Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MO Theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Effect of impurities on hydrogen defect stability and migration barrier in yttrium dihydride crystal

The impurity or alloying atoms in YH 2 can alter the local electronic structure and so the hydrogen defect stability, as well as the H migration barrier energy. Thus, DFT calculations were employed to determine the effect of foreign elements from alkali and alkaline earth metals to transition metals and one critical impurity element, O, on H vacancy stability and retention characteristics in YH2. Results revealed that alloying elements act as hydrogen vacancy sinks by reducing the vacancy formation energy at neighboring sites. The implantation of non-magnetic foreign elements (s1, s2, and d10 valence electrons) in hydrogen energy landscape was calculated to be minor; while the hydrogen vacancy formation energy was reduced from 1.37 eV to 1.00 eV, the migration energy barrier of hydrogen was increased from 0.87 eV to 1.15 eV for non-magnetic foreign elements. The migration energy barrier monotonically decreased with increasing d-shell occupancy, reaching as low as 0.4 eV for Cr, Mo(d4), and Fe (d4). Alloying with late transition metals (d8 and d9) moderately impacted the hydrogen vacancy formation. Finally, it was found to be O addition into the YH 2- lattice did not alter the energy landscape of hydrogen vacancies. Since alloyed YH 2 has not been studied extensively, this study provides an atomistic understanding how alloying elements and impurities trap vacancies and affects hydrogen mobility YH 2 . Meanwhile, the main findings of this study may serve as guidelines for introducing alloying elements in ZrH 2 as well.

08 HYDROGEN↗
DOE OSTI2023

Electronic Structure of Above-Room-Temperature van der Waals Ferromagnet Fe 3 GaTe 2

Fe 3 GaTe 2 , a recently discovered van der Waals ferromagnet, demonstrates intrinsic ferromagnetism above room temperature, necessitating a comprehensive investigation of the microscopic origins of its high Curie temperature ($T$ C ). In this study, we reveal the electronic structure of Fe 3 GaTe 2 in its ferromagnetic ground state using angle-resolved photoemission spectroscopy and density functional theory calculations. Our results establish a consistent correspondence between the measured band structure and theoretical calculations, underscoring the significant contributions of the Heisenberg exchange interaction ($J$ ex ) and magnetic anisotropy energy to the development of the high-$T$ C ferromagnetic ordering in Fe 3 GaTe 2 . Intriguingly, we observe substantial modifications to these crucial driving factors through doping, which we attribute to alterations in multiple spin-splitting bands near the Fermi level. In conclusion, these findings provide valuable insights into the underlying electronic structure and its correlation with the emergence of high-$T$ C ferromagnetic ordering in Fe 3 GaTe 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Doubly Stereogenic Sandwich Frameworks: Diastereomeric Metallobiscorroles

A number of Group 6 metallobiscorrole sandwich compounds with square-antiprismatic coordination were separated into diastereomers by means of careful preparative thin-layer chromatography. The diastereomers differ with respect to the relative orientation of the corrole macrocycles, which are rotated approximately ± 45° or ± 135° relative to each other. The most clear-cut results were obtained for two tungsten corroles, W[TBCF 3 PC] 2 {TBCF 3 PC = meso-tris[3,5-bis(trifluoromethyl)phenyl]corrolato} and W[TDOMePC] 2 [TDOMePC = meso-tris(3,5-dimethoxyphenyl)corrolato], for which single-crystal X-ray structures were obtained for the 135° diastereomer; the existence of the 45° diastereomer was inferred by elimination and with support from DFT calculations. For Mo[TBCF 3 PC] 2 and W[TBCF 3 PC] 2 , both diastereomers were also fully characterized spectroscopically and their 1 H NMR spectra were essentially fully assigned. The fact that each diastereomer is chiral and exists as two enantiomers (which was previously demonstrated for the 135° form of a tungsten biscorrole) establishes the doubly stereogenic nature of the metallobiscorrole framework – to our knowledge, the first such demonstration for a sandwich compound.

Aromatic compounds↗
DOE OSTI2025

Highly dense atomic Fe–Ni dual metal sites for efficient CO 2 to CO electrolyzers at industrial current densities

Carbon-supported, atomically dispersed, nitrogen-coordinated metal sites (e.g., Fe and Ni) are arguably the most promising catalysts for the electrochemical reduction of CO 2 to CO due to their unique catalytic properties and the use of earth-abundant elements. However, conventional single metal sites are constrained by their structural simplicity, causing either too weak or too strong absorption/desorption of multiple critical intermediates (e.g., *COOH and *CO). Current catalysts also suffer from ultra-low loadings (<1.0 wt%) of atomic metal active sites in catalysts, leading to inadequate performance for CO 2 -to-CO conversion. Here, we develop dual Ni/Fe metal site catalysts with significantly increased atomically dispersed metal loadings (up to 4.8 wt%). A gas-phase chemical vapor deposition (CVD) approach to introducing single Ni sites was integrated with Fe 2 O 3 /ZIF-8 precursors, followed by an optimal thermal activation. The optimized CVD-Ni/Fe–N–C catalyst exhibited remarkable electrocatalytic performance for the CO 2 reduction to CO in a continuous membrane-electrode-assembly electrolyzer, achieving a maximum CO faradaic efficiency (FE CO ) of 96% at a current density of 700 mA cm −2 in a near-neutral electrolyte. Furthermore, a desirable but challenging acidic flow-cell electrolyzer was designed using this dual metal site catalyst to improve CO 2 utilization, accomplishing a FE CO of up to 95% at a CO partial current density close to 600 mA cm −2 . Density functional theory (DFT) calculations suggest a synergetic effect between Fe–Ni pairs facilitating *COOH intermediate formation and *CO desorption simultaneously during CO 2 to CO conversion. This is key to breaking the linear scaling relationship of conventional single-metal site catalysts during the CO 2 reduction reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Synergistic double-atom catalysts of metal-boron anchored on g-C 2 N for electrochemical nitrogen reduction: Mechanistic insight and catalyst screening

The rational design of a novel catalytic center with a sound basis remains both challenging and rewarding for the electrochemical reduction of N 2 (eNRR), which has provided a feasible route for achieving clean and sustainable NH 3 production under ambient conditions. Herein, using density functional theory calculations, we demonstrate that hybrid metal (M)-boron (B) double-atom catalysts (DACs) embedded in g-C 2 N substrate (M-B@C 2 N, M = 3d, 4d and 5d transition metals) can achieve both high catalytic activity and high selectivity in eNRR. The proposed M-B@C 2 N DACs have exhibited impressive feasibility and stability thanks to the resilient and robust C 2 N substrate with abundant pyridinic N atoms distributed among right-sized pore structures. Our results reveal that like the metal center, the embedded B atom can actively involve in Ntriple bondN bond activation via π*-backdonation mechanism concomitant with the substantial charge transfer to adsorbed *N 2 , leading to sizable Nsingle bondN bond elongation. Accordingly, both adsorption energy and Nsingle bondN bond length of *N 2 can be employed as catalytic descriptors for predicting eNRR activity in terms of the limiting potentials (UL). Using high-throughput screening method, we found that six M-B@C 2 N candidates have stood out as the outstanding electrocatalysts for driving eNRR, namely, M = Ti (U L = 0 V), Mo (U L = 0 V), Nb (U L = -0.04 V), W (U L = -0.23 V), Zr (U L = -0.26 V), V (U L = -0.28 V). The underlying origin is attributed to the balanced and constrained N-affinity of M-B dual site working in synergy, which can thus be used as one important guide of catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1981

Comparison of a barotropic blocking theory with observation

Hart (1979) showed that the truncated spectral equations obtained by Charney and Devore (1979) could be derived merely by assuming that the cross-stream scale of the topography was large compared to the downstream scale. Since actual topography does not have the large y scales postulated by Hart, his model was modified in the current investigation to obtain equations with arbitrary zonal variations of topography by projecting all variable functions onto the first topographic cross-stream mode. The topographic heights and streamfunctions are expanded as Fourier series in the cross-stream coordinate and the series are truncated after the first term. This accomplishes Hart's results but permits more realistic y variations in the topography. The present investigation is the first in a two-part series. The second part will deal with a two-layer baroclinic channel flow, again with arbitrary zonal variations of topography.

Charney, J. G.↗
DOE OSTI2022

Effect of chemical substitution and external strain on phase stability and ferroelectricity in two dimensional M 2 CT 2 MXenes

Two dimensional ferroelectric materials are gaining increasing attention for use in ultrathin electronic devices owing to the presence of a spontaneous polarization down to one or two monolayers. However, such materials are difficult to identify, especially those with out-of-plane electric polarizations. Previous work predicted that a metastable ferroelectric phase exists in the 2D MXene Sc 2 CO 2 , while further studies have predicted that this phase exists in other MXene chemistries. However, questions remain about the origin of ferroelectricity, the stability of this phase relative to other competing phases, and the effect of external stimuli in these materials. In this work, we use density functional theory calculations to investigate 12 M 2 CT 2 MXenes (M = transition metal, T = surface terminating group) and determine which have the ferroelectric phase as their ground state. We compute these materials’ polarizations, densities of states, phonon band structures, Bader charges, and Born effective charges in the ferroelectric phase to elucidate the reasons for its stabilization. We demonstrate that this ferroelectric phase can be preferentially stabilized in non-ferroelectric MXenes through full chemical substitution of Sc or O, alloying of the Sc sites, or application of epitaxial strain. Finally, we show that these materials have excellent piezoelectric properties as well. This work provides a detailed understanding of ferroelectric MXenes and show how the number of 2D ferroelectric materials can be increased through chemical substitution or application of external stimuli.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Variation of the Passive Film on Compositionally Concentrated Dual-Phase Al 0.3 Cr 0.5 Fe 2 Mn 0.25 Mo 0.15 Ni 1.5 Ti 0.3 and Implications for Corrosion

The passive film on a dual-phase Al 0.3 Cr 0.5 Fe 2 Mn 0.25 Mo 0.15 Ni 1.5 Ti 0.3 FCC + Heusler (L2 1 ) compositionally concentrated alloy formed during extended exposure to an applied potential in the passive range in dilute chloride solution was characterized. Each phase, with its own distinct composition of passivating elements, formed unique passive films separated by a heterophase interface. High-resolution, surface sensitive characterization enabled chemical analysis of the passive film formed over individual phases. The film formed over the L2 1 phase had a higher concentration of Al, Ni, and Ti, while the film formed over FCC phase was of similar thickness but contained comparatively higher Cr, Fe, and Mo concentrations, consistent with the differences in bulk microstructure composition. The passive film was continuous across phase boundaries and the distribution of passivating elements (Al, Cr, and Ti) indicated both phases were independently passivated. Spatially resolved analysis of the surface chemistry of the dual-phase CCA revealed that the cation with the highest composition in passive film formed on the FCC phase was Cr (52.4 at. pct) and for the L2 1 phase was Ti (53.1 at. pct) despite the bulk concentration of each element being below 20 at. pct in their respective phases. Al, Cr, and Ti were enriched in both phases within the passive film relative to their respective bulk compositions. In parallel studies, single-phase alloys with compositions representative of the FCC and L2 1 phases were synthesized to evaluate the corrosion behavior of each phase in isolation. The corrosion behavior of the dual-phase alloy showed passivity evidenced by a pitting potential of 0.615 V SCE in 0.01 M NaCl. The pitting potential and other electrochemical parameters suggested a combination of behaviors of both single-phase samples, suggesting that the global corrosion behavior may be represented by a composite theory applied to phases, their area fractions, and interphase length. However, the interphase in the dual-phase CCA was a local corrosion initiation site and may limit localized corrosion protectiveness. The alloy design implications for optimization of second phase structure and morphology are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of Impurities on the Redox Properties of Goethite

Iron oxide minerals regulate the flux of electrons in the environment and are important hosts for trace and minor, yet critical, elements. Here, we present the first evidence of a direct link between the local coordination environments of Ni and Zn and the redox properties of their host phase goethite (α-FeOOH), the most abundant Fe(III) (oxyhydr)oxide at Earth’s surface. Here, we used aqueous redox measurements to show that the redox potential E H 0 , and hence the mineral’s stability, follows the order: pure goethite ≥ Zn-goethite > Ni-goethite. Parallel X-ray absorption and scattering measurements demonstrate, using quantum-informed analysis, that the local coordination environment of the smaller impurity, Ni, causes more bulk strain energy than Zn, which nearly accounts for the difference in E H 0 between Ni- and Zn-goethite. Our theory-informed, experimental study reveals how two common impurities affect the stability of goethite with implications for the biogeochemical reactivity of Fe(III) (oxyhydr)oxide in mediating elemental and electron fluxes in the environment.

42 ENGINEERING↗
DOE OSTI2022

13 C ENDOR Characterization of the Central Carbon within the Nitrogenase Catalytic Cofactor Indicates That the CFe 6 Core Is a Stabilizing “Heart of Steel”

Substrates and inhibitors of Mo-dependent nitrogenase bind and react at Fe ions of the active-site FeMo-cofactor [7Fe–9S–C–Mo–homocitrate] contained within the MoFe protein α-subunit. The cofactor contains a CFe 6 core, a carbon centered within a trigonal prism of six Fe, whose role in catalysis is unknown. Targeted 13 C labeling of the carbon enables electron-nuclear double resonance (ENDOR) spectroscopy to sensitively monitor the electronic properties of the Fe–C bonds and the spin-coupling scheme adopted by the FeMo-cofactor metal ions. Here this report compares 13 CFe 6 ENDOR measurements for (i) the wild-type protein resting state (E 0 ; α-Val 70 ) to those of (ii) α-Ile 70 , (iii) α-Ala 70 -substituted proteins; (iv) crystallographically characterized CO-inhibited “hi-CO” state; (v) E 4 (4H) Janus intermediate, activated for N 2 binding/reduction by accumulation of 4[ e– /H + ]; (vi) E 4 (2H)* state containing a doubly reduced FeMo-cofactor without Fe-bound substrates; and (vii) propargyl alcohol reduction intermediate having allyl alcohol bound as a ferracycle to FeMo-cofactor Fe6. All states examined, both S = 1/2 and 3/2 exhibited near-zero 13 C isotropic hyperfine coupling constants, $^Ca$ = [-1.3 ↔ +2.7] MHz. Density functional theory computations and natural bond orbital analysis of the Fe-C bonds show that this occurs because a (3 spin-up/3 spin-down) spin-exchange configuration of CFe 6 Fe-ion spins produces cancellation of large spin-transfers to carbon in each Fe–C bond. Previous X-ray diffraction and DFT both indicate that trigonal-prismatic geometry around carbon is maintained with high precision in all these states. The persistent structure and Fe–C bonding of the CFe 6 core indicate that it does not provide a functionally dynamic (hemilabile) “beating heart”-instead it acts as “a heart of steel”, stabilizing the structure of the FeMo-cofactor-active site during nitrogenase catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Data-driven upper bounds and event attribution for unprecedented heatwaves

The last decade has seen numerous record-shattering heatwaves in all corners of the globe. In the aftermath of these devastating events, there is interest in identifying worst-case thresholds or upper bounds that quantify just how hot temperatures can become. Generalized Extreme Value theory provides a data-driven estimate of extreme thresholds; however, upper bounds may be exceeded by future events, which undermines attribution and planning for heatwave impacts. Here, we show how the occurrence and relative probability of observed yet unprecedented events that exceed a priori upper bound estimates, so-called “impossible” temperatures, has changed over time. We find that many unprecedented events are actually within data-driven upper bounds, but only when using modern spatial statistical methods. Furthermore, there are clear connections between anthropogenic forcing and the “impossibility” of the most extreme temperatures. Robust understanding of heatwave thresholds provides critical information about future record-breaking events and how their extremity relates to historical measurements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Decaying scalar dark matter in the minimal left-right symmetric model

In the minimal left-right symmetric theory, the dark matter candidate is usually ascribed to the lightest right-handed neutrino. Here we present an alternative decaying dark matter candidate in this model in terms of the lightest neutral scalar from the 𝑆⁢𝑈⁢(2) 𝑅 -triplet field. This setup requires a vast hierarchy between the scalar mass and the left-right symmetry breaking scale, which renders the scalar dark matter sufficiently stable on cosmological time scales. The stability of the dark matter imposes constraints on the right-handed neutrino mass, which has consequences for the neutrino mass generation, as well as for leptogenesis. Although somewhat fine-tuned, it provides a very economical scenario wherein the minimal left-right model can simultaneously explain dark matter, neutrino masses, and the matter-antimatter asymmetry of the Universe.

baryogenesis↗
DOE OSTI2026

Scalar-induced neutrinoless double beta decay in SU(5)

We discuss the role of heavy scalar fields in mediating neutrinoless double beta decay (0νββ) within the SU(5) Grand Unified Theory framework, extended suitably to include neutrino mass. In such a minimal realistic SU(5) setup for fermion masses, the scalar contributions to 0νββ are extremely suppressed as a consequence of the proton decay bound. We circumvent this problem by imposing a discrete Z 3 symmetry. However, the scalar contributions to 0νββ remain suppressed in this SU(5) x Z 3 model due to the neutrino mass constraint. We find that the 0νββ contribution can be enhanced by extending the scalar sector with an additional 15-dimensional scalar representation with suitable Z 3 charge. Such an extension not only yields realistic fermion mass spectra but also leads to experimentally testable predictions in upcoming ton-scale 0νββ searches, which can be used as a sensitive probe of the new scalars across a broad range, from LHC-accessible scales up to ∼ 10 10 GeV.

Baryon/Lepton Number Violation↗
DOE OSTI2021

Machine learning elastic constants of multi-component alloys

The present manuscript explores application of machine learning methods for determining elastic constants and other derived mechanical properties of multi-component alloys. Here, a number of machine learning models, including linear regression, neural network and random forest based models, are trained and tested on a dataset of binary alloys generated using density functional theory (DFT) calculations and spanning over a large number of elemental species in the periodic table. Starting with a wide range of simple and easily accessible compositionally-averaged elemental features, a correlation-based feature selection strategy was used to systematically down-select a set of most relevant features towards the prediction of the elasticity tensor components. The true predictive performance and the associated uncertainties of the models were established by testing on unseen data and bootstrapping, respectively. A single and pair-wise feature partial dependence analysis was performed to visualize the average property trends in the multi-dimensional feature space in order to further understand the achieved predictive performance. The utility of the trained model is further demonstrated by obtaining sufficiently accurate yet highly efficient approximations for bulk modulus, Young’s modulus, shear modulus and Poisson’s ratio for alloys beyond the binary space (i.e., two-component alloys) on which the model was originally trained. More importantly, we test and validate the predictive performance of the developed model directly against the experimentally measured elastic constants of technologically relevant multi-component alloys (such as, Ni- and Ti-based alloys). Finally, utility of such a data-enabled route is demonstrated by predicting the possible range of various elastic properties for vast composition space available within the five component Ni-Cr-Fe-Mo-W alloy system in a high-throughput manner.

36 MATERIALS SCIENCE↗
DOE OSTI2025

La 2 ⁢O 3 ⁢Mn 2 ⁢Se 2 : A correlated insulating layered d-wave altermagnet

Altermagnets represent a new class of magnetic phases without net magnetization, invariant under a combination of rotation and time reversal. Unlike conventional collinear antiferromagnets (AFM), altermagnets could lead to new correlated states and important material properties deriving from their nonrelativistic spin-split band structure. Indeed, they serve as the magnetic analogue of unconventional superconductors and can yield spin-polarized electrical currents in the absence of external magnetic fields, making them promising candidates for next-generation spintronics. Here, we report altermagnetism in the correlated insulator, magnetically ordered tetragonal oxychalcogenide, L⁢a 2 ⁢O 3⁢ M⁢n 2 ⁢S⁢e 2 . Symmetry analysis reveals a 𝑑 𝑥 2 −𝑦 2 -wave-like spin-momentum locking arising from the M⁢n 2 ⁢O Lieb lattice, supported by density functional theory (DFT) calculations. Magnetic measurements confirm the AFM transition below ∼166K while neutron pair distribution function analysis reveals a 2D short-range magnetic order that persists above the Néel temperature. Single crystals are grown and characterized using x-ray diffraction, optical and electron microscopy, and micro-Raman spectroscopy to confirm the crystal structure, stoichiometry, and uniformity. Furthermore, our findings establish L⁢a 2⁢ O 3 ⁢M⁢n 2⁢ S⁢e 2 as a model altermagnetic system realized on a Lieb lattice.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Emergence of quasiparticles in a doped Mott insulator

How a Mott insulator develops into a weakly coupled metal upon doping is a central question to understanding various emergent correlated phenomena. To analyze this evolution and its connection to the high- T c cuprates, we study the single-particle spectrum for the doped Hubbard model using cluster perturbation theory on superclusters. Starting from extremely low doping, we identify a heavily renormalized quasiparticle dispersion that immediately develops across the Fermi level, and a weakening polaronic side band at higher binding energy. The quasiparticle spectral weight roughly grows at twice the rate of doping in the low doping regime, but this rate is halved at optimal doping. In the heavily doped regime, we find both strong electron-hole asymmetry and a persistent presence of Mott spectral features. Finally, we discuss the applicability of the single-band Hubbard model to describe the evolution of nodal spectra measured by angle-resolved photoemission spectroscopy (ARPES) on the single-layer cuprate La 2– x Sr x CuO 4 (0 ≤ x ≤ 0.15). This work benchmarks the predictive power of the Hubbard model for electronic properties of high- T c cuprates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Motivations for early high-profile FRIB experiments

This white paper is the result of a collaboration by many of those that attended a workshop at the facility for rare isotope beams (FRIB), organized by the FRIB Theory Alliance (FRIB-TA), on ‘Theoretical Justifications and Motivations for Early High-Profile FRIB Experiments’. It covers a wide range of topics related to the science that will be explored at FRIB. After a brief introduction, the sections address: section 2: Overview of theoretical methods, section 3: Experimental capabilities, section 4: Structure, section 5: Near-threshold Physics, section 6: Reaction mechanisms, section 7: Nuclear equations of state, section 8: Nuclear astrophysics, section 9: Fundamental symmetries, and section 10: Experimental design and uncertainty quantification.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Synthetic Access to a Framework-Stabilized and Fully Sulfided Analogue of an Anderson Polyoxometalate that is Catalytically Competent for Reduction Reactions

Polyoxometalates (POMs) featuring 7, 12, 18, or more redox-accessible transition metal ions are ubiquitous as selective catalysts, especially for oxidation reactions. The corresponding synthetic and catalytic chemistry of stable, discrete, capping-ligand-free polythiometalates (PTMs), which could be especially attractive for reduction reactions, is much less well developed. Among the challenges are the propensity of PTMs to agglomerate and the tendency for agglomeration to block reactant access of catalyst active sites. Nevertheless, the pervasive presence of transition metal sulfur clusters metalloenzymes or cofactors that catalyze reduction reactions and the justifiable proliferation of studies of two-dimensional (2D) metal-chalcogenides as reduction catalysts point to the promise of well-defined and controllable PTMs as reduction catalysts. Here, we report the fabrication of agglomeration-immune, reactant-accessible, capping-ligand-free Co II Mo 6 IV S 24 n– clusters as periodic arrays in a water-stable, hierarchically porous Zr-metal–organic framework (MOF; NU1K) by first installing a disk-like Anderson polyoxometalate, Co III Mo 6 VI O 24 m– , in size-matched micropores where the siting is established via difference electron density (DED) X-ray diffraction (XRD) experiments. Flowing H 2 S, while heating, reduces molybdenum(VI) ions to Mo(IV) and quantitatively replaces oxygen anions with sulfur anions (S 2– , HS – , S 2 2– ). DED maps show that MOF-templated POM-to-PTM conversion leaves clusters individually isolated in open-channel-connected micropores. Importantly, the structure of the immobilized cluster as determined, in part, by X-ray photoelectron spectroscopy (XPS), X-ray absorption fine structure (XAFS) analysis, and pair distribution function (PDF) analysis of total X-ray scattering agrees well with the theoretically simulated structure. PTM@MOF displays both electrocatalytic and photocatalytic competency for hydrogen evolution. Nevertheless, the initially installed PTM appears to be a precatalyst, gaining competency only after the loss of ~3 to 6 sulfurs and exposure to hydride-forming metal ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗