Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Longitudinal dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Dark-field x-ray microscopy for 2D and 3D imaging of microstructural dynamics at the European x-ray free-electron laser

Dark field x-ray microscopy (DXFM) can visualize microstructural distortions in bulk crystals. Using the femtosecond x-ray pulses generated by x-ray free-electron lasers (XFELs), DFXM can achieve sub-μm spatial resolution and <100 fs time resolution simultaneously. In this paper, we demonstrate ultrafast DFXM measurements at the European XFEL to visualize an optically driven longitudinal strain wave propagating through a diamond single crystal. We also present two DFXM scanning modalities that are new to the XFEL sources: spatial 3D and 2D axial-strain scans with sub-μm spatial resolution. With this progress in XFEL-based DFXM, we discuss new opportunities to study multi-timescale spatiotemporal dynamics of microstructures.

47 OTHER INSTRUMENTATION↗

Temperature structure and dynamics of the middle atmosphere of Venus

Data obtained by the Pioneer Venus Orbiter Infrared Radiometer in late 1978 and early 1979 are presented in tabular form, including, in particular, the mean temperature structure, with complete latitudinal and longitudinal coverage, and zonal-mean cloud properties. The mean thermal and cloud structures can be interpreted in terms of general circulation of the middle atmosphere. The interim results indicate that (1) the zonal winds on Venus fall to very low values above 90 km, (2) there is a strong midlatitude jet which circles the planet approximately every two days, and (3) the observed solar tides are dominated by the semidiurnal component.

Taylor, F. W.↗

Flame Edge Dynamics and Interaction in a Multi-Nozzle Can Combustor with Fuel Staging

The characterization and mitigation of thermoacoustic combustion instabilities in gas turbine engines is necessary to reduce pollutant emissions, premature wear, and component failure associated with unstable flames. Fuel staging, a technique in which the fuel flow to a multi-nozzle combustor is unevenly distributed between the nozzles, has been shown to mitigate the intensity of self-excited combustion instabilities in multiple nozzle combustors. In our previous work, we hypothesized that staging suppresses instability through a phase-cancellation effect in which the heat release rate from the staged nozzle oscillates out of phase with that of the other nozzles, leading to destructive interference that suppresses the instability. This previous theory, however, was based on chemiluminescence imaging, which is a line-of-sight integrated technique. In this work, we use high-speed laser-induced fluorescence to further investigate instability suppression in two staging configurations: center-nozzle and outer-nozzle staging. An edge-tracking algorithm is used to compute local flame edge displacement as a function of time, allowing instability-driven edge oscillation phase coherence and other instantaneous flame dynamics to be spectrally and spatially resolved. Analysis of flame edge oscillations shows the presence of convecting coherent fluctuations of the flame edge caused by periodic vortex shedding. When the system is unstable, these two flame edges oscillate together as a result of high-intensity longitudinal-mode acoustic oscillations in the combustor that drive periodic vortex shedding at each of the nozzle exits. In the stable cases, however, the phase between the oscillations of the center and outer flame edges is greater than 90 degrees (~114 degrees), suggesting that the phase-cancellation hypothesis may be valid. This analysis allows a better understanding of the instantaneous flame dynamics behind flame edge oscillation phase offset and fuel staging-based instability suppression.

Doleiden, Daniel↗

Three-dimensional ordering of cold ion beams in a storage ring: A molecular-dynamics simulation study

Three-dimensional (3D) ordering of a charged-particle beams circulating in a storage ring is systematically studied with a molecular-dynamics simulation code. An ion beam can exhibit a 3D ordered configuration at ultralow temperature as a result of powerful 3D laser cooling. Various unique characteristics of the ordered beams, different from those of crystalline beams, are revealed in detail, such as the single-particle motion in the transverse and longitudinal directions, and the dependence of the tune depression and the Coulomb coupling constant on the operating points.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Parton distribution functions of heavy mesons on the light front

The parton distribution functions (PDFs) of heavy mesons are evaluated from their light-front wave functions, which are obtained from a basis light-front quantization in the leading Fock sector representation. We consider the mass eigenstates from an effective Hamiltonian consisting of the confining potential adopted from light-front holography in the transverse direction, a longitudinal confinement, and a one-gluon exchange interaction with running coupling. In this work we present the gluon and the sea quark PDFs which we generate dynamically from the QCD evolution of the valence quark distributions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Role of the Final-State Interaction and Three-Body Force on the Longitudinal Response Function of {sup 4}He

We present an ab initio calculation of the longitudinal electron scattering response function off {sup 4}He with two- and three-nucleon forces and compare to experimental data. The full four-body continuum dynamics is considered via the Lorentz integral transform method. The importance of the final-state interaction is shown at various energies and momentum transfers q. The three-nucleon force reduces the quasielastic peak by 10% for q between 300 and 500 MeV/c. Its effect increases significantly at lower q, up to about 40% at q=100 MeV/c. At very low q, however, data are missing.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SU-C-BRB-01: Development of Dynamic Gimbaled X-Ray Head Swing Irradiation Technique

Purpose: The Vero4DRT has a unique gimbaled x-ray head with rotating around orthogonal two axes. The purpose of this study was to develop a new irradiation technique using the dynamic gimbaled x-ray head swing function. Methods: The Vero4DRT has maximum field size of 150Χ150 mm2. The expanded irradiation field (expanded-field) for the longitudinal direction which is vertical to the MLC sliding direction, was created by the MLC motion and the gimbaled x-ray head rotation. The gimbaled x-ray head was rotated ± 35 mm, and the expanded-field size was set as 150Χ220 mm2. To irradiate uniform dose distribution, the diamond-shaped radiation field was created and continuously moved for the longitudinal direction. It was achieved by combination of opening and closing of the MLC and gimbal swing rotation. To evaluate dosimetric characteristic of the expanded-field, films inserted in water-equivalent phantoms at 100 mm depth were irradiated and the field size, penumbra, flatness and symmetry were analyzed.In addition, the expanded-field irradiation technique was applied to virtual wedge irradiation. Wedged beam was acquired with the delta–shaped radiation field. 150Χ 220 mm2 fields with 15, 30, 45, and 60 degree wedge were examined. The wedge angles were measured with irradiated film and compared with assumed wedge angles. Results: The field size, penumbra, flatness and symmetry of the expanded-field were 150.0 mm, 8.1–8.4 mm, 2.8% and −0.8% for the lateral direction and 220.1 mm, 6.3–6.4 mm, 3.2% and −0.4% for the longitudinal direction at 100 mm depth. The measured wedge angles were 15.1, 30.2, 45.2 and 60.2 degrees. The differences between assumed and measured angles were within 0.2 degrees. Conclusion: A new technique of the gimbal swing irradiation was developed. To extend applied targets, especially for whole breast irradiation, the expanded-field and virtual wedge irradiations would be effective.

60 APPLIED LIFE SCIENCES↗

Optimizations of a Rectilinear Cooling Channel for a Future Muon Collider

Muon colliders require significant beam cooling to achieve the luminosity needed for high-energy physics experiments. Ionization cooling has emerged as a promising solution. This study optimizes a rectilinear muon cooling channel using a multi-objective optimization framework that integrates beam dynamics simulations. We present novel optimizations of final 6D emittance versus total system length as well as those confirming the theoretical trade-offs between transverse and longitudinal emittance. Our results optimizing all stages of the system simultaneously surpass performance benchmarks reported in the literature, demonstrating possible ways to improve the efficiency of such a cooling system.

Zhang, Aubrey [U. Chicago (main)]↗

Optimizations of a Rectilinear Cooling Channel for a Future Muon Collider

Muon colliders require significant beam cooling to achieve the luminosity needed for high-energy physics experiments. Ionization cooling has emerged as a promising solution. This study optimizes a rectilinear muon cooling channel using a multi-objective optimization framework that integrates beam dynamics simulations. We present novel optimizations of final 6D emittance versus total system length as well as those confirming the theoretical trade-offs between transverse and longitudinal emittance. Our results optimizing all stages of the system simultaneously surpass performance benchmarks reported in the literature, demonstrating possible ways to improve the efficiency of such a cooling system.

Zhang, Aubrey [U. Chicago (main)]↗

Study of the single body yawed-wing aircraft concept

Areas relating to the development and improvement of the single-fuselage, yawed-wing transonic transport concept were investigated. These included: (1) developing an alternate configuration with a simplified engine installation;(2) determining a structural design speed placard that would allow the engine-airframe match for optimum airplane performance; and (3) conducting an aeroelastic stability and control analysis of the yawed-wing configuration with a flexible wing. A two-engine, single-fuselage, yawed-wing configuration was developed that achieved the Mach 1.2 design mission at 5560 km (3000 nmi) and payload of 18,140 kg (40,000 lb) with a gross weight of 217,700 kg (480,000 lb). This airplane was slightly heavier than the aft-integrated four-engine configuration that had been developed in a previous study. A modified structural design speed placard, which was determined, resulted in a 6% to 8% reduction in the gross weight of the yawed-wing configurations. The dynamic stability characteristics of the single-fuselage yawed-wing configuration were found to be very dependent on the magnitude of the pitch/roll coupling, the static longitudinal stability, and the dihedral effect.

Kulfan, R. M.↗

Optimization of an oxide dispersion strengthened Ni-Cr-Al alloy for gas turbine engine vanes

The investigation was carried out to determine the optimum alloy within the Ni-16Cr-Al-Y2O3 system for use as a vane material in advanced aircraft gas turbine engines. Six alloys containing nominally 4%, 5% and 6% Al with Y2O3 levels of 0.8% and 1.2% were prepared by mechanical attrition. Six small-scale, rectangular extrusions were produced from each powder lot for property evaluation. The approximate temperatures for incipient melting were found to be 1658 K (2525 F), 1644 K (2500 F) and 1630 K (2475 F) for the 4%, 5% and 6% aluminum levels, respectively. With the exception of longitudinal crystallographic texture, the eight extrusions selected for extensive evaluation either exceeded or were close to mechanical property goals. Major differences between the alloys became apparent during dynamic oxidation testing, and in particular during the 1366 K (2000 F)/500 hour Mach 1 tests carried out by NASA-Lewis. An aluminum level of 4.75% was subsequently judged to be optimum based on considerations of dynamic oxidation resistance, susceptibility to thermal fatigue cracking and melting point.

Klarstrom, D. L.↗

Impact of high-alpha aerodynamics on dynamic stability parameters of aircraft and missiles

The aerodynamic phenomena associated with high angles of attack and their effects on the dynamic stability characteristics of airplane and missile configurations are examined. Information on dynamic effects is limited. Steady flow phenomena and their effects on the forces and moments are reviewed. The effects of asymmetric vortices and of vortex bursting on the dynamic response of flight vehicles are reviewed with respect to their influence on: (1) nonlinearity of aerodynamic coefficients with attitude, rates, and accelerations; (2) cross coupling between longitudinal and lateral directional models of motion; (3) time dependence and hysteresis effects; (4) configuration dependencey; and (5) mathematical modeling of the aerodynamics.

Malcolm, G. N.↗

Theoretical modeling of low-latitude Mg

The appearance of metal ions at altitudes near 100 km has long been known. The interest in metal ions arises from the contributions they can make towards understanding atmospheric dynamics. A description is presented of the results of a theoretical investigation of Mg(+) using an ionospheric model which incorporates realistic geomagnetic and electric fields. In particular, longitudinal effects can be included. The data base for comparison is the altitude profiles and latitude-local time cross sections of Mg(+) densities at fixed altitudes from the Visual Airglow Experiment on Atmospheric Explorer 'E' (AE-E), which was in equatorial orbit. Mg(+) number densities were found as functions of dip latitude, altitude, and local time in three longitudinal regions.

Fesen, C. G.↗

Vibration sensing in flexible structures using a distributed-effect modal domain optical fiber sensor

Modal domain optical fiber sensors have recently been employed in the implementation of system identification algorithms and the closed-loop control of vibrations in flexible structures. The mathematical model of the modal domain optical fiber sensor used in these applications, however, only accounted for the effects of strain in the direction of the fiber's longitudinal axis. In this paper, we extend this model to include the effects of arbitrary stress. Using this sensor model, we characterize the sensor's sensitivity and dynamic range.

Reichard, Karl M.↗

Investigation of the Hydrodynamic Characteristics of the Panto-Base Chase C-123 Airplane

An investigation of a 1/14-scale dynamically similar model of a panto-base version of the Chase C-123 airplane was conducted to evaluate the hydrodynamic characteristics of the airplane. The resistance, longitudinal stability, and spray patterns during take-off and general behavior in calm- and rough-water landings were determined. Brief calm-water tests were made to compare the initial vertical impact accelerations of the model with and without hydro-skis. Take-off stability was satisfactory for calm-water operation. A ratio of gross load to maximum resistance of 3,6 was obtained. Heavy spray reached the propellers only during ski emergence. The landing behavior in calm water and in waves 3 feet by 150 feet (full scale) was satisfactory for a normal range of trim angles. Initial impacts in calmwater landings resulted in vertical accelerations of about 2 1/2 with the hydro-skis installed and about 4g with the hydro-skis removed,

Thompson, William C.↗

Subsonic Dynamic Testing of a Subscale ADEPT Entry Vehicle

The Adaptive Deployable Entry and Placement Technology (ADEPT) is a mechanically-deployed entry system. A sounding rocket test flight of an ADEPT vehicle, known as ADEPT SR-1, was conducted in September 2018. Prior to this sounding rocket test, an investigation was performed using the NASA Langley Research Center 20-ft Vertical Spin Tunnel (VST) to assess the free-flight dynamic characteristics of ADEPT SR-1 at subsonic speeds. The model of ADEPT SR-1 for this VST test was fabricated at 50-percent geometric scale, with dynamically scaled mass properties (Froude scaled) to represent full-scale flight at an altitude of 1.2 km above sea level. The subsonic dynamic characteristics of ADEPT SR-1 were of interest prior to the sounding rocket test because of payload recovery considerations. At low roll rates the model was found to have acceptable dynamic characteristics. It was statically stable in pitch and yaw, exhibiting limit cycle pitch/yaw oscillations of no greater than 20 degrees (the angle between the model’s longitudinal axis and nadir). The model was able to recover from large upsets in pitch and yaw, although if sufficiently provoked it tumbled. Damping in roll was low. At high roll rates the pitch and yaw oscillations grew in magnitude and rate. This behavior was also observed during the sounding rocket flight test.

Cruz, Juan R.↗

Modeling of standing wave RF cavities for tracking through multi-pass energy recovery linac

Short bunches, high current and multiple linac pass are all characteristics of Energy Recovery Linacs (ERLs), which may result in collective effects. They in turn, may affect the beam, degrading its quality, or even yield to instabilities causing a beam loss. To study and mitigate these effects one needs a numerical simulation code, that can take into account both the collective effects, as well as, particular ERL features, such as a multi-turn design that does not reach a steady state or the multiple passages of the beam through Radio-Frequency (RF) cavities at different energies. CODAL [1], a code developed by SOLEIL in collaboration with IJCLab, enables such studies. It is a 6 dimensional (6D) tracking code applying 'kicks' based on the integration of the local Hamiltonian for each element of the lattice. It is also capable of simulating space charge, wakefields and coherent synchrotron radiation. However, to correctly take into account the ERL dynamics, an upgrade had to be made to include the effect of a standing wave RF cavity in 6D. In this paper, we will concentrate on the implementation and benchmarking (with DESY’s tracking code ASTRA [2]) of both the longitudinal and the transverse models (by J.B. Rosenzweig and L. Serafini [3]), which we use to carry out tracking of fully analytical 6D RF cavity.

Bogacz, A.↗

Externally driven transmission and collisions of domain walls in ferromagnetic wires

Analytical multidomain solutions to the dynamical (Landau-Lifshitz-Gilbert) equation of a one-dimensional ferromagnet including an external magnetic field and spin-polarized electric current are found using the Hirota bilinearization method. A standard approach to solve the Landau-Lifshitz equation (without the Gilbert term) is modified in order to treat the dissipative dynamics. I establish the relations between the spin interaction parameters (the constants of exchange, anisotropy, dissipation, external-field intensity, and electric-current intensity) and the domain-wall parameters (width and velocity) and compare them to the results of the Walker approximation and micromagnetic simulations. The domain-wall motion driven by a longitudinal external field is analyzed with especial relevance to the field-induced collision of two domain walls. I determine the result of such a collision (which is found to be an elastic one) on the domain-wall parameters below and above the Walker breakdown (in weak- and strong-field regimes). Single-domain-wall dynamics in the presence of an external transverse field is studied with relevance to the challenge of increasing the domain-wall velocity below the breakdown.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗