Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Modelling Capabilities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

On the determination of airplane model structure form flight data

A procedure based on a modified stepwise regression and several selection criteria is presented for the determination of airplane model structure from flight data. The aerodynamic force and moment coefficients in an airplane model are expresed either as polynomials in output and input variables or as a combination of splines. The procedure is demonstrated in three examples by attempting to determine a local, extended and global model. Some of the resulting models are verified by using the maximum likelihood estimation or by examining model prediction capabilities.

Klein, V.↗
NASA NTRS1984

An Eulerian transport/transformation/removal model for SO2 and sulfate. I - Model development. II - Model calculation of SO(x) transport in the eastern United States

A three-dimensional, time dependent Eulerian atmospheric SO2 and sulfate transport/transformation/removal model is described and applied to the eastern U.S. The model was developed in anticipation of increased input to the atmospheric sulfur content by coal-burning power plants in the near future and is intended as an aid in identifying sources of SO2. The Eulerian transport model incorporates functions for chemical transformations, dry deposition, spatial topographical variations, spatial and temporal variations of mixing layer heights, the wind field, eddy diffusivities, deposition velocities, and temperature and water concentration profiles. Attention is also given to the SO2 photochemical oxidation mechanism and rates. Results from a 72-hr simulation of SO(x) transport over the eastern U.S., using actual 1974 meteorological data, illustrate the model's capability to depict interactions between emissions, transport, chemistry and removal. Concentration distributions are demonstrated to have significant spatial and temporal variations.

Carmichael, G. R.↗
NASA NTRS1984

Parabolized Navier-Stokes analysis of three-dimensional supersonic and subsonic jet mixing problems

Three-dimensional jet mixing problems are addressed by means of two parabolized Navier-Stokes models. The first of these analyzes supersonic, overexpanded or underexpanded nonaxisymmetric jets, and yields results that exhibit complex, three-dimensional interactions. The second model uses the same numerical framework as the first, and analyzes rectangular jets by means of a pressure-split formulation. Square and rectangular mixing jet problems that highlight this model's capabilities and exhibit the distortion of the nearfield jet contours associated with the streamwise vortices generated by two corner regions are presented.

Dash, S. M.↗
NASA NTRS1984

Numerical and experimental determination of secondary separation on delta wings in subsonic flow

A quasi-three-dimensional boundary layer method for conical inviscid flows is presented. The model was developed to characterize the flow fields over slender delta wings, particularly the shed vortex sheet. A steady, incompressible, laminar boundary layer is assumed and a solution is obtained with the Smith (1966) finite difference code. Predictions are compared with oil flow patterns and surface pressure measurements for 74 and 80 deg delta wings at 0-20 deg angles of attack. The model is capable of accurately predicting the secondary separation lines. Inviscid velocities derived from panel methods lead, however, to inaccurate pressure distributions.

Dejarnette, F. R.↗
NASA NTRS1984

An elastic potential for the nonlinear response of unidirectional graphite composites

An elastic potential is proposed that is capable of modeling the reversible portion of the observed nonlinear response of unidirectional graphite fiber composites. The model includes both the stiffening stress-strain behavior as well as the softening Poisson's response for loading in the fiber direction. The model is compared with experimental results for Celion 6000/PMR-15 graphite-polyimide.

Pindera, M.-J.↗
NASA NTRS1981

Solar Corona Explorer: A mission for the physical diagnosis of the solar corona

Mission objectives and spacecraft requirements for the Solar Corona Explorer (SCE), a proposed free flying, unmanned solar research craft to be tenatively launched in 1987, were defined. The SCE's purpose is to investigate structure, dynamics and evolution of the corona, globally and in the required physical detail, to study the close coupling between the inner corona and the heliosphere. Investigative objectives are: (1) to understand the corona as the source of varying interplanetary plasma and of varying solar X-ray and extreme ultraviolet fluxes; (2) to develop the capabilities to model the corona with sufficient precision to forecast the Earth's variable environment in space, on the scales from weeks to years; (3) to develop an understanding of the physical processes that determine the dynamics and physical state of the coronal plasma, particularly acceleration processes; and (4) to develop insight and test theory on the Sun applicable to stellar coronae and winds, and in particular, to understand why cool stars put such a large fraction of their energy into X-rays. Considered related factors are: (1) duration of the mission; (2) onboard measuring instrumentation; (3) ground support equipment and procedures; and (4) programs of interpretation and modeling.

Source record↗
NASA NTRS1985

Nonlinear problems in flight dynamics involving aerodynamic bifurcations

Aerodynamic bifurcation is defined as the replacement of an unstable equilibrium flow by a new stable equilibrium flow at a critical value of a parameter. A mathematical model of the aerodynamic contribution to the aircraft's equations of motion is amended to accommodate aerodynamic bifurcations. Important bifurcations such as, the onset of large-scale vortex-shedding are defined. The amended mathematical model is capable of incorporating various forms of aerodynamic responses, including those associated with dynamic stall of airfoils.

Tobak, M.↗
NASA NTRS1986

Equivalent plate analysis of aircraft wing box structures with general planform geometry

A new equilvalent plate analysis formulation is described which is capable of modeling aircraft wing structures with a general planform such as cranked wing boxes. Multiple trapezoidal segments are used to represent such planforms. A Ritz solution technique is used in conjunction with global displacement functions which encompass all the segments. This Ritz solution procedure is implemented efficiently into a computer program so that it can be used by rigorous optimization algorithms for application in early preliminary design. A direct method to interface this structural analysis procedure with aerodynamic programs for use in aeroelastic calculations is described. This equivalent plate analysis procedure is used to calculate the static deflections and stresses and vibration frequencies and modes of an example wing configuration. The numerical results are compared with results from a finite element model of the same configuration to illustrate typical levels of accuracy and computation times resulting from use of this procedure.

Giles, G. L.↗
NASA NTRS1985

Nonlinear problems in flight dynamics involving aerodynamic bifurcations

Aerodynamic bifurcation is defined as the replacement of an unstable equilibrium flow by a new stable equilibrium flow at a critical value of a parameter. A mathematical model of the aerodynamic contribution to the aircraft's equations of motion is amended to accommodate aerodynamic bifurcations. Important bifurcations such as, the onset of large-scale vortex shedding are defined. The amended mathematical model is capable of incorporating various forms of aerodynamic responses, including those associated with dynamic stall of airfoils.

Murray Tobak↗
NASA NTRS1986

Transonic Navier-Stokes wing solution using a zonal approach. Part 1: Solution methodology and code validation

A fast diagonalized Beam-Warming algorithm is coupled with a zonal approach to solve the three-dimensional Euler/Navier-Stokes equations. The computer code, called Transonic Navier-Stokes (TNS), uses a total of four zones for wing configurations (or can be extended to complete aircraft configurations by adding zones). In the inner blocks near the wing surface, the thin-layer Navier-Stokes equations are solved, while in the outer two blocks the Euler equations are solved. The diagonal algorithm yields a speedup of as much as a factor of 40 over the original algorithm/zonal method code. The TNS code, in addition, has the capability to model wind tunnel walls. Transonic viscous solutions are obtained on a 150,000-point mesh for a NACA 0012 wing. A three-order-of-magnitude drop in the L2-norm of the residual requires approximately 500 iterations, which takes about 45 min of CPU time on a Cray-XMP processor. Simulations are also conducted for a different geometrical wing called WING C. All cases show good agreement with experimental data.

Flores, J.↗
NASA NTRS1985

Modeling of pressure-induced far-infrared absorption spectra Molecular hydrogen pairs

Meyer et al. (1985) have calculated the accurate induced dipole moment function of H2-H2 from first principles, using highly correlated wave functions for the first time in such work. The present paper is concerned with the collision-induced translational-rotational absorption coefficient for molecular hydrogen pairs, taking into account computations on the basis of the fundamental theory considered by Meyer et al. Data have been obtained for temperatures in the range from 40 to 300 K. Criteria are developed for choosing among various model line shapes. It is found that certain models are capable of approximating the quantum profiles closely, with rms errors of only a few percent.

Borysow, J.↗
NASA NTRS1984

Aeromechanical stability analysis of a multirotor vehicle with application to hybrid heavy lift helicopter dynamics

The Hybrid Heavy Lift Helicopter (HHLH) is a potential candidate vehicle aimed at providing heavy lift capability at low cost. This vehicle consists of a buoyant envelope attached to a supporting structure. Four rotor systems are also attached to the supporting structure. Nonlinear equations of motion capable of modeling the dynamics of this multi-rotor/support frame/vehicle system have been developed and used to study the fundamental aeromechanical stability characteristics of this class of vehicles. The mechanism of coupling between the blades, supporting structure and rigid body modes is identified and the effect of buoyancy ratio (buoyant lift/total weight) on the vehicle dynamics is studied. It is shown that dynamics effects have a major role in the design of such vehicles. The analytical model developed is also useful for studying the aeromechanical stability of single rotor and tandem rotor coupled rotor/fuselage systems.

Venkatesan, C.↗
NASA NTRS1986

Equivalent plate analysis of aircraft wing box structures with general planform geometry

A new equivalent plate analysis formulation is described which is capable of modeling aircraft wing structures with a general planform such as cranked wing boxes. Multiple trapezoidal segments are used to represent such planforms. A Ritz solution technique is used in conjunction with global displacement functions which encompass all the segments. This Ritz solution procedure is implemented efficiently into a computer program so that it can be used by rigorous optimization algorithms for application in early preliminary design. A direct method to interface this structural analysis procedure with aerodynamic programs for use in aeroelastic calculations is described. This equivalent plate analysis procedure is used to calculate the static deflections and stresses and vibration frequencies and modes of an example wing configuration. The numerical results are compared with results from a finite element model of the same configuration to illustrate typical levels of accuracy and computation times resulting from use of this procedure.

Giles, G. L.↗
NASA NTRS1987

Further generalization of an equivalent plate representation for aircraft structural analysis

Recent developments from a continuing effort to provide an equivalent plate representation for aircraft structural analysis are described. Previous work provided an equivalent plate analysis formulation that is capable of modeling aircraft wing structures with a general planform such as cranked wing boxes. However, the modeling is restricted to representing wing boxes having symmetric cross sections. Further developments, which are described, allow modeling of wing cross sections having asymmetries that can arise from airfoil camber or from thicknesses being different in the upper and lower cover skins. An implementation of thermal loadings, which are described as temperature distributions over the planform of the cover skins, has been included. Spring supports have been added to provide for a more general set of boundary conditions. Numerical results are presented to assess the effect of wing camber on the static and dynamic response of an example wing structure under pressure and thermal loading. These results are compared with results from a finite element analysis program to indicate how well a cambered wing box can be represented with an equivalent plate formulation.

Giles, Gary L.↗
NASA NTRS1986

Transonic Navier-Stokes wing solution using a zonal approach. Part 1: Solution methodology and code validation

A fast diagonalized Beam-Warming algorithm is coupled with a zonal approach to solve the three dimensional Euler/Navier-Stokes equations. The computer code, called Transonic Navier-Stokes (TNS), uses a total of four zones for wing configurations (or can be extended to complete aircraft configurations by adding zones). In the inner blocks near the wing surface, the thin-layer Navier-Stokes equations are solved, while in the outer two blocks the Euler equations are solved. The diagonal algorithm yields a speedup of as much as a factor of 40 over the original algorithm/zonal method code. The TNS code, in addition, has the capability to model wind tunnel walls. Transonic viscous solutions are obtained on a 150,000-point mesh for a NACA 0012 wing. A three-order-of-magnitude drop in the L2-norm of the residual requires approximately 500 iterations, which takes about 45 min of CPU time on a Cray-XMP processor. Simulations are also conducted for a different geometrical wing called WING C. All cases show good agreement with experimental data.

Flores, J.↗
NASA NTRS1987

Revised NASA axially symmetric ring model for coupled-cavity traveling-wave tubes

A versatile large-signal, two-dimensional computer program is used by NASA to model coupled-cavity travelling-wave tubes (TWTs). In this model, the electron beam is divided into a series of disks, each of which is further divided into axially symmetric rings which can expand and contract. The trajectories of the electron rings and the radiofrequency (RF) fields are determined from the calculated axial and radial space-charge, RF, and magnetic forces as the rings pass through a sequence of cavities. By varying electrical and geometric properties of individual cavities, the model is capable of simulating severs, velocity tapers, and voltage jumps. The calculated electron ring trajectories can be used in designing magnetic focusing and multidepressed collectors. The details of using the program are presented, and results are compared with experimental data.

Wilson, Jeffrey D.↗
NASA NTRS1985

A compressive failure model for anisotropic plates with a cutout under compressive and shear loads

Failure models for the prediction of compressive strength of plates with a hole are investigated. One of the models is based on the strength failure of the fibers that leads to fiber kinking failure. A different version is developed for cases where shear failure of the fibers is expected to be a dominate failure mode. Both models are capable of including the effects of combined shearing and compressive stresses around a hole in a plate and, therefore, are expected to be applicable to plates under combined shearing and compressive loadings, as well as anisotropic plates.

Guerdal, Zafer↗
NASA NTRS1986

Forecasting sea breeze thunderstorms at the Kennedy Space Center using the Prognostic Three-Dimensional Mesoscale Model (P 3DM)

A Prognostic Three-Dimensional Model (P3DM) to produce 1- to 12-hr predictions of sea breeze convective (SBC) storms at KSC is described. The P3DM was developed to account for a scale of about 10 km, interactions between surface heat and moisture fluxes, boundary layer convergence, the movement of moisture into cloud formation zones, and alterations in the convective potential in the lower levels of the atmosphere during the diurnal cycle. Initialized with wind, temperature, specific humidity and local water temperature data, the model allows for the distortion of the boundary layer moisture and thermal fields by sea breeze conditions. The results of three simulations of events leading to the onset of SBC storms are presented to demonstrate the model's capabilities, and techniques which may enhance the accuracy of the predictions are discussed.

Lyons, Walter A.↗