SEARCH · Engineering Papers

Results for “Mixture modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

All sources NASA NTRS DOE OSTI

NASA NTRS2001

Some Recent Observations on the Burning of Isolated N-Heptane and Alcohol Droplets

In a joint program involving Prof. F.A. Williams of the University of California, San Diego and Dr. V. Nayagam of the National Center for Microgravity Research on Combustion and Fluid Dynamics, the combustion of liquid fuel droplets of n-heptane, n-decane, methanol, methanol-water, ethanol and ethanol-water having initial diameters between about 1 mm and 6 mm continues to be studied. The objectives of the work are to improve fundamental knowledge of droplet combustion dynamics for pure fuels and fuel-water mixtures through microgravity experiments and theoretical analyses. The Princeton contributions to the collaborative program supports the engineering design, data analysis, and data interpretation requirements for the study of initially single component, spherically symmetric, isolated droplet combustion studies through experiments and numerical modeling. The complementary UCSD contributions apply asymptotic theoretical analyses and are described in the published literature and in a companion communication in this conference. The combined program continues to focus on analyses of results obtained from Fiber Supported Droplet Combustion (FSDC) experiments (FSDC-2, STS- 94) conducted with the above fuels in shuttle cabin air and Droplet Combustion Experiment (DCE) data obtained for unsupported and fiber supported droplets of n-heptane in Helium-Oxygen mixtures and cabin air (STS-83, STS-94). The program is preparing for a second DCE experimental mission using methanol/methanol-water as fuels and helium-oxygen-nitrogen environments. DCE-2 is to be conducted aboard the International Space Station. Emphases of recent Princeton work are on the study of simple alcohols (methanol, ethanol) and alcohol/water mixtures as fuels, with time-dependent measurements of drop size, flame-standoff, liquid-phase composition, and finally, extinction. Ground based experiments have included bench-scale studies at Princeton and collaborative experimental studies in the 2.2 second drop tower at NASA-Glenn Research Center.

Dryer, F. L.↗

NASA NTRS1980

Heat storage in alloy transformations

The theory of eutectic transformation was examined to find guidelines to the best material combinations to examine. The heats of transformation were measured calorimetrically, and the volume changes of expanding solid mixtures and homogeneous liquid solutions, especially during the transformation between the two states at fixed temperature, were measured by changes in X-ray absorption. Heat flow models appropriate to storage in phase change materials were developed along with efficient calculating procedures so that the relative importance of the problems associated with energy storage density, heat conduction, and similar properties could be assessed.

Birchenall, C. E.↗

NASA NTRS1985

Determining Mineral Types and Abundances from Reflectance Measurements

Mineral types and their abundances were quantitatively determined from laboratory reflectance spectra using principal components analysis (PCA). PCA reduced the measured spectral dimensionality and allowed testing the uniqueness and validity of spectral mixing models. In addition to interpreting absorption bands, in this new approach we interpreted variations in the overall spectral curves in terms of physical processes, namely changes in mixtures of minerals, in particle size and in illumination geometry. Application of this approach to reflectances of planetary surfaces allows interpretation to be extended to quantitative determinations of mineral types and abundances.

Smith, M. O.↗

NASA NTRS1992

Laboratory measurements of the microwave and millimeter-wave opacity of gaseous sulfur dioxide (SO2) under simulated conditions for the Venus atmosphere

Laboratory measurements have been conducted of the opacity of gaseous SO2 in a CO2 atmosphere at 12.3 cm, 1.32 cm, and 0.32 cm, with a view to the effects of this gas on the mm-wave emission of the Venus atmosphere. Close agreement is noted between the results obtained and the absorptivity predicted from a Van Vleck-Weisskopf formalism at the two shortest wavelengths, but not at the longest. These results have been incorporated into a radiative transfer model in order to infer an abundance profile for gaseous SO2 in Venus' middle atmosphere, and are also used to ascertain the effects of a SO2/CO2 gaseous mixture on the mm-wavelength spectrum of Venus.

Fahd, Antoine K.↗

NASA NTRS1993

Space Shuttle Main Engine real time stability analysis

The Space Shuttle Main Engine (SSME) is a reusable, high performance, liquid rocket engine with variable thrust. The engine control system continuously monitors the engine parameters and issues propellant valve control signals in accordance with the thrust and mixture ratio commands. A real time engine simulation lab was installed at MSFC to verify flight software and to perform engine dynamic analysis. A real time engine model was developed on the AD100 computer system. This model provides sufficient fidelity on the dynamics of major engine components and yet simplified enough to be executed in real time. The hardware-in-the-loop type simulation and analysis becomes necessary as NASA is continuously improving the SSME technology, some with significant changes in the dynamics of the engine. The many issues of interfaces between new components and the engine can be better understood and be resolved prior to the firing of the engine. In this paper, the SSME real time simulation Lab at the MSFC, the SSME real time model, SSME engine and control system stability analysis, both in real time and non-real time is presented.

Kuo, F. Y.↗

NASA NTRS1992

Investigation of advanced propulsion technologies: The RAM accelerator and the flowing gas radiation heater

The two principal areas of advanced propulsion investigated are the ram accelerator and the flowing gas radiation heater. The concept of the ram accelerator is presented as a hypervelocity launcher for large-scale aeroballistic range applications in hypersonics and aerothermodynamics research. The ram accelerator is an in-bore ramjet device in which a projectile shaped like the centerbody of a supersonic ramjet is propelled in a stationary tube filled with a tailored combustible gas mixture. Combustion on and behind the projectile generates thrust which accelerates it to very high velocities. The acceleration can be tailored for the 'soft launch' of instrumented models. The distinctive reacting flow phenomena that have been observed in the ram accelerator are relevant to the aerothermodynamic processes in airbreathing hypersonic propulsion systems and are useful for validating sophisticated CFD codes. The recently demonstrated scalability of the device and the ability to control the rate of acceleration offer unique opportunities for the use of the ram accelerator as a large-scale hypersonic ground test facility. The flowing gas radiation receiver is a novel concept for using solar energy to heat a working fluid for space power or propulsion. Focused solar radiation is absorbed directly in a working gas, rather than by heat transfer through a solid surface. Previous theoretical analysis had demonstrated that radiation trapping reduces energy loss compared to that of blackbody receivers, and enables higher efficiencies and higher peak temperatures. An experiment was carried out to measure the temperature profile of an infrared-active gas and demonstrate the effect of radiation trapping. The success of this effort validates analytical models of heat transfer in this receiver, and confirms the potential of this approach for achieving high efficiency space power and propulsion.

Bruckner, A. P.↗

NASA NTRS2017

Emissions Relationships Among Western Forest Fire Plumes: I. Emission Factors Free from Mixing Errors

Previous studies of emission factors from biomass burning are prone to largeerrors since they ignore the interplay of mixing and varying pre-fire backgroundCO2 levels. Such complications severely affected our studies of 446 forest fireplume samples measured in the Western US by the science teams of NASAsSEAC4RS and ARCTAS airborne missions. Consequently we propose a MixedEffects Regression Emission Technique (MERET) to check techniques like theNormalized Emission Ratio Method (NERM), where use of sequentialobservations cannot disentangle emissions and mixing. We also evaluate asimpler consensus technique. All techniques relate emissions to fuel burnedusing C burn = Δ Ctot added to the fire plume, where ≈ Ctot (CO2 + CO). Mixed-effectsregression can estimate pre-fire background values of Ctot (indexed byobservation j) simultaneously with emissions factors indexed by individual species i, δέλτα-xi (Cburn )i,j., MERET and consensus require more than twoemissions indicators. Our studies excluded samples where exogenous CO orCH4 might have been fed into a fire plume, mimicking emission.We sought to let the data on 13 gases and particulate properties suggest clustersof variables and plume types, using non-negative matrix factorization (NMF).While samples were mixtures, the NMF unmixing suggested purer burn types.Particulate properties (bscat, babs, SSA, AÅE) and gas-phase emissions were interrelated.Finally, we sought a simple categorization useful for modeling ozone productionin plumes. Two kinds of fires produced high ozone: those with large fuel nitrogenas evidenced by remnant CH3CN in the plumes, and also those from veryintense large burns. Fire types with optimal ratios of delta-NOydelta-HCHO associate with the highest additional ozone per unit Cburn, Perhaps theseplumes exhibit limited NOx binding to reactive organics. Perhaps these plumesexhibit limited NOx binding to reactive organics.

plumes↗

NASA NTRS2016

Emissions Relationships Among Western Forest Fire Plumes: II. Plume Typing for Sources of Ozone and Aerosol Absorption

Previous studies of emission factors from biomass burning are prone to largeerrors since they ignore the interplay of mixing and varying pre-fire backgroundCO2 levels. Such complications severely affected our studies of 446 forest fireplume samples measured in the Western US by the science teams of NASAs SEAC4RS and ARCTAS airborne missions. Consequently we propose a MixedEffects Regression Emission Technique (MERET) to check techniques like theNormalized Emission Ratio Method (NERM), where use of sequentialobservations cannot disentangle emissions and mixing. We also evaluate asimpler consensus technique. All techniques relate emissions to fuel burnedusing Cburn Ctot added to the fire plume, where Ctot (CO2 + CO). Mixed-effectsregression can estimate pre-fire background values of Ctot (indexed byobservation j) simultaneously with emissions factors indexed by individualspecies i, xi (Cburn )i,j., MERET and consensus require more than twoemissions indicators. Our studies excluded samples where exogenous CO orCH4 might have been fed into a fire plume, mimicking emission.We sought to let the data on 13 gases and particulate properties suggest clustersof variables and plume types, using non-negative matrix factorization (NMF).While samples were mixtures, the NMF unmixing suggested purer burn types.Particulate properties (bscat, babs, SSA, AE) and gas-phase emissions were interrelated.Finally, we sought a simple categorization useful for modeling ozone productionin plumes. Two kinds of fires produced high ozone: those with large fuel nitrogenas evidenced by remnant CH3CN in the plumes, and also those from veryintense large burns. Fire types with optimal ratios of delta-NOydelta-HCHO associate with the highest additional ozone per unit Cburn, Perhaps theseplumes exhibit limited NOx binding to reactive organics. Perhaps these plumesexhibit limited NOx binding to reactive organics.

ozone↗

NASA NTRS2022

Novel Parameterization of Ice Cloud Effective Diameter from Collocated CALIOP-IIR and CloudSat Retrievals

Satellite-based measurements of global ice cloud microphysical properties are sampled to develop a novel set of physical parameterizations, relating to cloud layer temperature and effective diameter D(e), that can be implemented for two separate applications: in numerical weather prediction models and lidar-based cloud radiative forcing studies. Ice cloud optical properties (i.e., spectral scattering and absorption) are estimated based on the effective size and habit mixture of the cloud particles. Historically, the ice cloud D(e) has been parameterized from aircraft in situ measurements. However, aircraft-based parameterizations are opportunistic in that they only represent specific types of clouds (e.g., convective anvil, tropopause-topped cirrus) in the regions in which they were sampled and, in some cases, are limited in fully resolving the entire vertical cloud layer. Breaking away from the aircraft-based parameterization paradigm, this study is the first of its kind to attempt a parameterization of D(e) as a function of temperature, ice water content (IWC), and lidar-derived extinction from satellite-based global oceanic measurements of ice clouds. Data from both active and passive remote sensing sensors from two of NASA’s A-Train satellites, CloudSat and CALIPSO, are collected to guide development of globally robust parameterizations of all ice cloud types and one exclusively for cirrus clouds.

Ice Cloud↗

NASA NTRS2022

Recommended Direct Simulation Monte Carlo Collision Model Parameters for Reacting Methane Flows

While hydrocarbon combustion and gas-surface interactions have been simulated for a variety of applications in continuum solvers, such processes have been rarely investigated in Direct Simulation Monte Carlo (DSMC). Thus Variable Hard/Soft Sphere (VHS/VSS)collision parameters are not available for most molecules of interest in the decomposition of methane, a significant pyrolysis gas product and potential atmospheric species for Titan re-entries. As these properties are essential for accurate modeling of gas transport and thermochemical effects, a method must be devised to compute them for use in DSMC. In this study, the methodology outlined in Stephani et al is utilized to compute the VHS/VSS parameters by fitting the Ω(1,1)and Ω(2,2) collision integrals [1]. These collision integrals are typically computed from intermolecular potentials and are used in CFD simulations to calculate transport properties such as viscosity, thermal conductivity, and diffusion. This approach ensures consistency between micro-scale collisions and macro-scale transport properties. To produce the necessary collision integrals needed for the fitting routine, we utilize the method described by Laricchiuta et al, where collision integrals are computed based on the constituent particles’ polarizability and effective electron number [2].Preliminary computations of pure-species Ω(1,1)and Ω(2,2)collision integrals produced from the coupled approach of Stephani et al and Laricchiuta et al for methane show good agreement with those computed via available ab-initio Potential Energy Surface Computations, as seen in Figure 1. Above 300K, no more than 12% deviation is observed between the two results over the temperature range of the fitted PES data [3].Current results of this study include full collision-specificVSS transport properties for a complex-species mixture involving major byproducts of pure methane decomposition. Targeted final results will include a comprehensive list of VSS parameters relevant toDSMC simulations of Titan atmospheric entry, based on the reduced kinetic model of Savajano et al [4].

M R Gosma↗

NASA NTRSDate not supplied

Technology Assessment for Producing Propellant From Lunar Water

Introduction: The presence of water ice in permanently shadowed regions (PSRs) on the lunar surface may enable a sustained human presence on the Moon with minimal need for consumables. One of the most valuable uses of lunar water is to produce rocket propellant. A sustained human presence on the Moon will re-quire frequent launches from the lunar surface, and each launch will require tons of propellant. However, many other volatiles are likely to be present in the areas where lunar water is stable1. Producing propellant from lunar water in-situ will require the separation and purification of water before it can be electrolyzed into oxygen and hydrogen gas. The Resource Exploration and Science of OUR Cosmic Environment (RESOURCE) project, funded by the Solar System Exploration Research Virtual Institute (SSERVI) program, includes a task to demonstrate the end-to-end process of water extraction, capture, purification and electrolysis to produce pure/dry oxygen gas sourced from an icy regolith mixture. Water Purification: The requirements for water purity are driven by the type of water electrolyzer used. For example, the water electrolyzer currently used on the International Space Station is based on proton ex-change membrane (PEM) technology. PEM-based electrolyzers require water to be ultrapure and deionized (>10 MegaOhm-cm) so that electrical conductivity is limited to the membranes themselves, where electrical current is used to convert H2O into H2 and O2.. A practical first step toward purifying water that is sourced from a lunar PSR is to use freeze distillation to separate water from other volatiles2. A sub-micronic filter can also be used to ensure that a minimal amount of dust is present in any lunar water that is captured. The combination of freeze distillation and sub-micronic filtration will result in relatively pure water but would require a deionization step if being fed into a PEM electrolyzer. Water Electrolysis: An alternative to PEM electrolysis is to use a Solid Oxide Electrolyzer (SOE). This technology operates at a much higher operating temperature (~800oC) and has a limited pressure range but does not require water to be ultrapure and deionized. Another advantage of SOE technology is that it produces pure dry oxygen gas without the need of an additional drying step. PEM electrolyzers produce humid oxygen gas and the humidity must be removed prior to liquefaction. Assessment: In order to compare PEM and SOE technologies side-by-side, they must be compared at a system level that includes water purification and gas drying steps. Engineers at the Johnson Space Center up-dated and utilized a detailed In-Situ Resource Utilization (ISRU) system model to compare and select the best option for the RESOURCE project which will conclude with a laboratory demonstration of the process of producing pure/dry oxygen from an icy regolith mixture in 2025.

A.J. Paz↗

NASA NTRSDate not supplied

Technology Assessment for Producing Propellant From Lunar Water

ISRU↗

NASA NTRS2011

Enceladus and Europa: How Does Hydrothermal Activity Begin at the Surface?

The question of how the surface hydrothermal activity (e.g., eruptive plumes and heat flow) is initiated can be addressed within the frame-work of our "Perrier Ocean" model. This model delivers the necessary heat and chemicals to support the heat flow and plumes observed by Cassini in Enceladus' South Polar Region. The model employs closed-loop circulation of water from a sub-surface ocean. The ocean is the main reservoir of heat and chemicals, including dissolved gases. As ocean water moves up toward the surface, pressure is re-duced and gases exsolve forming bubbles. This bub-bly mixture is less dense than the icy crust and the buoyant ocean-water mixture rises toward the surface. Near the surface, heat and chemicals, including some volatiles, are delivered to the chambers in which plumes form and also to shallow reservoirs that keep the surface ice "warm". (Plume operations, per se, are as described by Schmidt et al. and Postberg et al. and are adopted by us.) After transferring heat, the water cools, bubbles contract and dissolve, and the mixture is now relatively dense. It descends through cracks in the crust and returns to the ocean. Once the closed-loop circulation has started it is self-sustaining. Loss of water via the erupting plumes is relatively negligible compared to the amount needed to maintain the heat flow.We note that the activity described herein for the the "Perrier-Ocean" model could, a priori, apply to all small icy bodies that sheltered an interior ocean at some point in their history.

Enceladus↗

NASA NTRS2007

Initial Verification of GEOS-4 Aerosols Using CALIPSO and MODIS: Scene Classification

A-train sensors such as MODIS and MISR provide column aerosol properties, and in the process a means of estimating aerosol type (e.g. smoke vs. dust). Correct classification of aerosol type is important because retrievals are often dependent upon selection of the right aerosol model. In addition, aerosol scene classification helps place the retrieved products in context for comparisons and analysis with aerosol transport models. The recent addition of CALIPSO to the A-train now provides a means of classifying aerosol distribution with altitude. CALIPSO level 1 products include profiles of attenuated backscatter at 532 and 1064 nm, and depolarization at 532 nm. Backscatter intensity, wavelength ratio, and depolarization provide information on the vertical profile of aerosol concentration, size, and shape. Thus similar estimates of aerosol type using MODIS or MISR are possible with CALIPSO, and the combination of data from all sensors provides a means of 3D aerosol scene classification. The NASA Goddard Earth Observing System general circulation model and data assimilation system (GEOS-4) provides global 3D aerosol mass for sulfate, sea salt, dust, and black and organic carbon. A GEOS-4 aerosol scene classification algorithm has been developed to provide estimates of aerosol mixtures along the flight track for NASA's Geoscience Laser Altimeter System (GLAS) satellite lidar. GLAS launched in 2003 and did not have the benefit of depolarization measurements or other sensors from the A-train. Aerosol typing from GLAS data alone was not possible, and the GEOS-4 aerosol classifier has been used to identify aerosol type and improve the retrieval of GLAS products. Here we compare 3D aerosol scene classification using CALIPSO and MODIS with the GEOS-4 aerosol classifier. Dust, smoke, and pollution examples will be discussed in the context of providing an initial verification of the 3D GEOS-4 aerosol products. Prior model verification has only been attempted with surface mass comparisons and column optical depth from AERONET and MODIS.

Welton, Ellsworth J.↗

NASA NTRS1995

Comets, impacts, and atmospheres

We are proposing a model for the delivery of volatiles to the inner planets by icy planetesimals (comets). Laboratory studies of the trapping of gases in ice forming at low temperatures simulate the formation of comet nuclei at various distances from the Sun in the solar nebula. The total gas content as well as the relative proportions of gases trapped in the ice are strong functions of temperature. As they trap N2 inefficiently, all planetesimals formed interior to Neptune are deficient in nitrogen, acquiring values of C/N resembling those found in the inner planet volatile inventories. A mixture of three basic types of comets appears capable of accounting for the observed volatile inventories on Venus, Earth, and Mars, with the caveat that impact erosion is necessary to explain the present condition of the martian atmosphere. The model includes the possibility of several epochs of clement conditions on early Mars. Some tests of these ideas are suggested, including measurements in Jupiter's atmosphere by the Galileo probe.

Non-NASA Center↗

NASA NTRS1980

The effect of dense cores on the structure and evolution of Jupiter and Saturn

The evolutionary and static models of Jupiter and Saturn were calculated with homogeneous solar composition mantles and dense cores of material consisting of solar abundances of SiO2, MgO, Fe, and Ni. Evolutionary sequences for Jupiter were calculated with cores of mass ranging from 2 to 8% of the Jovian mass; the Saturn sequences ranged from cores of mass of 16 to 22% of total mass. Two envelope mixtures representative of the solar abundances were used: they contained mass fraction of 0.74 and 0.77 of hydrogen, respectively, and 0.24 and 0.21 mass fractions of helium. For Jupiter, the observations of the temperature at 1 bar pressure, of radius and of internal luminosity were best fit by evolutionary models with a core mass of about 6.5% and chemical composition of 0.77 mass fraction of hydrogen and 0.21 mass fraction of helium. The cooling time calculated for Saturn was 2.6 x 10 to the 9th yr, almost a factor of 2 less than the percentage of the solar system.

Grossman, A. S.↗

NASA NTRS2001

Simplified Analysis of Pulse Detonation Rocket Engine B1owdown Gasdynamics and Performance

Pulsed detonation rocket engines (PDREs) have generated considerable research interest in recent years as a chemical propulsion system potentially offering improved performance and reduced complexity compared to conventional rocket engines. The detonative mode of combustion employed by these devices offers a thermodynamic advantage over the constant-pressure deflagrative combustion mode used in conventional rocket engines and gas turbines. However, while this theoretical advantage has spurred a great deal of interest in building PDRE devices, the unsteady blowdown process intrinsic to the PDRE has made realistic estimates of the actual propulsive performance problematic. The recent review article by Kailasanath highlights some of the difficulties in comparing the available experimental measurements with numerical models. The goal of this paper is to improve understanding of PDRE blowdown gasdynamics and performance issues through use of a simplified model that captures the essential features of the unsteady blowdown process, and yet remains computationally inexpensive. The PDRE system studied here is highly idealized, consisting of a constant-area detonation tube with one end closed and the other end open to the environment. The tube is prefilled with a gaseous propellant mixture with no initial velocity or outflow to the environment. The detonation is initiated instantaneously at the closed end of the device. Chapman-Jouguet (C-J) post-detonation gas conditions are calculated using the CET89 version of the NASA thermochemical code. The I-D, unsteady method of characteristics is used to calculate the flowfield following the detonation front. See the compressible flow texts by Thompson and Zucrow and Hoffman for details of this method. Parametric studies of the effect of mixture stoichiometry, fill temperature, and blowdown pressure ratio on performance are reported. A comparison of the performance of an idealized straight-tube PDRE with a conventional steady-state rocket engine is provided. The effect of constant-gamma and equilibrium chemistry assumptions is also examined. Additionally, in order to form an assessment of the accuracy of the model, the flowfield time history is compared to experimental data from Stanford University.

Morris, Christopher I.↗

NASA NTRS1984

Global variation of the para hydrogen fraction in Jupiter's atmosphere and implications for dynamics on the outer planets

A detailed analysis of the Voyager infrared spectrometer measurements on Jupiter's atmosphere is presented, and possible implications of para hydrogen disequilibrium for the energetics and dynamics of that atmosphere are examined. The method of data analysis is described, and results for the large scale latitude variation of the para hydrogen fraction are presented. The Jovian results show pronounced latitude variation, and are compared with other parameters including wind fields, thermal structure, and various indicators of atmospheric clouds. The problem of equilibration rate is reexamined, and it is concluded that on Jupiter the equilibration time is longer than the radiative time constant at the level of emission to space, but that this inequality reverses at greater depths. A model for the interaction of fluid motions with the ortho-para conversion process is presented, and a consistent mixing length theory for the reacting ortho-para mixture is developed. Several implications of the Jovian data for atmospheric energetics and stability on the outer planets are presented.

Conrath, B. J.↗