Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Isotopic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Relationship between isotope ratios in precipitation and stream water across watersheds of the National Ecological Observation Network

The timescales associated with precipitation moving through watersheds reveal processes that are critical to understanding many hydrologic systems. Measurements of environmental stable water isotope ratios (δ 2 H and δ 18 O) have been used as tracers to study hydrologic timescales by examining how long it takes for incoming precipitation tracers become stream discharge, yet limited measurements both spatially and temporally have bounded macroscale evaluations so far. Here in this observation driven study across North American biomes within the National Ecological Observation Network (NEON), we examined δ 18 O and δ 2 H stable water isotope in precipitation (δP) and stream water (δQ) at 26 co-located sites. With an average 54 precipitation samples and 139 stream water samples per site collected over 2014–2022, assessment of local meteoric water lines and local stream water lines showed geographic variation across North America. Taking the ratio of estimated seasonal amplitudes of δP and δQ to calculate young water fractions (F yw ), showed a Fyw range from 1% to 93% with most sites having F yw below 20%. Calculate d mean transit times (MTT) based on a gamma convolution model showed a MTT range from 0.10 to 13.2 years, with half of the sites having MTT estimates lower than 2 years. Significant correlations were found between the F yw and watershed area, longest flow length, and the longest flow length/slope. Significant correlations were found between MTT and site latitude, longitude, slope, clay fraction, temperature, precipitation magnitude, and precipitation frequency. The significant correlations between water timescale metrics and the environmental characteristics we report share some similarities with those reported in prior studies, demonstrating that these quantities are primarily driven by site or area specific factors. The analysis of isotope data presented here provides important constraints on isotope variation in North American biomes and the timescales of water movement through NEON study sites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

How Rains and Floods Become Groundwater: Understanding Recharge Pathways With Stable and Cosmogenic Isotopes

Anthropogenic climate change leads to increased precipitation intensity and exacerbated droughts in California, challenging the reliability and drought resiliency of water supply. Storing floodwater underground via managed aquifer recharge can mitigate these effects through direct infiltration or streambed infiltration. Seasonally dry streams (arroyos) already play an important part in managing groundwater recharge to the Livermore basin (CA). Understanding how, when and where stormwater and arroyo water infiltrate is critical to effectively utilise this strategy. To track water from recent storms (water year 2022–2023, WY23) into the Livermore Valley Groundwater Basin, we analysed stable water isotopes (δ 18 O and δ 2 H) in combination with naturally occurring radioactive isotopic tracers, sulphur-35 ( 35 S, t ½ = 87 days) and tritium ( 3 H, t ½ = 12.3 years). By comparing measurements of δ 18 O, 35 S and 3 H in arroyos to precipitation and groundwater, we classified the relative age and identified source of recharge to 16 wells near two arroyos. Two wells contained water with recent recharge (from WY23) from local precipitation. One well had recent recharge from variable (precipitation and imported water) sources. One well contained imported water recharge. Three wells contained water from mixed recent and older (pre-WY23) waters, from local precipitation sources. Two wells contained recent recharge from local mine settling ponds. Seven wells had older recharge from local precipitation sources. This combination of isotopes allows us to delineate where local and imported water recharges in this highly managed basin and identify locations where managed aquifer recharge is contributing to rapid groundwater infiltration. Our combined interpretation of isotopic water ages and sources in the context of land use shows that local infiltration of precipitation in open spaces is an important recharge mechanism, in addition to the managed arroyo recharge. Finally, a broader familiarity with 35 S will enable more extensive research on the infiltration of urban floodwaters.

58 GEOSCIENCES↗
DOE OSTI2023

Syntheses and characterization of isotopically labeled 1,3,5-triamino-2,4,6-trinitrobenzene (TATB)

Synthesis and characterization of chemical analogues of TATB, where specific atoms in the structure have been isotopically substituted, are reported. 15 N, 2 H, and 18 O have replaced the naturally occurring isotope distributions in the amino and/or the nitro attendant sites and 13 C has replaced the carbon in the ring structure. A modified wet-amination method was used to produce the analogues, and the isotopic replacements were performed by selective choice of labeled precursors. Four 15 N-labeled compounds (N replaced in the amino and nitro positions), two deuterium-labeled compounds (hydrogens replaced on the amino groups), and one 13 C-labeled compound (C in the ring substituted) were synthesized of high isotopic and chemical purity. One partially labeled 18 O-labeled compound (O in the nitro position) was a result of incomplete labeling due to exchange reactions during synthesis. The compounds were characterized by various spectroscopic methods – mass spectrometry (MS), solid-state nuclear magnetic resonance (SS-NMR), infrared (FTIR), powder x-ray diffraction (PXRD), and differential scanning calorimetry (DSC), depending upon the substitution. In conclusion, these compounds have been critical to the efforts in understanding the decomposition pathways of TATB when exposed to abnormal thermal environments.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Hydrogeological and hydrochemical investigation of groundwater using environmental isotopes ({sup 18}O, {sup 2}H, {sup 3}H, {sup 14}C) and chemical tracers: a case study of the intermediate aquifer, Sfax, southeastern Tunisia

Major element concentrations and stable (δ{sup 18}O and δ{sup 2}H) and radiogenic ({sup 3}H and {sup 14}C) isotopes in groundwater have proved useful tracers for understanding the geochemical processes that control groundwater mineralization and for identifying recharge sources in the semi-arid region of Sfax (southeastern Tunisia). Major-ion chemical data indicate that the origins of the salinity in the groundwater are the water–rock interactions, mainly the dissolution of evaporitic minerals, as well as the cation exchange with clay minerals. The δ{sup 18}O and δ{sup 2}H relationships suggest variations in groundwater recharge mechanisms. Strong evaporation during recharge with limited rapid water infiltration is evident in the groundwater of the intermediate aquifer. The mixing with old groundwater in some areas explains the low stable isotope values of some groundwater samples. Groundwaters from the intermediate aquifer are classified into two main water types: Ca-Na-SO{sub 4} and Ca-Na-Cl-SO{sub 4}. The high nitrate concentrations suggest an anthropogenic source of nitrogen contamination caused by intensive agricultural activities in the area. The stable isotopic signatures reveal three water groups: non-evaporated waters that indicate recharge by recent infiltrated water; evaporated waters that are characterized by relatively enriched δ{sup 18}O and δ{sup 2}H contents; and mixed groundwater (old/recent) or ancient groundwater, characterized by their depleted isotopic composition. Tritium data support the existence of recent limited recharge; however, other low tritium values are indicative of pre-nuclear recharge and/or mixing between pre-nuclear and contemporaneous recharge. The carbon-14 activities indicate that the groundwaters were mostly recharged under different climatic conditions during the cooler periods of the late Pleistocene and Holocene.

58 GEOSCIENCES↗
DOE OSTI2018

Application of multiple-isotope and groundwater-age data to identify factors affecting the extent of denitrification in a shallow aquifer near a river in South Korea

The extent of denitrification in a small agricultural area near a river in Yangpyeong, South Korea, was determined using multiple isotopes, groundwater age, and physicochemical data for groundwater. The shallow groundwater at one monitoring site had high concentrations of NO{sub 3}-N (74–83 mg L{sup −1}). The δ{sup 15}N-NO{sub 3} values for groundwater in the study area ranged between +9.1 and +24.6‰ in June 2014 and +12.2 to +21.6‰ in October 2014. High δ{sup 15}N-NO{sub 3} values (+10.7 to +12.5‰) in both sampling periods indicated that the high concentrations of nitrate in the groundwater originated from application of organic fertilizers and manure. In the northern part of the study area, some groundwater samples showed elevated δ{sup 15}N-NO{sub 3} and δ{sup 18}O-NO{sub 3} values, which suggest that nitrate was removed from the groundwater via denitrification, with N isotope enrichment factors ranging between −4.8 and −7.9‰ and O isotope enrichment factors varying between −3.8 and −4.9‰. Similar δD and δ{sup 18}O values of the surface water and groundwater in the south appear to indicate that groundwater in that area was affected by surface-water infiltration. The mean residence times (MRTs) of groundwater showed younger ages in the south (10–20 years) than in the north (20–30 years). Hence, it was concluded that denitrification processes under anaerobic conditions with longer groundwater MRT in the northern part of the study area removed considerable amounts of nitrate. This study demonstrates that multi-isotope data combined with physicochemical data and age-dating information can be effectively applied to characterize nitrate contaminant sources and attenuation processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Polyatomic interferences on high precision uranium isotope ratio measurements by MC-ICP-MS: Applications to environmental sampling for nuclear safeguards

Modern mass spectrometry and separation techniques have made measurement of major uranium isotope ratios a routine task; however accurate and precise measurement of the minor uranium isotopes remains a challenge as sample size decreases. One particular challenge is the presence of isobaric interferences and their impact on the accuracy of minor isotope 234 U and 236 U measurements. Furthermore, we present techniques used for routine U isotopic analysis of environmental nuclear safeguards samples and evaluate polyatomic interferences that negatively impact accuracy as well as methods to mitigate their impacts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Preliminary investigation of an uncertainty budget for uranium isotope ratio analysis using a liquid sampling—atmospheric pressure glow discharge—orbitrap mass spectrometer system

The liquid sampling-atmospheric pressure glow discharge (LS-APGD) ionization source has proven to be an effective analysis tool for making uranium isotope ratio measurements when coupled to high-resolution mass spectrometers, such as the Orbitrap. While previous studies have shown the capabilities of the LS-APGD for isotope ratio determination, a systematic evaluation of the measurement uncertainty of the technique has not been conducted. To this end, the International Standards Organizations (ISO) guidelines to the expression of uncertainty in measurement (GUM analysis) have been applied to generate an uncertainty budget. For this work, a preliminary assessment derived from the GUM analysis was performed. The uncertainty in the instrument blank determination has been identified as a primary factor contributing to measurement uncertainty for the LS-APGD-Orbitrap method. These findings for the specific test case of uranium isotopic analysis will be invaluable in applications across the breadth of isotope ratio mass spectrometry performed on this unique instrumental platform.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Neutron capture signatures determined from gadolinium isotope compositions of uranium ore concentrates using MC-ICPMS

We present Gd isotope compositions on 25 well-characterized uranium ore concentrates (UOCs). About half the UOCs have isotope depletions in 157 Gd coupled with anticorrelated excesses in 158 Gd due to neutron capture effects. UOCs from older ore bodies and with higher U contents show larger neutron capture effects than UOCs from younger ore bodies with lower U contents. These Gd data are correlated with their previously measured Sm isotope compositions, and we use the Sm data to estimate the neutron fluence of these samples. In conclusion, this work demonstrates how Gd isotope signatures can be employed as a new tool for nuclear forensics.

Earth Sciences↗
DOE OSTI2016

Static, mixed-array total evaporation for improved quantitation of plutonium minor isotopes in small samples

Actinide isotope measurements are a critical signature capability in the modern nuclear forensics “toolbox”, especially when interrogating anthropogenic constituents in real-world scenarios. Unfortunately, established methodologies, such as traditional total evaporation via thermal ionization mass spectrometry, struggle to confidently measure low abundance isotope ratios (<10 -6 ) within already limited quantities of sample. Herein, we investigate the application of static, mixed array total evaporation techniques as a straightforward means of improving plutonium minor isotope measurements, which have been resistant to enhancement in recent years because of elevated radiologic concerns. Furthermore, results are presented for small sample (~20 ng) applications involving a well-known plutonium isotope reference material, CRM-126a, and compared with traditional total evaporation methods.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2017

Oxygen–Isotope Exchange and Metastable Dissociation in Oxides

To understand the corrosion of bulk oxide materials at the molecular scale, oxygen-isotope exchanges were examined in two classes of nanometer-sized ions, one cation and one anion, and subsets that differ by targeted single-atom substitutions. In niobate anions, the different oxygen sites within each molecule differ by ~10 3 -10 4 in overall rates of isotopic exchange, yet all structural oxygens exhibit similar pH dependencies that relate to the dissociation pathways. In aluminate cations of the ε-Keggin structure, single-atom substitutions cause a 10 7 -10 10 variation of rates of oxygen-isotopic exchange into two sets of μ 2 -OH. Molecular-dynamic simulations indicate that metastable forms of these structures exist as loose, long-lived intermediates. A series of common steps is observed to access the intermediate structures, and these are best resolved in the symmetric ε-Keggin aluminate ions. In the first step, solvation forces, or a nucleophile, causes a near-surface metal to partly detach from a deeper overbonded oxygen via concerted motions of many atoms. Isotopically distinct oxygens then add to the newly undercoordinated metal in the partly detached metastable state. Protons transfer to more basic oxygens and oxygens shuffle. Finally, the metastable structure collapses and dehydrates. The number of such metastable states depends on the symmetry and composition of the starting structure and access to the metastable state controls the overall rates. Surprisingly, polyoxometalate ions with only 40-100 atoms already seem to capture much of the macroscopic chemistry observed for dissolving minerals and glasses.

17O-NMR↗
DOE OSTI2020

Equilibrium carbon isotope fractionation factors of hydrocarbons: Semi-empirical force-field method

Here, we have calculated the reduced partition function ratios for carbon isotopes (β-factor) of 67 hydrocarbons (alkanes, alkenes, alkynes, cycloalkanes, and aromatics), including their 267 single-substituted isotopomers. The calculations were performed using the harmonic oscillator – rigid rotator model and the Urey / Bigeleisen-Mayer approach. Normal frequencies of molecular vibrations of the isotopologues were calculated from the molecular structures data and valence field force constants stored in the Light-handled Elucidation of Vibrations (LEV) database elaborated by Dr. Gribov and his colleagues in Russia. The LEV database is constructed from experimental spectroscopic and structural data by solving inverse problems of molecular vibrations. The LEV is internally consistent and the most comprehensive database available to date. The β-factor were calculated in the temperature range of 200–800 K with a 10 K step. Our calculations predict that the β-factors increase with an increasing number of C atoms within the same groups of hydrocarbons (e.g., alkanes). Our calculations also show a general descending order of 13 C enrichments among the different groups of hydrocarbons: cycloalkanes, aromatics, alkenes (double bonds) and isoalkanes, alkanes, alkynes (triple bonds). Position-specific, intramolecular isotope effects within hydrocarbons are determined by the β-factors of C in the different functional groups in the order: quaternary (C), tertiary (methine, CH), secondary (methylene, CH 2 ), primary (methyl, CH 3 ) and double bond (C=C), saturated bond (C - C), triple bond (HC≡). Our calculations on bulk and position-specific carbon isotope β-factors of the hydrocarbons, which are generally consistent with very limited ab initio calculations in the literature, are internally consistent and the most comprehensive to date for future applications to position-specific isotope geochemistry of hydrocarbons.

58 GEOSCIENCES↗
DOE OSTI2022

Chemical and isotopic evolution of flowback fluids from the Utica Gas Shale Play, Eastern Ohio USA

For this work, hydraulic fracturing flowback fluids were collected from two Utica/Point Pleasant well pads in eastern Ohio. One site was in the wet gas zone (UPPW), while the site ~50 km south consisted of four wells on the same pad in the dry gas zone (UPPS). Samples of input fluids also were collected before and during hydraulic fracturing. Flowback fluids are Na-Ca-Cl brines with total dissolved salt (TDS) concentrations that increase over several months from ~100 to 200 g/L. The slightly higher TDS of the dry gas fluids are in part due to recycled flowback used as input fluids, and in part due to lower volume of water used in hydraulic fracturing. Concentrations of most major ions (Ca 2+ , Mg 2+ , Na + , Sr2 + , Fe, Mn, Cl – , Br – ) are similar for the five wells sampled, although small but systematic changes occur in the major element ratios over time. Most notably, an increase in the Sr/Cl ratio corresponds to an increase in the 87 Sr/ 86 Sr ratio in the fluids, suggesting interactions with a more radiogenic Sr source in the subsurface. Dissolved Ba concentrations and Ra activities were different between the two sites, reflecting a high SO 4 2– fluid used at the UPPW site, and water-rock reactions occurring during hydraulic fracturing at the UPPS site. Water oxygen (δ 18 O) and hydrogen (δD) isotopes for input fluids used in the UPPW4 well and fresh water used for the UPPS wells fall on the Global Meteoric waterline (GMWL). Flowback fluids from both sites are relatively enriched in δ 18 O and δD compared to the input, but do not appear to follow a simple mixing trend, suggesting reaction and isotopic exchange with carbonates and fractionation due to imbibition in the rock. Cl isotopes, δ 37 Cl in the FP fluids varied from ~ –0.43 to +0.13‰, the largest variation was observed in the earlier stages of flowback, while in the later stages δ 37 Cl exhibited a small but systematic increase over time, suggesting diffusion control of isotopic composition. Some of the trace species measured (dissolved Fe, Mn, thiosulfate and organic acids) do not follow the same trends as the major ions, suggesting contributions from input fluids, or microbially mediated reactions are exerting control on their concentrations. Input water chemistry exerts an important control on the Sr and Ba concentrations in flowback water. High SO 4 2– in the input fluids used for hydraulically fracturing the wet gas well leads to precipitation of barite-celestite in flowback fluids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

A test of the significance of intermolecular vibrational coupling in isotopic fractionation

Intermolecular coupling of dipole moments is studied for a model system consisting of two diatomic molecules (AB monomers) arranged co-linearly and which can form non-covalently bound dimers. The dipolar coupling is a function of the bond length in each molecule as well as of the distance between the centers-of-mass of the two molecules. The calculations show that intermolecular coupling of the vibrations results in an isotope-dependent modification of the AB-AB intermolecular potential. This in turn alters the energies of the low-lying bound states of the dimers, producing isotope-dependent changes in the AB-AB dimer partition function. Explicit inclusion of intermolecular vibrational coupling then changes the predicted gas-dimer isotopic fractionation. In addition, a mass dependence in the intermolecular potential can also result in changes in the number of bound dimer states in an equilibrium mixture. This in turn leads to a significant dimer population shift in the model monomer-dimer equilibrium system considered here. Finally, the results suggest that intermolecular coupling terms should be considered when probing the origins of isotopic fractionation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Development of a fast and efficient analytical technique for the isotopic analysis of fission and actinide elements in environmental matrices

An automated separation–direct analysis scheme has been developed to determine both the concentration and isotopic composition of a suite of elements down to the low picogram level in a complex silicon-based matrix. With the ultimate goal of performing rapid analysis of materials with non-natural isotopic compositions, RAPID (Rapid Analysis of Post-Irradiation Debris) consists of a high-pressure ion chromatography system directly coupled to an inductively coupled plasma mass spectrometer. The RAPID method achieves matrix exclusion and direct online analysis of the elementally separated components, yielding precise isotopic compositions for up to 40 elements in less than one hour per sample. When combined with isotope dilution, this approach shows the potential to yield elemental concentrations with low uncertainties, providing a rapid analytical method that encompasses group I and II metals, transition metals, refractory metals, platinum group metals, lanthanides, and actinides. Furthermore, the method development, robustness, sensitivity, uncertainties, and potential applications in nuclear and environmental measurements will be discussed in this paper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Large isotopic variability at the micron-scale in ‘Shuram’ excursion carbonates from South Australia

Ediacaran-aged (635–541 million years ago) marine sediments contain a large negative carbon isotope (δ 13 C) excursion, in which carbonate δ 13 C values reach -12‰ (VPDB). Known as the ‘Shuram’ excursion, many workers have interpreted this δ 13 C record as an unprecedented perturbation to the global carbon cycle, leading to speculation about a causal connection to the broadly contemporaneous rise of animal life. Others have interpreted the δ 13 C signal as a product of diagenesis, thereby minimizing its relevance for understanding the evolution of metazoans. In this work, we present SEM imaging and in-situ δ 13 C and δ 18 C values measured by secondary ion mass spectrometry (SIMS) to assess these competing hypotheses in the Wonoka Formation of South Australia. Our results from the minimum of the excursion show that rounded sedimentary grains of calcite have δ 13 C values between -12.8 to -10.6‰ and δ 18 C values between 17.8 to 15.5‰ (VPDB). Euhedral dolomite that appears to have grown unimpeded in open sedimentary pore spaces also is present. These early-stage dolomites are interpreted as early authigenic in origin and have δ 13 C values that reach +5‰, requiring a formation fluid with a substantially different δ 13 C composition from basin waters or bulk sediment. Together, these results provide little evidence for the hypothesis that a late diagenetic overprint has generated the ‘Shuram’ excursion in the Wonoka. Instead, they suggest the presence of a large carbon isotopic gradient in the surface environment, with shallow waters capable of precipitating carbonates with very low δ 13 C (down to 12‰) and deeper shelf and/or marine pore waters generating carbonates with positive carbon isotope values (up to +5‰). Because negative isotope excursions of similar magnitude are found in widely dispersed Ediacaran basins, it is likely that this gradient was characteristic of shelf environments of this period and that a still-unknown global process led to the ‘Shuram’ excursion in shallow water carbonates.

58 GEOSCIENCES↗
DOE OSTI2016

Mass independent sulfur isotope signatures in CMs: Implications for sulfur chemistry in the early solar system

In this study, we have investigated the quadruple sulfur isotopic composition of inorganic sulfur-bearing phases from 13 carbonaceous chondrites of CM type. Our samples include 4 falls and 9 Antarctic finds. We extracted sulfur from sulfides, sulfates, and elemental sulfur (S 0 ) from all samples. On average, we recover a bulk sulfur (S) content of 2.11 ± 0.39 wt.% S (1σ). The recovered sulfate, S 0 and sulfide contents represent 25 ± 12%, 10 ± 7% and 65 ± 15% of the bulk S, respectively (all 1σ). There is no evidence for differences in the bulk S content between falls and finds, and there is no correlation between the S speciation and the extent of aqueous alteration. We report ranges of Δ 33 S and Δ 36 S values in CMs that are significantly larger than previously observed. The largest variations are exhibited by S 0 , with Δ 33 S values ranging between-0.104 ± 0.012‰ and +0.256 ± 0.018‰ (2σ). The Δ 36 S/ 33 S ratios of S 0 are on average -3.1 ± 1.0 (2σ). Two CMs show distinct Δ 36 S/ 33 S ratios, of +1.3 ± 0.1 and +0.9 ± 0.1. We suggest that these mass independent S isotopic compositions record H 2 S photodissociation in the nebula. The varying Δ 36 S/Δ 33 S ratios are interpreted to reflect photodissociation that occurred at different UV wavelengths. The preservation of these isotopic features requires that the S-bearing phases were heterogeneously accreted to the CM parent body. Non-zero Δ 33 S values are also preserved in sulfide and sulfate, and are positively correlated with S 0 values. This indicates a genetic relationship between the S-bearing phases: We argue that sulfates were produced by the direct oxidation of S 0 (not sulfide) in the parent body. We describe two types of models that, although imperfect, can explain the major features of the CM S isotope compositions, and can be tested in future studies. Sulfide and S 0 could both be condensates from the nebula, as the residue and product, respectively, of incomplete H 2 S photodissociation by UV light (wavelength <150 nm). This idea requires that FeS formation and the S 0 condensation co-occur. As an alternative, ice accretion to the CM parent body could allow the delivery of S-MIF in CMs. In that case, sulfides would have been the only S-bearing condensate in CM precursors, and S 0 would have been derived from the oxidation of H 2 S trapped in ices, after its photodissociation at low temperature (<500 K) in the nebula. In our models, the observations of H 2 S UV photodissociation is required to occur at the disk surface, and allowed in nebular environments with canonical C/O ratios. Lastly, vertical motions in the disk would redistribute phases that condensed at high altitude to the midplane, where they accreted in the phases that make up the chondritic matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Experimental estimation of the bisulfite isomer quotient as a function of temperature: Implications for sulfur isotope fractionations in aqueous sulfite solutions

Bisulfite (HSO 3 - ) and sulfite (SO 3 2- ) compounds play key roles in numerous geochemical and biochemical processes extending from the atmosphere to the subseafloor biosphere. Despite decades of spectroscopic investigations, the molecular composition of HSO 3 - in solution remains uncertain and, thus, the role of bisulfite in (bio)chemical and isotope fractionation processes is unclear. We report new experimental estimates for the bisulfite isomer quotient (Qi= [(HO)SO 2 - ]/[(HS)O3-]; [] = concentration) as a function of temperature from the interpretation of Raman spectra collected from aqueous NaHSO 3 solutions contained in fused silica capsules. In pure NaHSO 3 solutions (1Na + :1HSO 3 - , stoichiometric) over [NaHSO 3 ] = 0.2–0.4 m (moles/kg H 2 O), the following relationship is obtained: ln(Q i )=[formula omitted]-1.9642(±0.1081),where T = 278–358 K (5–85 °C) (based on 50 determinations; additional significant figures are provided to avoid rounding errors). This relationship suggests that the minor isomer, (HS)O 3 - , may comprise 23–38% (±3%) of the mole fraction of HSO 3 - over 5–85 °C, respectively, which is higher in relative abundance than has generally been understood previously. We additionally provide estimates for Q i in NaHSO 3 solutions containing a total ionic strength of µ = 1.0 m (0.2 m NaHSO 3 + 0.8 m NaCl) and different pH (3.3–4.5), but do not appear to resolve any significant differences in Q i as a function of these additional variables. These new values of Q i are employed to re-assess the bulk sulfur isotope fractionations among bisulfite and other S(IV) compounds as a function of temperature, which appear to be highly dependent on the amount of (HS)O 3 - present. Our new constraints on the bisulfite isomer quotient may allow for a detailed assessment of the molecular composition and isotope mass balance of S(IV) solutions containing HSO 3 - , and may be useful in the further investigation of the mechanisms and isotope fractionations associated with a number of processes that involve bisulfite compounds. Furthermore, these may include the intracellular enzymatic transformations of sulfite and bisulfite compounds that occur as part of dissimilatory sulfate reduction, which is a major and geologically important form of anaerobic respiration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

The formation mechanisms of sedimentary pyrite nodules determined by trace element and sulfur isotope microanalysis

Redox sensitive trace elements in pyrite, including nodules, are increasingly used to infer the chemical conditions of ancient oceans—but considerable uncertainty remains regarding the mechanism and timing of nodule formation. Resolving these uncertainties is important because pyrite nodules must form in connection with the overlying water column, rather than during late diagenesis, to reflect the composition of the global ocean. Existing models for pyrite nodule formation have been specific to pyrite textures from individual sites, and we lack a unified model that can explain the compositional and textural diversity observed in nodules from different localities. In this study we examine ten pyrite nodules from several geological periods (Neoarchean to Carboniferous) using in situ LA-ICP-MS and SHRIMP-SI analyses. We present transects of spot analyses of trace elements (As, Ag, Cu, Co, Ni, Sb and Se) and S isotope ratios for each nodule. The pyrite nodules can be classified according to three main categories: those with (1) little to no trace element or isotopic zonation of the nodule from core to margin, (2) strong zonation from core to margin, and (3) minor zonation near the core but more significant zonation near the margin of the nodule. We further illustrate this zonation with a NanoSIMS element map from an additional pyrite nodule. These results are interpreted to indicate nodule formation along a spectrum between two end-member mechanisms. We suggest that the absence of trace element or isotopic zonation reflects nodule growth by a pathway that is analogous to the pervasive growth mechanism for carbonate nodules. This model involves the production of many nucleation sites that are evenly distributed within the volume that the nodule eventually occupies. Consequently, this mechanism results in a chemically homogenous nodule. Pyrites formed this way are suitable for paleoceanographic reconstruction. The other end-member mechanism is analogous to the concentric growth model for carbonate concretions. In this scenario, the core of the nodule forms first and is followed by the addition of concentric layers—each with a progressively different trace element content and δ 34 S signature as diagenesis progresses. Despite having limited utility for econstructing ancient seawater, these late forming nodules may track the evolving availability of bioessential trace elements for the subsurface biosphere with important implications for global biogeochemical cycles. Finally, spatial trends in trace elements and S isotopes thus speak to the mechanisms of pyrite nodule formation and provide a framework for evaluating nodule suitability for a range of paleoenvironmental studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗