Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Milestone 49 Report: Batched Sparse LA Phase 5 Implementation

Batched sparse linear algebra operations in general, and solvers in particular, have become the major algorithmic development activity and foremost performance engineering effort in the numerical software libraries work on modern hardware with accelerators such as GPUs. Many applications, ECP and non-ECP alike, require simultaneous solutions of many small linear systems of equations that are structurally sparse in one form or another. In order to move towards high hardware utilization levels, it is important to provide these applications with appropriate interface designs to be both functionally efficient and performance portable and give full access to the appropriate batched sparse solvers running on modern hardware accelerators prevalent across DOE supercomputing sites since the inception of ECP. To this end, we present here a summary of recent advances on the interface designs in use by HPC software libraries supporting batched sparse linear algebra and the development of sparse batched kernel codes for solvers and preconditioners. We also address the potential interoperability opportunities to keep the corresponding software portable between the major hardware accelerators from AMD, Intel, and NVIDIA, while maintaining the appropriate disclosure levels conforming to the active NDA agreements. The presented interface specifications include a mix of batched band, sparse iterative, and sparse direct solvers with their accompanying functionality that is already required by the application codes or we anticipated to be needed in the near future. This report summarizes progress in Kokkos Kernels and the xSDK libraries MAGMA, Ginkgo, hypre, PETSc, and SuperLU.

97 MATHEMATICS AND COMPUTING↗

Idaho National Laboratory Integrated Multisite SSHAC Level 3: Probabilistic Volcanic Hazards Assessment

The Idaho National Laboratory (INL) resides on the eastern Snake River Plain (ESRP), part of the Snake River Plain (SRP) with a complex origin and geologic history of volcanism. Much of the Quaternary (last 2.58 million years) volcanism within 400 km of INL is genetically associated with a major thermal anomaly referred to as the Yellowstone hotspot, which is currently located more than 180 km northeast of INL. Near INL, local volcanic sources include silicic domes near its southern border, and numerous dike-fed basaltic vents of the ESRP, some of which are near or within the INL boundaries. Quantitative probabilistic assessments of screened-in volcanic hazardous phenomena for nine different facility complexes at the INL are presented for a Senior Seismic Hazard Analysis Committee (SSHAC) Level 3 (SL3) study. The comprehensive, integrated multisite SSHAC study consists of a single regional Probabilistic Volcanic Hazards Assessment (PVHA) that pertains to all nine INL facility complexes, with site-specific information developed at each respective area of interest (AOI), referred to as the "INL facility AOI" (Figure ES-1). Hazard products are generated for specified INL facility AOIs for use by multiple stakeholders from different agencies in risk-informed decision-making regarding site selection, operations, and design of nuclear facilities at INL, consistent with U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC) regulatory guidance. The study also serves as the basis for future periodic safety assessments required for existing DOE facilities, such as 10-year evaluations of natural-phenomena hazards. Elements of the INL PVHA including initial characterization, screening, quantitative assessments of eruption and hazard potential, and consideration of facility needs are conducted using the three phases of the SSHAC process: evaluation, integration, and documentation. As per regulatory guidance, the SSHAC framework provided the necessary processes and procedures for the PVHA Technical Integration (TI) team, at three workshops, five formal working meetings and many TI team remote meetings, to conduct initial characterization, screen the volcanic hazards, create PVHA model inputs, exercise those models in the PVHA, consider facility-specific volcanic hazard needs, and perform final hazard calculations. The Participatory Peer Review Panel (PPRP) provided independent oversight and performed process and technical reviews of the PVHA throughout its duration. The study included an extensive New Data Collection and Analyses (NDCA) program developed by the PVHA TI team to reduce uncertainties in hazard-significant elements in the PVHA model. NDCA activities generated 20 reports providing important contributory datasets and results to the project database for characterizing the ESRP. For example, a report compiling the dimensions of ESRP shield volcanoes and lava fields was used to construct volcanic footprints (areas of impact), was compared with data from INL subsurface cores, and was used to validate the results of lava-flow inundation modeling on the contemporary terrain. Another example is the acquisition of aeromagnetic data over INL and its surrounding area, with maps of buried magmatic features (e.g., subsurface volcanoes and swarms of feeder dikes) that informed the PVHA conceptual model of volcanism. The SSHAC evaluation process was used to conduct all elements of the PVHA including initial characterization and screening. Existing data and NDCA activities provided the foundation to develop the tectonomagmatic conceptual model of volcanism for the region of geographical interest in the SRP and Yellowstone hotspot volcanic system, and for considering volcanoes in the western US. Considering Quaternary volcanic sources active during this period, the screening approach identified and evaluated magma compositions, types of eruptive and intrusive phenomena, types of hazardous phenomena, and proximity of sources to INL. The PVHA TI team evaluated 18 types of magmatic sources in terms of 20 potentially hazardous phenomena, resulting in 360 screening decisions. The screening process resulted in 140 screened-in hazardous volcanic phenomena for Quaternary volcanic sources 1) proximal to INL facility complexes in the ESRP (64 basaltic and 54 silicic), 2) regional sources associated with the Yellowstone caldera system and Blackfoot Reservoir volcanic field (7), and 3) more distal sources from thirteen Cascade volcanoes and two volcanoes at Long Valley caldera (CA).

58 GEOSCIENCES↗

Structure and Stability of Iron Fluoride at High Pressure–Temperature and Implication for a New Reservoir of Fluorine in the Deep Earth

Fluorine (F) is the most abundant halogen in the bulk silicate Earth. F plays an important role in geochemical and biological systems, but its abundance and distribution in the terrestrial mantle are still unclear. Recent studies suggested that F reservoirs in the deep mantle are potentially hosted in terrestrial oxide minerals, especially in aluminous bridgmanite. However, the knowledge about the formation and stability field of fluoride in the Earth’s interior is rare. In this study, we combine in situ laser-heated diamond anvil cell, synchrotron X-ray diffraction, and first-principles structure search to show that a new tetragonal structure of FeF 3 is stable at pressures of 78–130 GPa and temperatures up to ~1900 K. Simulation predicted the tetragonal phase takes a much denser structure due to the rotation of FeF 6 octahedral units. The equations of states of tetragonal FeF3 are determined by experiment and verified by simulation. Our results indicate that FeF 3 can be a potential key phase for storing F in the Earth’s lower mantle and may explain some mantle-derived magma with high F concentration.

58 GEOSCIENCES↗

Composition and Pressure Effects on Partitioning of Ferrous Iron in Iron-Rich Lower Mantle Heterogeneities

Both seismic observations of dense low shear velocity regions and models of magma ocean crystallization and mantle dynamics support enrichment of iron in Earth’s lowermost mantle. Physical properties of iron-rich lower mantle heterogeneities in the modern Earth depend on distribution of iron between coexisting lower mantle phases (Mg,Fe)O magnesiowüstite, (Mg,Fe)SiO3 bridgmanite, and (Mg,Fe)SiO3 post-perovskite. The partitioning of iron between these phases was investigated in synthetic ferrous-iron-rich olivine compositions (Mg0.55Fe0.45)2SiO4 and (Mg0.28Fe0.72)2SiO4 at lower mantle conditions ranging from 33–128 GPa and 1900–3000 K in the laser-heated diamond anvil cell. The resulting phase assemblages were characterized by a combination of in situ X-ray diffraction and ex situ transmission electron microscopy. The exchange coefficient between bridgmanite and magnesiowüstite decreases with pressure and bulk Fe# and increases with temperature. Thermodynamic modeling determines that incorporation and partitioning of iron in bridgmanite are explained well by excess volume associated with Mg-Fe exchange. Partitioning results are used to model compositions and densities of mantle phase assemblages as a function of pressure, FeO-content and SiO2-content. Unlike average mantle compositions, iron-rich compositions in the mantle exhibit negative dependence of density on SiO2-content at all mantle depths, an important finding for interpretation of deep lower mantle structures.

Dorfman, Susannah M. (ORCID:0000000239689592)↗

Redox Evolution via Gravitational Differentiation on Low-mass Planets: Implications for Abiotic Oxygen, Water Loss, and Habitability

The oxidation of rocky planet surfaces and atmospheres, which arises from the twin forces of stellar nucleosynthesis and gravitational differentiation, is a universal process of key importance to habitability and exoplanet biosignature detection. Here we take a generalized approach to this phenomenon. Using a single parameter to describe the redox state, we model the evolution of terrestrial planets around nearby M stars and the Sun. Our model includes atmospheric photochemistry, diffusion and escape, line-by-line climate calculations, and interior thermodynamics and chemistry. In most cases, we find abiotic atmospheric O{sub 2} buildup around M stars during the pre-main-sequence phase to be much less than calculated previously, because the planet’s magma ocean absorbs most oxygen liberated from H{sub 2}O photolysis. However, loss of noncondensing atmospheric gases after the mantle solidifies remains a significant potential route to abiotic atmospheric O{sub 2} subsequently. In all cases, we predict that exoplanets that receive lower stellar fluxes, such as LHS1140b and TRAPPIST-1f and g, have the lowest probability of abiotic O{sub 2} buildup and hence may be the most interesting targets for future searches for biogenic O{sub 2}. Key remaining uncertainties can be minimized in future by comparing our predictions for the atmospheres of hot, sterile exoplanets such as GJ1132b and TRAPPIST-1b and c with observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Reduced Late Bombardment on Rocky Exoplanets around M Dwarfs

Ocean-vaporizing impacts of chemically reduced planetesimals onto the early Earth have been suggested to catalyze atmospheric production of reduced nitrogen compounds and trigger prebiotic synthesis despite an oxidized lithosphere. While geochemical evidence supports a dry, highly reduced late veneer on Earth, the composition of late-impacting debris around lower-mass stars is subject to variable volatile loss as a result of their hosts' extended pre-main-sequence phase. We perform simulations of late-stage planet formation across the M-dwarf mass spectrum to derive upper limits on reducing bombardment epochs in Hadean-analog environments. We contrast the solar system scenario with varying initial volatile distributions due to extended primordial runaway greenhouse phases on protoplanets and the desiccation of smaller planetesimals by internal radiogenic heating. We find a decreasing rate of late-accreting reducing impacts with decreasing stellar mass. Young planets around stars ≤0.4 M ⊙ experience no impacts of sufficient mass to generate prebiotically relevant concentrations of reduced atmospheric compounds once their stars have reached the main sequence. For M-dwarf planets to not exceed Earth-like concentrations of volatiles, both planetesimals, and larger protoplanets must undergo extensive devolatilization processes and can typically emerge from long-lived magma ocean phases with sufficient atmophile content to outgas secondary atmospheres. Our results suggest that transiently reducing surface conditions on young rocky exoplanets are favored around FGK stellar types relative to M dwarfs.

79 ASTRONOMY AND ASTROPHYSICS↗

Iodine speciation in basaltic melts at depth

The speciation of iodine in basalts has been investigated by combining in situ X-ray diffraction at high pressures and temperatures up to 4.9 GPa and 1600 °C, and Raman spectroscopy on recovered high pressure glasses at ambient conditions. Both methods point to iodine being oxidized in basalts, whether molten or quenched as glasses. Observed interatomic distances and Raman vibrational modes are consistent with iodine being dissolved as complex iodate groups alike polyiodates or periodates, not as IO$^-_3$ groups. Iodine speciation in basalts therefore seems to reflect a trend amongst halogens, with lighter chlorine bonding to network modifying cations, and bromine changing affinity from network modifying cations to oxygen anions under pressure. In the absence of a fluid aqueous phase, iodine could thus reach the Earth’s surface in basaltic magmas as an oxide, not as a reduced species.

58 GEOSCIENCES↗

Experimental investigation of elemental and isotopic evaporation processes by laser heating in an aerodynamic levitation furnace

In this report we carried out evaporation experiments on a B-type calcium–aluminium-rich inclusion (CAI) melt in a gas-mixing aerodynamic levitation laser furnace, at 1873 K and an oxygen partial pressure of 10 -9.1 atm, for durations ranging from 60 to 600 s. Evaporation of SiO 2 and MgO follow the same trend as those observed in vacuum furnace experiments at the same temperature and starting composition, showing that their evaporation relative to one another from the melt is independent of pressure, oxygen fugacity, and hydrodynamical regime specific to the furnace. Isotopic ratios of Mg and Si in evaporation residues are used to derive fractionation factors of α 26/24 Mg vap-liq = 0.9906± 0.0004 and α 30/28 Si vap-lip = 0.9943±0.0003, which are both significantly closer to unity than those found for evaporation in a vacuum, which translates to less isotope fractionation. The residues are also less isotopically fractionated than expected for cases in which transport of the gas species away from the melt is diffusion-controlled at 1-atm. By analysing the flow regimes in our furnace, we find that advection by the levitating gas is the primary mode of mass transport away from the melt surface, as opposed to diffusion-limited transport in a vacuum or 1-atm tube furnace. A modified Hertz–Knudsen–Langmuir formulation accounts for this process, and shows that isotopic fractionation of both Si and Mg reflect a saturation factor (ratio of the pressure of the evaporating species to vapour saturation pressure) equal to 0.75. This is in perfect accord with recent measurements of Cu isotopic fractionation using a similar furnace. The fact that three elements (Mg, Si, Cu) with varying equilibrium vapour pressures, activity coefficients in the liquid, and diffusion coefficients in the gas have the same scaling behaviour to saturation pressure is a strong indication that the mechanism controlling evaporation is driven by the hydrodynamical regime imposed in the furnace. Therefore, this class of experiments can be used to constrain processes in which advection dominates over diffusion, such as (but not limited to) planetary ejecta, tektites, giant impacts, nebular condensation in a turbulent flow, or nuclear fallout material. Finally, the possibility to reach high temperatures (in excess of 3500 K) in this furnace allows it to be used to evaluate the activity coefficients of melt components in extreme conditions relevant to molten planetary interiors (i.e., magma oceans), with a specific focus on refractory elements.

58 GEOSCIENCES↗

Ultrahigh pressure structural changes in a 60 mol. % Al 2 O 3 –40 mol. % SiO 2 glass

Structure of an aluminum containing glass (60 mol% Al 2 O 3 –40 mol% SiO 2 , denoted as A40S) is investigated up to 131 GPa, a pressure close to that of the Earth’s core-mantle boundary, by using our recently developed double-stage large volume cell. The first peak ( r 1) of the pair distribution function, which corresponds to T–O distance (T=Al,Si), rapidly increases below 16 GPa, implying an increase of average coordination number (CN) of T–O from ~4 to 6. The r 1 linearly decreases in the pressure range of 16–108 GPa, while it becomes constant above 108 GPa. The kink in the r 1 with mounting pressure implies a structural change in the A40S glass around 108 GPa. The behavior of the r 1 may be explained by the change of Al–O distance accompanied with the Al–O CN increase from 6 to >6 predicted by the first-principles molecular dynamics simulations (Ghosh and Karki, 2018). These observations suggest the occurrence of an ultrahigh-pressure structural change in aluminosilicate system at the deep lower mantle, which might suggest a dense aluminosilicate magma with negative buoyancy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Apollo 12 spinels as petrogenetic indicators

Lunar 12 spinel compositional variation and textures as petrogenetic indicators, showing magma differentiation by crystal settling after lunar surface extrusion

Reid, J. B., Jr.↗

Origin of quaternary basalts from the Black Rock Desert Region, Utah.

An evaluation has been made of the relative roles of fractional crystallization and crustal contamination in the genesis of basaltic magmas from the Black Rock Desert region in Utah. As a result, geochemical variations of these basalts have been defined as a function of their ages of eruption.

Condie, K. C.↗

Petrology of Apollo 11 sample 10071 - A differentiated mini-igneous complex.

Sample 10071,33 is a thin section of Apollo 11 ferrobasalt showing an unusual dual texture. The major portion of the sample is very similar to other fine grained Apollo 11 basalts, but the thin section also includes materials with a distinct variolitic texture. The two areas are separated by a sharp boundary and the mineralogy and composition of the two textural types are quite distinct. The mineralogy and chemistry of the variolitic portion show it to be the product of rapid cooling of a liquid, intermediate between the typical Apollo 11 ferrobasalt and the associated Si and K-rich mesostasis. This liquid is the result of fractional crystallization of a magma of composition closely corresponding to the major portion of the 10071 system, followed by crystal-liquid separation. The sample provides strong and direct evidence for igneous differentiation on the lunar surface.

Drake, M. J.↗