Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOSPITALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Identification of Potential Locations for Placement of Strategic Transformers Reserve in Puerto Rico

Extreme weather events such as tropical storms cause extensive damage to energy infrastructures including generator stations, substations, poles, transformers, power transmission lines, etc. due to their presence in hazardous locations. Often these damages lead to long term power outage as was seen in Puerto Rico (PR) following the landfall of Hurricane Maria (2017). A potential solution to long-term power outage is strategic placement of reserve generators and transformers that would ensure continued power supply to enable restoration and recovery activities. The strategic placement of energy storage devices requires identification of potential sites such that (i) the damage from extreme events to energy infrastructures is minimized, (ii) power supply is optimized, and (iii) installation of these infrastructures is cost effective. To meet this goal, in this research, a Multi-Criteria Evaluation (MCE) technique-based site suitability analysis was implemented to identify potential sites for reserve generators and transformers in PR. To determine suitable sites and existing government facilities, the following steps were implemented: (i) identify physical, environmental, technical and socio-economic factors contributing to site suitability; (ii) determine siting constraints based on guidelines and standards used for energy sector (i.e., siting of nuclear plants, solar or wind farms), (iii) implement a raster data model using 30m x 30m spatial resolution to create suitability layers for each factor, (iv) combine suitability and exclusionary layers to create the final suitability layer. Results show that six hospitals, four colleges and universities, and five correctional facilities are in very high suitability areas and could be used for to store reserve generators. These facilities are in the eastern, south-eastern, south-western, and southern part of the island except for one correctional facility that is in the northern part of PR. Not surprisingly, coastal areas were found to be unsuitable for siting any energy facility. More than half (55.9%) of the island was also found to be unsuitable while only 14% of the island was found to be very highly suitable. Further assessment of current power plants and sub-stations indicated that only 16% and 42% of existing power plants and sub-stations respectively are in suitable areas. Given that northern part of the island lacks any facility that could be used for placement of reserve generators, suitable sites identified in this region could be used for placement of storage devices.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2017

Resilient Solar and Storage Roadmap

Resilience to natural disasters is imperative for safe, economically productive cities. In the immediate aftermath of an earthquake, flood, or other disaster, one key element of resilience is continued operation of shelters and critical emergency management facilities. Operation of these facilities depends on reliable emergency power. Traditional emergency power systems use diesel generators with storage tanks, which provide power for only a few days in the absence of the electric or gas grid. However, a recent study has shown that gas and electric networks can require days or weeks to recover from a disaster, leaving facilities with generators at risk of running out of fuel. This has already been experienced in New York City after Hurricane Sandy where a combination of lengthy outages and high flood waters compromised the traditional diesel storage and generator backup infrastructure at hospitals and shelters. With the risk of natural disasters increasing due to climate change, we must turn to more resilient solutions for providing backup power to shelters, medical centers, and emergency operations centers. From 2015 to 2017, the City and County of San Francisco Solar and Storage for Resilience Project examined the use of microgrids and stand-alone solar electric generation with battery storage to provide resilient post-disaster power to critical facilities. The project evaluated 1,263 potential congregation and shelter sites across the city, 67 of which were identified as shelter sites with power requirements and opportunities to develop resilient infrastructure through solar and storage. Site visits were conducted for 18 of these buildings, spanning all 11 supervisor districts in San Francisco and a range of normal and emergency use types. The project team used observations from these site visits to create representative emergency power profiles for all 67 shelters in San Francisco. Using these profiles, the team found that 8.2 megawatts (MW) of photovoltaic panels and 12.9 MW of battery storage would be required to provide resilient backup power for San Francisco’s shelters following a disaster. Given the high capital cost of deploying this large resource, the project team investigated various financing options — a public-private partnership was found to be a viable pathway for financing resilient solar and storage. Given the added benefit of energy cost savings in normal operation, a public-private partnership financing model would save the City and County of San Francisco 6% over a traditional design-bid-build approach over a 20-year portfolio lifetime. This roadmap documents the project’s steps of identifying critical facilities, surveying power requirements, assessing renewable potential, evaluating financing options to develop the solar and storage systems for resiliency, and modeling individual sites for solar and storage installation. This roadmap also examines the challenges critical facilities face in providing resilient power, such as key technical, political, and financing barriers, as well as the opportunities and policy recommendations to further advance resilient solar and storage development in San Francisco. While this report focuses on a detailed study of San Francisco, the methods and outcomes are applicable to any city or town.

14 SOLAR ENERGY↗
DOE OSTI2019

Helping health workers understand unfolding outbreaks

Imagine you’re in the public health field, perhaps an epidemiologist, tasked with tracking diseases causing serious health problems in your area – especially new diseases that you have only seen reported in distant lands. If dengue, for example, suddenly sends scores of people to a hospital in the southern part of your state, local decision makers would turn to you to predict the steps needed to prevent an outbreak in your region.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Fire- and Water-Resistant Prefilter

The goal of this project was to modify existing LLNL ceramic HEPA filter technology to create ceramic prefilters, which could first be implemented in nuclear facilities or hospitals and universities. The objectives were as follows: 1) Demonstrate sealing technology capable of withstand ≥ 400°C, 2) Design and fabricate a ceramic prefilter unit for flow rates ≥ 50 cfm, 3) Test prefilter prototype filtration efficiency and pressure drop before and after a relevant thermal exposure. Concurrently to prototype creation was a preliminary effort to develop a custom nuclear prefilter sealant, improving upon what is commercially available. An advantage to using prefilters that are not credited for HEPA filtration, but to protect HEPA filters in nuclear ventilation systems, is that absolute qualified performance to HEPA standards (e.g. pressure drop, filtration efficiency) is not required. This prefilter prototype aligns our technology with the more viable, lower risk market entry point which can be used to establish costs, performance and manufacturing principles necessary to overcome the primary market barrier.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Jiangsu Nanjing – Lawrence Berkeley Life Sciences Center for Translational Medicine (CRADA AWD00000392)

Project 1: Our previous work demonstrated that the CES biomarker can be an approximate measure for the levels of chromosomal instability (CIN) in cancer, and that the CES (for Centromere and kinetochore gene Expression Score) biomarker effectively predicts which cancer patients benefit from adjuvant chemotherapies in lung and other cancer types. Such a utility can potentially reduce overtreatment that is common in lung cancer treatment. We determined performance of the multiplex Quantigene RNA assay platform for measuring mRNA levels of CES genes using clinical tumor samples. These experiments determined sensitivity, specificity and detection limit of 12 CES genes and 5 control genes using clinical tumor samples with paired normal tissue samples. We determined how sample concentration and storage conditions affect measurement sensitivity and specificity, and whether sample storage over time affects result reproducibility. Importantly, we confirmed that early stage lung cancer CES values are significantly higher than those of paired normal tissues in all cases. This result greatly extended our bioinformatic data mining by confirming that we can measure CES values directly from patient tumor tissue, and that tumors have higher CES values than normal tissues. Unfortunately, our CRADA partner in China did not finish measuring CES expression levels for a larger group of ~100 tumor samples, due to the long period time required for human subject review in China. This delay prevented us from generating enough additional data to generate a significant statistical model. We finished analyzing all the data acquired during the CRADA, and are trying to work collaboratively with the Shanghai University Lung Cancer Hospital to complete the analysis of more tumor samples. Although no publications have resulted from this research, the findings are crucial for ongoing efforts to obtain funding to develop the technology to address problems in deciding on appropriate treatment regimens for individual patients, in clinical settings. Project 2: The overarching milestones of CRADA Project 2 were to investigate the role of FAM83 family members in cancer progression. Two publications resulted from this work which are highlighted below. The first major goal of the CRADA was to broadly assess the role of FAM83 family oncogenes in human cancer using a multi-omic bioinformatic approach (Snijders et al 2017 Mol. Oncol 11). The second major goal was to specifically assess the role of FAM83D in a cancer progression and metastasis (Yin et al 2019 Cell Oncol; in revision). Role of FAM83 family oncogenes in human cancers Recent studies from our laboratory as well as other groups have demonstrated that FAM83 family members have oncogenic properties and have significantly elevated expression levels in multiple human tumor types, including breast cancers (BC). We performed an integrative multi-omics bio-informatic analysis of the role of FAM83 family oncogenes in human cancers. Our findings were published in the journal Molecular Oncology (Snijders et al; Mol Oncol. 2017 Feb;11(2):167-179). Highlights from this manuscript are: • Transcriptional levels of FAM83 family members are frequently and dramatically elevated across tumor types in human • DNA copy number increase appears to be a potential mechanism for increased expression of FAM83 genes • FAM83 family gene signature is associated with poor survival across human tumor types • FAM83 gene alterations are significantly correlated with TP53, PIK3CA and Ecadherin mutations. In conclusion, this analysis of FAM83 family members opened up a new horizon for further understanding the significance of FAM83 genes in cancer and clinical applications in diagnosis, prognosis and therapy. Role of FAM83D in human non-small cell lung cancer (NSCLC) metastasis and its impact on chemotherapy. Lung cancer is one of the most common malignant tumors in the world and non-small cell lung cancer (NSCLC) accounts for 80~85% of all diagnosed lung cancer cases, one of the deadliest cancers worldwide. FAM83D has been proposed as an oncoprotein in several types of human cancer, yet its role and molecular mechanism in human non-small cell lung cancer (NSCLC) metastasis and its impact on chemotherapy are poorly understood. We evaluated the expression of FAM83D in NSCLC cells and cancerous tissues and its prognostic significance, then investigated the effect of FAM83D on tumorigenic phenotypes such as cell proliferation, EMT and invasive capability, and finally assessed impact of FAM83D on NSCLC chemo-drug resistance. The results of this study are currently in revision at the journal Cellular Oncology. Highlights from this manuscript are: • FAM83D expression is elevated in NSCLC cells and tissues and associated with poor prognosis • FAM83D promotes NSCLC cell proliferation • FAM83D induces EMT in NSCLC cells • FAM83D promotes NSCLC cell migration and invasion • FAM83D promotes EMT and invasive capability of NSCLC cells by regulating AKT/mTOR pathway • FAM83D silencing increases cisplatin sensitivity of NSCLC cells In summary, this second study demonstrated for the first time that FAM83D promoted EMT and metastasis of NSCLC cells through AKT/mTOR signal pathway as well as increased the sensitivity of NSCLC to cisplatin. This study may provide potential targets for advanced NSCLC treatment and personalized therapy.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Moly 99 Reactor Case Study

Molybdenum-99 (Moly 99) is a critical raw material for Technetium (Tc) 99m, a radioactive isotope most widely used in nuclear medicine procedures. Moly 99 has a short half-life of about six hours, which means it cannot be stockpiled. When Moly 99 decays, it turns into Tc 99m, which has a half-life of 214,000 years. The photon energy emitted from the decay of Moly 99 is used in a variety of nuclear imaging technologies such as gamma cameras. Furthermore, radiopharmaceutical manufacturers use the photon energy emitted from the decay of Moly 99 to produce generators for hospitals, clinics, and radiopharmacies. Once Moly 99 decays to Tc 99m, it is used to make individual patient doses for a variety of diagnostic imaging procedures. The Moly 99 Reactor Design is a conceptual blueprint for Moly 99 production that does not use weapon-grade uranium; instead, the reactor has a target core of low-enriched uranium. The reactor design is small, reaching a foot-and-a-half in height and diameter and consumes less than two megawatts of power. The reactor's only purpose is for medical isotope production and with every fission, Moly 99 is produced.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Facility Location Optimization Model for COVID-19 Resources

In response to anticipated resource shortfalls related to the treatment and testing of COVID-19, many communities are planning to build additional facilities to increase capacity. These facilities include field hospitals, testing centers, mobile manufacturing units, and distribution centers. In many cases, these facilities are intended to be temporary and are designed to meet an immediate need. When deciding where to place new facilities many factors need to be considered, including the feasibility of potential locations, existing resource availability, anticipated demand, and accessibility between patients and the new facility. In this project, a facility location optimization model was developed to integrate these key pieces of information to help decision makers identify the best place, or places, to build a facility to meet anticipated resource demands. The facility location optimization model uses the location of existing resources and the anticipated resource demand at each location to minimize the distance a patient must travel to get to the resource they need. The optimization formulation is presented below. The model was designed to operate at the county scale, where patients are grouped per county. This assumption can be modified to integrate other scales or include individual patients.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Q and A with the grandson of the Little Boy’s pilot: Brigadier General (retired) Paul Tibbets IV reflects on his family’s legacy military service

Paul Tibbets Jr., the pilot of the Enola Gay who released the Little Boy atomic bomb above Hiroshima, is part of a family with a legacy of military service. He was father to Paul Tibbets III, who served in the military as an Army reservist pharmacist and hospital administrator and eventually retired as a colonel. His son— grandson of Tibbets Jr.—is also Paul Tibbets. Paul Tibbets IV is a retired Air Force brigadier general and decorated bomber pilot. This legacy is not lost on his fellow airmen. They gave Tibbets IV the callsign “Nuke” early in his flying career. Tibbets IV flew the B-1 bomber and then the B-2 stealth bomber, a nuclear-capable, longrange strike aircraft. His 29 years of military service include combat missions in the Middle East, Afghanistan, and the Balkans—and a flight in a restored B-29 with his grandfather. In commemoration of the 75th anniversary of the atomic bombs and his grandfather’s historic role, Tibbets IV spoke with Los Alamos National Laboratory.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2020

Antibacterial Minerals: A geochemical approach to combating antibiotic resistance

The rapid rise of antibiotic resistant bacteria is seriously threatening our ability to treat lifethreatening infections. As a result, our approach to medicine and agriculture will require significant changes if we are to successfully maintain current levels of healthcare and food security. Certain naturally occurring clays have been shown to harbor antimicrobial properties and kill antibiotic resistant bacteria. These clays have been proposed as a new paradigm for fighting the potentially devastating effects of the post antibiotic era. However, natural samples, by their inherent properties, exhibit variable antibacterial effectiveness and the synthesis of minerals with reproducible antibacterial activity is needed. Our project focused on 3 specific aims; 1) develop synthetic versions of naturally occurring bactericidal minerals to control the chemical purity and antibacterial potency, 2) determine how effective these mineral formulations are at killing antibiotic resistant bacteria and 3) investigate the response of human skin cell cultures to these antibacterial minerals. Utilizing hydrothermal based methods our team was able to reproduce the antibacterial activity observed in natural antibacterial minerals, while eliminating unwanted elemental impurities. Importantly, we were able to create a mineral based bactericide that has reproducible reactivity that could provide a consistent dose response. These antibacterial mineral formulations are effective at killing common hospital acquired antibiotic resistant bacteria while providing minimal toxicity to human fibroblasts. Our research has optimized the antibacterial properties of antibacterial minerals to allow greater efficacy from a public health perspective.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Modeling efficient and equitable distribution of COVID-19 vaccines

Producing and distributing COVID-19 vaccine during the pandemic is a major logistical challenge requiring careful planning and efficient execution. This report presents information on logistical, policy and technical issues relevant to rapidly fielding a COVID-19 vaccination program. For this study we (a) conducted literature review and subject matter expert elicitation to understand current vaccine manufacturing and distribution capabilities and vaccine allocation strategies, (b) designed a baseline vaccine distribution strategy and modeling strategy to provide insight into the potential for targeted distribution of limited initial vaccine supplies, and (c) developed parametric interfaces to enable vaccine distribution scenarios to be analyzed in depth with Sandias Adaptive Recovery Model that will allow us evaluate the additional sub- populations and alternative distribution scenarios from a public health benefit and associated economic disruption Principal issues, challenges, and complexities that complicate COVID-19 vaccine delivery identified in our literature and subject matter expert investigation include these items: The United States has not mounted an urgent nationwide vaccination campaign in recent history. The existing global manufacturing and distribution infrastructure are not able to produce enough vaccine for the population immediately. Vaccines, once available will be scarce resources. Prioritization for vaccine allocation will be built on existing distribution networks. Vaccine distribution may not have a universal impact on disease transmission and morbidity because of scarcity, priority population demographics, and underlying disease transmission rates. Considerations for designing a vaccine distribution strategy are discussed. A baseline distribution strategy is designed and tested using the Adaptive Recovery Model, which couples a deterministic compartmental epidemiological model and a stochastic network model. We show the impact of this vaccine distribution strategy on hospitalizations, mortality, and contact tracing requirements. This model can be used to quantitatively evaluate alternative distribution scenarios, guiding policy decisions as vaccine candidates are narrowed down.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Use of Commercial Off-The-Shelf Parts with 3-D Printed Connectors for Powered Air Purifying Respirators

This report presents preliminary results from the performance evaluation of a powered air purifying respirator (PAPR) assembled from commercial off-the-shelf (COTS) parts. Cost is a major limiting factor to PAPR adoption in healthcare. Moreover, the lack of standardization for filters and batteries poses a challenge for clinics and hospitals. Rapid prototyping of connectors, both mechanical and electrical, offers a possible solution in addressing both issues. We used 3-D printed connectors to assemble COTS components into a prototype PAPR. Large-scale manufacturing of 3-D printed connectors may be accomplished by converting the computer-aided design (CAD) drawings to pressure-injection molds.

42 ENGINEERING↗
DOE OSTI2020

Sitewide Environmental Impact Statement Site 300 and Arroyo Mocho Lawrence Livermore National Laboratory Alameda and San Joaquin Counties, California (Mid-Term Report)

At the request of Lawrence Livermore National Security (LLNS), Nomad Ecology (Nomad) conducted sensitive botanical resource surveys, and vegetation mapping and classification of the 7,000-acre Lawrence Livermore National Laboratory (LLNL) Experimental Test Site (Site 300) and 17 acres surrounding the Arroyo Mocho pumping station and the access road to the pumping station (Arroyo Mocho). In addition to surveying for sensitive botanical resources, Nomad also compiled existing rare plant and vegetation data provided by LLNL from past monitoring and environmental impact evaluations. The results of these efforts will provide supporting information for a Site-wide Environmental Impact Statement (SWEIS). These surveys were conducted during the months of April – June, and August 2020. Rare plant surveys were scheduled for February and March 2020; however, February surveys were not initiated because the contract for this work was not finalized, and March surveys were cut short due to the timing of the Covid-19 shelter in place. February and March rare plant surveys are scheduled for 2021; therefore, the rare plant survey results in this report should be considered incomplete until the 2021 surveys are conducted. A total of 10 special status plant species were recorded within Site 300 and Arroyo Mocho. Of these 10, three were not previously recorded within the study areas, and include Hospital Canyon larkspur (Delphinium californicum subsp. interius), Jepson’s woolly sunflower (Eriophyllum jepsonii), and Michael’s rein orchid (Piperia michaelii), which all occur at Arroyo Mocho. Special status plant species known from these two sites total 23 rare plant occurrences (populations), which represent an estimated 50,929 rare plant individuals. This total of all special status plant species breaks down to one occurrence of a federally and/or state listed plant species (98 individuals), six occurrences of California Rare Plant Rank (CRPR) 1 & 2 species (49,010 individuals), and 16 occurrences of CRPR 3 & 4 species (1,821 individuals). A total of 35 vegetation communities were mapped at Site 300, of which 20 are considered Sensitive Natural Communities. A total of nine vegetation communities were mapped at Arroyo Mocho, of which two are considered Sensitive Natural Communities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Integrating Health and Energy Efficiency in Healthcare Facilities

In this report, PNNL presents a review of literature and current best practices along the intersection of energy efficiency and occupant health at U.S. healthcare facilities, including federally owned buildings. This report includes a review of building standards and certification systems for healthcare indoor environmental quality (IEQ) and research on building measures that optimize occupant health and energy efficiency. The healthcare industry includes a wide variety of services and thus facility types. This case study focuses primarily on inpatient facilities, such as hospitals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Lab Home Testing of Residential Isolation Space Control to Minimize Infectious Disease Transmission in Existing Single-Family Homes

Existing evidence strongly suggests that viral infectious diseases can be transmitted via an airborne route across distances in indoor environments. Accordingly, the risk of airborne transmission within homes should be managed. The public health emergency associated with SARS-CoV-2 makes controlling airborne transmission of respired viruses in indoor environments critical, especially in poorly ventilated indoor environments. The effectiveness of engineering interventions requiring minor efforts that create a negative-pressure isolation zone (IZ) for a contagious person has yet to be tested for existing residential homes. To mitigate the risk of airborne virus transmission and maximize health protection for the population in existing single-family homes, the relative effectiveness of several control strategies are investigated in this report. While very high-efficiency MERV filtration, high ventilation rates, and other controls can help be effective, most occupants are not likely to have the time or means for advanced measures found in hospitals. This project focused on testing relatively simple efforts that utilize existing or easy to acquire materials and simple processes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Changes in When and Where People are Spending Time in Response to COVID-19

The COVID-19 pandemic has resulted in a significant change in driving behavior as people respond to the new environment. However, existing methods for analyzing driver behavior such as travel surveys and travel demand models are not suited for incorporating abrupt environmental disruptions. To address this, we analyze a set of high-resolution trip data and introduce two new metrics for quantifying driving behavioral shifts as a function of time, allowing us to compare the time periods before and after pandemic began. We apply these metrics to the Denver, Colorado metropolitan statistical area (MSA) to demonstrate the utility of the metrics. Then, we present a case study for comparing two distinct MSAs, Louisville, Kentucky; and Des Moines, Iowa which exhibit significant differences in the makeup of their labor markets. The results indicate that although the regions of study exhibit certain unique driving behavioral shifts, emerging trends can be seen when comparing between seemingly distinct regions. For instance, drivers in all three MSAs are generally shown to have spent more time at residential locations and less time in workplaces in the time period after the pandemic started. In addition, workplaces that may be incompatible with remote working, such as hospitals and certain retail locations, generally retained much of their pre-pandemic travel activity.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Sensitive Botanical Resources Surveys and Vegetation Mapping for the LLNL Sitewide Environmental Impact Statement, Arroyo Mocho, Lawrence Livermore National Laboratory, Alameda County, California

At the request of Lawrence Livermore National Security (LLNS), Nomad Ecology (Nomad) conducted sensitive botanical resource surveys, and vegetation mapping and classification of the 17 acres surrounding the Arroyo Mocho pumping station and the access road to the pumping station (Arroyo Mocho). The results of these efforts will provide supporting information for a Site-wide Environmental Impact Statement (SWEIS). These surveys were conducted during the months of April and May 2020, and March 2021. A total of three special status plant species were recorded within Arroyo Mocho. All three species – Hospital Canyon larkspur (Delphinium californicum subsp. interius), Jepson’s woolly sunflower (Eriophyllum jepsonii), and Michael’s rein orchid (Piperia michaelii) – were not previously recorded within the study area at Arroyo Mocho. Special status plant species known from the study area total three rare plant occurrences (populations4), which represent an estimated 50 rare plant individuals. This total of all special status plant species breaks down to one occurrence of California Rare Plant Rank (CRPR) 1 & 2 species (42 individuals), and 2 occurrences of CRPR 3 & 4 species (8 individuals). A total of nine vegetation communities were mapped at Arroyo Mocho, of which two are considered Sensitive Natural Communities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Converter-Interfaced CHP Plant for Improved Grid-Integration, Flexibility and Resiliency

GE Research and its partner GE Renewables have proposed the use of an interface converter solution to increase the penetration of small to medium-sized CHP (1MWe to 20MWe) into distribution grids and improve their flexibility and grid support capability. Indeed, the proposed interface converter solution thanks to presence of the grid-ready inverter, allows to streamline the compliance to grid codes requirements, reduce the interconnection delays and costs and ultimately one of the main barriers for CHP adoption by commercial and industrial facilities. An additional benefit provided by the interface converter is the use of the grid-ready inverter for reactive power which eliminates the need of sizing the generator for that capability. These two benefits highly favor the economic feasibility of converter-interfaced CHP. Five user cases, each in one of the leading U.S states for CHP potential reported by the DOE in its estimation of the U.S Technical Potential of CHP, were selected to compare the economic performances of converter-interfaced CHP as compared with directly-coupled. They include a college campus in California, a hospital in New York, a water reclamation plant in Texas, a hotel in Minnesota, and a large office building in Pennsylvania. Results showed that, the presence of the interface converter allows to increase the return on investment (ROI) by 0.5 to 2 percentage points in most of the cases (4 of 5). Indeed, the interface converter by shortening the interconnection process allows to accelerate revenues while reducing interconnection costs. Added to the reduced cost of the required generator these savings trade favorably the capital cost of the converter. The analysis also showed that the profitability of the converter-interfaced CHP is highly sensitive to the energy price, interconnection delay, and converter cost. However, it appears that if the interface converter can shorten the interconnection process by at least 6 months, adopting this solution will be more economically viable than directly-coupled configuration in almost all the +23,000 sites of the U.S Technical Potential CHP. The evaluation of the benefits of a converter-interfaced CHP also showed that it enables higher ROI when coupled with other distributed energy resources (DER) such as battery energy systems (BESS) or solar photovoltaic (PV). Indeed, in those scenario, the grid-ready inverter included in the interface converter eliminates the need of separate inverters if DC-coupling is used. On the technical performance, it has been verified that the presence of the interface converter allows to reduce by 70% to 80% the CHP short-circuit contribution to grid faults. This not only reduces the mechanical and thermal stresses exposed to the CHP electrical components but also increases the grid hosting capacity which ultimately enables higher penetrations CHP. Another key benefit of the interface converter validated with hardware-in-the-loop simulations and testing is its superior capability for reactive power support. Indeed, using a power hardware testbed with two +700kW inverters configured in back-to-back, a microgrid controller and actual facilities loads it was demonstrated that the presence of the interface converter can help maintain a power factor near ~1 or regulate the voltage to ~1.0pu at the point of common coupling. This benefit can be highly valuable if in the future, due to higher penetration of renewable distributed energy resources (DER), utilities start billing demand charge based on kVA instead of kW as currently. It was also validated that converter-interfaced CHP can dispatch heat and power commands and seamlessly switch between the two modes while consistently controlling the power factor or voltage at PCC. Indeed, the power hardware testing showed that grid-connected converter-interfaced CHP can follow either the power or heat demand while maintaining a unity power factor at converter output. This research proved that the adoption of an interface converter as the solution for interconnection of CHP system into the distribution grid can greatly improve the economic feasibility of small to medium-sized CHP as well as the plant power quality, flexibility and resiliency. Additionally, it allows increased penetrations of CHP into the distribution grid, extends their grid support capability, and facilitates the integration of BESS and PV DER by streamlining their collocation within the same facilities. This ultimately provides an opportunity for commercial and small industrial facilities in the U.S to accelerate their energy transition thanks to the high energy efficiency of CHP systems and its reliable, flexible, and resilient microgrid operation when interconnected with an interface converter.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Supercritical CO2 sterilization of N95 Masks

A preliminary investigation of the use of supercritical carbon dioxide for treating of 3M 1860 N95 masks was undertaken to evaluate a potential route to low-cost, scalable, sterilization of personal protective equipment for multiple reuse in hospital settings. Upon entering the supercritical regime, the normally distinct liquid and gaseous phases of CO 2 merge into a single homogeneous phase that has density, short-range order, and solvation capacity of a liquid, but the volume-filling and permeation properties that of a gas. This enables supercritical CO2 to function as a vehicle for delivery of biocidal agents such peracetic acid into microporous structures. The potentially adverse effect of a liquid-to-gas phase transition on mask filter media is avoided by conducting cleaning operations above 31 C, the critical temperature for carbon dioxide. A sample of fifteen 3M 1860 N95 masks was subjected to ten consecutive cycles of supercritical CO 2 cleaning to determine its effect on mask performance. These 15 masks, along with 5 control samples then underwent a battery of standardized tests at the CDC NIOSH NPPTL research facility in Pittsburgh, PA. The data from these tests strongly suggest (but do not prove) that supercritical carbon dioxide do not damage 3M 1860 N95 masks. Additional tests conducted during this project confirmed the compatibility of supercritical CO 2 with ventilator tubing that, like N95 masks, has been in short supply during portions of the COVID-19 pandemic and cannot be sterilized by conventional means. Finally, a control experiment was also conducted to examine the effect of supercritical CO 2 on a BSL-2 surrogate virus, vesicular stomatitis virus (VSV), Indiana serotype strain. In the absence of biocidal additives, supercritical CO 2 exhibited no measurable lethality against VSV. This surrogate virus experiment suggests that a biocidal additive such as peracetic acid will be necessary to achieve required sterilization metrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗