Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNESIUM COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Metal-organic frameworks based on magnesium(II): adsorption and luminescence properties

Two new metal-organic frameworks based on magnesium(II) ions, [Mg{sub 4}(bdc){sub 3}(dma){sub 6}(NO{sub 3}){sub 2}]•DMA (1; bdc is 1,4-benzenedicarboxylate; dma, DMA is N,N-dimethylacetamide) and [Mg{sub 3}(bpdc){sub 3}(nmp){sub 4}] (2; bpdc is 4,4´-biphenyldicarboxylate; nmp is N-methylpyrrolidone), were synthesized in DMA or NMP, respectively. According to the single-crystal X-ray diffraction data, compound 1 is built of binuclear carboxylate units {Mg_2(O_2CR)_3}, which were previously not observed in metal-organic frameworks. Compound 2 is based on trinuclear carb oxylate units {Mg_3(O_2CR)_6}. Compound 1 has a layered structure (hcb topology), whereas compound 2 has a distorted three-dimensional cubic structure (pcu topology). The phase purity and chemical identity of the compounds were confirmed by IR spectroscopy, thermogravimetry, elemental analysis, and powder X-ray diffraction. Photoluminescence properties of both compounds are indicative of intraligand charge-transfer transitions of one (for 1) or two (for 2) types. Textural characteristics of an activated sample of 1 were measured by nitrogen and hydrogen adsorption at 77 K and by carbon dioxide adsorption at 195 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Samarium Nitride Thin Films on Magnesium Oxide (001) Substrates Using Molecular Beam Epitaxy

Rare-earth nitrides are an exciting family of materials with a wide variety of properties desirable for new physics and applications in spintronics and superconducting devices. Among them, samarium nitride is an interesting compound reported to have ferromagnetic behavior coupled with the potential existence of p-wave superconductivity. Synthesis of high-quality thin films is essential in order to manifest these behaviors and understand the impact that vacancies, structural distortions, and doping can have on these properties. In this study, we report the synthesis of samarium nitride monocrystalline thin films on magnesium oxide (001) substrates with a chromium nitride capping layer using molecular beam epitaxy (MBE). We observed a high-quality monocrystalline SmN film with matching orientation to the substrate, then optimized the growth temperature. Despite the initial 2 nm of growth showing formation of a potential samarium oxide layer, the subsequent layers showed high-quality SmN, with semiconducting behavior revealed by an increase in resistivity with decreasing temperature. These promising results highlight the importance of studying diverse heteroepitaxial schemes and open the door for integration of rare-earth nitrides and transition metal nitrides for future spintronic devices.

36 MATERIALS SCIENCE↗

Wetting Behavior of Calcium Ferrite Slags on Cristobalite Substrates

Calcium ferrite (CF) is a significant intermediate adhesive phase in high-basicity sinters. The wettability between calcium ferrite (CF) and gangue plays an important role in the assimilation process. The wettability of CF-based slags, in which a constant amount (2 mass pct.) of Al{sub 2}O{sub 3}, MgO, SiO{sub 2}, and TiO{sub 2} was added, on solid SiO{sub 2} (cristobalite) substrates at 1523 K (1250 °C) was investigated. The interfacial microstructure and spreading mechanisms were discussed for each sample. All the tested slag samples exhibited good wettability on the SiO{sub 2} substrate. The initial apparent contact angles were in the range of 20 to 50 deg, while the final apparent contact angles were ~ 5 deg. The wetting process could be divided into three stages on the basis of the change in diameter, namely the “linear spreading” stage, “spreading rate reduction” stage, and “wetting equilibrium” stage. It was found that the CF-SiO{sub 2} wetting system exhibits dissolutive wetting and the dissolution of SiO{sub 2} into slag influences its spreading process. The spreading rate increases with a decrease in the ratio of viscosity to interfacial tension, which is a result of the addition of Al{sub 2}O{sub 3}, MgO, SiO{sub 2}, and TiO{sub 2}. After cooling, a deep corrosion pit was formed in the substrate and a diffusion layer was generated in front of the residual slag zone; further, some SiO{sub 2} and Fe{sub 2}O{sub 3} solid solutions precipitated in the slag.

36 MATERIALS SCIENCE↗

Effect of Minor Yttrium on Microstructure and Mechanical Properties of Bioimplant Mg-5Zn Alloy

This paper explores cast Mg-5Zn alloy, containing small amounts of yttrium (Y: 0.1-1.5 wt.%), through microstructure evaluation and tensile and hardness tests. The results reveal that addition of Y to the alloy refines microstructure, especially when secondary phases, Mg{sub 3}Zn{sub 6}Y (I) and Mg{sub 3}Zn{sub 3}Y{sub 2} (W), form. I-phase is detected when 0.3 wt.% Y is added to the alloy, while W-phase is only observed in Mg-5Zn-1.5Y alloy. The results also show that the addition of Y improves yield and tensile strength as well as the hardness value of the Mg-5Zn alloy at the expense of its formability. The three effects of the solid solution of Y in α-Mg, grain refinement, and the formation of I- and W-phases are the reasons for such behavior. The improvement is more pronounced when W-phase appears in the microstructure. In other words, Mg-5Zn-1.5Y alloy behaves stronger and harder than other alloys and may be considered as a potential candidate for bioimplant applications if its degradation behavior meets the requirements.

36 MATERIALS SCIENCE↗

Co/Mg/X Multilayer Mirrors For the EUV Range

A new material combination namely Co/Mg multilayer designed for optics applications in the EUV range, is reported. Simulations show that reflectivity value of the Co/Mg multilayer can reach a reflectivity of 55% at 25.2 nm (49.2 eV), when the grazing incidence angle is set to 45 deg. and s polarization is considered. The introduction of additional materials, e.g., Y and Zr can improve the reflectivity to 61%. Co/Mg and Co/Mg/B{sub 4}C multilayers have been deposited following the parameters deduced from the simulations. The introduction of a B{sub 4}C barrier layer would in principle increase the multilayer reflectivity to 61%. In fact the reflectivity measurements at 0.154 nm show that the introduction of B{sub 4}C does not improve the structural quality of the multilayers.

36 MATERIALS SCIENCE↗

High Temperature Decomposition of Almandine and Pyrope in Reducing Atmosphere

Thermal decomposition of two garnets of near end-member composition--almandine (Fe{sub 2.85}Mg{sub 0.15})(Al{sub 1.99})Si{sub 2.99}O{sub 12} and pyrope (Mg{sub 2.22}Fe{sub 0.47}Ca{sub 0.33})(Cr{sub 0.11}Fe{sub 0.06}Al{sub 1.81})Si{sub 2.98}O{sub 12}--has been carried out in reducing atmosphere (forming gas: 10% of H{sub 2} in N{sub 2}). High-temperature behavior of both samples was monitored using simultaneous thermogravimetry and differential scanning calorimetry. The decomposition of almandine and pyrope turned out to proceed at slightly different temperatures above 1000 degree sign C. Therefore, two series of samples were prepared based on the results of thermal analysis: almandine heated up to 950 deg. C, 1070 deg. C and 1200 deg. C, and pyrope heated up to 1000 deg. C, 1100 deg. C, 1125 deg. C and 1200 deg. C. The identification of the decomposition products was performed by X-ray powder diffraction and Moessbauer spectroscopy. The common feature of the decomposition of both garnets is the presence of metallic iron and spinel phase, while the other products include fayalite, cristobalite, and cordierite for almandine; and enstatite and anorthite for pyrope. The formation of this last component was enabled due to Ca content in pyrope.

36 MATERIALS SCIENCE↗

Magnetization reversal induced by in-plane current in Ta/CoFeB/MgO structures with perpendicular magnetic easy axis

We investigate in-plane current-induced magnetization reversal under an in-plane magnetic field in Hall bar shaped devices composed of Ta/CoFeB/MgO structures with perpendicular magnetic easy axis. The observed relationship between the directions of current and magnetization switching and Ta thickness dependence of magnetization switching current are accordance with those for magnetization reversal by spin transfer torque originated from the spin Hall effect in the Ta layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly constrained ferroelectric [BaTiO{sub 3}]{sub (1−x)Λ}/[BaZrO{sub 3}]{sub xΛ} superlattices: X-ray diffraction and Raman spectroscopy

We report an x-ray diffraction (XRD) and a Raman-scattering investigation of ferroelectric/paraelectric superlattices [BaTiO{sub 3}] {sub (1−x)Λ}/[BaZrO{sub 3}]{sub xΛ} for which the composition varied, 0.15 ≤ x ≤ 0.85, while the superlattice (SL) modulation period Λ was kept constant at about 100 Å. The samples were epitaxially grown by pulsed laser deposition on MgO substrates buffered with La{sub 0.5}Sr{sub 0.5}CoO{sub 3}. Based on the XRD analysis and on polarized Raman spectra, we have showed that the large strain in SLs induced ferroelectricity in BaZrO{sub 3} (BZ) for all SLs, a material that is paraelectric in the bulk form at any temperature and in the single film. The induced polar axis in BZ layers is perpendicular to the plane of substrate while BaTiO{sub 3} (BT) layers exhibit in-plane polar orientation. Raman spectroscopy revealed a lattice ordering in SLs due to the misfit strain generated by the large lattice mismatch between the alternating BZ and BT layers. This strain induced a huge upward frequency of the lowest E(1TO) soft mode from 60 cm{sup −1} in the BT single film to 215 cm{sup −1} in the SL with x = 0.85. These results show that in spite of relatively large periodicity of SLs, they are highly constrained and the variation of BZ ratio allowed modifying strains between layers. The temperature dependence of the Raman spectra for BT{sub 0.3Λ}/BZ{sub 0.7Λ} and BT{sub 0.7Λ}/BZ{sub 0.3Λ} samples revealed giant shift of the ferroelectric phase transition. The phase transition temperature was found to be upshifted by about 300 °C with respect to BT single crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulation of electric-field and spin-transfer-torque induced magnetization switching in perpendicular magnetic tunnel junctions

Macrospin simulations are performed to model the magnetization switching driven by the combined action of electric-field and spin-polarized electric current (spin-transfer torque; STT) in MgO/CoFeB based magnetic tunnel junctions with interfacial perpendicular magnetic anisotropy. The results indicate that at low current case, the free layer magnetization shows a fast toggle-like switching, the final parallel or antiparallel magnetization state is determined by the electric-field effect, and the STT just helps or resists it to reach the final state depending on the current direction. However, with the increase of current strength, the contribution of STT effect gradually increases, which eventually achieves a deterministic magnetization switching state. Simulations further demonstrate that by appropriately tuning the parameters of applied electric-field and current the power consumption can be easily reduced by two orders of magnitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The synthesis and hydration of ternesite, Ca5(SiO4)2SO4

The hydration and strength evolution of two multi-phase ternesite-based cements with 15 and 29 wt% ternesite are reported. The synthesis and hydration properties of single phase ternesite, nominally Ca{sub 5}(SiO{sub 4}){sub 2}SO{sub 4}, are also reported including both chemically-pure ternesite and preparations doped with sodium, potassium, phosphorous, magnesium, manganese, strontium, zinc and titanium oxides. Hydration of the samples at 25 °C was studied by calorimetry and quantitative X-ray diffraction. Unconfined compressive strength development was determined for up to 1 year. Single-phase chemically activated ternesite hydrated rapidly at 25 °C achieved compressive strengths of ≈30 and ≈65 MPa at 28 and 90 days respectively, with C-S-H and gypsum as hydration products. The multi-phase ternesite-based cements reached 7 day strengths of ≈30 MPa. It is concluded that ternesite reacts with water, exhibiting strength gain. The future of calcium sulfoaluminate and sulfosilicate cements is discussed and it is suggested that a considerable, and as yet unrealised scope exists for simultaneously optimising cementing properties while lowering production costs and reducing CO{sub 2} emissions.

36 MATERIALS SCIENCE↗

Carboxylic and dicarboxylic acids extracted from crushed magnesium oxide single crystals

Carboxylic and dicarboxylic acids (glycolic, oxalic, malonic and succinic) have been extracted with tetrahydrofuran (THF) and H2O from large synthetic MgO crystals, crushed to a medium fine powder. The extracts were characterized by infrared spectroscopy and 1H-NMR. The THF extracts were derivatized with tert-butyldimethylsilyl (t-BDMS) for GC-MS analysis. A single crystal separated from the extract was used for an x-ray structure analysis, giving the monoclinic unit cell, space group P21/c with ao = 5.543 A, bo = 8.845 A, co = 5.086 A, and beta = 91.9 degrees, consistent with beta-succinic acid, HOOC(CH2)COOH. The amount of extracted acids is estimated to be of the order of 0.1 to 0.5 mg g-1 MgO. The MgO crystals from which these organic acids were extracted grew from the 2860 degrees C hot melt, saturated with CO/CO2 and H2O, thereby incorporating small amounts of the gaseous components to form a solid solution (ss) with MgO. Upon cooling, the ss becomes supersaturated, causing solute carbon and other solute species to segregate not only to the surface but also internally, to dislocations and subgrain boundaries. The organic acids extracted from the MgO crystals after crushing appear to derive from these segregated solutes that formed C-C, C-H and C-O bonds along dislocations and other defects in the MgO structure, leading to entities that can generically be described as (HxCyOz)n-. The processes underlying the formation of these precursors are fundamental in nature and expected to be operational in any minerals, preferentially those with dense structures, that crystallized in H2O-CO2-laden environments. This opens the possibility that common magmatic and metamorphic rocks when weathering at the surface of a tectonically active planet like Earth may be an important source of abiogenically formed complex organic compounds.

NASA Discipline Exobiology↗

Mechanical Properties and Corrosion Behavior of As-Cast Mg-Zn-Zr-(La) Magnesium Alloys

The effects of La content on the mechanical properties and corrosion behavior of as-cast Mg-Zn-Zr (ZK) magnesium alloys were investigated. The results showed that La addition to ZK60 alloy resulted in a considerable grain refinement and an increase in the volume fraction of second phases by formation of Mg-Zn-La ternary phase. The tensile tests were performed at both room and elevated temperatures. At room temperature, the yield and tensile strengths and elongation-to-fracture significantly increased with 0.2 wt.% La addition, then deteriorated slightly with increasing La additions above 0.2 wt.%. At 200 °C, the yield and tensile strengths continually improved and elongation-to-fracture decreased with increasing La content due to the presence of thermally stable Mg-Zn-La phase. Immersion and electrochemical corrosion tests revealed that the formation of Mg-Zn-La phases led to a higher amount of cathodic sites and preferential corrosion propagation, and thus a decrease in the corrosion resistance of ZK60 alloys.

36 MATERIALS SCIENCE↗

Defect and phase stability of solid solutions of Mg{sub 2}X with an antifluorite structure: An ab initio study

First principles calculations are done for Mg{sub 2}X (X=Si, Ge or Sn) antifluorite compounds and their solid solutions in order to investigate their pseudo-binary phase diagram. The formation energies of the end-member compounds agree qualitatively with the experiments. For X=Si and Ge, there is a complete solubility, but we observe a miscibility gap in the pseudo-binary phase diagram Mg{sub 2}Si-Mg{sub 2}Sn. This agrees with the most recent experiments and phase diagram assessments. Calculated electronic properties of Mg{sub 2}Si{sub 1-x}Sn{sub x} alloys qualitatively agree with experiments and in particular the energy bandgap decreases when Si is substituted by Sn. Supercell calculations are also done in order to determine the most stable defects and the doping induced by these defects in the three end-member compounds. We find that the intrinsic n-doping in pure Mg{sub 2}Si can be attributed to the presence of magnesium atoms in interstitial positions. In Mg{sub 2}Ge and Mg{sub 2}Sn, since other defects are stable, they can be also of p-type. - Graphical abstract: Evidence of a miscibility gap from the plot of the formation energy vs x{sub Si} (silicon content) for the solid solutions Mg{sub 2}Si-Mg{sub 2}Sn. Highlights: Black-Right-Pointing-Pointer First-principles study of the stability of Mg{sub 2}Si-Mg{sub 2}X alloys (X=Ge or Sn) and their defects. Black-Right-Pointing-Pointer Mg{sub 2}Si-Mg{sub 2}Ge alloys form a complete series of solid solutions. Black-Right-Pointing-Pointer Miscibility gap is found in Mg{sub 2}Si-Mg{sub 2}Sn alloys. Black-Right-Pointing-Pointer Interstitial defects are more stable in Mg{sub 2}Si and induce n-doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocatalytic property and structural stability of CuAl-based layered double hydroxides

Three types of CuMAl layered double hydroxides (LDHs, M=Mg, Zn, Ni) were successfully synthesized by coprecipitation. Powder X-ray diffraction (XRD), inductively coupled plasma atomic emission spectrometry (ICP-AES) and UV–Vis diffuse reflectance spectrum (UV–vis) were used to confirm the formation of as-synthesized solids with good crystal structure. The photocatalytic activity of those LDH materials for CO{sub 2} reduction under visible light was investigated. The experimental results show that CuNiAl-LDHs with narrowest band gap and largest surface areas behave highest efficiency for methanol generation under visible light compared with CuMgAl-LDHs and CuZnAl-LDHs. The CuNiAL-LDH showed high yield for methanol production i.e. 0.210 mmol/g h, which was high efficient. In addition, the influence of the different M{sup 2+} on the structures and stability of the CuMAl-LDHs was also investigated by analyzing the geometric parameters, electronic arrangement, charge populations, hydrogen-bonding, and binding energies by density functional theory (DFT) analysis. The theoretical calculation results show that the chemical stability of LDH materials followed the order of CuMgAl-LDHs>CuZnAl-LDHs>CuNiAl-LDHs, which is just opposite with the photocatalytic activity and band gaps of three materials. - Graphical abstract: The host–guest calculation models and XRD patterns of CuMAl-LDHs: CuMgAl-LDHs (a), CuZnAl-LDHs (b) and CuNiAl-LDHs (c). - Highlights: • Three types of CuMAl layered double hydroxides (LDHs, M=Mg, Zn, Ni) has been synthesized. • CuMgNi shows narrower band gap and more excellent textural properties than other LDHs. • The band gap: CuMgAl<CuZnAl<CuNiAl based on result from UV–vis analysis. • CuMgAl shows the highest stability and lowest photocatalytic activity, while CuNiAl just opposite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Modified Johnson-Cook Model for Sheet Metal Forming at Elevated Temperatures and Its Application for Cooled Stress-Strain Curve and Spring-Back Prediction

In this study, a modified Johnson-Cook (J-C) model and an innovated method to determine (J-C) material parameters are proposed to predict more correctly stress-strain curve for tensile tests in elevated temperatures. A MATLAB tool is used to determine material parameters by fitting a curve to follow Ludwick's hardening law at various elevated temperatures. Those hardening law parameters are then utilized to determine modified (J-C) model material parameters. The modified (J-C) model shows the better prediction compared to the conventional one. As the first verification, an FEM tensile test simulation based on the isotropic hardening model for boron sheet steel at elevated temperatures was carried out via a user-material subroutine, using an explicit finite element code, and compared with the measurements. The temperature decrease of all elements due to the air cooling process was then calculated when considering the modified (J-C) model and coded to VUMAT subroutine for tensile test simulation of cooling process. The modified (J-C) model showed the good agreement between the simulation results and the corresponding experiments. The second investigation was applied for V-bending spring-back prediction of magnesium alloy sheets at elevated temperatures. Here, the combination of proposed J-C model with modified hardening law considering the unusual plastic behaviour for magnesium alloy sheet was adopted for FEM simulation of V-bending spring-back prediction and shown the good comparability with corresponding experiments.

36 MATERIALS SCIENCE↗

Reducing spin-torque switching current by incorporating an ultra-thin Ta layer with CoFeB free layer in magnetic tunnel junctions

We studied the spin torque switching in dual MgO layer based magnetic tunnel junctions (MTJs) by incorporating an ultra-thin (0.5 nm) Ta layer at the CoFeB free layer/top MgO layer interface. The Ta incorporated MTJ showed a significant reduction (∼30%) in critical switching current density (J{sub C0} ) as compared to that of the control MTJ whilst maintaining the same tunneling magnetoresistance as well as thermal stability. The reduction of J{sub C0} can be attributed to the perpendicular magnetic anisotropy arising from the incorporation of an ultrathin Ta layer with the MgO|CoFeB structure. This scheme of reducing J{sub C0} without degrading other properties may contribute to the development of spin-transfer-torque magnetic random access memory for low power applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication and characterization of spin injector using a high-quality B2-ordered-Co{sub 2}FeSi{sub 0.5}Al{sub 0.5}/MgO/Si(100) tunnel contact

We successfully fabricate a (100)-orientated B2-type-Co{sub 2}FeSi{sub 0.5}Al{sub 0.5} (CFSA)/MgO/Si(100) tunnel contact that is promising for an efficient spin injector for Si channels. The MgO barrier is formed by radical oxidation of an Mg thin film deposited on a Si(100) surface at room temperature and successive radical oxygen annealing at 400 °C. The CFSA electrode is grown on the MgO barrier at 400 °C by ultrahigh-vacuum molecular beam deposition, and it exhibits a (100)-orientated columnar polycrystalline structure with a high degree (63%) of B2-order. The MgO barrier near the interface of the CFSA/MgO junction is crystallized with the (100) orientation, i.e., the spin filter effect due to the MgO barrier could be expected for this junction. A three-terminal Si-channel spin-accumulation device with a CFSA/MgO/Si(100) spin injector is fabricated, and the Hanle effect of accumulated spin polarized electrons injected from this contact to the Si channel is observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗