Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Characterization of Ti{sub 1-x}Al{sub x}N coatings with selective IR reflectivity

Ti{sub 1-x}Al{sub x}N thin films were deposited by reactive magnetron sputtering. The obtained different stoichiometries give rise to different optical properties as the films change from metallic to dielectric. In this work the IR reflectivity of these coatings is investigated taking into account different application fields for IR selective Ti{sub 1-x}Al{sub x}N thin films. Low Al content coatings present high reflectivity, high absorptance and low thermal emittance. High Al compositions give raise to coatings with high absorptance and high thermal emittance. The composition of the coatings was evaluated combining electron energy loss spectroscopy (EELS) and energy dispersive spectroscopy. Scanning electron microscopy (SEM) revealed a columnar structure. Reflectance spectra for the visible and infrared spectral ranges were used to obtain the solar absorptance and thermal emittance values, used to calculate the equilibrium temperature of the coatings. The thermal stability in air from 300 to 600 C was also evaluated. (author)

14 SOLAR ENERGY↗

A pathway to synthesizing single-crystal Fe and FeCr films

Nuclear reactor environments provide a unique scientific and engineering challenge wherein materials must tolerate prolonged exposure to concurrent irradiation, elevated temperatures, and corrosive media. However, uncontrolled variability in material composition and structure often prohibits truly single-variable experiments that can reveal basic aspects of environmental damage. Here, Magnetron sputtering is used to provide a more controlled model system for these fundamental studies, yielding reproducible single-crystal Fe and FeCr thin films containing 8 and 18 at.% Cr. Electron microscopy is used to determine the systematic correlations between growth conditions and the resulting film microstructure and surface morphology. It is found that the substrate temperature and applied radio frequency (RF) bias can be tuned to obtain consistent homogeneous and single crystal films with a minimal amount of Ar impurities from the RF bias process. Epitaxial, single-crystal Fe films are obtained on MgO substrates at 500 °C with 10 Watt (W) RF bias deposition. However, when Cr is alloyed with Fe, higher substrate temperatures (600 °C) and applied RF biases (15 W) are required to achieve a similar epitaxial single-crystal FeCr film. Accelerated molecular dynamics simulations reveal that Cr impedes surface transport, explaining the need for higher temperature and bias during the growth of the Cr-bearing films.

36 MATERIALS SCIENCE↗

Nitrogen-incorporation induced changes in the microstructure of nanocrystalline WO3 thin films

Nitrogen doped tungsten oxide (WO3) films were grown by reactive magnetron sputter-deposition by varying the nitrogen content in the reactive gas mixture keeping the deposition temperature fixed at 400 C. The crystal structure, surface morphology, chemical composition, and electrical resistivity of nitrogen doped WO3 films were evaluated using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and electrical conductivity measurements. The results indicate that the nitrogen-doping induced changes in the microstructure and electrical properties of WO3 films are significant. XRD measurements coupled with SEM analysis indicates that the increasing nitrogen content decreases the grain size and crystal quality. The nitrogen concentration increases from 0 at.% to 1.35 at.% with increasing nitrogen flow rate from 0 to 20 sccm. The corresponding dc electrical conductivity of the films had shown a decreasing trend with increasing nitrogen content.

36 MATERIALS SCIENCE↗

Sputter deposition of high electrical resistivity Au-Ta alloy coatings on rotating substrates

Sputter deposition of gold-tantalum alloy coatings is a key process for manufacturing hohlraums for magnetically-assisted inertial confinement fusion implosions. In this report we describe direct current magnetron sputter deposition of ~ 10 - μ~ 10 - μm-thick films of Au-80 at.% Ta onto rotating sphero-cylindrical hohlraum and planar Si witness substrates. Emphasis is given to how film microstructure and properties are affected by main deposition parameters, including argon working gas pressure, substrate bias, and the source composition (a single alloyed target compared to co-sputtering from two elemental targets). Experimental findings are correlated with distributions of landing energies and incident angles of depositing species calculated by Monte Carlo simulations of ballistic collisions and gas phase atomic transport. Deposition conditions characterized by low energetics of depositing species favor the formation of a β-Ta-like phase. Implications of these results to hohlraum fabrication are discussed.

36 MATERIALS SCIENCE↗

Topochemical Synthesis and Electronic Structure of High-Crystallinity Infinite-Layer Nickelates on an Orthorhombic Substrate

Superconductivity in infinite-layer nickelates has stirred much research interest, to which questions regarding the nature of superconductivity remain elusive. A critical leap forward to address these intricate questions is through the growth of high-crystallinity infinite-layer nickelates, including the “parent” phase. Here, we report the synthesis of a high-quality thin-film nickelate, NdNiO 2 . This is achieved through the growth of a perovskite precursor phase (NdNiO 3 ) of superior crystallinity on the NdGaO 3 substrate by off-axis RF magnetron sputtering and a low-temperature topochemical reduction using NaH. We observe a nonlinear Hall effect at low temperatures in this “non-doped” phase. We further study the electronic properties using advanced X-ray scattering and first-principles calculations. We observe spectroscopic indications of the enhanced two-dimensionality and a reduced hybridization of Nd 5d and Ni 3d orbitals. These findings unlock new pathways for preparing high-quality infinite-layer nickelates and provide new insights into the intrinsic features of these compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrathin Ruthenium Films on Graphene Buffered SiO 2 via Quasi Van der Waals Epitaxy

In this study, we demonstrate a quasi van der Waals epitaxy approach to prepare single crystalline Ru ultrathin film on large scale, monolayer graphene. Physical and epitaxial properties of bulk, near surface and surface of ultrathin Ru films were comprehensively studied using various structural, morphological, compositional, and electrical characterization techniques. Here, we confirm that Ru can epitaxially grow on single, monolayer graphene using magnetron sputtering at elevated temperature of 600 °C. The epitaxial Ru films with film thickness ranging from 94.2 nm down to 3.9 nm show the (0001) out-of-plane orientation. The epitaxial relationships between Ru and graphene are out-of-plane Ru(0001) || graphene(0001) and in-plane Ru[$11\bar20$] || graphene[$11\bar20$]. All the Ru films show smooth surfaces with root-mean-square roughness less than 0.8 nm and have negligible oxide layer on the surfaces. The Ru films on graphene demonstrate significantly reduced electrical resistivity comparing to their counterpart grown on bare SiO 2 , which show polycrystalline nature. For 7.1 to 3.9 nm film thicknesses, the resistivity of Ru on graphene shows 38 to 45% resistivity decrease from that of Ru film on bare SiO 2 without graphene. Our observations suggest the existence of the above-classical van der Waals interaction between Ru and graphene. On the other hand, graphene is capable of effectively blocking the inter-diffusion/interaction between Ru and SiO 2 during a 1000 °C annealing process.

36 MATERIALS SCIENCE↗

Nano-Ceramic Cathodes via Co-sputtering of Gd–Ce Alloy and Lanthanum Strontium Cobaltite for Low-Temperature Thin-Film Solid Oxide Fuel Cells

We report the electrochemical performance and structural characteristics of porous nanostructured ceramic cathodes for thin-film solid oxide fuel cells (TF-SOFCs) based on yttria-stabilized zirconia (YSZ) electrolytes. The nanostructured cathode is obtained through magnetron co-sputtering of gadolinium–cerium (Gd–Ce) alloy and lanthanum strontium cobaltite perovskite targets. The resultant nanostructure and composition of the ceramic cathode are controlled by adjusting the co-sputtering conditions. The peak power densities in our fabricated TF-SOFCs are the highest reported values for YSZ-based electrolyte SOFCs, showing 0.14, 0.48, 1.21, 2.56, and 3.01 W/cm2 at 450, 500, 550, 600, and 650 °C, respectively, operating under air and pure hydrogen fuel. The results show that the porosity and composition of the cathode greatly affect the resulting peak power densities. This work illustrates the capability of sputtering to produce stable, scalable, nano-ceramic cathodes with superb peak power densities when integrated in TF-SOFCs.

25 ENERGY STORAGE↗

BETSI, a new test bench for ion sources optimization at CEA SACLAY

In the framework of several International HPPA projects (such as IFMIF, IPHI, and Spiral2) the CEA handles the design and the developments of several electron cyclotron resonance (ECR) ion sources. For the IFMIF EVEDA demonstrator, a 140 mA cw extracted deuteron beam will be required for high yield of neutron production. For radioactive ion production in the Spiral2 project, several milliamperes of deuterons will be delivered with a permanent magnet source. The optimization of the beam quality at the entrance of the radio frequency quadropole (RFQ) accelerator system triggered the need of a new test bench for ion source optimization and beam qualification. The BETSI ion source test bench will operate up to 50 kV and ignite cw or pulsed hydrogen plasma with a 2.45 GHz magnetron. Great care has already been taken to design electrostatic optics of the extraction system to minimize the emittance growth. Plasma diagnostics will be inserted in the source chamber and several beam diagnostics (emittance and current measurements, beam species analysis) will also be implemented on the low energy beam line transport (LEBT). These diagnostics allow the simultaneous analysis of the beam quality with the plasma parameters of the source. Regional funding request will also be needed to improve the LEBT for space charge compensation measurements. The design of the present and upgraded test bench will be reported as well as the first extracted beam analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The possible origin of RE-Fe-B thin films with c-axis texture

RE-Fe-B (RE-rare earth) films are prepared on a Nb buffer layer on thermally oxidized Si substrates by dc magnetron sputtering. The crystal structure, magnetic structure, and magnetic properties of RE-Fe-B films are studied. The results show that after annealing at 590 deg. C, the c-axis texture and perpendicular anisotropy of RE-Fe-B films increase strongly with the increase of deposition temperature from 300 to 470 deg. C. We suggest that the texture of the RE{sub 2}Fe{sub 14}B phase or the texture of the amorphous phase created in the first deposition process is a potential origin of the strong c-axis texture in the crystallized films.

36 MATERIALS SCIENCE↗

Fabrication, characterization, and the rectifying properties of the interfacial structural controlled LaSrMnO-Si heterojunctions

The La{sub 0.9}Sr{sub 0.1}MnO{sub 3}/Si p-n junctions with optimized rectifying properties were synthesized using radio frequency magnetron sputtering followed by an in situ annealing process at a series of temperatures. The thickness of the SiO{sub x} barrier layer d determines the rectifying properties of the heterojunctions by Id{sup 3}=constant (I is the rectifying current). The dead layer was determined to act as a semiconductor layer in the conduction process. The annealed samples show Mn{sup 4+} rich interface which correlated closely to the electrical transportation properties of the heterostructures. Lowering the annealing temperature, the electric sensitivity of the heterojunction can be significantly enhanced by simply tuning the thickness of the barrier layer.

36 MATERIALS SCIENCE↗

Magnetic properties and magnetic domains of Nd-Fe-B thin films

Anisotropic Nd-Fe-B thin films are fabricated by direct current magnetron sputtering on Si substrates heated to temperatures over a wide range. Surface morphology and magnetic domains of the Nd-Fe-B thin films prepared at different sputtering temperatures (25-600 deg. C) are observed by a scanning probe microscopy. The magnetic domains exhibit a rich variety of textures, changing from striped via maze to cloudlike as the sputtering temperature is increased. Variations in magnetic domains with substrate temperature are discussed using phase components and magnetic anisotropies of the thin films. In addition, patterns of magnetic domains are analyzed using the 'disorder functions', a set of characterizations of complex patterns with labyrinthine structures. The disorder function {delta}(1) and the structure factor {delta}k do not change appreciably until a substrate temperature of 350 deg. C, but increases significantly beyond 400 deg. C. The disorder in magnetic domains increases with increasing sputtering temperature. A simultaneous enhancement of the anisotropic c texture and the hard-magnetic properties of the thin films are observed. The significant change of the disorder function at T{sub s}=400 deg. C appears to be a precursor to the hardening of the Nd-Fe-B film. The most disordered magnetic domains of the film with the substrate temperature of 600 deg. C correspond to the optimum magnetic properties, with the maximum energy product (BH){sub max} of 22.4 MG Oe.

36 MATERIALS SCIENCE↗

The microstructure and electrical transport properties of immiscible copper-niobium alloy thin films

Mutually immiscible in the solid state, copper and niobium exhibit a relatively strong clustering (phase separating) tendency in the liquid state and can therefore only be alloyed in a highly metastable form: for example, by vapor quenching. We have deposited metastable Cu-Nb alloy thin films with nominal compositions ranging from 5 to 90 at. % Nb by magnetron cosputtering. The microstructure of these films depends strongly on the composition and ranges from coarse-grained solid solutions for Cu-rich and Nb-rich compositions to phase-separated amorphous mixtures when the two elements are in comparable amounts. The crystalline Cu- or Nb-rich compositions exhibit positive temperature coefficients of resistivity (TCR) with the Cu-90 at. % Nb film exhibiting a superconducting transition with (T{sub C}){sub onset}{approx}4.5 K. The amorphous films show high room temperature resistivity, a negative TCR, and composition dependent superconducting transitions. We investigate the relation between the microstructure, phase stability, and the electrical transport properties.

36 MATERIALS SCIENCE↗

Incorporation of nitrogen in Cr/Sc multilayers giving improved soft x-ray reflectivity

Soft x-ray reflectivity (SXR) of Cr/Sc multilayer with bilayer thickness of {lambda}=1.56 nm was increased by 100% by an intentional introduction of nitrogen during magnetron sputtering. Multilayers deposited at background pressures of {<=}2x10{sup -6} Torr exhibited amorphous layers with flat interfaces. At 2x10{sup -5} Torr, understoichiometric CrN{sub x}/ScN{sub y} multilayer with a nitrogen content of {approx}34 at. % was formed. CrN{sub x}/ScN{sub y} multilayer comprising of only 100 periods exhibited a SXR of 11.5%. X-ray and electron microscopy analyses showed that the improvement in performance is a result of reduced interfacial diffusion yielding interface widths of {<=}0.29 nm. The CrN{sub x}/ScN{sub y} multilayer exhibited thermal stability up to >380 deg. C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Carrier Concentration Tuning of Bandgap-Reduced p-Type ZnO Films by Co-Doping of Cu and Ga for Improving Photoelectrochemical Response

In this study, the synthesis of p-type ZnO films with similar bandgaps but varying carrier concentrations through codoping of Cu and Ga is reported. The ZnO:(Cu,Ga) films are synthesized by rf magnetron sputtering in O{sub 2} gas ambient at room temperature, followed by postdeposition annealing at 500 C in air for 2 h. The bandgap reduction and p-type conductivity are caused by the incorporation of Cu. The tuning of carrier concentration is realized by varying the Ga concentration. The carrier concentration tuning does not significantly change the bandgap and crystallinity. However, it can optimize the carrier concentration to significantly enhance the photoelectrochemical response for bandgap-reduced p-type ZnO thin films.

14 SOLAR ENERGY↗

Titanium Carbides Coatings for Wear Resistant Biomedical Devices: Manufacturing and Modeling

Deposition of Titanium Carbide coatings on Ti6Al4V substrate, through the reactive magnetron sputtering technique is here presented. The mechanical characterization of the coatings has been carried out through a set of indentation tests at different maximum applied loads. The elastic stiffness as well as the hardness of the coating-substrate system indicate that these coatings are suitable candidates for wear resistance applications in the orthopaedic field. Numerical simulation of the indentation tests allowed the identification of the constitutive parameters of the titanium carbide. Good agreement was achieved between experimental and numerical results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stable microwave coaxial cavity plasma system at atmospheric pressure

We present a systematic study of the development of a novel atmospheric microwave plasma system for material processing in the pressure range up to 760 torr and the microwave input power up to 6 kW. Atmospheric microwave plasma was reliably produced and sustained by using a cylindrical resonator with the TM{sub 011} cavity mode. The applicator and the microwave cavity, which is a cylindrical resonator, are carefully designed and optimized with the time dependent finite element Maxwell equation solver. The azimuthal apertures are placed at the maximum magnetic field positions between the cavity and the applicator to maximize the coupling efficiency into the microwave plasma at a resonant frequency of 2.45 GHz. The system consists of a magnetron power supply, a circulator, a directional coupler, a three-stub tuner, a dummy load, a coaxial cavity, and a central cavity. Design and construction of the resonant structures and diagnostics of atmospheric plasma using optical experiments are discussed in various ranges of pressure and microwave input power for different types of gases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sensitized erbium emission from silicon-rich nitride/silicon superlattice structures

Erbium-doped silicon-rich nitride/silicon superlattice structures were fabricated by direct magnetron cosputtering deposition on Si substrates. Rapid thermal annealing resulted in the nucleation of small amorphous Si clusters, which efficiently sensitize 1.54 {mu}m emission via a nanosecond-fast nonresonant energy transfer process, providing an alternative route toward the fabrication of Si-compatible devices based on Er sensitization.

36 MATERIALS SCIENCE↗