Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Image Classification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Delineation of soil temperature regimes from HCMM data

Evaluation of LANDSAT and Heat Capacity Mapping Mission (HCMM) data as input into National Cooperative Soil Survey is discussed. Signature classification techniques were applied to 13 May 76 LANDSAT data. LANDSAT data was overlaid with HCMM data, revealing registration problems caused by a shortage of control points in LANDSAT data, and the WARP program developed to improve registration accuracy. Initial images for control point selection were produced using digital terrain elevation data. Statistical procedures for evaluating data classification and to describe spatial distribution of surface temperature and its correlation with soil surface conditions were investigated.

Day, R. L.↗

Toward Complete Merger Identification at Cosmic Noon with Deep Learning

As we enter the era of large imaging surveys such as Roman, Rubin, and Euclid, a deeper understanding of potential biases and selection effects in optical astronomical catalogs created with the use of ML-based methods is paramount. This work focuses on a deeper understanding of the performance and limitations of deep learning-based classifiers as tools for galaxy merger identification. We train a ConvNeXT-Pico model on mock HST CANDELS images from the IllustrisTNG50 simulation. Our focus is on a more challenging classification of galaxy mergers and non-mergers at higher redshifts 1 < z < 1.5, including minor mergers and lower mass galaxies down to the stellar mass of 108M⊙. We demonstrate, for the first time, that a deep learning model, such as the one developed in this work, can successfully identify even minor and low mass mergers even at these redshifts. Our model achieves overall accuracy, purity, and completeness of over 73%. We show that some galaxy mergers can only be identified from certain observation angles, leading to a potential upper limit in overall accuracy. Using Grad-CAMs and UMAPs, we more deeply examine the performance and observe a visible gradient in the latent space with stellar mass and specific star formation rate, but no visible gradient with merger mass ratio or merger stage.

Schechter, Aimee L. [U. Colorado, Boulder]↗

Land use maps of the Tanana and Purcell Mountain areas, Alaska, based on Earth Resources Technology Satellite imagery

The author has identified the following significant results. ERTS imagery in photographic format was used to make land use maps of two areas of special interest to native corporations under terms of the Alaska Native Claims Settlement Act. Land selections are to be made in these areas, and the maps should facilitate decisions because of their comprehensive presentation of resource distribution information. The ERTS images enabled mapping broadly-defined land use classes in large areas in a comparatively short time. Some aerial photography was used to identify colors and shades of gray on the various images. The 14 mapped land use categories are identified according to the classification system under development by the U.S. Geological Survey. These maps exemplify a series of about a dozen diverse Alaskan areas. The principal resource depicted is vegetation, and clearly shown are vegetation units of special importance, including stands possibly containing trees of commercial grade and stands constituting wildlife habitat.

Anderson, J. H.↗

Proceedings of the Eleventh International Symposium on Remote Sensing of Environment, volume 2

Application and processing of remotely sensed data are discussed. Areas of application include: pollution monitoring, water quality, land use, marine resources, ocean surface properties, and agriculture. Image processing and scene analysis are described along with automated photointerpretation and classification techniques. Data from infrared and multispectral band scanners onboard LANDSAT satellites are emphasized.

Source record↗

Adaptive coding of MSS imagery

A number of adaptive data compression techniques are considered for reducing the bandwidth of multispectral data. They include adaptive transform coding, adaptive DPCM, adaptive cluster coding, and a hybrid method. The techniques are simulated and their performance in compressing the bandwidth of Landsat multispectral images is evaluated and compared using signal-to-noise ratio and classification consistency as fidelity criteria.

Habibi, A.↗

Spatial information technologies for remote sensing today and tomorrow; Proceedings of the Ninth Pecora Symposium, Sioux Falls, SD, October 2-4, 1984

Topics discussed at the symposium include hardware, geographic information system (GIS) implementation, processing remotely sensed data, spatial data structures, and NASA programs in remote sensing information systems. Attention is also given GIS applications, advanced techniques, artificial intelligence, graphics, spatial navigation, and classification. Papers are included on the design of computer software for geographic image processing, concepts for a global resource information system, algorithm development for spatial operators, and an application of expert systems technology to remotely sensed image analysis.

Source record↗

Black Holes and Neutron Stars in Nearby Galaxies: Insights from NuSTAR

Nearby galaxy surveys have long classified X-ray binaries (XRBs) by the mass category of their donor stars (high-mass and low-mass). The NuSTAR (Nuclear Spectroscopic Telescope Array) observatory, which provides imaging data at E greater than 10 keV (kiloelectronvolts), has enabled the classification of extragalactic XRBs by their compact object type: neutron star (NS) or black hole (BH). We analyzed NuSTAR/Chandra/XMM-Newton observations from a NuSTAR-selected sample of 12 galaxies within 5 Mpc (megaparsecs) having stellar masses (M (sub asterisk)) 10 (sup 7-11) solar masses and star formation rates (SFRs) approximately 0.01-15 solar masses per year. We detected 128 NuSTAR sources to a sensitivity of 10 (sup 38) ergs per second. Using NuSTAR color-intensity and color-color diagrams we classified 43 of these sources as candidate NSs and 47 as candidate BHs. We further subdivide BHs by accretion states (soft, intermediate, and hard) and NSs by weak (Z/Atoll) and strong (accreting pulsar) magnetic field. Using eight normal (Milky Way-type) galaxies in the sample, we confirm the relation between the SFR and galaxy X-ray point source luminosity in the 4-25 and 12-25 keV energy bands. We also constrained galaxy X-ray point source luminosity using the relation L (sub X) equals M (sub asterisk) plus Beta SFR, finding agreement with previous work. The X-ray luminosity function (XLF) of all sources in the 4-25 and 12-25 keV energy bands matches the alpha = 1.6 slope for high-mass XRBs. We find that NS XLFs suggest a decline beginning at the Eddington limit for a 1.4 solar mass NS, whereas the BH fraction shows an approximate monotonic increase in the 4-25 and 12-25 keV energy bands. We calculate the overall ratio of BH to NS to be approximately 1 for 4-25 keV and approximately 2 for 12-25 keV.

Vulic, N.↗

Improving the CERES SYN Cloud and Flux Products by Identifying GOES-17 Scan Anomalies Using a Convolutional Neural Network

The NASA Clouds and the Earth’s Radiant Energy System (CERES) project relies on top-of-atmosphere (TOA) broadband fluxes derived from geostationary (GEO) satellite imagery to account for the diurnal flux variations between the CERES observation intervals, and thereby produce a synoptic gridded (SYN1deg) product based on continuous temporal observations. Consistent broadband flux derivation depends on accurate radiative property measurements and cloud retrievals, which largely determine the radiance-to-flux conversion process. Therefore, it is important to ensure a high quality of cloud property input in order to maintain a reliable broadband flux record. In Edition 4 of the CERES SYN1deg product, a robust automated image anomaly detection algorithm based on inter-line and inter-pixel differences, spatial variance, and 2-D Fourier analysis has been successful in identifying imagery with linear artifacts, but the line-by-line inspection and cleaning process must still be performed by a human. Therefore, further automation of this quality assurance process is warranted, especially considering the excessive amount of additional cleaning necessitated by the GOES-17 Advance Baseline Imager (ABI) cooling system anomaly. As such, this article highlights advancement of the CERES GEO image artifact cleaning approach based on a convolutional neural network (CNN) for classification of bad scanlines. Once trained, the CNN approach is a computationally inexpensive means to ensure greater consistency in cloud retrievals, and therefore broadband flux derivation, based on GOES-17 measurements.

Benjamin Scarino↗

Synergy of Urban Heat, Pollution, and Social 1 Vulnerability in One of America’s Most Rapidly 2 Growing Cities: Houston, We Have a Problem

During the first two decades of the twenty-first century, we analyze the expansion of 23urban land cover, urban heat island (UHI), and urban pollution island (UPI) in the Houston 24Metropolitan Area (HMA) using land cover classifications derived from Landsat and land/aerosol 25products from NASA's Moderate Resolution Imaging Spectroradiometer. Our approach involves 26both direct utilization and fusion with in situobservations for a comprehensive characterization.27We also examined how social vulnerability within the HMA changed during the study period and 28whether the synergy of UHI, UPI,and social vulnerability enhances environmental inequalities.

Andrew Blackford↗

Toward Complete Merger Identification at Cosmic Noon with Deep Learning

As we enter the era of large imaging surveys such as $\textit{Roman}$, Rubin, and $\textit{Euclid}$, a deeper understanding of potential biases and selection effects in optical astronomical catalogs created with the use of ML-based methods is paramount. This work focuses on a deeper understanding of the performance and limitations of deep learning-based classifiers as tools for galaxy merger identification. We train a ResNet18 model on mock Hubble Space Telescope CANDELS images from the IllustrisTNG50 simulation. Our focus is on a more challenging classification of galaxy mergers and nonmergers at higher redshifts $1

Schechter, Aimee [Colorado U.] (ORCID:000000017120↗

The spatial resolving power of earth resources satellites: A review

The significance of spatial resolving power on the utility of current and future Earth resources satellites is critically discussed and the relative merits of different approaches in defining and estimating spatial resolution are outlined. It is shown that choice of a particular measure of spatial resolution depends strongly on the particular needs of the user. Several experiments have simulated the capabilities of future satellite systems by degradation of aircraft images. Surprisingly, many of these indicated that improvements in resolution may lead to a reduction in the classification accuracy of land cover types using computer assisted methods. However, where the frequency of boundary pixels is high, the converse relationship is found. Use of imagery dependent upon visual interpretation is likely to benefit more consistently from higher resolutions. Extraction of information from images will depend upon several other factors apart from spatial resolving power: these include characteristics of the terrain being sensed, the image processing methods that are applied as well as certain sensor characteristics.

Townshend, J. R. G.↗

Uranium Oxide Synthetic Pathway Discernment through Unsupervised Morphological Analysis

We present a novel unsupervised machine learning method for quantitative representation of scanning electron micrographs and its applications and performance for nuclear forensic analysis of uranium ore concentrates. The method uses a vector quantizing variational autoencoder followed by a histogram operation to encode a micrograph into a single dimensional representation, called the latent vector. The method requires no extant labeling of the data and can be applied over large datasets of micrographs with minimal human interaction. The representations generated are broadly descriptive of each micrograph and the microstructure of the material imaged. In the case of uranium ore concentrate analysis, the representations were amenable to processing reagent and ore concentrate species classification with accuracy of 81:8%, which is competitive with state-of-the-art supervised networks. The representations were also used to classify previously unseen processing routes, were able to classify imaging parameters such as magnification (to 76:0% accuracy), were able to classify fine grained process parameters such as calcining temperature (to 74:4% accuracy), and their informatic properties indicate that they are generally descriptive of the image represented. This method can be applied across microstructure analysis fields to perform quantitative analysis without the need for labor intensive and possibly biased human analysis.

Scanning Electron Microscopy, Vector Quantizing Va↗

The Image Display and Manipulation System /IDAMS/

The Image Display and Manipulation System (IDAMS) is an interactive image analysis system consisting of a general purpose computer, a TV display and control console, and software. This paper describes the system features and capabilities. A scenario approach which simplifies the user interface is defined and is applied to multispectral classification. Included is a brief description of the Atmospheric and Oceanographic Information Processing System (AOIPS), a new interactive image analysis system currently being implemented at the Goddard Space Flight Center (GSFC).

Alford, W. L.↗

Landsat classification of coastal wetlands in Texas

Through a multiagency study of Landsat imagery applications, an analysis of Texas coastal wetlands shows that five Level III categories of wetlands can be delineated using image interpretation: topographically low marshes, topographically high marshes, tidal flats, sea grass and algal flats, and vegetated dredged material. Image interpretation involves optical enlargement of 1:1,000,000 scale, Landsat transparencies to a scale of 1:125,000 and mapping on a stable film base. Digital classification procedures, resulting in 1:24,000 scale line printer maps as output, require several iterations to display welands effectively. Accuracies of 65% were achieved for all wetland categories combined.

Finley, R. J.↗

A scene-analysis approach to remote sensing

The author has identified the following significant results. Geometric correspondance between a sensed image and a symbolic map is established in an initial stage of processing by adjusting parameters of a sensed model so that the image features predicted from the map optimally match corresponding features extracted from the sensed image. Information in the map is then used to constrain where to look in an image, what to look for, and how to interpret what is seen. For simple monitoring tasks involving multispectral classification, these constraints significantly reduce computation, simplify interpretation, and improve the utility of the resulting information. Previously intractable tasks requiring spatial and textural analysis may become straightforward in the context established by the map knowledge. The use of map-guided image analysis in monitoring the volume of water in a reservoir, the number of boxcars in a railyard, and the number of ships in a harbor is demonstrated.

Tenenbaum, J. M.↗

Vegetation species composition and canopy architecture information expressed in leaf water absorption measured in the 1000 nm and 2200 spectral region by an imaging spectrometer

Plant species composition and plant architectural attributes are critical parameters required for the measuring, monitoring, and modeling of terrestrial ecosystems. Remote sensing is commonly cited as an important tool for deriving vegetation properties at an appropriate scale for ecosystem studies, ranging from local to regional and even synoptic scales. Classical approaches rely on vegetation indices such as the normalized difference vegetation index (NDVI) to estimate biophysical parameters such as leaf area index or intercepted photosynthetically active radiation (IPAR). Another approach is to apply a variety of classification schemes to map vegetation and thus extrapolate fine-scale information about specific sites to larger areas of similar composition. Imaging spectrometry provides additional information that is not obtainable through broad-band sensors and that may provide improved inputs both to direct biophysical estimates as well as classification schemes. Some of this capability has been demonstrated through improved discrimination of vegetation, estimates of canopy biochemistry, and liquid water estimates from vegetation. We investigate further the potential of leaf water absorption estimated from Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data as a means for discriminating vegetation types and deriving canopy architectural information. We expand our analysis to incorporate liquid water estimates from two spectral regions, the 1000-nm region and the 2200-nm region. The study was conducted in the vicinity of Jasper Ridge, California, which is located on the San Francisco peninsula to the west of the Stanford University campus. AVIRIS data were acquired over Jasper Ridge, CA, on June 2, 1992, at 19:31 UTC. Spectra from three sites in this image were analyzed. These data are from an area of healthy grass, oak woodland, and redwood forest, respectively. For these analyses, the AVIRIS-measured upwelling radiance spectra for the entire Jasper Ridge scene were transformed to apparent surface reflectance using a radiative transfer code-based inversion algorithm.

Green, Robert O.↗

Pre-training Vision Models for the Classification of Alerts from Wide-field Time-domain Surveys

Modern wide-field time-domain surveys facilitate the study of transient, variable and moving phenomena by conducting image differencing and relaying alerts to their communities. Machine learning tools have been used on data from these surveys and their precursors for more than a decade, and convolutional neural networks (CNNs), which make predictions directly from input images, saw particularly broad adoption through the 2010s. Since then, continually rapid advances in computer vision have transformed the standard practices around using such models. It is now commonplace to use standardized architectures pre-trained on large corpora of everyday images (e.g., ImageNet). In contrast, time-domain astronomy studies still typically design custom CNN architectures and train them from scratch. Here, we explore the effects of adopting various pre-training regimens and standardized model architectures on the performance of alert classification. We find that the resulting models match or outperform a custom, specialized CNN like what is typically used for filtering alerts. Moreover, our results show that pre-training on galaxy images from Galaxy Zoo tends to yield better performance than pre-training on ImageNet or training from scratch. We observe that the design of standardized architectures are much better optimized than the custom CNN baseline, requiring significantly less time and memory for inference despite having more trainable parameters. On the eve of the Legacy Survey of Space and Time and other image-differencing surveys, these findings advocate for a paradigm shift in the creation of vision models for alerts, demonstrating that greater performance and efficiency, in time and in data, can be achieved by adopting the latest practices from the computer vision field.

79 ASTRONOMY AND ASTROPHYSICS↗

Using dark current data to estimate AVIRIS noise covariance and improve spectral analyses

Starting in 1994, all AVIRIS data distributions include a new product useful for quantification and modeling of the noise in the reported radiance data. The 'postcal' file contains approximately 100 lines of dark current data collected at the end of each data acquisition run. In essence this is a regular spectral-image cube, with 614 samples, 100 lines and 224 channels, collected with a closed shutter. Since there is no incident radiance signal, the recorded DN measure only the DC signal level and the noise in the system. Similar dark current measurements, made at the end of each line are used, with a 100 line moving average, to remove the DC signal offset. Therefore, the pixel-by-pixel fluctuations about the mean of this dark current image provide an excellent model for the additive noise that is present in AVIRIS reported radiance data. The 61,400 dark current spectra can be used to calculate the noise levels in each channel and the noise covariance matrix. Both of these noise parameters should be used to improve spectral processing techniques. Some processing techniques, such as spectral curve fitting, will benefit from a robust estimate of the channel-dependent noise levels. Other techniques, such as automated unmixing and classification, will be improved by the stable and scene-independence noise covariance estimate. Future imaging spectrometry systems should have a similar ability to record dark current data, permitting this noise characterization and modeling.

Boardman, Joseph W.↗