Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Laser Annealing of Thin ITO Films on Flexible Organic Substrates

Indium–tin oxide (ITO) thin films on polyethylene-terephthalate film substrates are fabricated at room temperature by reactive magnetron sputtering. The minimum of the resistivity of ITO films formed at room temperature is 4.5 × 10 -4 Ω cm. The laser annealing of ITO films from 140 to 600 nm in thickness increases their conductivity from 10 to 24% depending on the energy density to the film and irradiation dose. It is established that the laser annealing of films up to 250 nm in thickness is efficient at an energy density in the range from 12 to 35 mJ/cm 2 . Films from 390 to 600 nm in thickness should be annealed by laser radiation with an energy density of no lower than 46 mJ/cm 2 . A model problem taking into account the influence of radiative cooling and heat exchange of the film and the substrate on the variation in the film temperature over time during laser annealing is considered. A one-dimensional thermal conductivity equation for a bilayer medium is used. The maximal stresses in the ITO film under various annealing modes are calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Infrared optical properties of amorphous and nanocrystalline Ta{sub 2}O{sub 5} thin films

The optical constants of tantalum pentoxide (Ta{sub 2}O{sub 5}) are determined in a broad spectral region from the visible to the far infrared. Ta{sub 2}O{sub 5} films of various thicknesses from approximately 170 to 1600 nm are deposited using reactive magnetron sputtering on Si substrates. X-ray diffraction shows that the as-deposited films are amorphous, and annealing in air at 800 °C results in the formation of nanocrystalline Ta{sub 2}O{sub 5}. Ellipsometry is used to obtain the dispersion in the visible and near-infrared. Two Fourier-transform infrared spectrometers are used to measure the transmittance and reflectance at wavelengths from 1 to 1000 μm. The surface topography and microstructure of the samples are examined using atomic force microscopy, confocal microscopy, and scanning electron microscopy. Classical Lorentz oscillators are employed to model the absorption bands due to phonons and impurities. A simple model is introduced to account for light scattering in the annealed films, which contain micro-cracks. For the unannealed samples, an effective-medium approximation is used to take into account the adsorbed moisture in the film and a Drude free-electron term is also added to model the broad background absorption.

36 MATERIALS SCIENCE↗

Epitaxial Ni{sub 3}FeN thin films: A candidate for spintronic devices and magnetic sensors

A new type of epitaxial ferromagnetic nitride (Ni{sub 3} Fe N = permalloy nitride = 'PyN') compound films were grown on Al{sub 2}O{sub 3}(1120) substrates using reactive triode magnetron sputtering. The results of electron back-scattering diffraction and x-ray diffraction techniques indicate a high quality epitaxial crystalline structure with growth normal of (100). Magnetization measurements of epitaxial PyN films revealed several unique results. (1) A textbook square hysteresis loop that suggest existence of single magnetic domain in these films. (2) A coercive field is tunable from a few mOe up to a few Oe by changing the film thickness. (3) A magnetization that switches (rotate) over a very small field range of {delta}H{sub C} {<=} 0.05 Oe, independent of the film thickness. This small {delta}H indicates a very large resistive sensitivity ({delta}R/{delta}H) of the epitaxial PyN. (4) The epitaxial PyN thermal cycling through several cycles between '2 and 800 K' (-271 Degree-Sign C to +527 Degree-Sign C) shows much less degradation only about 2-5% compared to 40% degradation of a simple Py film. Four-probe transport measurements give an anisotropic magnetoresistance of Almost-Equal-To 6%, sufficiently higher than other known ferromagnetic materials. These interesting properties are ideal for a variety of spintronic devices and magnetic sensors.

36 MATERIALS SCIENCE↗

Magnetization reversal in CoPt(111) hard/soft bilayers

The magnetization reversal in magnetron sputtered CoPt(111) hard/soft bilayers has been studied by polarized neutron reflectometry and magnetization measurements. The stability of the hard layer is tuned by the heat-treatment conditions which are used to crystallize the chemically ordered, high anisotropy, L{sub 1}0 phase. All the samples show the same features in their first order reversal curves but the lateral domain size during the magnetization reversal of the soft layer differs. In samples with strong intergrain coupling it exceeds the coherence length of the neutron beam, resulting in spin-flip scattering. In contrast, the hard layer reversal occurs through the reorientation in small domains.

36 MATERIALS SCIENCE↗

Hillock formation in co-deposited thin films of immiscible metal alloy systems

Hillocks are protruding sections of a surface that can influence the electronic and mechanical properties of a thin film. In monolithic films, these hillocks are formed due to thermally induced stress gradients during deposition. In this study, the surface morphology of co-sputtered immiscible Cu-X (X is a body centered cubic (BCC) group V or VI metal) thin films is characterized to elucidate the conditions that lead to hillock formation. Cu-Ta and Cu-Mo-Ag films were co-deposited with physical vapor deposition (PVD) magnetron sputtering at 25, 400, 600, and 800°C. A significant number of homogeneously distributed surface hillocks were observed only in the 600 and 800°C films. High-angle annular dark field (HAADF) cross-sectional imaging revealed significant Cu agglomerations underneath the protruding features. For the Cu-Ta films, the Cu was enveloped in a Cu-Ta nanocrystalline matrix. For Cu-Mo-Ag, the Cu was surrounded by Mo-Ag concentration modulations. While thermal stress gradients arise during deposition of immiscible metal films, biaxial stress calculations and literature cases reveal that they are not solely responsible for hillock formation. The observed morphologies align with a surface diffusion kinetic model that evaluates diffusion length of adatoms during deposition as a function of deposition temperature. Finally, this indicates a phase separation driving force paired with the constituent elements’ dissimilar mobilities at elevated deposition temperatures contribute to the presence of hillocks.

36 MATERIALS SCIENCE↗

Intrinsic stress in ZrN thin films: Evaluation of grain boundary contribution from in situ wafer curvature and ex situ x-ray diffraction techniques

Low-mobility materials, like transition metal nitrides, usually undergo large residual stress when sputter-deposited as thin films. While the origin of stress development has been an active area of research for high-mobility materials, atomistic processes are less understood for low-mobility systems. In the present work, the contribution of grain boundary to intrinsic stress in reactively magnetron-sputtered ZrN films is evaluated by combining in situ wafer curvature measurements, providing information on the overall biaxial stress, and ex situ x-ray diffraction, giving information on elastic strain (and related stress) inside crystallites. The thermal stress contribution was also determined from the in situ stress evolution during cooling down, after deposition was stopped. The stress data are correlated with variations in film microstructure and growth energetics, in the 0.13-0.42 Pa working pressure range investigated, and discussed based on existing stress models. At low pressure (high energetic bombardment conditions), a large compressive stress is observed due to atomic peening, which induces defects inside crystallites but also promotes incorporation of excess atoms in the grain boundary. Above 0.3-0.4 Pa, the adatom surface mobility is reduced, leading to the build-up of tensile stress resulting from attractive forces between under-dense neighbouring column boundary and possible void formation, while crystallites can still remain under compressive stress.

36 MATERIALS SCIENCE↗

Electron/phonon coupling in group-IV transition-metal and rare-earth nitrides

Transport electron/phonon coupling parameters and Eliashberg spectral functions α{sub tr}{sup 2}F(ℏω) are determined for group-IV transition-metal (TM) nitrides TiN, ZrN, and HfN, and the rare-earth (RE) nitride CeN using an inversion procedure based upon temperature-dependent (4 < T < 300 K) resistivity measurements of high-crystalline-quality stoichiometric epitaxial films grown on MgO(001) by magnetically-unbalanced reactive magnetron sputtering. Transport electron/phonon coupling parameters λ{sub tr} vary from 1.11 for ZrN to 0.82 for HfN, 0.73 for TiN, and 0.44 for CeN. The small variation in λ{sub tr} among the TM nitrides and the weak coupling in CeN are consistent with measured superconducting transition temperatures 10.4 (ZrN), 9.18 (HfN), 5.35 (TiN), and <4 K for CeN. The Eliashberg spectral function describes the strength and energy spectrum of electron/phonon coupling in conventional superconductors. Spectral peaks in α{sup 2}F(ℏω), corresponding to regions in energy-space for which electrons couple to acoustic ℏω{sub ac} and optical ℏω{sub op} phonon modes, are centered at ℏω{sub ac} = 33 and ℏω{sub op} = 57 meV for TiN, 25 and 60 meV for ZrN, 18 and 64 meV for HfN, and 21 and 39 meV for CeN. The acoustic modes soften with increasing cation mass; optical mode energies remain approximately constant for the TM nitrides, but are significantly lower for the RE nitride due to a lower interatomic force constant. Optical/acoustic peak-intensity ratios are 1.15 ± 0.1 for all four nitrides, indicating similar electron/phonon coupling strengths α{sub tr}(ℏω) for both modes.

36 MATERIALS SCIENCE↗

Study of the recombination process at crystallite boundaries in CuIn{sub 1-x}Ga{sub x}Se{sub 2} (CIGS) films by microwave photoconductivity

The loss kinetics of photogenerated charge carriers in thin polycrystalline chalcopyrite CuIn{sub 1-x}Ga{sub x}Se{sub 2} (CIGS) films has been studied by microwave photoconductivity (at 36 GHz). The films were synthesized using the ampoule method and three variants of physical vapor deposition with subsequent selenization: magnetron sputtering, thermal deposition, and modified thermal deposition with intermetallic precursors. The photoconductivity was excited by 8-ns nitrogen laser pulses with maximum intensity of 4 Multiplication-Sign 10{sup 14} photons/cm per pulse. Measurements were performed in the temperature range 148-293 K. The photoresponse amplitude is found to depend linearly on the sizes of coherent-scattering regions in the film grains, which were calculated from X-ray diffraction data. The photoresponse decay obeys hyperbolic law. The photoresponse half-decay time increases with a decrease in both temperature and light intensity. It is shown that the recombination of free holes with trapped electrons is very efficient near the crystallite boundaries.

36 MATERIALS SCIENCE↗

Growth temperature-dependent metal–insulator transition of vanadium dioxide epitaxial films on perovskite strontium titanate (111) single crystals

Vanadium dioxide (VO{sub 2}) epitaxial films were grown on perovskite single-crystal strontium titanate (SrTiO{sub 3}) substrates by reactive radio-frequency magnetron sputtering. The growth temperature-dependent metal–insulator transition (MIT) behavior of the VO{sub 2} epitaxial films was then investigated. We found that the order of magnitude of resistance change across the MIT increased from 10{sup 2} to 10{sup 4} with increasing growth temperature. In contrast, the temperature of the MIT does not strongly depend on the growth temperature and is fairly stable at about 345 K. On one hand, the increasing magnitude of the MIT is attributed to the better crystallinity and thus larger grain size in the (010)-VO{sub 2}/(111)-SrTiO{sub 3} epitaxial films at elevated temperature. On the other hand, the strain states do not change in the VO{sub 2} films deposited at various temperatures, resulting in stable V-V chains and V-O bonds in the VO{sub 2} epitaxial films. The accompanied orbital occupancy near the Fermi level is also constant and thus the MIT temperatures of VO{sub 2} films deposited at various temperatures are nearly the same. This work demonstrates that high-quality VO{sub 2} can be grown on perovskite substrates, showing potential for integration into oxide heterostructures and superlattices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Top-emission Si-based phosphor organic light emitting diode with Au doped ultrathin n-Si film anode and bottom Al mirror

We report a highly efficient top-emission Si-based phosphor organic light emitting diode (PhOLED) with an ultrathin polycrystalline n-Si:Au film anode and a bottom Al mirror. This anode is formed by magnetron sputtering followed by Ni induced crystallization and then Au diffusion. By optimizing the thickness of the n-Si:Au film anode, the Au diffusion temperature, and the other parameters of the PhOLED, the highest current and power efficiencies of the n-Si:Au film anode PhOLED reached 85{+-}9 cd/A and 80{+-}8 lm/W, respectively, corresponding to an external quantum efficiency of 21{+-}2% and a power conversion efficiency of 15{+-}2%, respectively, which are about 60% and 110% higher than those of the indium tin oxide anode counterpart and 70% and 50% higher than those of the bulk n{sup +}-Si:Au anode counterpart, respectively.

36 MATERIALS SCIENCE↗

Colored hard coatings with AlN–TiN multilayer structures

AlN–TiN multilayer structures can be used to extend the color gamut of hard coatings while maintaining good hardness and corrosion resistance. This study used reactive magnetron sputtering on a glass substrate to produce coatings with a microhardness of 19 GPa as well as optical reflectance exceeding 80% and controllable saturation (chroma) for various hues of red, yellow, green, blue, and purple. The authors characterized the complex index of refraction of the TiN films using ellipsometry; the real refractive indices of the AlN films were derived from the reflectance values obtained using photometry. Finally, the colors of the samples were quantified using CIE-1931 chromaticity coordinates in the L*a*b* color space, and the microhardness of the films was measured using a nanoindenter. Simulation results using a multiple-beam-interference recursive method presented good consistency with experimental measurements with regard to the optical reflective spectra of AlN–TiN multilayer thin film samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heat- and radiation-resistant contacts to SiC made on the basis of quasi-amorphous ZrB{sub 2} films

The radiation and thermal stability of the Schottky-barrier structures deposited by the magnetron sputtering of zirconium diboride onto the (0001) face of the Lely-grown n-6H(15R)SiC single crystals with the uncompensated-donor concentration of {approx}10{sup 18} cm{sup -3} was investigated by the methods of the I-V and C-V characteristics combined with the layer-by-layer Auger analysis. It is shown that the use of quasi-amorphous ZrB{sub 2} films when manufacturing contacts on n-6H(15R)SiC leads to no changes in the Schottky-barrier characteristics during rapid thermal annealing to 800 deg. C in the range of {sup 60}Co {gamma}-ray irradiation doses of 10{sup 3}-10{sup 7} Gy.

36 MATERIALS SCIENCE↗

High performance AlScN thin film based surface acoustic wave devices with large electromechanical coupling coefficient

AlN and AlScN thin films with 27% scandium (Sc) were synthesized by DC magnetron sputtering deposition and used to fabricate surface acoustic wave (SAW) devices. Compared with AlN-based devices, the AlScN SAW devices exhibit much better transmission properties. Scandium doping results in electromechanical coupling coefficient, K{sup 2}, in the range of 2.0% ∼ 2.2% for a wide normalized thickness range, more than a 300% increase compared to that of AlN-based SAW devices, thus demonstrating the potential applications of AlScN in high frequency resonators, sensors, and high efficiency energy harvesting devices. The coupling coefficients of the present AlScN based SAW devices are much higher than that of the theoretical calculation based on some assumptions for AlScN piezoelectric material properties, implying there is a need for in-depth investigations on the material properties of AlScN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large coercivity and exchange bias in [Fe{sub 1-{delta}}(FeO){sub {delta}}]{sub x}(TiO{sub 2}){sub 1-x} granular films

[Fe{sub 1-{delta}}(FeO){sub {delta}}]{sub x}(TiO{sub 2}){sub 1-x} (0{<=}{delta}{<=}0.91, 0.34{<=}x{<=}0.54) granular films were fabricated by magnetron sputtering. Large coercivity (H{sub C} = 10.5 kOe) and exchange-bias-field (H{sub E} = 6.5 kOe) at 5 K were found in the film with {delta}=0.84 and x = 0.48. AC susceptibility measurements exhibit a frequency (f) dependent peak T{sub f} in the in-phase susceptibility curve. The fitting of the relation of T{sub f} vs f with both the Vogel-Fulcher law and critical slowing down theory indicate that the evident enhancement of the H{sub C} and H{sub E} can be qualitatively ascribed to the existence of cluster-spin glass state. The results may help to deeply understand the origin of exchange bias and related effects.

36 MATERIALS SCIENCE↗

The New ESRF Multilayer Facility: Progress and Perspectives

In view of the increasing need for high quality multilayer based x-ray optics the ESRF decided to upgrade its multilayer facility. During the last years a new deposition system was designed, installed, and commissioned. Since 2008 the new laboratory is operational and has produced its first optical elements for ESRF beamlines. The deposition system is based on magnetron sputtering and can cover optical surfaces up to 1000x150 mm{sup 2} with uniform or graded coatings. Four cathodes allow the use of conducting, insulating, and ferromagnetic target materials. This work will provide an overview on the machine conception and its overall performance, including a comparison with the formerly used system. It will be complemented by first fabrication results and perspectives for future projects in the framework of the ESRF Upgrade Programme.

43 PARTICLE ACCELERATORS↗

Cu diffusion in single-crystal and polycrystalline TiN barrier layers: A high-resolution experimental study supported by first-principles calculations

Dense single-crystal and polycrystalline TiN/Cu stacks were prepared by unbalanced DC magnetron sputter deposition at a substrate temperature of 700 °C and a pulsed bias potential of −100 V. The microstructural variation was achieved by using two different substrate materials, MgO(001) and thermally oxidized Si(001), respectively. Subsequently, the stacks were subjected to isothermal annealing treatments at 900 °C for 1 h in high vacuum to induce the diffusion of Cu into the TiN. The performance of the TiN diffusion barrier layers was evaluated by cross-sectional transmission electron microscopy in combination with energy-dispersive X-ray spectrometry mapping and atom probe tomography. No Cu penetration was evident in the single-crystal stack up to annealing temperatures of 900 °C, due to the low density of line and planar defects in single-crystal TiN. However, at higher annealing temperatures when diffusion becomes more prominent, density-functional theory calculations predict a stoichiometry-dependent atomic diffusion mechanism of Cu in bulk TiN, with Cu diffusing on the N sublattice for the experimental N/Ti ratio. In comparison, localized diffusion of Cu along grain boundaries in the columnar polycrystalline TiN barriers was detected after the annealing treatment. The maximum observed diffusion length was approximately 30 nm, yielding a grain boundary diffusion coefficient of the order of 10{sup −16} cm{sup 2} s{sup −1} at 900 °C. This is 10 to 100 times less than for comparable underdense polycrystalline TiN coatings deposited without external substrate heating or bias potential. The combined numerical and experimental approach presented in this paper enables the contrasting juxtaposition of diffusion phenomena and mechanisms in two TiN coatings, which differ from each other only in the presence of grain boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Some Physical Properties of the New Intermetallic Compound NbCd{sub 2}

Solid solutions of cadmium in niobium and NbCd{sub 2} phase are formed by magnetron sputtering and coprecipitation on substrates moving relative to the flow of Nb and Cd particles. The NbCd{sub 2} phase can be described by a tetragonal unit cell with the parameters a = 0.84357 nm, c = 0.54514 nm, and c/a = 0.6426. A very high hole concentration in NbCd{sub 2} is established by studying the coating absorption and transmission spectra corresponding to the intermetallic-compound composition near the fundamental absorption edge, determining the band gap, and measuring the carrier mobility. Such a concentration is characteristic of a strongly degenerate semiconductor or metal. The band gap is determined to be 1.26 eV. The variation in the concentration of carriers and their mobility depending on the cadmium concentration in coatings of the Nb–Cd system confirms the occurrence of the NbCd{sub 2} phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature Dependent Thermal Conductivity of Si/SiC Amorphous Multilayer Films

The cross-plane thermal conductivity of 22 nm period Si/SiC amorphous multilayer films deposited by magnetron sputtering and measured using a differential 3{omega} method was found to decrease from 2.0 W/mK at 300 K to 1.1 W/mK at 80 K. Structural disorder in each of the constituent layers of the amorphous multilayer films was confirmed by high resolution transmission electron microscopy. Estimations of the relative contributions of interface and intrinsic layer thermal resistance based on microscopic phonon transport models indicate that mean free path reductions induced by the structural disorder within the multilayer films are responsible for the observed experimental trends.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗