Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Low Temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

High Li + Transference Number Electrolyte Enabled by Fluoride Acceptor for Low-Temperature Li-Ion Batteries

To enable wide-temperature operation of lithium-ion batteries (LIBs), new electrolyte formulations have been developed to enhance the performance, particularly at low temperatures. A key challenge lies in achieving both high ionic conductivity and a high lithium-ion transference number due to their inherent trade-off. In this study, we designed an electrolyte system comprising tris(pentafluorophenyl)borane (TPFPB), a fluoride acceptor, and LiF salt in ethylene carbonate (EC)-free solvents. TPFPB, with its electron-deficient boron center, facilitates fluoride transfer reactions that promote the dissociation of otherwise insoluble LiF. When methyl acetate (MA) was used as the solvent, the electrolyte exhibited a high transference number (t Li + = 0.85) and ionic conductivity (σ = 5.0 × 10 –3 S cm –1 ). The optimized electrolyte demonstrated excellent performance at −20 °C, with no evidence of lithium plating. This work presents a new strategy for electrolyte design by leveraging cation desolvation to achieve high-performance LIBs for low-temperature and high-power applications.

anions↗

Low-temperature hydrothermal synthesis of the three-layered sodium cobaltite P3-Na{sub x}CoO{sub 2} (x ∼ 0.60)

Highlights: • We report direct synthesis of the high temperature stable phase, P3-Na{sub 0.6}CoO{sub 2}. • The hydrothermal synthesis of P3-Na{sub 0.6}CoO{sub 2} involves one step and low temperature. • The yield diagram for Na–Co–H{sub 2}O system has been builded up to 250 °C. • We propose a formation mechanism of P3-Na{sub 0.6}CoO{sub 2} phase using the unit cell theory. • The thermal stability of P3-Na{sub 0.6}CoO{sub 2} has been investigated by means of HT-XRD. - Abstract: In order to obtain the layered sodium cobalt oxide materials by hydrothermal synthesis, the yield diagram for Na–Co–H{sub 2}O system has been built and studied. In the same time, the well-known data of Co–H{sub 2}O system have been extended at 250 °C in basic solution. We had first synthesized directly the high temperature stable phase, P3-Na{sub 0.6}CoO{sub 2} by a one-step low-temperature hydrothermal method. The rhombohedral structure of P3-Na{sub 0.6}CoO{sub 2} has been determined by X-ray diffraction (XRD) and the purity of phases has been confirmed by XPS. The thermal stability of P3-Na{sub 0.6}CoO{sub 2} has been investigated by means of high temperature X-ray diffraction in 298–873 K range and when the temperature has reached 723 K, the completely transformation of P3-Na{sub 0.6}CoO{sub 2} in the rhombohedral stable phase α-NaCoO{sub 2} (space group R-3m) was observed. Also, a formation mechanism of P3-Na{sub 0.6}CoO{sub 2} phase using the unit cell theory in the hydrothermal process was proposed.

36 MATERIALS SCIENCE↗

Low Temperature Environment Operations of Turboengines (Design and User's Problems)

The author summarizes and links together a number of papers that were presented at the Propulsion and Energetics (PEP) symposium on low temperature environment operation of turbojet engines that was held October 8 to 12, 1990. Topics covered include operational experience of ice ingestion in the turboprop engine in the 2,000 hp class, icing on helicopter turbo engines, icing test facilities, ice relevant cloud physical parameters, and low temperature and fuel problems.

R Jacques↗

Singular Temperature Dependence of the Equation of State of Superconductors with Spin-Orbit Interaction in Low-Temperature Region – II

We extend a previous study of the space and temperature dependence of the order parameter in an ultrathin superconducting film in a longitudinal magnetic field to the vicinity of the critical transition surface. In these films, the spin-orbit interaction can be sizeable. The calculations are restricted to the low-temperature regime. Special attention is given to the zero temperature limit where the state with the maximum value of the critical field is investigated for the given strength of the spin-orbit interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancing Low-Temperature Syngas Production via Surface Tailoring of Supported Intermetallic Nanocatalysts

An active and coke-resistant silica-encapsulated intermetallic Ni 3 Zn nanoparticle catalyst was developed for low-temperature (450 °C) dry reforming of methane (DRM). The catalyst exhibited a remarkable 4-fold increase in activity (4.5 s –1 ) with over 99% CO selectivity and 3 orders of magnitude less carbonaceous species and demonstrated remarkable stability (70 h) compared to that of a monometallic Ni catalyst. Here, the key is the combined effect of surface ensemble structure and electronic interaction modulation through the surface composition tailoring achieved by off-stoichiometric Ni and Zn loading in controlling surface chemistry for achieving different activities and H 2 /CO ratios. Characterized by ion spectroscopy, X-ray photoelectron spectroscopy, and the neutron pair distribution function, it was revealed that paired Ni δ – –Zn δ+ active sites are crucial for DRM. Transient infrared spectroscopy and isotopic analysis uncovered the synergistic effect of Ni δ – –Zn δ+ sites in activating C–H bonds and dissociating CO 2 to prevent coke formation under low-temperature conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-temperature mechanical properties of superconducting radio frequency cavity materials

Low temperature mechanical behaviors have been investigated for the constituent materials of superconducting radio frequency cavities. Test materials consist of small grain Nb, single crystal Nb, large grain Nb (bicrystal), Ti45Nb-Nb weld joint (e-beam welded), and Ti-316L bimetal joint (explosion welded). The strength of all test metals displayed strong temperature dependence and the Ti-316L bimetal showed the highest strength and lowest ductility among the test materials. The fracture toughness of the small grain Nb metals decreased with decreasing test temperature and reached the lower shelf values (30 40 MPa m) at or above 173 K. The Ti45Nb base and Ti45Nb-Nb weld metals showed much higher fracture toughness than the small grain Nb. An extrapolation and comparison with existing data showed that the fracture toughness of the small grain Nb metals at 4 K was expected to be similar to those at 173 K and 77 K. The results from optical photography at a low magnification and fractography by a scanning electron microscope were consistent with corresponding mechanical properties.

36 MATERIALS SCIENCE↗

Understanding low temperature oxidation activity of nanoarray-based monolithic catalysts: from performance observation to structural and chemical insights

Monolithic catalysts have been widely used in automotive, chemical, and energy relevant industries. Nano-array based monolithic catalysts have been developed, demonstrating high catalyst utilization efficiency and good thermal/mechanical robustness. Compared with the conventional wash-coat based monolithic catalysts, they have shown advances in precise and optimum microstructure control and feasibility in correlating materials structure with properties. Recently, the nano-array based monolithic catalysts have been studied for low temperature oxidation of automotive engine exhaust and exhibited interesting and promising catalytic activities. Here, this review focuses on discussing the key catalyst structural parameters that affect the catalytic performance from the following aspects, (1) geometric shape and crystal planes, (2) guest atom doping and defects, (3) array size and size-assisted active species loading, and (4) the synergy effect of metal oxide in composite nano-arrays. Prior to the discussion, an overview of the current status of synthesis and development of the nano-array based monolithic catalysts is introduced. The performance of these materials in low temperature simulated engine exhaust oxidation is also demonstrated. Finally, we hope this review will elucidate the science and chemistry behind the good oxidation performance of the nanoarray- based monolithic catalysts, and serve as a timely and useful research guide for rational design and further improvement of the nano-array based monolithic catalysts for automobile emission control.

36 MATERIALS SCIENCE↗

Singular temperature dependence of the equation of state of superconductors with spin–orbit interaction in the low-temperature region

The equation of state is investigated for a thin superconducting film in a longitudinal magnetic field and with strong spin-orbit interaction at the critical point. As a first step, the state with the maximal value of the magnetic field for a given value of spin–orbit interaction at T = 0 is chosen. This state is investigated in the low-temperature region. The temperature contribution to the equation of state is weakly singular.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High intensity low temperature (HILT) performance of space concentrator GaInP/GaInAs/Ge MJ SCs

In the work, the results of an investigation of GaInP/GaInAs/Ge MJ SCs intended for converting concentrated solar radiation, when operating at low temperatures (down to −190 °C) are presented. A kink of the cell I-V characteristic has been observed in the region close to V{sub oc} starting from −20°C at operation under concentrated sunlight. The causes for its occurrence have been analyzed and the reasons for formation of a built-in potential barrier for majority charge carriers at the n-GaInP/n-Ge isotype hetero-interface are discussed. The effect of charge carrier transport in n-GaInP/n-pGe heterostructures on MJ SC output characteristics at low temperatures has been studied including EL technique.

14 SOLAR ENERGY↗

Development of ZnO Nanorod-Based Scintillators Grown Under a Low-Temperature Hydrothermal Method for Use in Alpha-Particle and Thermal Neutron Detectors

Due to material properties such as sub-nanosecond decay time and high light output, ZnO-based scintillators are being developed as a radiation detector material. In this study, ZnO nanorods grown via a low temperature hydrothermal method were investigated using photoluminescence (PL) and α-particle testing. Vertically aligned ZnO nanorods of varying lengths were grown and tested. The ZnO nanorod scintillators were compared to a MOCVD grown ZnO scintillator. In conclusion, the low temperature hydrothermal method shows promising performance for low-cost growth of ZnO scintillators for use as α-particle detectors and as a part of thermal neutron detection systems if doped with or in contact with a thermal neutron radiator.

36 MATERIALS SCIENCE↗

Gradients of 50 MV/m in TESLA Shaped Cavities via Modified Low Temperature Bake

This paper will discuss the 75/120 C modified low temperature bake capable of giving unprecedented accel-erating gradients of above 50 MV/m for 1.3 GHz TESLA-shaped niobium SRF cavities in CW operation. A bifurca-tion in the Q₀ vs E_{acc} curve is observed after retesting cavities without disassembly in between, yielding per-formance that ranges from exceptional to above state-of-the-art. Atomic Force Microscopy studies on cavity cut-outs gives a possible mechanism responsible for this branching in performance, namely, the dissociation and growth of room temperature niobium nano-hydrides that exist near the RF surface, which are made superconduct-ing only through the proximity effect. In-situ low temper-ature baking of cavity cutouts reveals a dissociation of these room temperature nano-hydrides, which could ex-plain the higher performance of cavities subject to similar in-situ heating in the dewar.

43 PARTICLE ACCELERATORS↗

Low-temperature crystallization of high performance Pb{sub 0.4}Sr{sub 0.6}TiO{sub 3} films compatible with the current silicon-based microelectronic technology

This investigation presents a simple approach to realize the low temperature crystallization of Pb{sub 0.4}Sr{sub 0.6}TiO{sub 3} thin films at 400 Degree-Sign C by taking advantage of well controlled lead excess and kinetic-driving-force compensated thermodynamics crystalline via sputtering deposition. The thin films prepared at low temperature show fine-grained micro-structure because of the suppressed grain growth, furthermore, the intrinsic dielectric response can be modulated by the distinct level of crystallinity. The film processed at 450 Degree-Sign C exhibited a dielectric constant of 435 and high figure merit of 130 at 400 kV/cm, superior ferroelectric property, and stable performance with temperature and frequency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ Investigation of Methane Dry Reforming on M-CeO 2 (111) {M= Co, Ni, Cu} Surfaces: Metal-Support Interactions and the activation of C-H bonds at Low Temperature

Studies with a series of M-CeO 2 (111) {M= Co, Ni, Cu} surfaces indicate that metal-oxide interactions can play a very important role for the activation of methane and its reforming with CO 2 at relatively low temperatures (600-700 K). Among the systems examined, Co-CeO 2 (111) exhibits the best performance and Cu-CeO 2 (111) has negligible activity. Experiments using ambient pressure XPS indicate that methane dissociates on Co-CeO2(111), at temperatures as low as 300 K, generating CH x and CO x species on the catalyst surface. The results of density-functional calculations show a reduction in the methane activation barrier from 1.07 eV on Co(0001) to 0.87 eV on Co 2+ /CeO 2 (111), and to only 0.05 eV on Co 0 /CeO 2-x (111). At 700 K, under methane dry reforming conditions, CO 2 dissociates on the oxide surface and a catalytic cycle is established without coke deposition. In conclusion, a significant part of the CH x formed on the Co 0 /CeO 2-x (111) catalyst recombines to yield ethane or ethylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-temperature hydrothermal synthesis of BiFeO{sub 3} microcrystals and their visible-light photocatalytic activity

Highlights: ► Urea-assisted hydrothermal synthesis of pure BiFeO{sub 3} at 120 °C was reported. ► Possible formation mechanism of pure phase BiFeO{sub 3} at low temperature was illuminated. ► BiFeO{sub 3} microcrystals exhibited efficient visible-light photocatalytic activity. -- Abstract: Pure BiFeO{sub 3} (BFO) microcrystals were synthesized at the temperature as low as 120 °C via a urea-assisted hydrothermal process. The crystal structure, morphology and photocatalytic property of BFO microcrystals were investigated. The analysis reveals that the hydrolysis of urea in the hydrothermal process plays a key role in the synthesis of pure phase BFO microcrystals. FE-SEM and TEM results show that these BFO microcrystals present a nearly spherical microstructure, and specially exhibit superstructures consisting of large amounts of small particles with the size of 100–150 nm by further observation. Moreover, these BFO microcrystals exhibit efficient photocatalytic activity under visible-light irradiation, suggesting their promising applications as photocatalysts and related fields.

36 MATERIALS SCIENCE↗

Chemical sputtering of graphite by low temperature nitrogen plasmas at various substrate temperatures and ion flux densities

We report measurements of chemical sputtering yields of graphite exposed to low temperature nitrogen plasmas. The influence of surface temperature and incoming ion energy on the sputtering yields has been investigated in two distinct ion flux density regimes. Sputtering yields grow consistently with increasing temperatures in experiments with low flux density (Γ{sub i}≈10{sup 20} m{sup −2}s{sup −1}−10{sup 21} m{sup −2}s{sup −1}) and high flux density (Γ{sub i}≈10{sup 23} m{sup −2}s{sup −1}). Moreover, empirical fitting of the data suggests that the temperature of 670 °C is optimal for chemical sputtering at high flux density. Negative biasing of the samples was used to vary the ion energy in the low flux density regime. The sputtering yield in this case increases from 0.07 atoms/ion for E{sub i} = 1.5 eV to 0.19 atoms/ion for E{sub i} = 35 eV. After taking into account the dependence of the yields on temperature and ion energy, we evidenced a flux dependence of sputtering, similar to that found for chemical sputtering of carbon by hydrogen.

36 MATERIALS SCIENCE↗

Low-Temperature Hydrothermal Resource Potential Estimate

Compilation of data (spreadsheet and shapefiles) for several low-temperature resource types, including isolated springs and wells, delineated area convection systems, sedimentary basins and coastal plains sedimentary systems. For each system, we include estimates of the accessible resource base, mean extractable resource and beneficial heat. Data compiled from USGS and other sources. The paper (submitted to GRC 2016) describing the methodology and analysis is also included.

15 GEOTHERMAL ENERGY↗