Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Arsenic Sequestration By Sorption Processes in High-Iron Sediments

High-iron sediments in North Haiwee Reservoir (Olancha, CA), resulting from water treatment for removal of elevated dissolved arsenic in the Los Angeles Aqueduct system, were studied to examine arsenic partitioning between solid phases and porewaters undergoing shallow burial. To reduce arsenic in drinking water supplies, ferric chloride and a cationic polymer coagulant are added to the aqueduct upstream of Haiwee Reservoir, forming an iron-rich floc that scavenges arsenic from the water. Analysis by synchrotron X-ray absorption spectroscopy (XAS) showed that the aqueduct precipitate is an amorphous hydrous ferric oxide (HFO) similar to ferrihydrite, and that arsenic is associated with the floc as adsorbed and/or coprecipitated As(V). Arsenic-rich floc and sediments are deposited along the inlet channel as aqueduct waters enter the reservoir. Sediment core samples were collected in two consecutive years from the edge of the reservoir along the inlet channel using 30- or 90-cm push cores. Cores were analyzed for total and extractable arsenic and iron concentrations. Arsenic and iron speciation and mineralogy in sediments were examined at selected depths by synchrotron XAS and X-ray diffraction (XRD). Sediment-porewater measurements were made adjacent to the core sample sites using polyacrylamide gel probe samplers. Results showed that sediment As(V) is reduced to As(III) in all cores at or near the sediment-water interface (0--4 cm), and only As(III) was observed in deeper sediments. Analyses of EXAFS spectra indicated that arsenic is present in the sediments mostly as a bidentate-binuclear, inner-sphere sorption complex with local atomic geometries similar to those found in laboratory studies. Below about 10 cm depth, XAS indicated that the HFO floc had been reduced to a mixed Fe(II, III) solid with a local structure similar to that of synthetic green rust (GR) but with a slightly contracted average interatomic Fe-Fe distance in the hydroxide layer. There was no evidence from XRD for the formation of a crystalline GR phase. The release of dissolved iron (presumably Fe{sup 2+}) and arsenic to solution, as monitored by in situ gel probes, was variable but, in general, occurred at greater depths than arsenic reduction in the sediments by spectroscopic observations and appears to be near or below the depth at which sediment GR was identified. These data point to reductive dissolution of the sorbent iron phase as the primary mechanism of release of sorbed arsenic to solution.

43 PARTICLE ACCELERATORS↗

Reduction Enhancement Mechanisms of a Low-Grade Iron Ore–Coal Composite by NaCl

The reduction behavior of a low iron grade with high SiO{sub 2} content ore–coal composite was investigated in the temperature range of 1143 K to 1263 K (870 °C to 990 °C). Sodium chloride was chosen as an additive to promote this reduction process. The effect of the sodium chloride addition and its mechanism was also investigated. Results showed that the added sodium chloride could enhance the reduction of wustite to iron due to the decrease of fayalite, and a higher metallization ratio of reduced sample was obtained. Thermogravimetric–differential scanning calorimeter analysis showed that sodium chloride could greatly facilitate the gasification process of coal and, thus, provide sufficient carbon monoxide to the reduction process of iron oxides. Meanwhile, sodium chloride promoted the reduction process of iron ore pellets directly as the coal gasification effect was excluded. Microstructures of reduced sample revealed that sodium chloride broke the structure of ore and enhanced the growth of newly formed iron particles. As the ore–coal composite with mol (C/Fe = 1.4) and 3 mass pct sodium chloride addition was roasted at 1233 K (960 °C) for 55 minutes, a reduced sample with metallization ration of 74.45 pct could be obtained.

36 MATERIALS SCIENCE↗

Interactions of Alumina-Based and Magnesia-Based Refractories with Iron Melts and Slags: A Review

A novel flash ironmaking technology (FIT) based on the direct reduction of iron ore concentrate with a reductant gas (such as hydrogen, natural gas, coal gas, or a combination thereof) in a flash furnace is being developed at the University of Utah. This technology which is undergoing large-scale laboratory testing aims at overcoming the limitations of blast furnace ironmaking by bypassing the problematic pelletization/sintering and cokemaking steps.[1–5] Refractory selection is expected to play an important step in the development of FIT and its proposed scale-up. For nominating an appropriate refractory for the FIT, understanding the interactions of candidate refractories with iron/iron oxide and slags under H{sub 2}/CO/CO{sub 2}/H{sub 2}O environments is necessary. This work is undertaken to review the existing literature on the interactions of important refractories with iron melts and relevant slags with an emphasis on two of the most commonly used refractories in ironmaking and steelmaking applications: the alumina-based refractories (used widely in blast furnace operations) and the magnesia-based refractories (used extensively in primary as well as secondary steelmaking). First, a comprehensive review on the interactions of alumina-based refractories with iron melts and slags has been done. Next the existing literature on the interactions of magnesia-based refractories with iron melts and relevant slags has been reviewed. Summaries have been included after each section and sub-section along with comments and critical insights from the authors. Finally, in the concluding remarks the differences in operating conditions between existing iron and steelmaking practices and the novel FIT have been highlighted. On the basis of these differences, it has been argued that the results and conclusions available from previous studies on refractory–metal–slag interactions are of little significance to flash ironmaking. Thus, there exists a need to carry out laboratory experiments for evaluating refractory performance in flash ironmaking under conditions relevant to the current process (FIT).

36 MATERIALS SCIENCE↗

Gallionellaceae in rice root plaque: metabolic roles in iron oxidation, nutrient cycling, and plant interactions

On the roots of wetland plants such as rice, Fe(II) oxidation forms Fe(III) oxyhydroxide-rich plaques that modulate plant nutrient and metal uptake. The microbial roles in catalyzing this oxidation have been debated and it is unclear if these iron-oxidizers mediate other important biogeochemical and plant interactions. To investigate this, we studied the microbial communities, metagenomes, and geochemistry of iron plaque on field-grown rice, plus the surrounding rhizosphere and bulk soil. Plaque iron content (per mass root) increased over the growing season, showing continuous deposition. Analysis of 16S rRNA genes showed abundant Fe(II)-oxidizing and Fe(III)-reducing bacteria (FeOB and FeRB) in plaque, rhizosphere, and bulk soil. FeOB were enriched in relative abundance in plaque, suggesting FeOB affinity for the root surface. Gallionellaceae FeOB Sideroxydans were enriched during vegetative and early reproductive rice growth stages, while a Gallionella was enriched during reproduction through grain maturity, suggesting distinct FeOB niches over the rice life cycle. FeRB Anaeromyxobacter and Geobacter increased in plaque later, during reproduction and grain ripening, corresponding to increased plaque iron. Metagenome-assembled genomes revealed that Gallionellaceae may grow mixotrophically using both Fe(II) and organics. The Sideroxydans are facultative, able to use non-Fe substrates, which may allow colonization of rice roots early in the season. FeOB genomes suggest adaptations for interacting with plants, including colonization, plant immunity defense, utilization of plant organics, and nitrogen fixation. Taken together, our results strongly suggest that rhizoplane and rhizosphere FeOB can specifically associate with rice roots, catalyzing iron plaque formation, with the potential to contribute to plant growth.

59 BASIC BIOLOGICAL SCIENCES↗

Interfacial and Activation Energies of Environmentally Abundant Heterogeneously Nucleated Iron(III) (Hydr)oxide on Quartz

Poorly crystalline iron(III) (hydr)oxide nanoparticles are ubiquitous in environmental systems and play a crucial role in controlling the fate and transport of contaminants. Yet, the thermodynamic and kinetic parameters, e.g., the effective interfacial (α^') and apparent activation (E a ) energies, of iron(III) (hydr)oxide nucleation on earth-abundant mineral surfaces have not been determined, which hinders an accurate prediction of iron(III) (hydr)oxide formation and its interactions with other toxic or reactive ions. Here, for the first time, we report experimentally obtained α^' and E a for iron(III) (hydr)oxide nucleation on quartz mineral surfaces, by employing a flow-through, time-resolved grazing incidence small angle X-ray scattering (GISAXS). GISAXS enabled the in situ detection of iron(III) (hydr)oxide nucleation rates under different supersaturations (σ, achieved by varying pH 3.3-3.6) and temperatures (12-35ºC). By quantitative analyses based on classical nucleation theory, α^' was obtained to be 34.6 mJ/m 2 and E a was quantified as 32.8 kJ/mol. The fundamental thermodynamic and kinetic parameters obtained here will advance our fundamental understanding of the surface chemistry and nucleation behavior of iron(III) (hydr)oxides in subsurface and water treatment systems, as well as their effects on the fate and transport of pollutants in natural and engineered water systems. The in situ flow-through GISAXS method can also be adapted to quantify thermodynamic and kinetic parameters at interfaces for many important solid–liquid environmental systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Iron-Mediated Oxidation of Methoxyhydroquinone under Dark Conditions: Kinetic and Mechanistic Insights

Despite the biogeochemical significance of the interactions between natural organic matter (NOM) and iron species, considerable uncertainty still remains as to the exact processes contributing to the rates and extents of complexation and redox reactions between these important and complex environmental components. Investigations on the reactivity of low-molecular-weight quinones, which are believed to be key redox active compounds within NOM, toward iron species, could provide considerable insight into the kinetics and mechanisms of reactions involving NOM and iron. Here in this study, the oxidation of 2-methoxyhydroquinone (MH 2 Q) by ferric iron (Fe(III)) under dark conditions in the absence and presence of oxygen was investigated within a pH range of 4-6. Although Fe(III) was capable of stoichiometrically oxidizing MH 2 Q under anaerobic conditions, catalytic oxidation of MH 2 Q was observed in the presence of O 2 due to further cycling between oxygen, semiquinone radicals, and iron species. A detailed kinetic model was developed to describe the predominant mechanisms, which indicated that both the undissociated and monodissociated anions of MH 2 Q were kinetically active species toward Fe(III) reduction, with the monodissociated anion being the key species accounting for the pH dependence of the oxidation. The generated radical intermediates, namely semiquinone and superoxide, are of great importance in reaction-chain propagation. In conclusion, the kinetic model may provide critical insight into the underlying mechanisms of the thermodynamic and kinetic characteristics of metal-organic interactions and assist in understanding and predicting the factors controlling iron and organic matter transformation and bioavailability in aquatic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Superparamagnetic Iron Nanoparticles on Electrocatalysts for the Reduction of Oxygen

It is of great research interest to understand the nanostructures contributing to the activity observed in the reduction of oxygen by non-platinum group metal (PGM) electrocatalysts in acidic media. Iron- and nitrogen-containing carbon networks are often the most studied structures, among which single-atom iron-coordinated nitrogen (FeNx) moieties have often been proposed to be the structures leading to the high activity in these non-PGM electrocatalysts. Iron nanoparticles embedded within a carbon support are also formed under certain conditions as a result of the synthetic processes in making non-PGM electrocatalysts. In this study, we present a study to understand the oxygen reduction reaction (ORR) activity of prepared iron- and nitrogen-containing non-PGM electrocatalysts obtained through the pyrolysis of metal–organic framework (MOF) precursors. We studied the structure–property relationship among nanostructures made from the MOF precursor ZIF-8 under different pyrolysis conditions. Density functional theory calculations were used to explain the effect of structural moieties on the ORR activity. Our results suggest that iron-coordinated C–N structures and iron nanoparticles act synergistically to catalyze the ORR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Different Arsenate and Phosphate Incorporation Effects on the Nucleation and Growth of Iron(III) (Hydr)oxides on Quartz

Iron(III) (hydr)oxides play an important role in the geochemical cycling of contaminants in natural and engineered aquatic systems. The ability of iron(III) (hydr)oxides to immobilize contaminants can be related to whether the precipitates form heterogeneously (e.g., at mineral surfaces) or homogeneously in solution. Utilizing grazing incidence small-angle X-ray scattering (GISAXS), we studied heterogeneous iron(III) (hydr)oxide nucleation and growth on quartz substrates for systems containing arsenate and phosphate anions. For the iron(III) only system, the radius of gyration ( R g ) of heterogeneously formed precipitates grew from 1.5 to 2.5 ( ± 1.0) nm within 1 h. For the system containing 10 -5 M arsenate, R g grew from 3.6 to 6.1 ( ± 0.5) nm, and for the system containing 10 -5 M phosphate, R g grew from 2.0 to 4.0 ( ± 0.2) nm. While the systems containing these oxyanions had more growth, the system containing only iron(III) had the most nucleation events on substrates. Ex situ analyses of homogeneously and heterogeneously formed precipitates indicated that precipitates in the arsenate system had the highest water content and that oxyanions may bridge iron(III) hydroxide polymeric embryos to form a structure similar to ferric arsenate or ferric phosphate. These new fi ndings are important because di ff erences in nucleation and growth rates and particle sizes will impact the number of available reactive sites and the reactivity of newly formed particles toward aqueous contaminants.

Neil, Chelsea W.↗

Strength of iron at core pressures and evidence for a weak Earth’s inner core

The strength of iron at extreme conditions is crucial information for interpreting geophysical observations of the Earth’s core and understanding how the solid inner core deforms. However, the strength of iron, on which deformation depends, is challenging to measure and accurately predict at high pressure. Here we present shear strength measurements of iron up to pressures experienced in the Earth’s core. Hydrostatic X-ray spectroscopy and non-hydrostatic radial X-ray diffraction measurements of the deviatoric strain in hexagonally close-packed iron uniquely determine its shear strength to pressures above 200 GPa at room temperature. Applying numerical modelling of the rheologic behaviour of iron under pressure, we extrapolate our experimental results to inner-core pressures and temperatures, and find that the bulk shear strength of hexagonally close-packed iron is only ~ 1 GPa at the conditions of the Earth’s centre, 364 GPa and 5,500 K. This suggests that the inner core is rheologically weak, which supports dislocation creep as the dominant creep mechanism influencing deformation.

Gleason, A. E.↗

Altered chemistry of oxygen and iron under deep Earth conditions

A drastically altered chemistry was recently discovered in the Fe-O-H system under deep Earth conditions, involving the formation of iron superoxide (FeO 2 Hx with x =0 to 1), but the puzzling crystal chemistry of this system at high pressures is largely unknown. Here we present evidence that despite the high O/Fe ratio in FeO 2 Hx, iron remains in the ferrous, spin-paired and non-magnetic state at 60–133 GPa, while the presence of hydrogen has minimal effects on the valence of iron. The reduced iron is accompanied by oxidized oxygen due to oxygen-oxygen interactions. The valence of oxygen is not –2 as in all other major mantle minerals, instead it varies around –1. This result indicates that like iron, oxygen may have multiple valence states in our planet’s interior. Laslty, our study suggests a possible change in the chemical paradigm of how oxygen, iron, and hydrogen behave under deep Earth conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low quantum efficiency of μ-oxo iron bisporphyrin photocatalysts explained with femtosecond M-edge XANES

Bridged μ-oxo iron porphyrins serve as photocatalysts for oxidative organic transformations, but suffer from low photon-to-product efficiency. This low photochemical quantum yield is most commonly attributed to the short lifetime of a disproportionated TPPFe(II)/TPPFe(IV)=O state, but an alternate hypothesis suggests that the majority photoproduct is a catalytically inactive ligand-centered TPPFe(III)+/TPPFe(III)–O – ion pair. We use femtosecond optical and extreme ultraviolet (XUV) spectroscopy to investigate the early photodynamics of the μ-oxo iron bisporphyrin (TPPFe) 2 O and identify the primary loss mechanism. XUV spectroscopy probes 3p → 3d transitions, corresponding to M 2,3 -edge XANES spectra, and is a distinctive probe of the metal oxidation state. Excitation of the mixed π–π*/ligand-to-metal charge transfer (LMCT) band results in the formation of an iron(II)/iron(III) LMCT state in tens of femtoseconds. This state decays on a subpicosecond timescale to the ligand-centred iron(III) ion pair state, and no TPPFe(IV)=O species is observed within the sensitivity of the measurement. Finally, the lack of an iron(II)/iron(IV) XANES spectrum suggests that preferential formation of the inactive iron(III) ion pair state is a main cause of the low quantum yield of this and similar bisporphyrins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid Iron Compressed Up to 560 GPa [Fe at Earth core conditions probed by EXAFS]

Dynamic compression by multiple shocks is used to compress iron up to 560 GPa (5.6 Mbar), the highest solid-state pressure yet attained for iron in the laboratory. Extended x-ray absorption fine structure (EXAFS) spectroscopy offers simultaneous density, temperature, and local-structure measurements for the compressed iron. The data show that the close-packed structure of iron is stable up to 560 GPa, the temperature at peak compression is significantly higher than expected from pure compressive work, and the dynamic strength of iron is many times greater than the static strength based on lower pressure data. The results provide the first constraint on the melting line of iron above 400 GPa.

36 MATERIALS SCIENCE↗

Unlocking iron metal as a cathode for sustainable Li-ion batteries by an anion solid solution

Traditional cathode chemistry of Li-ion batteries relies on the transport of Li-ions within the solid structures, with the transition metal ions and anions acting as the static components. Here, we demonstrate that a solid solution of F – and PO 4 3– facilitates the reversible conversion of a fine mixture of iron powder, LiF, and Li 3 PO 4 into iron salts. Notably, in its fully lithiated state, we use commercial iron metal powder in this cathode, departing from electrodes that begin with iron salts, such as FeF 3 . Our results show that Fe-cations and anions of F – and PO 4 3– act as charge carriers in addition to Li-ions during the conversion from iron metal to a solid solution of iron salts. This composite electrode delivers a reversible capacity of up to 368 mAh/g and a specific energy of 940 Wh/kg. Our study underscores the potential of amorphous composites comprising lithium salts as high-energy battery electrodes.

25 ENERGY STORAGE↗

A Low-Cost Iron-Based Current Collector for Alkaline Battery Electrodes

The use of three-dimensional porous nickel foam as the current collector of the nickel hydroxide electrode adds significantly to the cost of the nickel-based alkaline rechargeable batteries. Although iron is considerably less expensive than nickel, iron corrodes at the operating potential of the nickel hydroxide electrode. We have found that a 70–100 nm thick thermal coating of cobalt ferrite spinel protects the iron from corrosion. Such a coated iron substrate was found to be stable against corrosion even when polarized anodically at 10 mA cm -2 in 30% potassium hydroxide electrolyte for 1000 h. While the thermal coating of cobalt ferrite protected iron against corrosion, incorporation of lithium ions into the coating was found to enhance the electrical conductivity of the coating. XPS and EXAFS studies confirmed that the enhanced conductivity resulted from an increase in the population of Co 3+ in the ferrite spinel lattice. An inexpensive iron (steel) substrate protected by such a coating when used as a nickel hydroxide battery electrode exhibited a specific capacity of 0.25 Ah g -1 at C/5 discharge rate, comparable to a nickel hydroxide electrode based on a relatively expensive nickel foam substrate. The steel-based electrode also exhibited no noticeable degradation over 150 cycles at C/2 rate. This demonstration of a robust and economical steel substrate presents a unique opportunity for reducing the cost of the nickel hydroxide battery electrode in alkaline batteries

25 ENERGY STORAGE↗

Oxygen Evolution on Iron Oxide Nanoparticles: The Impact of Crystallinity and Size on the Overpotential

The oxygen evolution reaction (OER) is a critical reaction in electrolysis and photoelectrolysis of water to generate and store clean energy. Therefore, the development of low-cost and efficient electrocatalysts for the OER is of great scientific and technological importance. Although promising iron oxide-based electrocatalysts have been recently developed for the OER, an in-depth experimental and theoretical analysis of the OER mechanism on iron oxide-based electrocatalysts is still needed to provide guidelines to optimize the performance of iron oxide-based electrocatalysts further. To address this need, we synthesized a series of monodisperse iron oxide nanoparticles to analyze their intrinsic OER activities. Using nanoparticles of the same size but different crystallinity, we show that amorphous iron oxide nanoparticles have better OER activity than crystalline ones. The size effect studies further revealed that the edge/defect sites are the active sites for the OER. Density functional theory calculations demonstrated that the edge/defect sites provide bridge sites to adsorb OER intermediates, resulting in low OER overpotential. These calculations confirm that the high OER activity of amorphous nanoparticles results from a high concentration of defect sites on their surface. These results provide novel strategies to increase the performance of iron oxide-based and likely other oxide-based OER electrocatalysts.

Electrochemistry↗

An Efficient and Robust Surface-Modified Iron Electrode for Oxygen Evolution in Alkaline Water Electrolysis

Iron is unstable as an oxygen evolution electrode in alkaline media. Thus, relatively expensive nickel-based electrodes are used in industrial alkaline water electrolysis. We show that an iron substrate can be rendered stable and electrocatalytically active for the oxygen evolution reaction by nano-scale surface modification with nickel. The electrocatalytic activity of such a surface-modified iron electrode is comparable to the recently-reported nickel-based catalysts. The electrocatalytic activity is due to a 50-nanometer layer of a high-surface area a-nickel hydroxide on the iron electrode. The nickel modification renders the iron electrode electrically-conductive, prevents dielectric breakdown, and thus endows anodic stability. The electrocatalytic activity is unchanged even after 1000 hours of continuous operation. The temperature of preparation is critical, as excessive dehydration of the hydroxide layer results in nickel ferrite formation and a drastic reduction in electrocatalytic activity. We report significant insight into the surface chemical composition and structure of the catalyst layer by X-ray Absorption Spectroscopy, Photoelectron Spectroscopy, and Transmission Electron Microscopy. Electrochemical kinetics analysis suggests that surface hydroxo-intermediates react with the hydroxide ions from the solution to evolve oxygen. Furthermore, the surface-modified iron substrates present an opportunity for improving the performance and reducing the cost of alkaline water electrolysis systems. (C) The Author(s) 2018. Published by ECS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental Benchmarking for High-Reproducibility, Cross-Institutional Evaluation of Iron Redox Electrochemistry

We present a practical case study standardizing experimental protocols between collaborators with the goal of understanding ferrous iron (Fe 2+ ) chemistry and improving the iron deposition reaction for energy-efficient, electrochemical iron production. The study of iron reactions can be difficult, as aqueous iron electrolytes exhibit complex behaviors that can lead to differing interpretation of ostensibly similar experiments. The question we want to answer: are we studying the same chemistry? Our protocols address inherent challenges such as the tendency for Fe 2+ to spontaneously oxidize to ferric iron (Fe 3+ ) and the production of hydrogen at the potentials of interest. Our standardized protocol, executed by four collaborators in different labs and institutions, yields high-reproducibility results, and identified glassy carbon electrode surface quality and Fe 3+ impurities in the salt as key factors with outsized effects on cyclic voltammetry measurements. The process of developing the protocols helped to troubleshoot underlying issues that created poorer reversibility and reproducibility. This study highlights the fact that even nominally straightforward electrochemical systems can yield vastly different outcomes due to small differences in experimental preparation and serves as a useful example for creating transparent and achievable standards for the generation of reliable datasets that can be widely used and shared.

Ketter, Benjamin [Argonne National Laboratory (ANL↗

A Bottom-up Energy Efficiency Improvement Roadmap for China’s Iron and Steel Industry up to 2050

Iron and steel manufacturing is energy intensive in China and in the world. China is the world largest steel producer accounting for around half of the world steel production. In this study, we use a bottom-up energy consumption model to analyze four steel-production and energy-efficiency scenarios and evaluate the potential for energy savings from energy-efficient technologies in China’s iron and steel industry between 2010 and 2050. The results show that China’s steel production will rise and peak in the year 2020 at 860 million tons (Mt) per year for the base-case scenario and 680 Mt for the advanced energy-efficiency scenario. From 2020 on, production will gradually decrease to about 510 Mt and 400 Mt in 2050, for the base-case and advanced scenarios, respectively. Energy intensity will decrease from 21.2 gigajoules per ton (G/t) in 2010 to 12.2 GJ/t and 9.9 GJ/t in 2050 for the base-case and advanced scenarios, respectively. In the near term, decreases in iron and steel industry energy intensity will come from adoption of energy-efficient technologies. In the long term, a shift in the production structure of China’s iron and steel industry, reducing the share of blast furnace/basic oxygen furnace production and increasing the share of electric-arc furnace production while reducing the use of pig iron as a feedstock to electric-arc furnaces will continue to reduce the sector’s energy consumption. We discuss barriers to achieving these energy-efficiency gains and make policy recommendations to support improved energy efficiency and a shift in the nature of iron and steel production in China.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗