Brushless direct current tachometer Patent
Brushless dc tachometer design with Hall effect crystals and output voltage magnitude proportional to rotor speed
Nola, F. J.↗
SEARCH · Engineering Papers
Results for “Hall effect”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A brushless dc spin motor for momentum exchange altitude control
Brushless dc spin motor is designed to use Hall effect probes as means of revolving rotor position and controlling motor winding currents. This results in 3 to 1 reduction in watt-hours required for wheel acceleration, a 2 to 1 reduction in power to run wheel, and a 10 to 1 reduction in the electronics size and weight.
Stern, D.↗
A magnetic mouse activity meter
Activity meter has been developed using Hall effect devices that record passage of selected groups of magnetically tagged mice. Two small permanent magnets are implanted in belly and back of selected mice and electronic circuits are activated as mice move between cages. System has advantage over tagging, detecting, and identification methods currently used.
Henry, J.↗
Minority carriers in graphite.
Quantum oscillations as a function of magnetic field in the Hall effect and thermoelectric power are studied in two samples of pressure-annealed pyrolytic graphite. Only the oscillations originating from minority-Fermi-surface carriers are discussed. Frequencies of the de Haas-van Alphen type are measured over a wide range of angles between the magnetic field and the c axis of the Brillouin zone. Results are given graphically and analyzed.
Woollam, J. A.↗
Dispersive waves in a seeded MHD generator.
The equations giving the response of a slightly ionized plasma with monatomic components to sinusoidal perturbations have been formulated. Included in the model equations were the electron Hall effect, electron thermal diffusion, radiation, and electron-atom rate processes. Plasma conditions were limited to those where viscous effects, the induced magnetic field, ion slip, and atom-atom inelastic processes can be neglected. Presented are results of numerical calculations for MHD generators with a working fluid of potassium seeded argon.
Harstad, K. G.↗
Solid state switch panel
An intensive study of various forms of transducers was conducted with application towards hermetically sealing the transducer and all electronics. The results of the study indicated that the Hall effect devices and a LED/phototransistor combination were the most practical for this type of application. Therefore, hardware was developed utilizing a magnet/Hall effect transducer for single action switches and LED/phototransistor transducers for rotary multiposition or potentiometer applications. All electronics could be housed in a hermetically sealed compartment. A number of switches were built and models were hermetically sealed to prove the feasibility of this type of fabrication. One of each type of switch was subjected to temperature cycling, vibration, and EMI tests. The results of these tests are presented.
Beenfeldt, E.↗
Study of materials for space processing
A handbook is presented of materials feasible for growth in space in future NASA Missions. Major emphasis was placed on a literature survey concerned with promising materials. Equipment for resistivity and hall effect set-up was procured.
Lal, R. B.↗
Solid state switch panel
An intensive study of various forms of transducers was conducted with application towards hermetically sealing the transducer pick off and all electronics. The results indicated that the Hall effect devices and a LED/phototransistor combination were the most practical for this type of application. Therefore, hardware was developed utilizing a magnet/Hall effect transducer for single action switches and LED/phototransistor transducers for rotary multiposition or potentiometer applications. A number of switches were built and models were hermetically sealed to prove the feasibility of this type of fabrication. One of each type of switch was subjected to temperature cycling, vibration, and EMI tests.
Beenfeldt, E.↗
Study of materials for space processing
Materials were selected for device applications and their commercial use. Experimental arrangements were also made for electrical characterization of single crystals using electrical resistivity and Hall effect measurements. The experimental set-up was tested with some standard samples.
Lal, R. B.↗
Ironless-armature brushless motor
Device uses 12-pole samarium cobalt permanent-magnet rotor and three Hall-effect sensors for commutation. In prototype motor, torque constant (3-phase delta) is 65 oz-in/amp; electrical time constant (L/R) is 0.2 x 0.001 sec, and armature resistance is 20 ohms.
Fisher, R. L.↗
Exploratory study on microanalysis of thin films by backscattering techniques
Solid phase epitaxial growth of Si layers was studied by backscattering spectrometry for controllable electrical characteristics. Samples were fabricated by vacuum deposition on a thin layer of Sb before deposition of the amorphous Si layer. Analysis of the resulting SPEG layer showed that Sb was present in the SPEG layer of Si. The characteristic of the SPEG layer against the Si substrate was rectifying. A scanning microprobe picture of a cleaved sample established the presence of a depletion region more than 1 micron below the surface. Hall effect data indicated that the SPEG layer was n-type, with average free carrier concentration of about 10 to the 19th power cm/3 and average electron mobility of about 40 sq cm/Vs. SPEG with Pd silicide or Ni silicide transport layers showed fast initial transient growth regimes with slower growth in the steady state regimes.
Mayer, J. W.↗
A relationship between synchronous-altitude electron fluxes and the auroral electrojet, appendix A
Simultaneous observations during four substorms are reported from the Lockheed auroral particle spectrometer on ATS-5 and the University of Alberta meridian magnetometer chain (Canada). During the four events studied, there was a good correlation between the magnitude of the trapped electron fluxes in the energy range from 1.8 to 53 keV and the magnitude of the electrojet current as measured by a station in the magnetometer chain at a latitude close to that expected for the ATS conjugate point. The Hall effect was studied and a model electrojet was constructed which gave a good absolute agreement between the two measured quantities. The results are consistent with the convection electric field remaining approximately constant during a substantial portion of each of the substorms studied. The temporal variations of the electrojet were apparently controlled by conductivity changes in the ionosphere as determined by the precipitating auroral electrons.
Sharp, R. D.↗
Experimental development of processes to produce homogenized alloys of immiscible metals, phase 3
An experimental drop tower package was designed and built for use in a drop tower. This effort consisted of a thermal analysis, container/heater fabrication, and assembly of an expulsion device for rapid quenching of heated specimens during low gravity conditions. Six gallium bismuth specimens with compositions in the immiscibility region (50 a/o of each element) were processed in the experimental package: four during low gravity conditions and two under a one gravity environment. One of the one gravity processed specimens did not have telemetry data and was subsequently deleted for analysis since the processing conditions were not known. Metallurgical, Hall effect, resistivity, and superconductivity examinations were performed on the five specimens. Examination of the specimens showed that the gallium was dispersed in the bismuth. The low gravity processed specimens showed a relatively uniform distribution of gallium, with particle sizes of 1 micrometer or less, in contrast to the one gravity control specimen. Comparison of the cooling rates of the dropped specimens versus microstructure indicated that low cooling rates are more desirable.
Reger, J. L.↗
Evaluation of silicon ribbon material for solar cell fabrication
Optical microscopy, electron microscopy, and X-ray diffraction were utilized to characterize silicon ribbon structure. Complex twin formation was observed in nearly all ribbons examined. Twins formed in the 110-plane 112-line ribbon orientation appear stable, and this orientation may be preferable when the ribbon is utilized for solar cells. In addition to twinning, grain boundaries and other structural defects were observed in the ribbon material. Hall effect, resistivity, spreading resistance, surface photovoltage, and solar cell electrical/optical measurements were performed on ribbon samples and correlated with structural and ribbon growth characteristics. Only those ribbon samples with either single-crystal structure or with 'parallel' twin formations were capable of solar-cell performance approaching that of Czochralski material.
Leipold, M.↗
Noncontacting valve-position indicator
Position of sealed valve or other movable part is indicated without penetrating housing. Flux from magnets connected to stem of hydraulic valve penetrates pressure wall and is sensed by Hall-effect transducer outside wall. When valve closes, moving stem and magnets, voltage from transducer decreases; thus, stem position is indicated without physical contact.
Crovella, E. A.↗
Development of doped-germanium photoconductors for astronomical observations at wavelengths from 30 to 120 micrometers
Technology was developed for production of doped-germanium detectors which have optimized performance in the 30- to 120-micrometer wavelength range and are capable of achieving the objectives of the Infrared Astronomy Satellite space mission. The work of this phase was divided into the following major tasks: (1) growth of Ge:Ga crystals from high-purity starting material with Ga concentrations different from that previously produced, and development of a zone leveling method to produce a uniform Ga doping concentration; (2) growth of uncompensated Ge:Be crystals from high-purity starting material with a range of Be concentrations between 10 to the 14th power and 10 to the 16th power atoms/cubic cm; (3) evaluation of crystals by means of Hall effect and resistance measurements as a function of temperature; (4) fabrication and test of detectors made from both Ge:Be and Ge:Ga crystals to determine the relative performance between different crystals. Correlation of detector test data with material evaluation data and analysis of how to further optimize detector performance.
Bratt, P. R.↗
Ionized dopant concentrations at the heavily doped surface of a silicon solar cell
Data are combined with concentrations obtained by a bulk measurement method using successive layer removal with measurements of Hall effect and resistivity. From the MOS (metal-oxide-semiconductor) measurements it is found that the ionized dopant concentration N has the value (1.4 + or - 0.1) x 10 to the 20th power/cu cm at distances between 100 and 220 nm from the n(+) surface. The bulk measurement technique yields average values of N over layers whose thickness is 2000 nm. Results show that, at the higher concentrations encountered at the n(+) surface, the MOS C-V technique, when combined with a bulk measurement method, can be used to evaluate the effects of materials preparation methodologies on the surface and near surface concentrations of silicon cells.
Weinberg, I.↗
Electronic properties of PbMo6S8 and CuxMo6S8
Normal-state properties of sputtered, evaporated, and sintered PbMo6S8 and CuxMo6S8 (where x is between 1.6 and 2.5) samples are reported. These include the temperature dependence of resistivity, magnetoresistance, and Hall effect. When combined with superconducting properties (measured on the same samples) and theory, a number of Fermi-surface and superconducting parameters are derived. Fits to the temperature dependence of the resistivity are compared with similar fits for A-15 structure superconductors.
Woollam, J. A.↗