed from mixed solvents (chlorobenzene/benzene = 1:1 by volume), shows a possible partial miscibility and smaller domain size as revealed by ssNMR T 1ρ relaxation times, which is detrimental to device performance. ssNMR results showed that ITIC could crystallize into different forms depending on processing conditions, which may have implications on the manufacturing of devices using it as an ingredient, as well as its long-term stability in service.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Stability Enhancement in Na 0.67 Fe 0.2 Mn 0.8 O 2 Positive Electrodes via Spherical Coprecipitated Hydroxide Precursor Synthesis for Na-Ion Batteries

Mn/Fe-based layered transition metal oxides (LTMOs) are promising positive electrode materials for sodium-ion batteries (SIBs) due to their high abundance, low cost, and stable price fluctuations. At commercial scale, the fabrication of these materials commonly employs coprecipitation of hydroxide precursors, which allows for the scalable synthesis of uniform, dense particles with a tunable morphology. However, the common chelating agent (ammonia) forms unstable complexes with Fe 2+ ions, resulting in uncontrollable particle morphology and poor electrochemical properties. Here, in this study, three chelation strategies (no chelation, ammonia, oxalate) for Fe/Mn-based hydroxides are evaluated. It was found that oxalate chelation produced uniform, dense spherical hydroxide particles while particles via ammonia / no chelate routes exhibited no morphological control. The LTMOs synthesized from the oxalate-chelated hydroxide precursor formed uniform spherical particles, while the other two LTMOs showed greater variation in particle morphology. The oxalate-chelated LTMO electrode exhibited increased cycling stability due to reduced parasitic reactions with the electrolyte, as characterized by static leakage current measurements and electrochemical impedance spectroscopy.

25 ENERGY STORAGE↗