Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Investigation of the Reactivity of Calcium Minerals Under Simulated Venus Conditions

The temperature and pressure at the modal radius on Venus is approximately 740K-95.6 bar, while the atmosphere is composed of various volcanic gases such as SO2, OCS, and H2S. Experiments and modeling completed by past researchers have found that these gases can be highly reactive with minerals at Venus conditions. However, the kinetics for many of these reactions have yet to be constrained by experiments. In this project we will research the effects of simulated Venus conditions on the stability of calcium minerals. In particular, we will focus on experiments with exposure to SO2 due to its reactivity with calcium. Additionally, we have selected several minerals that form under different geologic processes to investigate the effects of crystal lattice on kinetics.

S T Port↗

Mineral composition of Al-rich float rocks in Jezero crater as seen by Super-Cam

During its traverse across the Jezero crater floor and western fan, the Perseverance rover encountered > 4000 float rocks – of variable size (up to ~ 50 cm) scattered on the ground without apparent connection to the surrounding stratigraphy [1]. Analysis performed using the SuperCam instrument’s [2,3,4], Laser Induced Breakdown Spectroscopy (LIBS) revealed a high concentration of Al 2 O 3 , Cr, Ti and Ni [5], and very low of Fe, Mg, Ca and Na [5, 1]. SuperCam’s infrared reflectance spectroscopy (IRS, between 1.3 and 2.6 μm) showed the presence of Al-rich aqueous alteration minerals (characteristic absorption bands of kaolinite and Al-smectites at 1.4 and 2.2 μm) as well as some (likely Cr-) spinels, identified uthrough their broad asymmetric 2 μm band, responsible for the concavity of IR spectra. These mineral species alone do not fully account for the spectral shapes; hence, the objective is to further investigate spectral modeling to determine the most probable mineral assemblages. Here, we present the results of modeling 17 light-toned float rocks, up to Sol 924, complementary to [1].

C. Royer↗

Micro-Analysis of Actinide Minerals for Nuclear Forensics and Treaty Verification

Micro-Raman spectroscopy has been demonstrated to be a viable tool for nondestructive determination of the crystal phase of relevant minerals. Collecting spectra on particles down to 5 microns in size was completed. Some minerals studied were weak scatterers and were better studied with the other techniques. A decent graphical software package should easily be able to compare collected spectra to a spectral library as well as subtract out matrix vibration peaks. Due to the success and unequivocal determination of the most common mineral false positive (zircon), it is clear that Raman has a future for complementary, rapid determination of unknown particulate samples containing actinides.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Radioactive Demonstration Of Mineralized Waste Forms Made From Hanford Low Activity Waste (Tank SX-105 And AN-103) By Fluidized Bed Steam Reformation

One of the immobilization technologies under consideration as a Supplemental Treatment for Hanford’s Low Activity Waste (LAW) is Fluidized Bed Steam Reforming (FBSR). The FBSR technology forms a mineral waste form at moderate processing temperatures thus retaining and atomically bonding the halides, sulfates, and technetium in the mineral phases (nepheline, sodalite, nosean, carnegieite). Additions of kaolin clay are used instead of glass formers and the minerals formed by the FBSR technology offers (1) atomic bonding of the radionuclides and constituents of concern (COC) comparable to glass, (2) short and long term durability comparable to glass, (3) disposal volumes comparable to glass, and (4) higher Na2O and SO{sub 4} waste loadings than glass. The higher FBSR Na{sub 2}O and SO{sub 4} waste loadings contribute to the low disposal volumes but also provide for more rapid processing of the LAW. Recent FBSR processing and testing of Hanford radioactive LAW (Tank SX-105 and AN-103) waste is reported and compared to previous radioactive and non-radioactive LAW processing and testing.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Carbon Mineralization by Aqueous Precipitation for Beneficial Use of CO2 from Flue Gas

The objective of this project is to demonstrate an innovative process to mineralize CO2 from flue gas directly to reactive carbonates and maximize the value and versatility of its beneficial use products. The program scope includes the design, construction, and testing of a CO2 Conversion to Material Products (CCMP) Pilot Demonstration Plant utilizing CO2 from the flue gas of a power production facility in Moss Landing, CA as well as flue gas from coal combustion. This topical report covers Phase 2b, which is the construction phase of pilot demonstration subsystems that make up the integrated plant. The subsystems included are the mineralization subsystem, the Alkalinity Based on Low Energy (ABLE) subsystem, the waste calcium oxide processing subsystem, and the fiber cement board production subsystem. The fully integrated plant is now capable of capturing CO2 from various sources (gas and coal) and mineralizing into a reactive calcium carbonate binder and subsequently producing commercial size (4ftx8ft) fiber cement boards. The topical report provides a description of the “as built” design of these subsystems and the results of the commissioning activities that have taken place to confirm operability. At the end of Phase 2b, the CCMP pilot demonstration is fully ready for testing.

Clean Coal Technology↗

Synthetic Calcium Carbonate Production by Carbon Dioxide Mineralization of Industrial Waste Brines

Carbon dioxide mineralization converts CO 2 into stable carbonates. Fine carbonates, such as precipitated calcium carbonate, are mineral commodities used as additives to a wide range of consumer and industrial products. In this project, we develop two CO 2 mineralization processes that Utilize industrial waste streams, including coal ashes and produced water, as low-carbon calcium sources Generates alkalinity at low energy and economic cost using waste alkaline materials or ion-exchange Integrate CO 2 emission control with wastewater management

20 FOSSIL-FUELED POWER PLANTS↗

Pilot-Scale Testing of an Integrated Circuit for the Extraction of Rare Earth Minerals and Elements from Coal and Coal Byproducts Using Advanced Separation Technologies

The primary objective of this project was to develop and demonstrate an integrated pilot-scale circuitry for recovering high-value rare earth elements (REEs) from coal and coal byproducts. The target performance was to produce a mixed REE product with content of at least two percent by weight on a dry mass basis in a cost-effective and environmentally benign manner. During the first nine months of the project period (Phase 2 Budget Period 2), pilot plant construction was completed including all field site startup activities such as permitting, engineering design, procurement/bidding, unit fabrication, site construction, equipment installation, module assembly, safety training, and circuit shakedown. During the remaining 21 months of project period (Phase 2 Budget Period 3), detailed field-testing activities were performed including feedstock sample collection and preparation, exploratory testing, circuit modification, detailed parametric study, and performance optimization. A detailed techno-economic analysis was performed based on the pilot plant testing findings which provided various scenarios for REE production. The project successfully accomplished the proposed target performance by producing mixed rare earth oxide (REO) with greater than 90% purity by weight in a continuous pilot scale operation from two distinctly different coarse refuse materials (i.e., West Kentucky No. 13 and Fire Clay coal seams), and at least three secondary sources (i.e., heap leach process and naturally formed acid mine drainage system). Project partners included the University of Kentucky, Virginia Tech, West Virginia University, Alliance Coal, Blackhawk Mining, Mineral Refining Company, and Mineral Separation Technologies. The pilot scale test facility was constructed at a former mining complex owned by Alliance Natural Resource Partners (Alliance Coal). The site was rehabilitated to accommodate the equipment installation, construction and fabrication, electrical power requirement, water line management and containment. The process units constructed and installed included X-ray sorting unit, crushing and grinding unit, physical separation unit, acid leaching unit, solvent extraction unit, and wastewater management unit. A rare earth mineral concentration unit was constructed as a standalone unit for flexible operation. A detailed environmental assessment and control plan was carried out to identify and quantify any potential impacts of the pilot-scale processing circuitry on the human and eco-system health and well-being. Corresponding mitigation strategies and control measures were provided. A conceptual flowsheet was developed to effectively remove thorium and uranium from high purity rare earth oxide mix or any potential radionuclide enriched stream. The two distinct feedstock materials were secured from the Blackhawk Mining Complex in eastern Kentucky where the Fire Clay (Hazard No. 4) seam is processed. The West Kentucky No. 13 (Baker) coarse refuse material was collected from an active process stream at an Alliance coal preparation plant located in western Kentucky. Characterization analysis indicated that both of feed materials generated from the two sources contained >300 ppm of TREEs on a dry whole mass basis which met the requirements for a qualified feed stock. The two feedstocks were further upgraded using a dual x-ray sorter to prepare the feed material for hydrometallurgical circuit. Thermal treatment on feed material prior to leaching was found to: 1) improve the leaching recovery of REEs, 2) increase the leaching kinetics, and 3) allow the leaching reaction to occur at lower acidity. Roasting at 600°C was selected as the pre-treatment condition for both West Kentucky No. 13 and Fire Clay coarse refuse material. Over 40% of leaching recovery was achieved by roasting West Kentucky No. 13 material having a top particle size of 3 mm in the pilot scale operation using 1.2M sulfuric acid leaching at 75OC. Initial pilot scale testing involved continuous operation of the pilot plant for 94 hours. The leaching unit was operated at solid-to-liquid ratio of 1 to 10 (w/v) using 0.5M sulfuric acid solution at a temperature of 75°C. The continuous solvent extraction circuit utilized rougher and cleaner units with DEHPA and TBP as the extractants. An innovative stripping circuit was developed to accumulate the REE concentration in the stripping solution to a level above 600 ppm. A bleed stream from the recycled strip solution was treated using oxalic acid precipitation which produced a high grade rare earth oxalate. The oxalate product was roasted to remove the oxalate which produced a rare earth oxide product having a purity greater 90%. Due to high concentrations of contaminant ions in the pregnant leach solution (PLS), a modified flowsheet was developed that involved pre-concentration of the REEs using multiple stages of precipitation and redissolution. The advantage of this process was improved removal of contamination before the downstream purification process and a significant cost reduction relative to the circuit that utilized the solvent extraction process. The modified circuitry included processes involving leaching, multistage precipitation, redissolution, and oxalate precipitation followed by roasting of the oxalate product. The circuit produced a mixed REO that was 92.96% pure from the initial test. A detailed parametric test plan was carried out which involved varying key parameters including solids feed rate, acid flowrate, acid concentration, multistage precipitation pH, redissolution pH, oxalate precipitation dosage and pH. The response variables included REE recovery, contaminant recovery, REO product grade and overall chemical consumption. Test results indicated that the acid-to-solid ratio is the key parameter to leaching efficiency as performance deteriorated with an increase in solids concentration. The optimal pH determined for REE precipitation and redissolution was 6.5 and 2.5, respectively. Additional tests were conducted to further improve the flowsheet. Recirculating a portion of the PLS to the feed of the leach tanks improved the leaching performance by lowering the pH of the leaching system and reducing the contamination recovery by shortening the residence time. Moreover, the removal of Al prior to REE precipitation significantly reduced the oxalic acid consumption in the oxalate precipitation circuit. The modified circuit produced over 90% grade REO by weight from both West Kentucky No. 13 and Fire Clay coarse refuse material in pilot scale continuous test programs. A case analysis model was developed to project the REE and major contaminants concentration in each PLS stream based on the leaching condition, pH cut point, and oxalic acid dosage. A correlation was established using empirical and semi-empirical models. Using the models, chemical consumption required for each stage was predicted based on the projected performance of the hydrometallurgy circuit. After identifying the optimum conditions, validation tests were carried out for the treatment of both West Kentucky No. 13 and Fire Clay coarse refuse materials in the pilot plant. The actual circuit performance and chemical consumptions were very close to the model predictions. Other than the two coarse refuse sources, several secondary feedstocks were also tested in the pilot plant facility. A “heap leach” system was constructed using the coarse refuse material generated from cleaning the West Kentucky No. 13 seam coal. Using the two stage SX rougher and cleaner circuit, a concentrate with a grade >90% REO was produced while recovering >97% of the REEs from the heap leach PLS. Naturally generated acid mine drainage (AMD) from West Kentucky No.13 mine was processed using the multistage precipitation circuit in the pilot plant in a test conducted for a period of 32 hours. The final grade of the mix RE oxide produced from the AMD was 90.84% with an overall circuit recovery of 64%. The primary source of REE was the selective precipitation steps involving iron and aluminum rejection. The hydrophobic-hydrophilic separation (HHS) process was proven to effectively recover coal from fine waste materials. For REM recovery, the HHS process was able to produce concentrates at grades of approximately 1.8% REE on an ash basis; however, recovery values were typically low, <10%, under the optimal conditions determined in the laboratory-scale testing. Staged testing of the pilot-scale HHS process for coal recovery and semi-continuous laboratory testing for REM testing showed that a total concentration ratio of more than 15x was observed for the REM recovery process. A circuit simulation package was developed for REE extraction and purification using a spreadsheet-based platform (Microsoft Excel). The REESim circuit simulation package is configured to track the mass and volume flows of components passing through a series of unit operations specified and configured by the user. The mass rates can then be utilized by the user to determine important performance indicators such as product mass yields, concentrate purity levels, element-by-element recoveries, and so forth. The techno-economic analysis showed that the roasting and leaching operations were the most expensive capital items, each contributing approximately 30% to the total capital cost. One notable contributor to the high production costs was the low REE recovery observed in the pilot scale trials. The product basket price was shown to have a strong influence on the economic viability of the scenarios, with the scandium price being the most significant influencer. Operating cost was shown to be extremely sensitive to REE recovery, REE feed grade, and leaching acid consumption. An analysis of ten different scenarios for a 500 t/h commercial operation revealed that three were economically favorable, producing internal rates of return varying from 27.7% to 33.1% and payback periods of 4 to 5 years. The project successfully developed and demonstrated a process to recover REEs from coal and coal byproducts in a pilot-plant operation which consistently produced over 90% grade REO mix from varies types of feedstocks. Commercialization analysis showed that the technology readiness level successfully achieved TRL 6 at the end of the project and demonstrated the need and the potential for scaling the process to further advance the technologies toward the goal of providing a domestic supply of REEs at a commercial scale.

01 COAL, LIGNITE, AND PEAT↗

Interaction of Mineral Surfaces with Simple Carboxylic Acids In Aqueous And / or Solution In Hexane

DRIFTS was used to investigate the adsorption of simple carboxylic acids to the surface of kaolinite clay and to alumina. Dry powder samples were examined without evacuation or blending with KBr. It was possible to determine monolayer coverage of the organic on the mineral surface from analysis of the spectra. Resolution of peaks from the organic was possible for coverage as low as 0.02 molecules / nm2. Studies were done with adsorption from aqueous solution and or solution in hexane. It should be noted that under atmospheric conditions, mineral surfaces have a surface layer of water approximately 3 molecules thick. At sub monolayer coverage, spectral features of salicylic acid deposited on gamma-alumina from hexane were not distinguishable from those deposited from water. But, greater surface loading could be achieved with adsorption from the organic solvent (hexane)and new peaks were observed. Adsorption of salicylic acid , from solution in hexane , onto kaolinite was also possible. In almost all cases, spectral features associated with the carboxyl moiety were substantially altered, indicating a significant role in the adsorption mechanism. The results using hexane as solvent compared with water suggest that the surface adsorbed hydroxyl and molecular water, present on mineral oxides under ambient conditions, are a key determinant of molecular adsorbate architecture.

Thomas, Joan↗

CRITICAL MINERAL PARTITIONING IN COAL-HOSTED CLAYS OF THE POWDER RIVER BASIN, WY DETERMINED BY SEQUENTIAL EXTRACTION

Increasing demand for a more robust domestic supply of rare earth elements (REE) and critical minerals (CM) has led to significant investigation into unconventional sources. Coal and coal byproducts from the Powder River Basin (PRB) of Wyoming are potential sources of REE and CM. The association between strategic metals and their mineral hosts has important implications for extractability. Samples of overburden, underclays, and clay-rich partings were selected for analysis from core and bucket samples from three PRB coal mines. Quartz, illite, and kaolinite-group minerals are abundant in clay-rich portions of the PRB coal strata. We performed a five-step sequential extraction to constrain critical metal partitioning in samples of overburden and underclays (n=10). Unlike the occurrences of REE in other clay deposits, insignificant amounts of total REE + Y (TREY) were recovered in the ion-exchangeable fraction (< 0.5 ppm). A significant amount of TREY was leached from the acid-soluble fraction by 0.1M HCl, suggesting REE may be tied up within crystal lattices rather than sorbed to clay surfaces. The acid-soluble fraction contained between 3 and 250 ppm TREY, with an average TREY concentration of 60 ppm. Relative standard deviations for each extraction step were generally < ±10%. Whole-rock samples (n=72) contained greater TREY enrichment in overburden than in underclays and partings, however, the opposite is true for other CM, such as Ti and V. Other locations in the PRB show different enrichment trends. Our findings supplement a broader effort to couple REE and CM extraction with existing domestic coal production and contribute to the fundamental understanding of how these metals concentrate in low-temperature basin environments.

Stuart, Sophia↗

THE POTENTIAL FOR REUSE OF PRODUCED WATER IN THE CRITICAL MINERALS SUPPLY CHAIN IN THE POWDER RIVER BASIN OF WYOMING AND MONTANA

The Powder River Basin (PRB) Carbon Ore, Rare Earth, and Critical Minerals (CORE-CM) project is part of the Department of Energy sponsored CORE-CM initiative focused on domestic production of critical minerals and promoting economic development in traditionally fossil fuel producing basins. An important part of this project is regional assessment of waste streams and development of basinal strategies for waste stream reuse within the critical minerals (CM) supply chain. The availability of water for all parts of the CM supply chain is of particular concern in the arid mountain west. In the Wyoming PRB, average annual production of produced water (PW) by the oil and gas industry is more than 16 billion gallons (2015-2022). Through published data and engagement with industry partners, we conducted a preliminary investigation of PW in the PRB to understand volumes, quality, and the potential for use in the CM supply chain. PW was assessed for potential as a direct feedstock and for use in CM processing of a variety of conventional and unconventional feedstocks, including ore from the Bear Lodge Alkaline Complex, coal, and coal byproducts. Preliminary findings suggest that PRB PW contains significantly lower concentrations of rare earth elements (REE) and lithium than would be considered economic at this time. For example, concentrations of REE+Sc measured in PRB PW are <1 ppb (DE-EE0007603), and only seven PRB PW samples reported in the USGS PW database had lithium concentrations ≥50 ppm. However, enrichment of CM in residual brine and sludge from PW evaporation and solidification treatment ponds may yield concentrations of interest over a pond lifetime and should be considered in future studies. Coal bed methane (CBM) PW accounted for 42% of all PW in the Wyoming PRB in 2022. Compared to non-CBM PW, PRB CBM water quality generally meets standards allowing surface discharge and reuse in local industries such as livestock. CBM PW may help to fill water needs within the CM supply chain. Understanding the distribution of CBM PW that is discharged versus reused will help develop basinal reuse strategies.

Jackson, Lily↗

The Origin of Refractory Minerals in Comet 81P/Wild 2

Refractory Ti-bearing minerals in the calcium-, aluminium-rich inclusion (CAI) Inti, recovered from the comet 81P/Wild 2 sample, were examined using analytical (scanning) transmission electron microscopy (STEM) methods including imaging, nanodiffraction, energy dispersive spectroscopy (EDX) and electron energy loss spectroscopy (EELS). Inti fassaite (Ca(Mg,Ti,Al)(Si,Al){sub 2}O{sub 6}) was found to have a Ti{sup 3+}/Ti{sup 4+} ratio of 2.0 {+-} 0.2, consistent with fassaite in other solar system CAIs. The oxygen fugacity (log f{sub O{sub 2}}) of formation estimated from this ratio, assuming equilibration among phases at 1509K, is -19.4 {+-} 1.3. This value is near the canonical solar nebula value (-18.1 {+-} 0.3) and in close agreement with that reported for fassaite-bearing Allende CAIs (-19.8 {+-} 0.9) by other researchers using the same assumptions. Nanocrystals of osbornite (Ti(V)N), 2-40 nm in diameter, are embedded as inclusions within anorthite, spinel and diopside in Inti. Vanadium is heterogeneously distributed within some osbornite crystals. Compositions range from pure TiN to Ti{sub 0.36}V{sub 0.64}N. The possible presence of oxide and carbide in solid solution with the osbornite was evaluated. The osbornite may contain O but does not contain C. The presence of osbornite, likely a refractory early condensate, together with the other refractory minerals in Inti, indicates that the parent comet contains solids that condensed closer to the proto-sun than the distance at which the parent comet itself accreted. The estimated oxygen fugacity and the reported isotopic and chemical compositions are consistent with Inti originating in the inner solar system as opposed to it being a surviving CAI from an extrasolar source. These results provide insight for evaluating the validity of models of radial mass transport dynamics in the early solar system. The oxidation environments inferred for the Inti mineral assemblage are inconsistent with an X-wind formation scenario. In contrast, radial mixing models allowing accretion of components from different heliocentric distances can satisfy the observations from the cometary CAI Inti.

36 MATERIALS SCIENCE↗

Groundwater mixing and mineralization processes in a mountain–oasis–desert basin, northwest China: hydrogeochemistry and environmental tracer indicators

Hydrogeochemistry and environmental tracers ({sup 2}H, {sup 18}O, {sup 87}Sr/{sup 86}Sr) in precipitation, river and reservoir water, and groundwater have been used to determine groundwater recharge sources, and to identify mixing characteristics and mineralization processes in the Manas River Basin (MRB), which is a typical mountain–oasis–desert ecosystem in arid northwest China. The oasis component is artificial (irrigation). Groundwater with enriched stable isotope content originates from local precipitation and surface-water leakage in the piedmont alluvial–oasis plain. Groundwater with more depleted isotopes in the north oasis plain and desert is recharged by lateral flow from the adjacent mountains, for which recharge is associated with high altitude and/or paleo-water infiltrating during a period of much colder climate. Little evaporation and isotope exchange between groundwater and rock and soil minerals occurred in the mountain, piedmont and oasis plain. Groundwater δ{sup 2}H and δ{sup 18}O values show more homogeneous values along the groundwater flow direction and with well depths, indicating inter-aquifer mixing processes. A regional contrast of groundwater allows the {sup 87}Sr/{sup 86}Sr ratios and δ{sup 18}O values to be useful in a combination with Cl, Na, Mg, Ca and Sr concentrations to distinguish the groundwater mixing characteristics. Two main processes are identified: groundwater lateral-flow mixing and river leakage in the piedmont alluvial–oasis plain, and vertical mixing in the north oasis plain and the desert. The {sup 87}Sr/{sup 86}Sr ratios and selected ion ratios reveal that carbonate dissolution and mixing with silicate from the southern mountain area are primarily controlling the strontium isotope hydrogeochemistry.

58 GEOSCIENCES↗

Reactive oxygen species on bone mineral density and mechanics in Cu,Zn superoxide dismutase (Sod1) knockout mice

Research highlights: {yields} Reactive oxygen species (ROS) are considered to be a factor in the onset of a number of age-associated conditions, including loss of BMD. {yields} Cu,Zn-superoxide dismutase (Sod1) deficient mice have increased ROS, reduced bone mineral density, decreased bending stiffness, and decreased strength compared to WT controls. {yields} Increased ROS caused by the deficiency of Sod1, may be responsible for the changes in BMD and bone mechanics and therefore represent an appropriate model for studying mechanisms of age-associated bone loss. -- Abstract: Reactive oxygen species (ROS) play a role in a number of degenerative conditions including osteoporosis. Mice deficient in Cu,Zn-superoxide dismutase (Sod1) (Sod1{sup -/-} mice) have elevated oxidative stress and decreased muscle mass and strength compared to wild-type mice (WT) and appear to have an accelerated muscular aging phenotype. Thus, Sod1{sup -/-} mice may be a good model for evaluating the effects of free radical generation on diseases associated with aging. In this experiment, we tested the hypothesis that the structural integrity of bone as measured by bending stiffness (EI; N/mm{sup 2}) and strength (MPa) is diminished in Sod1{sup -/-} compared to WT mice. Femurs were obtained from male and female WT and Sod1{sup -/-} mice at 8 months of age and three-point bending tests were used to determine bending stiffness and strength. Bones were also analyzed for bone mineral density (BMD; mg/cc) using micro-computed tomography. Femurs were approximately equal in length across all groups, and there were no significant differences in BMD or EI with respect to gender in either genotype. Although male and female mice demonstrated similar properties within each genotype, Sod1{sup -/-} mice exhibited lower BMD and EI of femurs from both males and females compared with gender matched WT mice. Strength of femurs was also lower in Sod1{sup -/-} mice compared to WT as well as between genders. These data indicate that increased oxidative stress, due to the deficiency of Sod1 is associated with decreased bone stiffness and strength and Sod1{sup -/-} mice may represent an appropriate model for studying disease processes in aging bone.

60 APPLIED LIFE SCIENCES↗

The origin of the pozzolanic activity of calcined clay minerals: A comparison between kaolinite, illite and montmorillonite

This paper investigates the decomposition of three clayey structures (kaolinite, illite and montmorillonite) when thermally treated at 600 {sup o}C and 800 {sup o}C and the effect of this treatment on their pozzolanic activity in cementitious materials. Raw and calcined clay minerals were characterized by the XRF, XRD, {sup 27}Al NMR, DTG and BET techniques. Cement pastes and mortars were produced with a 30% substitution by calcined clay minerals. The pozzolanic activity and the degree of hydration of the clinker component were monitored on pastes using DTG and BSE-IA, respectively. Compressive strength and sorptivity properties were assessed on standard mortars. It was shown that kaolinite, due to the amount and location of OH groups in its structure, has a different decomposition process than illite or montmorillonite, which results in an important loss of crystallinity. This explains its enhanced pozzolanic activity compared to other calcined clay-cement blends.

36 MATERIALS SCIENCE↗

Biotechnological solutions for critical mineral recovery from unconventional feedstocks

Secure and sustainable metal recovery from unconventional feedstocks is needed to meet the mineral demands of energy, defense, and electronic technologies. Here, we highlight the potential to leverage nature’s ability to extract and differentiate metal ions in biotechnologies that could become the next generation of mining and refining. We describe bulk and trace processes and then discuss the advances and opportunities of two key bioprocesses: microbially mediated solubilization of metal ions from solid matrices (termed ‘bioleaching’) and bio-based separation of solubilized ions via selective adsorption to proteins. Both biotechnologies have advantages such as reduced energy input for leaching low-grade feedstocks and reduced organic solvent demand for separating ions with similar physiochemical properties but require more development for industrial scale recovery from unconventional feedstocks. Innovation in biological science and engineering may bring timely solutions to key challenges toward recovering critical minerals from unconventional feedstocks.

organic↗

Regulatory inhibition of biological tissue mineralization by calcium phosphate through post-nucleation shielding by fetuin-A

In vertebrates, insufficient availability of calcium and inorganic phosphate ions in extracellular fluids leads to loss of bone density and neuronal hyper-excitability. To counteract this problem, calcium ions are usually present at high concentrations throughout bodily fluids—at concentrations exceeding the saturation point. This condition leads to the opposite situation where unwanted mineral sedimentation may occur. Remarkably, ectopic or out-of-place sedimentation into soft tissues is rare, in spite of the thermodynamic driving factors. This fortunate fact is due to the presence of auto-regulatory proteins that are found in abundance in bodily fluids. Yet, many important inflammatory disorders such as atherosclerosis and osteoarthritis are associated with this undesired calcification. Hence, it is important to gain an understanding of the regulatory process and the conditions under which it can go awry. In this manuscript, we extend mean-field continuum classical nucleation theory of the growth of clusters to encompass surface shielding. We use this formulation to study the regulation of sedimentation of calcium phosphate salts in biological tissues through the mechanism of post-nuclear shielding of nascent mineral particles by binding proteins. We develop a mathematical description of this phenomenon using a countable system of hyperbolic partial differential equations. A critical concentration of regulatory protein is identified as a function of the physical parameters that describe the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Orson Anderson Era of Mineral Physics at Lamont in the 1960s

From 1964 to the early 1970s, Orson Anderson led a research program at the Lamont Geological Observatory in the newly-emerging field of “mineral physics”. In collaboration with colleagues Edward Schreiber and Naohiro Soga, Orson exploited the techniques of physical acoustics to study the behavior of the sound velocities of minerals at elevated pressures and temperatures. This research program also included semi-empirical studies of the relationships between the bulk modulus and the molar volume of solids, the use of lattice dynamics to calculate the elastic moduli of cubic structures as a function of pressure to predict instabilities, and theoretical investigations of the Lagrangian and Eulerian formulations of finite strain equations of state.

58 GEOSCIENCES↗

Effect of Particle Size on Raman Signal Strength of Silicate Minerals

Understanding the effects of particle size is necessary for quantifying minerals in mixtures using Raman spectroscopy. Raman signal intensity is evaluated using six common silicate minerals (two olivines, two pyroxenes, and two feldspars) at 10 particle size ranges. For olivines and feldspars, the highest peak intensities are observed in samples with 38–63 and 63–106 μm particle sizes. There is no such consistent trend for the pyroxene samples, although the overall low signal strength complicates those measurements. In conclusion, Raman spectra of samples with varying particle sizes appear to be influenced by two competing effects: scattering from particle boundaries and effective sampling volume.

58 GEOSCIENCES↗