Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HARDNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Low Temperature Unbalanced Magnetron Deposition of Hard, Wear-Resistant Coatings for Liquid-Film Bearing Applications

The original program for evaluating the tribological properties several different hard coatings for liquid film bearing applications was curtailed when the time for the program was reduced from 3 years to 1. Of the several different coatings originally planned for evaluation, we decided to concentrate on one coating, carbon nitride. At BIRL, we have been instrumental in the development of reactively sputtered carbon nitride coatings, and we have found that it is a very interesting new material with very good tribological properties. In this program, we found that the reactively sputtered carbon nitride does not bond well directly to hardened 440C stainless steel; but if an interlayer of titanium nitride is added between the carbon nitride and the 440C, the adhesion of the dual coating combination is very good. Statistically designed experiments were run with the dual layer combination, and 3 variables were chosen for the Box-Benken design, which were the titanium nitride interlayer thickness, the nitrogen partial pressure during the reactive sputtering of the carbon nitride, and the carbon nitride substrate bias voltage. Two responses were studied from these three variables; the adhesion of the dual coating combination to the 440C substrate and the friction coefficient of the carbon nitride in dry sliding contact with 52100 steel in air. The best adhesion came with the thickness interlayer thickness studied, which was 4 micrometers, and the lowest coefficient of friction was 0.1, which was achieved when the bias voltage was in the range of -80 to - 120 V and the nitrogen partial pressure was 3 mTorr.

Sproul, William D.↗
NASA NTRS1997

The Interrelation of Soft and Hard X-ray Emission During Solar Flares

The objective of this project is to determine the characteristics of flare energy transport processes through the study of soft X-rays, hard X-rays, and their interrelationships through analysis of Yohkoh SXT, HXT, and BCS data, and comparison with theoretical models. The personnel involved in the research include SSL Assistant Research Physicists Dr. Peng Li and Dr. James McTiernan.

Fisher, George H.↗
NASA NTRS1996

Energetics of impulsive solar flares: Correlating BATSE hard x-ray bursts and the solar atmosphere's soft x-ray response

This investigation has involved the correlation of BATSE-observed solar hard X-ray emission with the characteristics of soft X-ray emitting plasma observed by the Yohkoh Bragg Crystal Spectrometers. The goal was to test the hypothesis that localized electron beam heating is the dominant energy transport mechanism in impulsive flares, as formulated in the thick-target electron-heated model of Brown.

Newton, Elizabeth↗
NASA NTRS1997

Hard X-Ray Emission of X-Ray Bursters

The main results from this investigation were serendipitous. The long observation approved for the study of the hard X-ray emission of X-ray bursters lead, instead, to one of the largest early samples of the behavior of fast quasi-periodic oscillations (QPOS) in an atoll sources. Our analysis of this data set lead to the several important discoveries including the existence of a robust correlation between QPO frequency and the flux of a soft blackbody component of the X-ray spectrum in the atoll source 4U 0614+091.

Kaaret, Phillip↗
NASA NTRS1997

Rad-Hard/HI-REL FPGA

The goals for a radiation hardened (RAD-HARD) and high reliability (HI-REL) field programmable gate array (FPGA) are described. The first qualified manufacturer list (QML) radiation hardened RH1280 and RH1020 were developed. The total radiation dose and single event effects observed on the antifuse FPGA RH1280 are reported on. Tradeoffs and the limitations in the single event upset hardening are discussed.

Jih-Jong Wang↗
NASA NTRS1998

Long Term Hard X-ray Monitoring of X-ray Bursters

This grant supported our analysis of BATSE occultation data on x-ray bursters and neutron star low mass x-ray binaries (LMXBs) from the Compton Gamma-ray Observatory carried out under observing cycle 6. The work carried out under this grant was closely related to our separate investigation (NAG5-3808) to develop a prototype BATSE imaging survey for faint transients. In this Final Report, we summarize the Scientific Objectives of this investigation of hard x-ray studies of bursters and the Results Achieved; and finally the Papers Published.

Grindlay, Jonathan E.↗
NASA NTRS1997

Graded Multilayers not Required for Hard-X-Ray Imaging

For a given x-ray optic, a graded-multilayer coating extends the energy response to higher energies. However, this does not imply that graded multilayers are required for efficient hard-x-ray focusing. Indeed, smaller x-ray optics using conventional coatings provide advantages - namely, greater effective area per unit mass, less diffractive scattering by surface micro-roughness, and demonstrated feasibility - over larger optics coated with multilayers.

Weisskopf, M. C.↗
NASA NTRS1998

Hard X-Ray and Wide Focusing Telescopes

Studies are being carried out to compare the performance of several different separation materials used in the replication process. This report presents the results obtained during the second year of a program which consists of replicating smooth, thin substrates, depositing multilayer coatings upon them, and evaluating their performance. Replication and multilayer coatings are both critically important to the development of focussing hard X-ray telescopes that function up to 100 keV. The activities of the current year include extending the comparison between sputtered amorphous carbon and evaporated gold to include sputtered as well as evaporated gold. The figure of merit being the smoothness of the replica which has a direct effect on the specular reflectivity. These results were obtained with epoxy replication, but they should be applicable to electroformed nickel, the process we expect to use for the ultimate replicated optics.

Gorenstein, Paul↗
NASA NTRS1998

Soft X-Ray Spectra of AGN Discovered Via Their Hard X-Ray

This final report is a study of the Active Galactic Nuclei (AGN). Investigation of the soft x-ray spectra of AGN were performed by using their hard x-ray emission. ROSAT observations of AGN was also performed, which allowed for the study of these x-ray spectra and the structures of 7 clusters of galaxies.

Schwartz, Daniel↗
NASA NTRS1997

Graded Multilayers not Required for Hard X-ray Imaging!

For a given X ray optic, a graded-multilayer coating extends the energy response to higher energies. However, this does not imply that graded multilayers are required for efficient hard X ray focusing. Indeed, smaller X ray optics using conventional coatings provide advantages -- namely, greater effective area per unit mass, less diffractive scattering by surface micro-roughness, and demonstrated feasibility - over larger optics coated with multilayers.

Weisskopf, M. C.↗
NASA NTRS1997

The Hard X ray Telescope Mission

The Hard X Ray Telescope (HXT) was selected for study as a possible new intermediate size mission for the early 21st century. Its principal attributes are: (1) multiwavelength observing with a system of focussing telescopes that collectively observe from the UV to over 1 MeV, (2) much higher sensitivity and much better angular resolution in the 10100 keV band, and (3) higher sensitivity for detecting gamma ray lines of known energy in the 100 keV to 1 MeV band. The institutions collaborating in the study are: Smithsonian Astrophysical Observatory, Marshall Space Flight Center, Naval Research Laboratory, Goddard Space Flight Center, Argonne National Laboratory, Danish Space Research Institute, Osservatorio Astronomica di Brera (Merate), and Centre d'Etudes Spatiale des Rayonnements (Toulouse). The instrumentation includes several grazing incidence double conical telescopes with multilayer coatings that focus up to 100 keV and a single Laue crystal telescope that functions to 1 MeV. The detectors are CCDs, and germanium, and/or CdZnTe position sensitive arrays.

Gorenstein, Paul↗
NASA NTRS1998

Long-Term Variability and Transient Behavior of some Galactic Hard X-Ray Sources as Observed with BATSE

The Burst and Transient Source Experiment (BATSE) experiment on the Compton Observatory has been providing continuous, all-sky monitoring of the hard X-ray sky for over seven years. A wide variety of transient and high-variability phenomena are observed for about sixty Galactic neutron star and black hole systems. A daily sensitivity level of approximately 75 mCrab is attained for sources observed by Earth occultation in un-crowded regions and approximately 20 mCrab for pulsars with known periods. This talk will qualitatively describe the types of variability that are observed from some of the brighter sources, including their duty-cycle and the various time-scales observed. Implications for the INTEGRAL mission will be discussed.

Fishman, Gerald J.↗
NASA NTRS1999

The Observed Spectral Evolution of Solar Flare Hard X-Ray Emission

The spectral evolution of flare emission may be characterized using color-color diagrams (CCDs), a technique which has been widely employed by the astrophysics community, but not yet by the solar flare community. CCDs are constructed for a sample of flares observed simultaneously by CGRO/BATSE and Yohkoh/HXT. It is found that flare spectral evolution follows one of only a few patterns, which generally evolve differently than the soft-hard-soft pattern put forth as the norm in previous work. The implications for the nature of flare energy release and acceleration/propagation models are discussed

Newton, Elizabeth↗
NASA NTRS1999

Anticipating HESSI's View of Spectral Evolution in Flare Hard X-Ray Emission

The spectral evolution of observed flares' hard X-ray emission is found to conform to certain patterns in color-color diagrams (CCDs). By combining the spectral resolution of BATSE data with the spatial resolution of HXT data, we are able to address the nature of flare energy release and anticipate what kind of observations HESSI may make of the energy release/particle acceleration site in flares. The implications of these observations for theoretical models of acceleration and propagation is considered.

Newton, Elizabeth K.↗
NASA NTRS1999

Hard X-Ray and Wide Focusing Telescopes

The subject of this program are the development of two new type of X-ray telescopes, the wide field telescope, and the hard X-ray telescope.

Gorenstein, Paul↗
NASA NTRS1999

Discovery of Correlated Behavior Between the Hard X-Ray and the Radio Bands in Cygnus X-3

Using Compton Gamma Ray Observatory BATSE hard X-ray (HXR) data and GHz radio monitoring data from the Green Bank Interferometer, we have performed a long-term study (approx. 1800 days) of the unusual X-ray binary Cyg X-3, resulting in the discovery of a remarkable relationship between these two wavelength bands. We find that during quiescent radio states, the radio flux is strongly anticorrelated with the intensity of the HXR emission. The relationship switches to a correlation with the onset of major radio flaring activity. During major radio flaring activity, the HXR drops to a very low intensity during quenching in the radio and recovers during the radio flare. Injection of plasma into the radio jets of Cyg X-3 occurs during changes in the HXR emission and suggests that disk-related and jet-related components are responsible for the high energy emission.

McCollough, M. L.↗
NASA NTRS1998

Hard X-Ray Variability of the Black Hole Candidate GRO J0422+32 During its 1992 Outburst

We have studied the hard X-ray variability of the soft X-ray transient GRO J0422+32 with the Burst and Transient Source Experiment (BATSE) in the 20-100 keV energy band. Our analysis covers 180 days following the first X-ray detection of the source on 1992 August 3, fully covering its primary and secondary X-ray outburst. We computed power density spectra (PDSS) in the 20-50, 50-100, and 20-100 keV energy bands., in the frequency interval 0.002-0.488 Hz. The PDSs of GRO J0422+32 are approximately flat up to a break frequency and decay as a power law above, with index about 1. During the first 70 days of the X-ray outburst, the PDSs of GRO J0422+32 show a significant QPO Peak near about 0.2 Hz, superposed on the power-law tail. The break frequency of the PDSs obtained during the primary X-ray outburst of GRO J0422+32 occurs at 0.041+/-0.006 Hz; during the secondary outburst the break is at 0.081q0.01.5 Hz. The power density at the break ranged between 44 and 89% Hz(exp -1/2) 20-100 keV). The canonical anticorrelation between the break frequency and the power density at the break, observed in Cyg X-1 and other BHCs in the low state, is not observed in the PDSs of GRO J0422+32. We compare our results with those of similar variability studies of Cyg X-1. The relation between the spectral slope and the amplitude of the X-ray variations of GRO J0422+32 is similar to that of Cyg X-1.

VanderHooft, F.↗
NASA NTRS1999

A High-Pressure Gas-Scintillation-Proportional Counter for the Focus of a Hard-X-Ray Telescope

We are developing a high-pressure Gas Scintillation Proportional Counter (GSPC) for the focus of a balloon-borne hard-x-ray telescope. The device has a total active diameter of 50 mm, of which the central 20 mm only is used, and is filled with xenon + 4% helium at a total pressure of 10 6 Pa giving a quantum efficiency of greater than 85% up to 60 keV. The detector entrance is sealed with a beryllium window, 3-mm thick, which provides useful transmission down to 6 keV, way below the atmospheric cut-off at balloon float altitudes. Scintillation light exits the detector via a UV transmitting window in its base and is registered by a Hamamatsu position-sensitive crossed-grid-readout photomultiplier tube. Initial testing is underway, quantifying light yield and energy resolution. Following that, the spatial resolution and absolute efficiency will be calibrated. Simulations show that a spatial resolution of better than 0.5 mm FWHM should be achievable up to 60 keV, and this is well matched to the angular resolution and plate scale of the mirror system. The energy resolution will be around 5% at 22 keV. Full details of the instrument design and its performance will be presented. A first flight is scheduled for the Fall of 99, on a stratospheric balloon to be launched from Fort Sumner, New Mexico.

Austin, R. A.↗